SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

1973 911 to RS Right Hand Drive | 3.6L V-Ram | G50 SBH

projects / 1973 911 to rs right hand drive | 3.6l v-ram | g50 sbh

1973 911 to RS Right Hand Drive | 3.6L V-Ram | G50 SBH

1973 PORSCHE 911 RS Retro Creation - Right Hand Drive

See The 25 Parts We Use

01 1973-911-RS_FRONT-ISO-RIGHT 02 1973-911-RS_SIDE-RIGHT 03 1973-911-RS_REAR-ISO-RIGHT 06 1973-911-RS_REAR-ISO-DOOR-OPEN 05 1973-911-RS_RIGHT-DOOR-OPEN-RIGHT-HAND-DRIVE 04 1973-911-RS_RIGHT-DOOR-OPEN 07 1973-911-RS_INSTRUMENTS 10-911-RS_G50-01-GEAR-SHIFTER.jpg 13 1973-911-RS_CENTER-FILL-FUEL-CELL-TANK 08 1973-911-RS_ISO-REAR-DECK-LID 11 1973-911-RS_REAR-ISO-ENGINE-OPEN 06 1973-911-RS_REAR-UNDER-EXHAUST-SSI-PMS-MUFFLER 14 1973-911-RS_ENGINE-DETAIL 15 1973-911-RS_ENGINE-GEARBOX-DETAIL 16 1973-911-RS_36L-AIR-INJECTION

01 1973-911-RS_FRONT-ISO-RIGHT

02 1973-911-RS_SIDE-RIGHT

03 1973-911-RS_REAR-ISO-RIGHT

06 1973-911-RS_REAR-ISO-DOOR-OPEN

05 1973-911-RS_RIGHT-DOOR-OPEN-RIGHT-HAND-DRIVE

04 1973-911-RS_RIGHT-DOOR-OPEN

07 1973-911-RS_INSTRUMENTS

10-911-RS_G50-01-GEAR-SHIFTER.jpg

The Porsche G50-01 5 Speed transaxle gear shifter.

13 1973-911-RS_CENTER-FILL-FUEL-CELL-TANK

08 1973-911-RS_ISO-REAR-DECK-LID

11 1973-911-RS_REAR-ISO-ENGINE-OPEN

06 1973-911-RS_REAR-UNDER-EXHAUST-SSI-PMS-MUFFLER

14 1973-911-RS_ENGINE-DETAIL

15 1973-911-RS_ENGINE-GEARBOX-DETAIL

16 1973-911-RS_36L-AIR-INJECTION

1973 911 to RS Right Hand Drive | 3.6L V-Ram | G50 SBH Parts

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Patrick Motorsports Exclusive
24036DMEFW PMP
10 In Stock
9.00 lbs

Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm Clutch - 9 Bolt Crankshaft - (1978-1988) PORSCHE 930 Turbo 3.3L / 930 Trans & G50 SBH Trans - (60-2 Timing Configuration) - Billet Steel, Weight: 9.00 Lbs. (4.09 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing (Low Profile)
+ Includes: Rotational Balancing
+ Replaces PN: 930 102 202 01 - Flywheel (1978-1979) 930 Turbo
+ Replaces PN: 930 102 213 00 - Flywheel (1979-1988) 930 Turbo

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION
$550.00
Engine Oil Feed Pipe Adapter - 911 S Hose to 964 3.6L Engines

Engine Oil Feed Pipe Adapter - 911 S Hose to 964 3.6L Engines

Patrick Motorsports Exclusive
911 107 964 OP PMS
1 In Stock
1.00 lbs

964 Engine Oil Feed Pipe Adapter - (1970-1989) 911 / 930 Oil Tank S (Suction) Hose to (1990-1994) 964 3.6L Engine | Threads into case half right side (M24X1.50) - CNC Machined Stainless Steel - PATRICK MS USA
+ Includes M24 Aluminum Sealing Ring

+ Replaces PN: 964 207 257 11 - Oil Pipe
+ Connects to PNs: 911 107 233 00 / 930 107 233 02 - Oil Suction Hose

+ (1994-1998) 993 Applications use PN: OIL 911 107 993 OP PMS - 993 Engine Oil Feed Pipe Adapter

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSION
$145.00
911 / 930 Roll Bar Cage Harness Coupe Chassis Suspension

