SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

911 RSR IROC Street Racer | 3.8L DME | Euro 915

projects / 911 rsr iroc street racer | 3.8l dme | euro 915

911 RSR IROC Street Racer | 3.8L DME | Euro 915

This original 1979 930 chassis has been expertly converted to a lightweight 1974 911 RSR IROC inspired street racer! This chassis is fitted with a 1997, 993 Carrera 3.6L DME engine then converted to a high torque 3.8L displacement! Featuring hydraulic billet sport cams and married to a specially prepared, 1986 915 Euro transaxle gearbox with LSD and euro oil cooler system.

This one of kind project is 100% built in-house.

See The 55 Parts We Use

930 IROC eng detail 1 930 IROC interior detail 1 930 IROC rear grill detail 930 IROC R side 930 IROC L front qtr 16 930-IROC-painted_FRONT_END 04 930 IROC 38L DME Seat Roll Bar 05 JP-1974-911-IROC-RSR-38L-915-FRONT-UNDER 06 930 IROC rear exhaust fabrication 12 930 IROC header fabrication 07 JP-1974-911-IROC-RSR-38L-915_REAR-UNDER 08 JP-1974-911-IROC-RSR-38L-915-EURO-TRANSMISSION 11 930 IROC 38L DME Engine 09 930 IROC Centerforce Clutch Installed 10 930 IROC Centerforce Clutch 13 JP-1974-911-IROC-RSR-38L-915-ENGINES 14 JP-1974-911-IROC-RSR-38L-915-ENGINE-BEARINGS-COATED-MAIN 18 930 IROC rear qtr & cage 17 JP-1974-911-IROC-RSR-38L-915-RIGHT-REAR-ARM 19 930 IROC L rear qtr 20 930 IROC L rear qtr prep

930 IROC eng detail 1

930 IROC interior detail 1

930 IROC rear grill detail

930 IROC R side

930 IROC L front qtr

16 930-IROC-painted_FRONT_END

04 930 IROC 38L DME Seat Roll Bar

As you can see the Patrick Motorsports 911 / 930 Roll Bar fits like a champ! Also shown our custom interior works with the hounds tooth seat inserts!

05 JP-1974-911-IROC-RSR-38L-915-FRONT-UNDER

06 930 IROC rear exhaust fabrication

12 930 IROC header fabrication

Porsche 911 exhaust header manifold fabrication to 73 RSR style muffler. This 3.8L engine will get the 1.75 Inch O.D. primaries and our tuned, high velocity merge collectors! The muffler shown is just for fixturing purposes. We will add our RSR Wide Center tip muffler next!

07 JP-1974-911-IROC-RSR-38L-915_REAR-UNDER

08 JP-1974-911-IROC-RSR-38L-915-EURO-TRANSMISSION

11 930 IROC 38L DME Engine

09 930 IROC Centerforce Clutch Installed

10 930 IROC Centerforce Clutch

This torquey 3.8L DME engine is getting our 225mm Billet Steel Conversion Flywheel and the legendary Centerforce clutch that will be mated to a 915 Euro Transmission. Also shown are the new shorter transmission case studs, camshaft block off plates and engine oil feed pipes. And of course the flywheel and clutch package is precision computer balanced!

13 JP-1974-911-IROC-RSR-38L-915-ENGINES

14 JP-1974-911-IROC-RSR-38L-915-ENGINE-BEARINGS-COATED-MAIN

18 930 IROC rear qtr & cage

17 JP-1974-911-IROC-RSR-38L-915-RIGHT-REAR-ARM

19 930 IROC L rear qtr

20 930 IROC L rear qtr prep

911 RSR IROC Street Racer | 3.8L DME | Euro 915 Parts

Flywheel - 911 / 915 225mm Conversion to 964 & 993 3.6L DME Engines

Flywheel - 911 / 915 225mm Conversion to 964 & 993 3.6L DME Engines

Patrick Motorsports Exclusive
22536DMEFW PMP
9.50 lbs

Flywheel - 225mm - 3.6L DME (964 / 993) Engine Conversion to 915 / 901 (With Adapter) Transmissions - (60-2 tooth Timing Reference) - 9 Bolt Crankshaft - Sport Lightweight Single Mass - Billet Steel 9.50 Lbs (4.31 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing
+ Includes: Certified Rotational Balancing
+ Use with PN: PKG 915 930 G50 SBH ECS - Engine to Transmission Case Mounting Stud Set
+ Use with PN: 964 101 187 01 - Support Bracket for Crankshaft Pulse Sender Reference Sensor
+ Use with PN: 911 606 217 03 SS < 996 606 105 00 - Crankshaft Pulse Sender Reference Sensor

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$425.00
Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Patrick Motorsports Exclusive
36 CAM BLOCK PMP
14 In Stock
0.18 lbs

Camshaft Block Off Cover Plate Adapter - (1989-1998) PORSCHE 964 / 993, 3.6L Engines - Installs onto cam carrier housing for power steering delete conversion & LH camshaft cover - Features Low profile for non standard camshafts & exhaust header clearance - Billet Aluminum 6061-T6 Mil-Spec Black Anodized - PATRICK MS USA + 964 use 1 per car / 993 use 1 or 2 per car

