SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

914-6 GT CHASSIS BUILD

projects / 914-6 gt chassis build

914-6 GT  CHASSIS BUILD

This 914-4 chassis was brought to us from Tx. for a complete chassis restoration. This included the chassis was stripped, sent over for a strip & acid bath to find all the history of this car. We then repaired the light rust & body damage, prepared for steel GT flares, drop floor pans (for tall driver) and complete competition cage system front to rear. Let us know if this is something you would like us to build for you !

See The 9 Parts We Use

914-6 GT JM chassis oil cooler prep 914-6 GT JM pan & sil 914-6 GT JM rear chassis kit 914-6 GT JM rear inner chassis kit 914-6 GT JM rear trunk reinforcement detail 914-6 GT JM rear trunk reinforcement 914-6 GT JM pass side roll cage 914-6 GT JM pass side roll cage out 914-6 GT JM chassis on rotis 914-6 GT JM chassis rear ready for sealer 914-6 GT JM chassis front ready for sealer 914-6 GT JM chassis rear in DTM 914-6 GT JM chassis front in DTM 914-6 GT JM chassis start 914-6 GT JM CHASSIS PASS SIDE 914-6 GT JM CHASSIS SEAM WELD

914-6 GT JM chassis oil cooler prep

914-6 GT JM pan & sil

914-6 GT JM rear chassis kit

914-6 GT JM rear inner chassis kit

914-6 GT JM rear trunk reinforcement detail

914-6 GT JM rear trunk reinforcement

914-6 GT JM pass side roll cage

914-6 GT JM pass side roll cage out

914-6 GT JM chassis on rotis

914-6 GT JM chassis rear ready for sealer

914-6 GT JM chassis front ready for sealer

914-6 GT JM chassis rear in DTM

914-6 GT JM chassis front in DTM

914-6 GT JM chassis start

914-6 GT JM CHASSIS PASS SIDE

914-6 GT JM CHASSIS SEAM WELD

914-6 GT CHASSIS BUILD Parts

914 Engine Mount for 914-6 Cyl 2.0 - 3.8L Engine Conversions - Weld In Type

914 Engine Mount for 914-6 Cyl 2.0 - 3.8L Engine Conversions - Weld In Type

Patrick Motorsports Exclusive
914 375 WIM PMS
10 In Stock
13.50 lbs

914 6 Engine Conversion Mount - (1970-1976) PORSCHE 914-4 to 2.0 - 3.6L H6 Engines - (Weld In) Bulk Head Cross Bracket Mount to Engine Support Carrier - Includes Urethane Isolation Bushings for Street & Track Use - 3D Optimized Design allows for pivoting engine for direct installation - TIG Welded Steel Fabrication - Black Powdercoat Finish (Bulk head support brackets raw steel finish for welding application) - PATRICK MS USA

+ Fully compatible with original / aftermarket exhaust heat exchangers, brake pressure regulator and original electrical wiring harness.

+ Replaces PNs:
901 115 012 00 - Engine Carrier Bracket
914 375 049 00 - Engine Mounting
914 375 057 00 - Base Upper
914 375 158 00 - Base Lower

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$460.00
914-6 GT Body Rocker Panel Set / Sill Cover Set - 914 6 GT Flared Wide Body 7&9 Inch

914-6 GT Body Rocker Panel Set / Sill Cover Set - 914 6 GT Flared Wide Body 7&9 Inch

Patrick Motorsports Exclusive
BOD 914 503 RPS GT
4.50 lbs

914-6 GT Body Rocker Panel Set / Sill Cover Set - (1970-1976) PORSCHE 914 / 914-6 To GT Flared / Wide Body 7 & 9 Inch Fender Flares- Option (M471) - Lightweight Composite - PATRICK MS USA

+ Replaces PNs:
914 503 125 10 - Sill Cover Left
914 503 126 10 - Sill Cover Right

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$350.00
914 Chassis Reinforcement Stiffening Kit

914 Chassis Reinforcement Stiffening Kit

Patrick Motorsports Exclusive
BOD 914 CRK PMP
24 In Stock
12.00 lbs

914 Chassis Reinforcement Stiffening Kit for Key Rear Axle Suspension Body Wheel Housing Paneling - (1970-1976) PORSCHE 914-4 / 914-6 - Application increases structural rigidity for increased handling performance. - Includes: 8 piece set Left / Right of specially shaped 16 gauge steel pieces for TIG or HELIARC welding installation - PATRICK MS USA

+ Recommend to use with PN: PMP914TABOX - 914 Rear Trailing Arm Suspension Box Set

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$160.00
Porsche 914 6 GT Body Fender Flare Set - Option M 471 - Steel

Porsche 914 6 GT Body Fender Flare Set - Option M 471 - Steel

Patrick Motorsports Exclusive
BOD 914 GT 79 SFS
21.00 lbs

Porsche 914 6 GT Body Fender Flare Set - (1970-1976) PORSCHE 914 to Option (M 471) Complete Set Front & Rear / Left & Right - For 7 & 9 Inch Wheels - High Quality Press Reproduction Steel - Weld On - PATRICK MS USA

+ Attaches to original exterior panelling wing front and rear. Welding fabrication required for installation.