911 / 930 Roll Bar Cage Harness Coupe Chassis Suspension

Patrick Motorsports Exclusive
911 930 SARB PMP
10 In Stock
80.00 lbs

Roll Bar - 911 / 930 Coupe - 4 Point Weld In Stand Alone with Integral Harness Bar - Designed for all (1969-1989) 911 / 930 Turbo Coupe models (Not for Cabrio / Targa) - TIG Welded Construction with 1.75 x .120 Inch DOM Steel Tubing - PATRICK MS USA - CERTIFIED BATCH PRODUCTION

+ Designed for motorsport use only.
+ Conforms / Exceeds PCA / SCCA / FIA specifications.* Please check local racing regulations for updates before ordering.

PLEASE CONTACT US BY PHONE OR EMAIL TO PLACE AN ORDER

+ Freight Domestic: $190-250 Range - Please contact us for current estimates or international shipping rates.
+ Custom Satin black finish powder coat $100 Additional. Optional colors available - Please contact us for options.
+ Please see our 911 / 930 project gallery for installation images.

 PATRICK MOTORSPORTS USA
$700.00
911 - 930 Accelerator Throttle Cable Conversion Kit to 964 / 993 3.6L DME Engines

911 - 930 Accelerator Throttle Cable Conversion Kit to 964 / 993 3.6L DME Engines

Patrick Motorsports Exclusive
911 964 993 TC PMS
2 In Stock
0.50 lbs

911 / 930 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine - (1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines - PATRICK MS USA

+ Includes adjustable Delrin bulk head fitting
+ Includes installation instructions

Application:
(1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines

Designed to replace the original throttle cable assembly PNs:
PCG 423 024 00 – Throttle Linkage
901 423 223 01 – Extension Rod

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONGENUINE PORSCHE
$290.00
Starter Ring Gear - 911 Turbo Carrera 930 4 Spd / G50 SBH

Starter Ring Gear - 911 Turbo Carrera 930 4 Spd / G50 SBH

Patrick Motorsports Exclusive
930 116 230 00 PMP
1 In Stock
2.00 lbs

Starter Ring Gear - (1976-1977) PORSCHE 911 Turbo Carrera / 3.0L - Mounts on top of the 240mm Clutch Cover - OE Supplier Germany - MSRP: $261.52

+ Note: 3x Pressure plate limit pin clearance holes
+ Also used with PATRICK MS G50 Short Bell Housing Conversions

PMS G50 CONVERSION GENUINE
$245.00
911 Turbo Carrera - 930 Front Right Side Mount Oil Cooler Update Kit

911 Turbo Carrera - 930 Front Right Side Mount Oil Cooler Update Kit

Patrick Motorsports Exclusive
930 207 OC FRM
10.00 lbs

911 Turbo Carrera - 930 Front Right Side Mount Oil Cooler Update Kit - (1975-1989) PORSCHE 911 Turbo Carrera / 930 Wide Body Chassis - Updated OEM Cellular / Radiator Style Cooler Assembly with Original Metric 30mm Fittings.

+ Complete Parts Kit: Oil Cooler, mounting kit, oil line set, cover plate & sealing gasket.
+ Replaces PN: 930 207 050 03 - Oil Cooler (NLA)

+ Ideal for use on engine conversions, Turbo, sport and racing cars.

PMS 911 ENGINE CONVERSIONLAENGERER & REICHGENUINE PORSCHE
$985.00
911 - 914 - 930 Engine Crank Pulley - 993 (3.6L DME) Engine Conversion with Air Conditioner

Engine Crank Shaft Pulley for 993 (3.6L DME) Engine to 911 / 914 / 930 Chassis with Air Conditioner - Billet Aluminum Mil Spec Black Anodize - PATRICK MS USA

* Not to be used for '95-'98 993 3 belt pulley replacement *

+ For (1994-1998) 993 non-tapered end crankshafts only
+ Includes PN: 900 378 124 01 - Hex Head Bolt
+ Replaces PN: 993 102 050 01 & 993 102 050 41 - Crankshaft Pulley with Air Conditioner
+ Use with PN: 930 115 017 02 - Motor Console - (1984-1989) 911 Carrera

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$295.00
964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive

964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive

Patrick Motorsports Exclusive
993 106 051 80 PMS
10 In Stock
0.50 lbs

964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive - Converts To Single Belt Drive - Ideal for Sport / Motorsport / Engine Conversions - Updated Reproduction of the Original Porsche Motorsport / Euro RS Unit - CAD Designed Lightweight Optimized - 6061-T6 Billet Aluminum Alloy - Mil Spec. Black Anodized - (PMP36FANHUB) - PATRICK MS USA

+ Made for use with original or stud conversion hardware.
+ Replacement for PN: 964 106 051 30 - Original Fan Hub With Bearing
+ Reproduction of 911 Carrera RS Part Number: 993 106 051 80 – Wheel Hub for Engine Code: M64.20

 PATRICK MOTORSPORTS USA
$140.00
993 Engine Air Injection Secondary Smog Pump Port Plug Block Off Set (SAI)

993 Engine Air Injection Secondary Smog Pump Port Plug Block Off Set (SAI)

Patrick Motorsports Exclusive
993 113 200 AIB PMS
5 In Stock
0.30 lbs

993 Air Injection Port Plug Block Off Set - (1995-1998) PORSCHE 993 / Turbo 3.6L DME Engines - SAI (Secondary Air Injection) - Installed in top left / right side of camshaft housings - PATRICK MS USA

+ Includes specially designed billet screw plugs and seal ring sets.

Replaces PNs:
900 915 005 02 - Connection Piece
900 123 019 30 - Sealing Ring
993 113 275 01 - Air Tube Left
993 113 288 02 - Air Tube Right
993 624 103 00 / 993 624 103 01 - Air Injection Pump
993 113 250 03 - Check Valve
993 113 251 05 - Distributor Housing
+ All air injection ancillary parts.

The 993, 3.6L DME engines included a secondary air injection system to meet emission control standards. The components of this air injection system consisting of air tubes, distributor housing, check valve and air pump assembly. Working with the exhaust catalytic converter emission control system, it functions to reduce emissions on cold engine start up by injecting air into the engine camshaft housings flowing down through the exhaust ports. When installing and converting to the (1994-1998) 993, 3.6L DME engines to pre 1995 chassis, or race cars, the pump assembly can be removed saving weight and complexity.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$30.00
Ignition Coil Mount Adapter (Dual) - 993 Carrera 3.6L DME Engines

Ignition Coil Mount Adapter (Dual) - 993 Carrera 3.6L DME Engines

Patrick Motorsports Exclusive
993 602 CAM PMP
10 In Stock
2.00 lbs

Ignition Coil Mount Adapter (Dual) - (1994-1998) PORSCHE 993 Carrera 3.6L DME Engines to 911 / 930 / 914 Engine Conversions - Mounts to Left Side Fan Housing - Black Wrinkle Powdercoated - PATRICK MS USA

+ Use with PN: 993 602 071 01 - Ignition Coil Set (Dual)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$120.00
993 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - 964 Chassis

993 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - 964 Chassis

Patrick Motorsports Exclusive
993 612 173 DME PMS
5 In Stock
1.50 lbs

993 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 / 964 Chassis to (1995-1998) PORSCHE 993 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

OUR HARNESSES MAKE YOUR ENGINE SWAPS A PLUG AND PLAY OPERATION, NO DAMAGED COMPONENTS BY INCORRECT WIRING! ALSO RETAIN THAT FACTORY INSTALLED LOOK.

Interfaces PNs:
993 612 173 14 - Wiring Harness NR.173 - DME - (1994)
993 612 173 27 - Wiring Harness NR.173 - DME - (1995)
993 612 173 33 - Wiring Harness NR.173 - DME - (-1997)
993 612 173 35 - Wiring Harness NR.173 - DME - (1998)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONGENUINE PORSCHE
$395.00
1973 PORSCHE 911 RS Ducktail Rear Spoiler

1973 PORSCHE 911 RS Ducktail Rear Spoiler

BOD 911 73 RS DBS
50.00 lbs

1973 PORSCHE 911 RS Ducktail Rear Spoiler - FRP Composite - PATRICK MS USA

+ Application to: (-1989) 911 | Designed for early aluminum or late model black plastic ventilation grill. (Not Included)

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$895.00
Clutch Release Bearing G50 Standard

Clutch Release Bearing G50 Standard

CLU 950 116 080 08 SAC
1.34 lbs

Clutch Release Bearing - (1987-2012) PORSCHE 911 / GT3 / Turbo G50 Type Transmissions - 32mm I.D. - OEM SACHS (3151 173 202), MSRP: $229.25