+ Includes: 999 707 293 40 - O-Ring 40 x 4

+ Replaces PNs:
964 147 185 02 - PS Drive Bracket
964 147 185 05 - PS Drive Bracket
993 105 117 02 - Camshaft Cover LH Side
993 147 185 02 - PS Drive Bracket

+ Also can be used on 911 / 930 (Air Injection Delete)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$75.00
3.8L Engine Displacement Badge

3.8L Engine Displacement Badge

Patrick Motorsports Exclusive
38L BADGE PMP
42 In Stock
0.01 lbs

** SUMMER SPECIAL! Was $48.00, you save $9.00 **
Discount for a limited time only.

Engine Displacement Badge Logo Decorative Fitting - (3.8) - Billet Aluminum with black powder coat finish - PATRICK MS USA

+ Includes studs mounting hardware for rear deck lid ventilation grill cover or for cockpit interior installation.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$39.00
911 930 965 Rear Tow Hook Skid Protection Plate Jack Point

911 930 965 Rear Tow Hook Skid Protection Plate Jack Point

Patrick Motorsports Exclusive
901 115 014 RTH PMS
4 In Stock
1.25 lbs

Rear Tow Hook / Skid Protection Plate / Jack Point - Porsche 911 - 930 - 965 Turbo - For cars equipped with B&B header systems - Red Powder Coated TIG welded steel - 4 point mounting to engine carrier and case - PATRICK MS USA

**Protect your B&B exhaust header system from the all too common damage! THIS GIVES YOU A REAR JACKING POINT WITHOUT USING THE LOWER SIDE OF THE MOTOR AND A POINT TO PULL FROM IF YOU SLIDE OFF THE TRACK OR ROAD.

 PATRICK MOTORSPORTS USA
$185.00
911 914 FUEL SYSTEM CONVERSION ADAPTER SET TO 993 3.6L

911 914 FUEL SYSTEM CONVERSION ADAPTER SET TO 993 3.6L

Patrick Motorsports Exclusive
901 200 993 PMS
4.00 lbs

911 - 914 Fuel System Conversion Set - (1994-1998) 993 (3.6L DME) Engine to 911 & 914 Chassis - Complete set includes all new metric unions, SS clamps, hardware, high pressure EFI fuel line to tank & new fuel filter - Original factory hardware & appearance - COHLINE / MAHLE / PATRICK MS USA

+ Use with PN: 964 620 104 00 - Fuel Pump

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONCohlineMAHLEGENUINE PORSCHE
$150.00
Engine Case Stud to (SBH) Transmission Adapter Set - 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing)

Engine Case Stud to (SBH) Transmission Adapter Set - 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing)

Patrick Motorsports Exclusive
901 915 930 G50 SBH PMS
4 In Stock
0.50 lbs

Engine Case Stud to (SBH) Transmission Adapter Set - Use to mount PORSCHE 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing) 4 & 5 Speed Transmissions to (1978-1989) 930 Turbo 3.3L & (1990-On) 3.6L engine cases - 4 Stud Set (M10) - GENUINE PORSCHE

+ Application Notes: - Torque Spec: 45 Nm (33 ftlb)

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION PMS 915 CONVERSIONGENUINE PORSCHE
$40.00
License Plate Light Kit - Retro Euro Style HELLA

License Plate Light Kit - Retro Euro Style HELLA

Patrick Motorsports Exclusive
901 BOD 63 26 LPL PMS
0.10 lbs

License Plate Light Kit - Includes Chrome Housing, Black Rubber Base Gasket & 1 Qty License Plate Light Bulb (12V-3W) - HELLA / OSRAM SYLVANIA - MSRP: $90.86 Each / 1 or 2 Per Vehicle

+ Note: For black or colored housing, simply paint to match.
THIS ITEM IS NO LONGER AVAILABLE

 PATRICK MOTORSPORTS USAHella
$0.00
Engine Oil Feed Pipe Adapter - 911 S Hose to 993 3.6L Engines

Engine Oil Feed Pipe Adapter - 911 S Hose to 993 3.6L Engines

Patrick Motorsports Exclusive
911 107 993 OP PMP
0.50 lbs

993 Engine Oil Feed Pipe Adapter - (1970-1989) 911 / 930 Oil Tank S (Suction) Hose to (1994-1998) 993 3.6L Engine | Oil feed plug in union pipe at case half right side - Stainless Steel with o-rings & hardware - PATRICK MS USA

+ Replaces PN: 993 207 250 04 - Oil Pipe
+ Connects to PNs: 911 107 233 00 / 930 107 233 02 - Oil Suction Hose

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSION
$145.00
Front Center Mount Oil Cooler Set - 911 930 RSR Style

Front Center Mount Oil Cooler Set - 911 930 RSR Style

Patrick Motorsports Exclusive
911 207 FMOC RSR
12.00 lbs

911 RS / 930 RSR Style Front Center Mount Oil Cooler Set - Supplement kit for cars with (1969-1989) PORSCHE 911 Carrera / 930 Turbo right front fender mounted oil coolers. Typical Hose Line Lengths: 1) Qty. 38 Inches (965mm) & 1) Qty. 65 Inches (1651mm)

OIL COOLER Size: 23.50 x 5.50 x 2.25 Inches (59.69 x 13.97 x 5.72 cm) - 4x) 3/4 NPT Ports - 1.04L Capacity

+ Complete installation kit: Custom Setrab Cooler, AN-12 SS braided oil hose / fitting set.

