914 4 - 2.2L (1973)

914 6 GT Front Oil Cooler Kit

914-6 GT Front Oil Cooler & Shroud Set
Includes: 1) PMP9146GTFOC - Front Oil Cooler - Dual Pass, 1) BOD9146OILKIT - Front Oil Cooler Shroud Kit, 1) BOD9146LVRPAN - Louvered Belly Pan
Use with:
+ PKG 9146GT FOC LK - Oil Thermostat & Line Set

Front Mount Oil Cooler 911 RS / 914-6 GT

Front Mount Oil Cooler - 911 RS / 914-6 GT Competition Dual Pass - 2x) AN-12 Feed / Return on same side - O.A.L. 21.50 Inches (546.10 mm) Cooling Area 17.75 x 4.25 x 1.90 Inch (450.85 mm x 107.95 mm x 48.26 mm) - Black Finnish - Includes mounting tabs - SETRAB / PATRICK MS USA EXCLUSIVE
+ Specially Designed Production - Manufactured by Setrab of Sweden

** WE USE THIS COOLER ON MANY OF OUR HIGH PERFORMANCE AND RACE 914 & 911 PROJECTS, THE SETRAB OIL COOLERS ARE ONE OF THE FINEST MADE, THEY ARE LIGHTWEIGHT AND THIS MEANS THEY COOL BETTER! THEY DISSIPATE OIL TEMPERATURE BETTER THAN MOST COMMON OIL COOLERS, AND WE ARE A FULL LINE SETRAB DISTRIBUTOR, THE AN-12 FITTINGS SHOWN ARE INCLUDED AND ARE NOT REMOVABLE. WE ARE ALSO A FULL LINE GOODRIDGE DISTRIBUTOR, ASK FOR THE PLUMBING HARDWARE FOR YOUR APPLICATION AND SEE IT IN USE ON MANY CARS IN THE "PROJECT" SECTION ON OUR SIGHT.
ADDING AN EXTRA OIL COOLER TO YOUR PORSCHE WILL INCREASE PROFORMANCE AND LENGTHEN THE SREVICE LIFE OF YOUR ENGINE. THIS IS A SMALL INVESTMENT FOR HUGH PIECE OF MIND. PLEASE CALL FOR QUOTES ON ALL OUR OTHER SYSTEMS.

914 6 - 901 Rear Side Gear Shift Rod Set

914-6 / 901 Rear Side Shift Rod Set - PATRICK MS USA
+ Includes: Gear Shift Rod, Universal Apex Joint, Bronze Side Shifter Bushing, Head Shift Rod End, Ball Cup Bushing & Hardware
+ Designed for H6 cylinder applications - Not for H4 cylinder engines

// THESE FACTORY SHIFT ROD HAS HAD 30+ YEARS OF SAND, SALT, AND WATER THE JOINT AND REAR BUSHING ARE PROBABLY WORN AND CAUSING YOU GRIEF SHIFTING AND POSSABLY DAMAGE TO YOUR TRANSMISSION. THIS IS AN EASY REPLACMENT. ALSO INSTALL THE PMP914FWSB SHIFT ROD BEARING AT THE SAME TIME AND GET A BETTER THAN NEW FEEL.

914 Transmisson Mount - Rear Solid

MOUNT SET - PORSCHE 914 SOLID REAR TRANSMISSION MOUNT SET - BILLET ALUMINUM AND DELRIN - UTILIZES ORIGINAL HARDWARE THESE ARE A GREAT ADDITION TO THE PMP9146FIWAMO WHEN YOU ARE DOING A CONVERSION, THIS COMBINATION WILL GIVE YOU MUCH BETTER ROAD FEEL AND MORE RESPONSIVE HANDLING
-PATRICK MOTORSPORTS EXCLUSIVE --

SPOILER - LOWER FRONT VALANCE - PORSCHE 914

SPOILER - LOWER FRONT VALANCE - PORSCHE 914 LIMITED EDITION TYPE - WITH OIL COOLER CUTOUT AND BRAKE DUCTS - FOR USE WITH NON GT FLARED CARS - COMPOSITE