 PATRICK MOTORSPORTS USA
$1,300.00
914 6 GT Front Bumper Cover Composite

914 6 GT Front Bumper Cover Composite

Patrick Motorsports Exclusive
BOD 914 GT FB WOC
3 In Stock
3.50 lbs

914 GT Style Front Bumper Cover - (1970-1976) PORSCHE 914 / 914-6 GT (Reproduction) - Includes Opening for Engine Oil Cooler Duct - High Quality Batch Production from Lightweight Composite Fiberglass - PATRICK MS USA

+ Includes Mounting Bracket Set

Replaces PNs:
914 505 009 10 - Front Bumper Chrome - (1970-1976)
914 505 009 11 - Front Bumper Chrome w/ Headlight Washer System - (1974-)
914 505 010 10 - Front Bumper Prime Coated (-1974)
914 505 084 10 - Front Bumper Chrome (1973-)
914 505 010 12 - Front Bumper Chrome w/ Headlight Washer System - (1974-)

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$495.00
914 GT Style Lower Front Valance - (Wide Body) - (1970-1976) PORSCHE 914 GT (Reproduction)

914 GT Style Lower Front Valance - (Wide Body) - (1970-1976) PORSCHE 914 GT (Reproduction)

Patrick Motorsports Exclusive
BOD 914 GT FL VAL
4 In Stock
7.00 lbs

914 GT Style Lower Front Valance - (Wide Body) - (1970-1976) PORSCHE 914 GT (Reproduction) - Includes Opening for Engine Oil Cooler Duct - High Quality Batch Production from Lightweight Composite Fiberglass - PATRICK MS USA

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$245.00
914 6 GT Rear Bumber Cover

914 6 GT Rear Bumber Cover

Patrick Motorsports Exclusive
BOD 914 GT RB
5 In Stock
3.50 lbs

914 GT Style Rear Bumper Cover - (1970-1976) PORSCHE 914 / 914-6 GT - High Quality Batch Production from Lightweight Composite Fiberglass - PATRICK MS USA

+ Includes Mounting Bracket Set

Replaces PNs:
914 505 019 10 - Rear Bumper Chrome - (-1973)
914 505 020 10 - Rear Bumper Prime Coated (-1973)
914 505 091 10 - Rear Bumper Prime Coated (1974-)
914 505 092 10 - Rear Bumper Chrome (1974-)
914 503 233 10 - Rear Bumper Base (1975-)

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$355.00
914 Body Front Hood Cover - With Headlight Openings

914 Body Front Hood Cover - With Headlight Openings

Patrick Motorsports Exclusive
BOD 914FGTH
2 In Stock
12.80 lbs

HOOD - FRONT - PORSCHE 914 6 TYPE WITH HEADLIGHT CUTOUTS - BACKSIDE REINFORCED - INCLUDES METRIC INSERTS FOR HOOD HINGE AND STRIKER - LIGHTWEIGHT COMPOSITE - 12.80 LBS. *REPRODUCTION 914-6 GT PART - SEE OUR PROJECTS GALLERY FOR THIS PART IN USE

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$900.00
Oil Cooler - Front Center Mount 500 COM  - 911 914 GT  / RS / RSR

Oil Cooler - Front Center Mount 500 COM - 911 914 GT / RS / RSR

Patrick Motorsports Exclusive
OIL 500 COM 22mm PMP
5 In Stock
7.65 lbs

Oil Cooler - Center Front Mount 500 COM - GT / RS / RSR - Competition Single Pass - Size: 23.50 x 5.50 x 2.25 Inches (59.69 x 13.97 x 5.72 cm) - 4x) 22mm Ports - 1.04L Capacity - Includes 4) 8mm Mounting bungs - Brazed Aluminum & Durable Epoxy Black Finnish - SETRAB / PATRICK MS USA EXCLUSIVE

* UNIONS & PORT PLUGS NOT INCLUDED

+ Supports vehicles to +600 HP range.
+ Specially Designed Production - Manufactured by Setrab of Sweden

 PATRICK MOTORSPORTS USASetrab
$640.00

Customer Testimonials

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!