Will mount directly to original 30mm Fitting on Hard Lines.

+ Use only with front bumper with oil cooler duct opening.

+ Ideal for use on engine conversions, Turbo, sport and racing cars.

 PATRICK MOTORSPORTS USAGoodridgeSetrab
$905.00
Spring Plate Bushing Set

Spring Plate Bushing Set

Patrick Motorsports Exclusive
911 333 RDSPBUSHL
1.30 lbs

911/930 1969-1989 - REAR SPRING PLATE BUSHING SET - DELRIN

 PATRICK MOTORSPORTS USA
$140.00
911 912 914 930  Front Suspension Control Arm Set

911 912 914 930 Front Suspension Control Arm Set

Patrick Motorsports Exclusive
911 341 900 PMS
20.00 lbs

Front Control Arm Set - PORSCHE 911 / 914 / 930 Turbo Front Axle Suspension - Modified for early type through body anti sway bar - D Loop style mounts replaced with U tab style drop link connectors - Reconditioned set includes Left / Right control arms (911 Spline) complete with forward / aft bushing brackets - Black power coated finish. | PATRICK MS USA

$200.00 CORE CHARGE, PN: CORE PMP 911 914 FCAKT THESE MUST BE PORSCHE 911 TYPE WITH 911 SPLINES AND INCLUDE THE CARRIER BEARINGS>
- 911 Front Axle Control Arm Assembly Set
+ Include Complete Left & Right Set of: Control Arms & Bearing Retainer Brackets

Tech Tip:
IF YOU’RE LOOKING FOR MORE RESPONSIVE RIDE AND HANDLING USE THE DELRIN BUSHINGS ON ALL SUSPENSION MOUNTS. THE FACTORY RUBBER MOUNTS WILL SOFTEN WITH AGE AND THIS WILL CAUSE LOOSE AND UNRESPONSIVE HANDLING

+ Replacement Bushings available in precision machined Delrin or original style rubber.

 PATRICK MOTORSPORTS USAPATRICK USED PARTSGENUINE PORSCHE
$680.00
911 - 914 - 930 Front Lower Control Arm Bearing Bushing Set

911 - 914 - 930 Front Lower Control Arm Bearing Bushing Set

Patrick Motorsports Exclusive
911 341 901 PMS
26 In Stock
1.00 lbs

Front Lower Control Arm Bearing Bushing Set - Late - (1969-1989) PORSCHE 911 / 914 / 930 - Sport / Motorsport Semi-Solid Type - Machined Delrin® - PATRICK MS USA

+ 4 Piece Set / 1 Set Per Car & Includes Installation Instructions
+ Installs onto PNs: 911 341 901 00 / 911 341 902 00 / 930 341 901 00 / 930 341 902 00 - Control Arm L/R
+ Extremely durable, self lubricating with Teflon® & will not squeak.

PORSCHE did not offer replacement bushings for the front lower control arms but instead they offered entire replacement arms inclusive of newer rubber bushings. These parts are specially developed to replace the original equipment rubber with a hard plastic material known as Delrin® while re-using the original control arms.

 PATRICK MOTORSPORTS USA
$110.00
Front Strut Brace - Suspension - PORSCHE 911 / 912 / 930 / Turbo

Front Strut Brace - Suspension - PORSCHE 911 / 912 / 930 / Turbo

Patrick Motorsports Exclusive
911 341 FSB
3.50 lbs

Front Strut Brace - Spans the stock towers - PORSCHE 911 / 912 / 930 / Turbo - Lightweight polished aluminum tube with steel zinc plated adjustable tension ends - PATRICK MS USA

This is must have for any early chassis looking to increase rigidity for better handling performance.

 PATRICK MOTORSPORTS USA
$210.00
911 / 930 Roll Bar Cage Harness Coupe Chassis Suspension

911 / 930 Roll Bar Cage Harness Coupe Chassis Suspension

Patrick Motorsports Exclusive
911 930 SARB PMP
10 In Stock
80.00 lbs

Roll Bar - 911 / 930 Coupe - 4 Point Weld In Stand Alone with Integral Harness Bar - Designed for all (1969-1989) 911 / 930 Turbo Coupe models (Not for Cabrio / Targa) - TIG Welded Construction with 1.75 x .120 Inch DOM Steel Tubing - PATRICK MS USA - CERTIFIED BATCH PRODUCTION

+ Designed for motorsport use only.
+ Conforms / Exceeds PCA / SCCA / FIA specifications.* Please check local racing regulations for updates before ordering.

PLEASE CONTACT US BY PHONE OR EMAIL TO PLACE AN ORDER

+ Freight Domestic: $190-250 Range - Please contact us for current estimates or international shipping rates.
+ Custom Satin black finish powder coat $100 Additional. Optional colors available - Please contact us for options.
+ Please see our 911 / 930 project gallery for installation images.