REAR DECK LID - PORSCHE 914 GT

REAR DECK LID - PORSCHE 914 GT - LIGHTWEIGHT - 13.50 LBS - COMPOSITE GLASS

ROCKER - PORSCHE 914 STANDARD - FOR NON FLAIRED CARS

ROCKER - PORSCHE 914 STANDARD - FOR NON FLAIRED CARS

CLU 914 116 011 05

CLUTCH DISC - 215 MM - PORSCHE 912E '76' / 914 4 / 914 6 '70-71'- SACHS - 025 141 031 H - LIST: $333.35

Gasket Set - 901 Transmission

GASKET & SEAL SET - 901 MANUAL TRANSMISSION - PORSCHE 914 4 & 914 6 - ELRING - LIST: $82.83

914 Rear Control Arm Set

914 Rear Control Arm Set - Sport / Race - Modified with PMS Boxed Reinforcement Kit, Tie Down D-Loops & New PMS Delrin Bushing Set - Fully cleaned and reconditioned with polished pivot shaft bearings - Black Powder Coated and CAD plated bearing housing retainer plates. PATRICK MS USA

+ Price Includes: CORE Exchange Assembly PN: 914 331 RCA SET CORE = +$150.00
+ Also Recommend PN: PMP914RTOEKIT - 914 Adjustable Rear Toe Link Set
+ Also use 2 Qty. PN: 999 053 035 00 - Wheel Ball Bearing - 2 Row Type

DON’T TRUST YOU OLD STOCK FACTORY CONTROL ARM TO HANDLE THE ADDED HORSE POWER OF YOUR ENGINE CONVERSION. THEY WEAKEN, AND RUST OUT FROM THE INSIDE AS THEY TRAP MOISTURE WHEN THE DRAIN PASSAGES ARE PLUGGED WITH DIRT & DEBRIS.

* WE ALSO OFFER 5 BOLT/LUG REAR WHEEL HUBS PART # DRI 911 311 065 33 FOR YOUR WHEEL AND TIRE SWAP.

* THIS AUCTION IS FOR THE TRAILING ARM SET, PIVOT SHAFT SET & BEARING RETAINER SET ONLY, THIS PRICE IS BASED ON A USABLE CORE SET IN EXCHANGE, WITHOUT A CORE SET ADD 150.00 TO THIS PRICE.

Front Control Arm Set - 911 914 930

Front Control Arm Set - PORSCHE 911 / 914 / 930 Turbo Front Axle Suspension - Modified for early type through body anti sway bar - D Loop style mounts replaced with U tab style drop link connectors - Reconditioned set includes Left / Right control arms (911 Spline) complete with forward / aft bushing brackets - Black power coated finish. | PATRICK MS USA

Price Includes $200.00 CORE CHARGE, PN: CORE PMP 911 914 FCAKT - 911 Front Axle Control Arm Assembly Set
+ Include Complete Left & Right Set of: Control Arms & Bearing Retainer Brackets

Tech Tip:
IF YOU’RE LOOKING FOR MORE RESPONSIVE RIDE AND HANDLING USE THE DELRIN BUSHINGS ON ALL SUSPENSION MOUNTS. THE FACTORY RUBBER MOUNTS WILL SOFTEN WITH AGE AND THIS WILL CAUSE LOOSE AND UNRESPONSIVE HANDLING

+ Replacement Bushings available in precision machined Delrin or original style rubber.

PMP 914 531 900 00

914 DOOR HANDLE REPAIR KIT, BLACK PLASTIC.REPAIR THE WEAK LINK ON THE 914 OUTER DOOR
HANDELS WITHOUT REPLACING THE COMPLETE ASSEMBLY. SAVES YOU TIME AND MONEY. NO NEED TO HAVE THE HANDLES RE-KEYED TO MATCH YOUR IGNITION KEY AS THESE ARE NOT CHANGED (SOLD PER UNIT = 2 PER CAR)

--PATRICK MOTORSPORTS EXCLUSIVE--

914 Rear Adjustable Tow Rod Kit

REAR TOE ROD ADJUSTMENT KIT - PORSCHE 914 - INCLUDES ROD SYSTEMS WITH SPHERICAL BEARINGS, ADJUSTABLE HARDWARE, PRE-MODIFIED AND POWDER COATED CARRIER BRACKETS AND 2 STEEL WELD IN ROCKER MOUNTING PLATES.THE FACTORY REAR ADJUSTMENTS ARE VERY DIFFICULT AND TIME CONSUMING TO DO. THIS KIT MAKES THE TOE ADJUSTMENT VERY SIMPLE, WILL GIVE YOU BETTER CONTROL AND ADJUSTMENT FOR DIFFERENT APPPLICATIONS.