 PATRICK MOTORSPORTS USA
$700.00
911 - 930 Accelerator Throttle Cable Conversion Kit to 964 / 993 3.6L DME Engines

911 - 930 Accelerator Throttle Cable Conversion Kit to 964 / 993 3.6L DME Engines

Patrick Motorsports Exclusive
911 964 993 TC PMS
2 In Stock
0.50 lbs

911 / 930 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine - (1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines - PATRICK MS USA

+ Includes adjustable Delrin bulk head fitting
+ Includes installation instructions

Application:
(1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines

Designed to replace the original throttle cable assembly PNs:
PCG 423 024 00 – Throttle Linkage
901 423 223 01 – Extension Rod

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONGENUINE PORSCHE
$290.00
Quick Ratio Steering Rack Assembly 911 912 914 930

Quick Ratio Steering Rack Assembly 911 912 914 930

Patrick Motorsports Exclusive
914 347 010 06 QS PMS
8.00 lbs

Close Ratio Steering Rack Assembly - PORSCHE 914 / 911 / 912 / 930 / Turbo - Quickens Ratio 2.50 Lock to Lock - Pre assembly with QUAIFE PN: 40.435.001 - Ring & Pinon Set - Precision machined housing and ring and pinion set-up - Direct replacement pre-built unit by PATRICK MS USA
+ CORE CHARGE $ 300.00

 PATRICK MOTORSPORTS USAGENUINE PORSCHEQuaife
$1,325.00
911 930 Turbo Tie Rod Assembly steering Conversion

911 930 Turbo Tie Rod Conversion Assembly - Front Axle Steering - Sport | Racing - All Models -1989 PORSCHE 911 / 912 / 914 / 930 Turbo - LEMFOERDER / PATRICK MS USA

LemfoerderGENUINE PORSCHE
$225.00
Engine Suspension Bracket Support (Cross Member) - RSR Style 911 / 930 / 965

Engine Suspension Bracket Support (Cross Member) - RSR Style 911 / 930 / 965 Motorsport - Attaches to Motor Console - Lightweight / Rigid Reinforced Fabricated Steel - Black Finish - PATRICK MS USA

+ Replaces PN: 930 375 011 01 - (1965-1989) 911 / 930 / 964 Turbo (3.3L)
+ Includes Mounting Hardware / Bolt Set

 PATRICK MOTORSPORTS USA
$225.00
G50 SBH Transmission Carrier Mount Block Adapter Set - PORSCHE 930 Turbo

G50 SBH Transmission Carrier Mount Block Adapter Set - PORSCHE 930 Turbo

Patrick Motorsports Exclusive
930 G50 SBH 930 78 85 PMS
4 In Stock
2.00 lbs

G50 SBH Transmission Carrier Mount Block Adapter Set - (1978-1985) PORSCHE 930 Turbo to (1987-1989) G50 / 00 / 01 / 02 / 50 SBH (Short Bell Housing) Transmissions - Weld-in on factory torsion bar - Billet Steel - Includes Mounting Hardware - PATRICK MS USA

+ For use with PNs: 911 375 031 09 - Transmission Carrier Mount

 PATRICK MOTORSPORTS USAPMS G50 CONVERSION
$110.00
911 - 930 - 914 Single Belt Engine Crank Pulley & Fan Drive Set to 993 3.6L / RSR Conversion

911 - 930 - 914 Single Belt Engine Crank Pulley & Fan Drive Set to 993 3.6L / RSR Conversion

Patrick Motorsports Exclusive
993 102 050 SBCF PMS
5 In Stock
2.00 lbs

993 Single Belt Engine Crankshaft Pulley & Fan Drive Set - (1965-1989) 911 / 914 Single Belt (No AC) to (1994-1998) PORSCHE 993 / 3.6L Engines or to (1994-1998) 993 RS / RSR Conversions - Only for 993 cylindrical (straight) hub end crank - 6061 T6 Billet Aluminum Alloy, Mil-Spec Black Anodized - PATRICK MS USA

Set Includes:
1) RS Fan Alternator Drive Hub
1) Crank Pulley
1) Hexagon Head Bolt (Torque Spec: 110 ft/lbs (149 Nm) | Blue Loctite Recommended)
1) Belt 10x750

+ Replaces PN: 993 102 050 40 - Crankshaft Pulley (3 Groove / Belt) (non-tapper end)
+ Replaces PN: ENG 964 106 051 30 - Fan Hub with Bearing for Engine Cooling Impeller

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$385.00
Engine Valve Spring & Ti Retainer Set HP 8mm - 993

Engine Valve Spring & Ti Retainer Set HP 8mm - 993

Patrick Motorsports Exclusive
993 105 901 HP PMS
2.15 lbs

Engine Valve Spring & Ti Retainer Set for High Performance, Lightweight Valve Control on all 3.6-3.8L Cylinder Heads (1995-1998) PORSCHE 911 / 993 / Turbo - Ideal for all Street / Sport / Racing Engines - PATRICK MS USA

+ 1 Qty. Set Per Engine - Set Includes: 12) HP Sport-Racing Engine Valve Springs (Inner / Outer Springs), 12) Ti (Titanium) 8mm Spring Retainers, 12) Spring Seats

 PATRICK MOTORSPORTS USA
$860.00
964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive

964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive

Patrick Motorsports Exclusive
993 106 051 80 PMS
10 In Stock
0.50 lbs

964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive - Converts To Single Belt Drive - Ideal for Sport / Motorsport / Engine Conversions - Updated Reproduction of the Original Porsche Motorsport / Euro RS Unit - CAD Designed Lightweight Optimized - 6061-T6 Billet Aluminum Alloy - Mil Spec. Black Anodized - (PMP36FANHUB) - PATRICK MS USA

+ Made for use with original or stud conversion hardware.
+ Replacement for PN: 964 106 051 30 - Original Fan Hub With Bearing
+ Reproduction of 911 Carrera RS Part Number: 993 106 051 80 – Wheel Hub for Engine Code: M64.20

 PATRICK MOTORSPORTS USA
$140.00
993 Engine Air Injection Secondary Smog Pump Port Plug Block Off Set (SAI)

993 Engine Air Injection Secondary Smog Pump Port Plug Block Off Set (SAI)

Patrick Motorsports Exclusive
993 113 200 AIB PMS
5 In Stock
0.30 lbs

993 Air Injection Port Plug Block Off Set - (1995-1998) PORSCHE 993 / Turbo 3.6L DME Engines - SAI (Secondary Air Injection) - Installed in top left / right side of camshaft housings - PATRICK MS USA

+ Includes specially designed billet screw plugs and seal ring sets.

Replaces PNs:
900 915 005 02 - Connection Piece
900 123 019 30 - Sealing Ring
993 113 275 01 - Air Tube Left
993 113 288 02 - Air Tube Right
993 624 103 00 / 993 624 103 01 - Air Injection Pump
993 113 250 03 - Check Valve
993 113 251 05 - Distributor Housing
+ All air injection ancillary parts.

The 993, 3.6L DME engines included a secondary air injection system to meet emission control standards. The components of this air injection system consisting of air tubes, distributor housing, check valve and air pump assembly. Working with the exhaust catalytic converter emission control system, it functions to reduce emissions on cold engine start up by injecting air into the engine camshaft housings flowing down through the exhaust ports. When installing and converting to the (1994-1998) 993, 3.6L DME engines to pre 1995 chassis, or race cars, the pump assembly can be removed saving weight and complexity.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$30.00
Ignition Coil Mount Adapter (Dual) - 993 Carrera 3.6L DME Engines

Ignition Coil Mount Adapter (Dual) - 993 Carrera 3.6L DME Engines

Patrick Motorsports Exclusive
993 602 CAM PMP
10 In Stock
2.00 lbs

Ignition Coil Mount Adapter (Dual) - (1994-1998) PORSCHE 993 Carrera 3.6L DME Engines to 911 / 930 / 914 Engine Conversions - Mounts to Left Side Fan Housing - Black Wrinkle Powdercoated - PATRICK MS USA

+ Use with PN: 993 602 071 01 - Ignition Coil Set (Dual)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$120.00
993 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - 964 Chassis

993 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - 964 Chassis

Patrick Motorsports Exclusive
993 612 173 DME PMS
5 In Stock
1.50 lbs

993 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 / 964 Chassis to (1995-1998) PORSCHE 993 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

OUR HARNESSES MAKE YOUR ENGINE SWAPS A PLUG AND PLAY OPERATION, NO DAMAGED COMPONENTS BY INCORRECT WIRING! ALSO RETAIN THAT FACTORY INSTALLED LOOK.

Interfaces PNs:
993 612 173 14 - Wiring Harness NR.173 - DME - (1994)
993 612 173 27 - Wiring Harness NR.173 - DME - (1995)
993 612 173 33 - Wiring Harness NR.173 - DME - (-1997)
993 612 173 35 - Wiring Harness NR.173 - DME - (1998)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONGENUINE PORSCHE
$395.00
911 IROC DP RS Style Front Spoiler Bumper Cover - (1974-1989) PORSCHE 911 / 930 Turbo (WIDE BODY)

911 IROC DP RS Style Front Spoiler Bumper Cover - (1974-1989) PORSCHE 911 / 930 Turbo (WIDE BODY)

Patrick Motorsports Exclusive
BOD 911 505 IROC DP FB 9W
15.00 lbs

911 IROC DP RS Style Front Spoiler Bumper Cover - (1974-1989) PORSCHE 911 / 930 Turbo (Short Hood) - 9 Inch (Wide Body) - Includes Front Center Mount Oil Cooler & Brake Cooling Duct Openings & Mounting Studs - High Quality Batch Production from Lightweight Composite Fiberglass - PATRICK MS USA

+ Use with PN: 000 043 204 81 - Seal
+ Utilizes original 2x PN: 911 631 411 00 - Side Marker Lights
+ Recommend for use with rear deck lid ventilation grill for factory look.
+ Use with PN: 000 043 204 81 - Seal
+ Utilizes original 2x PN: 911 631 411 00 - Side Marker Light
+ Recommended for use with rear decklid ventilation grill for factory look.

+ Note: Product may have different features, please contact us for more information at time of order.