-PATRICK MOTORSPORTS EXCLUSIVE --

914 Trailing Arm Box Kit

TRAILING ARM BOX KIT - PORSCHE 914 - WELD ON TO REAR TRAILING ARMS FOR INCREASED STRENGTH – STEEL. YOU CAN INSTALL THIS KIT TO YOUR STOCK TRAILING ARMS TO ADD THE STRENGTH NEEDED FOR THE ADDED HORSE POWER OF TODAYS CONVERSIONS. THIS WOULD ALSO BE AN EXCELLENT TIME TO ADD THE PMP914RTOEKIT TOE ADJUSTMENT KIT.

PMP 914TLBUS

BUSHING - TRUNK LATCH / REAR COVER - PORSCHE 914 '70-'76 - CNC MACHINED DELRIN - 1 PER CAR - PATRICK MOTORSPORTS EXCLUSIVE.THIS BUSHING IS A GREAT REPLACMENT FOR THE STOCK METAL LOCK BUSHING AS IT WILL MOUNT THE LOCK MORE SOLID AND WILL NOT RUST AS THE METAL WILL .
-PATRICK MOTORSPORTS EXCLUSIVE --

914-6 GT Front Oil Cooler Shroud Air Duct Kit

Front Oil Cooler Shroud Kit - Porsche 914 / 914 6 GT - Fashioned from the original 914 6 GT front oil cooler air ducting system - Kit includes high quality reproduction upper and lower composite fiberglass air ducts.
Use With:
+ 1) PMP9146GTFOC - Oil Cooler
+ 1) BOD9146LVRPAN - Louvered pan
+ 1) BOD914GTFBWOC - Front Bumper Cover
+ 1) BOD914GTVAL - Front Lower Valance

914-6 Throttle Accelerator Cable

914-6 Throttle Accelerator Cable Set - Conversion Kit to PORSCHE 6 Cylinder (2.0L - 3.2L) Engines - Complete kit includes a heavy duty cable, new CAD plated mounting tab on transmission and ball socket end - PATRICK MS USA

+ Includes High Temperature Silicone Fire Sleeve
+ For 964 & 993 (3.6L) DME Engines, use PN: PMP914-964-993-TC - Accelerator Cable Conversion Kit 914 to 3.6L Engine

914 901 Side Gear Shift Bushing Kit

Gear Shift Rod Bushing - Billet Brass - (1973-1976) PORSCHE 914 with 901 side shifting transmission - Includes retaining clip - PATRICK MS USA
+ Replaces PN: 914 424 224 02 - Friction Ring / Shift Rod Bushing at Transmission
+ Due to wear, increase hole size on bracket to .850 Inch (21.59mm) I.D.

914 Clutch Cable - Heavy Duty

Clutch Cable FOR 914 - USED FOR 901 & 915 TRANSMISSIONS, * INCLUDES HIGH TEMP SILVER FIRE SLEEVE COVER TO KEEP THE CABLE FROM MELTING ! (NOT SHOWN) - PATRICK MS USA

* FOR BEST RESULTS USE OUR PMP 914CCP - HIGH STRENGTH DELRIN PULLEY WHEEL

* WHEN USING A 915 ALSO USE OUR PMP 914915CCB - 915 CLUTCH CABLE CLEVIS KIT

914 Chassis Reinforcement Kit

CHASSIS REINFORCEMENT KIT - PORSCHE 914 CHASSIS - PRE CUT 16 GAUGE STEEL STRENGTHENING KIT - 8 PIECE KIT - RECOMMENDED TIG OR HELIARC WELDING INSTALLATION.THE 914 CHASSIS WAS NOT DESIGNED FOR THE INCREASED HORESPOWER OF THE CONVERSIONS EVERYONE IS NOW DOING. ALSO IF YOU HAVE A CAR THAT HAS BEEN EXPOSED TO WINTER SALT YOUR CHASSIS IS IN NEED OF THIS UPGRADE TO HANDLE ALL THE DEMANDS THAT ARE PUT ON THE CAR.


- LIST: $169.00 -PATRICK MOTORSPORTS EXCLUSIVE-

914 Rear Coil Over Kit

Rear Coil Over System - Porsche 914 ’70-’76 – Sport / Race - Includes : 2) BILSTEIN rear sport height adjustable shocks, EIBACH 2.50 inch I.D. spring set (available in 25 lbs increments from 150 lbs to 400 lbs), upper spring hat set, 2) lower spring perch sets “fully adjustable” – For street use setup we recommend (175-225 lbs spring set) – For full racecar setup we recommend (275- 325 lbs spring set). The system allows infinite ride height adjustability and corner weight balance setup. Please view our project car gallery to see this system in action or call us today for further setup details.