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$885.00
911 IROC / RSR Rear Bumper Cover - (1974-1993) 911 / 930 Turbo with 11 Inch (Wide Body) Rear Flares

911 IROC / RSR Rear Bumper Cover - (1974-1993) 911 / 930 Turbo with 11 Inch (Wide Body) Rear Flares

Patrick Motorsports Exclusive
BOD 911 505 IROC RB 11W
3 In Stock
5.00 lbs

911 IROC / RSR Rear Bumper Cover - (1974-1993) 911 / 930 Turbo with 11 Inch (Wide Body) Rear Flares - High Quality Batch Production from Lightweight Composite Fiberglass - PATRICK MS USA

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$875.00
Brake Rotor Disc - Front Left - 911 - 930

Brake Rotor Disc - Front Left - 911 - 930

BRA 930 351 047 02 SEB
15.30 lbs

Brake Rotor Disc - Front Left - (1986-1989) 911 Turbo Look / 930 Turbo - SEBRO COATED (205189) - MSRP: $284.97

SEBRO
$170.00
Brake Rotor Disc - Front Right - 911 - 930

Brake Rotor Disc - Front Right - 911 - 930

BRA 930 351 048 02 SEB
15.37 lbs

Brake Rotor Disc - Front Right - (1986-1989) 911 Turbo Look / 930 Turbo - SEBRO COATED (205190) - MSRP: $281.22

SEBRO
$170.00
Brake Line Set - F/R

Brake Line Set - F/R

BRA 99 5522 101
0.44 lbs

Brake Hose Set - Steel Braided with Clear Protective Jacket - DOT Approved - 1969-1989 PORSCHE 911 / 930, 1970-1972 PORSCHE 914 - 4 Piece Set - Front / Rear, TROUTMAN , MSRP: $138.50

 PATRICK MOTORSPORTS USA
$126.00
Brake Fluid - TORQUE Racing Brake Fluid (500 ml) Bottle

Brake Fluid - TORQUE Racing Brake Fluid (500 ml) Bottle - Exceeds DOT 4 specifications. - MSRP: $33.95 Each : OUT OF STOCK

+ For Performance Street and Motorsport use.
+ Dry Boiling Point: 361 deg. C (683 deg. F). Wet Boiling Point: 226 deg. C (439 deg. F)

TORQUE BRAKE FLUID
$33.95
Clutch Kit 911 - 915 Sport Lightweight Aluminum Centerforce Dual Friction

Clutch Kit 911 - 915 Sport Lightweight Aluminum Centerforce Dual Friction

Patrick Motorsports Exclusive
CLU DF991002
1 In Stock
15.16 lbs

Clutch Set - 225 mm Sport Lightweight (1972-1986) PORSCHE 911 / 915 Transmission - Matched High Clampload 9.50 Lbs. (4.31 Kg) Aluminum Pressure Plate & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA

+ Torque Capacity rated at 430 ft/lbs.
+ Includes PN: 915 116 082 80 - Clutch Release Bearing

+ NOTE: This kit is based on the SACHS Power Clutch Kit (3000 961 101) with the aluminum clutch pressure plate cover, sprung hub disc and also includes the release bearing.

+ For high performance cast iron clutch cover option, use PN: DF200199

PATRICK CLUTCHESCenterforce - The Performance Clutch
$1,780.00
Electric Starter - 901 / 915 / 930 / G50 Transaxles & VW / Porsche Type I

Electric Starter - 901 / 915 / 930 / G50 Transaxles & VW / Porsche Type I

Patrick Motorsports Exclusive
ELE 911 604 101 N HTS
5 In Stock
8.80 lbs

Electric High Torque Starter - PORSCHE (1965-1989) 914 / 911 - 901 / 915 / 930 / G50 Transaxles & VW / Porsche Type I Bell Housing - High Torque Gear Reduction - 9 Tooth Pinion Gear - CCW Rotation - 1.4 kW 12V - Rotatable Index - 4.44 to 1 Gearing - Genuine Nippon Denso starter motor / Aluminum Adapters - Compact Light weight (< 9 Lbs) - IMI-101N Batch Production - PATRICK MS USA

 PATRICK MOTORSPORTS USA
$285.00
Engine Camshaft Set - 993 Super Sport Mechanical Rocker

Engine Camshaft Set - (993 Super Sport Mechanical Rocker) - PORSCHE 911 / 930 / 964 / 993 - SOHC 12V | 49mm O.D. Journals / 4 Bearing | #296 | New Billet Special Grind - WEB CAM -

+ Specify end drive requirements (P-S / Scavenge / Both)

Web Cam
$1,075.00
Engine Mount - 911 -930 Club Sport M637

Engine Mount - 911 -930 Club Sport M637

ENG 911 375 043 07
0.67 lbs

Engine / Transmission Mount - Club Sport (Option: M637) - 911 / Cabrio - Convertible / Targa / Speedster / 930 Turbo - GERMAN - MSRP: $92.74 Each

+ Engine Mounting 2 Per Car or with 915 Transmission, 4 Per Car

* WE ALSO STOCK ALL ENGINE & TRANSAXLE MOUNTING HARDWARE INCLUDING THE CLAM SHELL WASHERS!

Original Equipment Supplier
$45.00
993 Engine Solid Rocker Arm Valve Control Conversion

993 Engine Solid Rocker Arm Valve Control Conversion

ENG 993 105 043 99
2 In Stock
6.85 lbs

Solid Rocker Arm Valve Control Conversion - (1994-1998) 993 / RS / RSR / All Models - (Retro-fit Kit to Convert from Hydraulic to Manual Valve Adjustment) - Contains: Rocker Arms, Special Oil Lubricated Rocker Shafts, Adjusting Screws, Nuts & Valve Cover Gasket Set. - GENUINE / PATRICK MS USA

Engines running at higher RPM tend to float the valves resulting in power loss. This set with performance valve springs are a must for any hard driven engine or with camshaft upgrades!

 PATRICK MOTORSPORTS USAGENUINE PORSCHE
$2,650.00
Piston & Cylinder Set - 964 NA (Non Turbo) 102mm Bore (3.6L to 3.8L)

Piston & Cylinder Set - (1989-1994) PORSCHE 964 NA (Non Turbo) 102mm Bore (3.6L to 3.8L) 12.3:1 (107mm O.D. Cylinder Sleeve | Slip Fit into Engine Case) - MAHLE MOTORSPORTS

+ Set Includes: 6) PP102-011 - Piston & 6) PC102-002 - Cylinders
+ Application Note: Replaces PN: PS102-003

MAHLE MOTORSPORT
$5,700.00
Oil Pressure Sending Unit 3.2L- 3.6L Engine Conversion - Dual Pole

Oil Pressure Sending Unit 3.2L- 3.6L Engine Conversion - Dual Pole

Patrick Motorsports Exclusive
ENG36 OIL PS2 PMS
0.50 lbs

Oil Pressure Sending Unit for Gauge - Application to (1965-1977) PORSCHE 911 (with 0-10 Bar Gauge) to 3.2L & 3.6L DME Engine Conversion - Includes Double Pole Type Sender for Oil Pressure & Warning Light (0-10 Bar | 150 PSI), M18 Adapter Fitting & Seal Ring - VDO SIEMENS / PATRICK MS USA

+ Replaces PNs:
928 606 203 01 SS - Oil Pressure Sender (Superseded to: 928 606 203 04)
911 606 135 00 - Oil Pressure Sender (0-5 Bar)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONVDO
$85.00
Sport Exhaust Silencer Muffler 914-6 GT - 911 RSR Wide Style Dark Gray Ceramic

Sport Exhaust Silencer Muffler 914-6 GT - 911 RSR Wide Style Dark Gray Ceramic

Patrick Motorsports Exclusive
EXHESM RSR GRY
23.00 lbs

Sport Exhaust Silencer Muffler - Wide - PORSCHE 911 RSR Style for early 911 and 914-6 (with dual bank heat exchangers / headers) - Features Dual (50mm) Inlets & Dual (63.50mm / 2.50 Inch) Outlets - Wider style tip Center to Center 756 mm (29.75 Inches) - Mild steel construction with Ceramic Satin Dark Grey Finish - DANSK / PATRICK MS USA

 PATRICK MOTORSPORTS USADansk
$900.00
Air Filter - Universal Performance

Air Filter - Universal Performance

FIL RU-3130
0.90 lbs

Air Filter - Universal Performance * used on 993 engines 1995 1996 1997 & 1998 this fits directly to the MAF ( mass air flow meter ) - Round Tapered - Flange I.D. 3.50 In (89mm) | Base O.D. 4.625 In (117mm) | Top O.D. 3.50 In (89mm) | Rubber / Cotton Gauze - K&N
+ Use with PN: RU-3130DK

PMS 914 ENGINE CONVERSIONK&N Filters
$48.00
Transmission Gear Lube Oil - SWEPCO 201

Transmission Gear Lube Oil - SWEPCO 201

FLU SWEPCO 201-90
5.00 lbs

Gear Lube Oil - SWEPCO 201 - SAE 80W/90 - Includes Moly Additive - SWEPCO - Unit 1 Gallon

+ Recommended for use with Racing type transmissions & cars equipped with LSD differentials.
+ No Air Shipping Service (Ground Only)

SWEPCO
$60.00
Fuel Pressure Regulator (4.0 bar)

Fuel Pressure Regulator (4.0 bar)

FUE 0 280 160 575
0.10 lbs

Fuel Pressure Regulator (4.0 bar) - OEM BOSCH (078 133 534 C) - MSRP: $180.00
+ Replacement for original equipment regulators (3.8 Bar) found on (1995-On) PORSCHE, 993, Boxster & 996
+ Use for increased fuel enrichment on high performance engine applications.
+ For Adjustable Type, Use PN: FUE 5271

Bosch
$98.00
Fuel Pump 911 - 964 - 993 3.6L

Fuel Pump 911 - 964 - 993 3.6L

FUE 964 620 104 00
2.23 lbs

Fuel Pump - (1989-1998) 911 Carrera 4 / 2 / 3.6L Naturally Aspirated External Pump - (Silver Housing) - OEM BOSCH (0 0580 464 058) - MSRP: $652.53

Bosch
$260.00
Oil Crossover Pipe to External Thermostat

Oil Crossover Pipe to External Thermostat

OIL 911 107 729 10
3.00 lbs

Oil Line - Oil Crossover Pipe to External Thermostat - (1974) PORSCHE 911 - 2.7L - GENUINE PORSCHE, MSRP: $292.98

CohlineGENUINE PORSCHE
$165.00
Oil Crossover Pipe from Engine 911

Oil Crossover Pipe from Engine 911

OIL 911 107 739 10
2.10 lbs

Oil Crossover Pipe from Engine - (Passes under transmission) - CAD Plated Steel - Length Approx. 850mm - GENUINE PORSCHE - MSRP: $179.11

PMS 911 ENGINE CONVERSIONCohlineGENUINE PORSCHE
$135.00
Adapter Fitting - (M22 to AN-12) - For ProLine Oil Coolers

Adapter Fitting - (M22 to AN-12) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $12.00

Setrab
$11.00
Heat Exchanger / Oil Cooler - 50 Row Pro Line STD 1 Series - Setrab

Heat Exchanger / Oil Cooler - 50 Row Pro Line STD 1 Series - (6.42 x 15.31 x 1.97 Inch) - Ports: 22mm x1.50 - SETRAB - MSRP: $496.00

+ Rated for 300-400 HP Range | 29,000-40,000 BTU/Hr

+ Excellent for Porsche 911 / 930 models in the right front fender.
+ Use with Spal PN: 30103013 - 5.2" Paddle Blade Low Profile Fan / 12V Pusher

* SHOWN WITH 45 DEG. FITTINGS & 22mm TO AN-12 UNIONS THAT ARE SOLD SEPARATELY

Setrab
$435.00
Battery Carrier Mount for ODYSSEY PC 925

Battery Carrier Mount for ODYSSEY PC 925

Patrick Motorsports Exclusive
PMPPC925MNT
1.50 lbs

Battery Carrier Mount "UNIVERSAL" - Designed For ODYSSEY PC 925 Batteries - Black Power coated, Fabricated Steel - Includes Mounting Hardware Kit - PATRICK MS USA

WITH THIS MOUNT YOU CAN LOCATE THE BATTERY WHERE YOU NEED IT TO GET THE BEST WEIGHT DISTRIBUTION AND HOLD THE BATTERY SECURELY FOR ADDED SAFETY.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$110.00
911 - 930 Bilstein Shock Absorber Rear Sport

Shock Absorber - Sport - Rear Left / Right - Rear Axle Suspension Vibration Damper - (1972-1989) PORSCHE 911 / 930 Turbo - Yellow Body - BILSTEIN - LIST: $229.00

+ Replaces PN: B 46 975
+ Replaces PORSCHE PNs: 911 333 051 05 | 911 333 051 06 | 911 333 051 49

BILSTEIN
$200.00
Strut Insert Sport Front 911 930 Turbo Bilstein Shock

Strut Insert - Bilstein B8 Sport Street - Front Left / Right - Rebound 225 / Compression 112 - 36mm Monotube / Chrome Plated - PORSCHE 911 / 930 - BILSTEIN - MSRP: $227.05

+ Note: Only for Cars with Bilstein (GREEN) Struts.
+ Old Bilstein Part Number: F4RE35050H0

BILSTEIN
$208.00
Suspension Rear Control Arm Bushing - Rubber

Suspension Rear Control Arm Bushing - Rubber

SUS 901 331 059 00
0.26 lbs

Suspension Rear Control Arm Bushing - (1965-1989) PORSCHE 911 / 912 / 930 - Rubber Type - URO PARTS - MSRP: $44.34 + 4 Per Car

URO Parts
$30.00
911 / 930 TORSION BAR SET - (22MM) FRONT AXLE SUSPENSION

911 / 930 TORSION BAR SET - (22MM) FRONT AXLE SUSPENSION

SUS 901 343 100 22 SWA
3 In Stock
25.00 lbs

Torsion Bar Set - (22mm) Front Axle Suspension - (1965-1989) PORSCHE 911 / (1975-1989) PORSCHE 911 Turbo Carrera / 930 - Tubular Aircraft Alloy Steel / Heat Treated / Powder Coated - SWAY-A-WAY USA (Left / Right Set)

+ Replaces PNs:
901 343 101 12 / 901 343 102 12 - Torsion Bar Left / Right - (19mm)

SWAY-A-WAY
$385.00
911 / 930 Turbo - Suspension Stabilizer Bar Mount - Rear Left / Right

Suspension Stabilizer Bar Mount - Rear Left / Right - (1978-1989) PORSCHE 911 / 930 Turbo - Welded to Body - O.E. Supplier Germany - MSRP: $93.93 + 2 Per Car

Original Equipment Supplier
$90.00
Front Sway Bar System - 911 912 914 930

Anti-Sway Bar Stabilizer System - Front Axle Suspension - PORSCHE 912 / 914 / 911 / 930 - 22 MM Hollow Lightweight - 4130 Chromoly Heat Treated - TARRETT

+INCLUDES: ADJUSTABLE 6061-T6 ALUMINUM BEARING BLOCKS, DROP LINKS AND ARMS WITH ZINC PLATED STEEL HARDWARE

Application Note: (1974-1989) PORSCHE 911 / 930 MODELS ALSO USE: DROP LINK U-BRACKET & NUT PLATE ADAPTER SET

TARETT ENGINEERING
$475.00
Rear Sway Bar 912 911 930 - Tubular Hollow

Rear Sway Bar 912 911 930 - Tubular Hollow

SUS RSBA22L
1 In Stock
15.00 lbs

Rear Anti Sway Bar Set - PORSCHE 912 / 911 / 930 - 22mm Lightweight Tubular Hollow Bar - Fully adjustable complete with Aluminum Alloy bearing blocks, drop link set and hardware - TARETT ENGINEERING

+ When applying this set, we recommend updated sway bar mount busing brackets. See PN: 911 501 983 00

TARETT ENGINEERING
$558.00

Customer Testimonials

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!