+ Note: (1987-1993) 911 Use PN: 950 116 813 06 - Updated 32mm Guide Tube Thru-11/92)

Sachs
$195.00
911 Turbo Carrera 930 Clutch Set - Centerforce Clutch Kit - G50 SBH

911 Turbo Carrera 930 Clutch Set - Centerforce Clutch Kit - G50 SBH

Patrick Motorsports Exclusive
CLU DF255255
1 In Stock
15.00 lbs

Clutch Set - 240mm Sport Lightweight (1976-1977) PORSCHE 911 Turbo Carrera / 930 4-Speed Transmission "Short, Low Profile" - Matched High Clamp Load Aluminum Pressure Plate & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA

+ High Clamp Load | Torque Capacity rated at 580 ft/lbs. Light Pedal Effort
+ Also used with lightweight options for (1978-1988) 930 Turbo with adapter or with G50 Short Bell Housing Transaxle Conversions
+ Replaces PN: 930 116 021 00 - Clutch Pressure Plate
+ Replaces PN: 930 116 014 02 - Clutch Disc Spring Torsion Hub

PATRICK CLUTCHESPMS G50 CONVERSION Centerforce - The Performance ClutchSachs
$1,400.00
Exhaust Muffler Strap

Exhaust Muffler Strap

EXH 901 111 157 04
0.39 lbs

Exhaust Muffler Strap - (1965-1983) PORSCHE 911 - Includes Bolt - Stainless Steel - GENUINE - MSRP: $67.99

GENUINE
$68.00
SSI Exhaust Headers Heat Exchanger - 911 to (1989-1998) PORSCHE 3.6L DME Engine

SSI Exhaust Headers Heat Exchanger - 911 to (1989-1998) PORSCHE 3.6L DME Engine

Patrick Motorsports Exclusive
EXH 91 36 SSI
1 In Stock
38.00 lbs

SSI Exhaust Heat Exchanger Set - 911 to (1989-1998) PORSCHE 3.6L DME Engine - Special 21.5mm Thick Flat Flange - With O2 Sensor Socket - Primary Tubing: (1.50 O.D. / 35mm I.D.) - DANSK / SSI / PATRICK MS USA

+ Requires additional cam Tensioner clearance.
+ Use with PNs:
1) 911 107 739 10 - Oil Line
1) 911 107 729 10 - Oil Line
12) 999 062 239 02 - Exhaust studs

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONDanskSSI
$2,350.00
Sport Muffler Exhaust Silencer - 911RS - 914 6

Sport Muffler Exhaust Silencer - 911RS - 914 6

Patrick Motorsports Exclusive
EXHESM
23.00 lbs

Sport Exhaust Silencer Muffler - PORSCHE 911RS Style for early 911 and 914-6 (with dual bank heat exchangers / headers) - Features Dual (50mm) Inlets & Dual (57mm) Outlets - Tip Center to Center 340mm - Mild steel construction with OE type high temperature painted finish - DANSK / PATRICK MS USA

+ 911 & 914 applications require tip clearance on rear valance
+ Not for 914 models equipped with H6 / 915 Wevo tail shifter transaxles
+ Ceramic coating available in Luster Silver, Titanium Gray & Satin Black for additional: $250.00

*Weighs only 23 Lbs. (10.43 Kg.)
** SHOWN IN LUSTER SILVER CERAMIC COATING

 PATRICK MOTORSPORTS USADansk
$650.00
Fuel Tank Cell - PORSCHE 911 / 930 - Center Fill System

Fuel Tank Cell - PORSCHE 911 / 930 - Center Fill System | 17 Gallon (65 Liter) Pro Cell | Case container crafted with .063" Aluminum, TIG welded with satin black finish - Includes collector, non standard 6x10 inch remote center fill plate system & 3 inch filler port. | FUEL SAFE / PATRICK MS USA

+ Complete system includes: Fuel Cell & 3 Inch recessed remote hood center filler set

This system is specially designed to fill quickly through a larger 3 Inch remote center of hood (front cover) & recessed system. Ideal for vintage and racing cars.

 PATRICK MOTORSPORTS USAFuel Safe
$3,150.00
Union Adapter Fitting AN-12 Male To 30MM Female

Union Adapter Fitting (30mm Inverted Female to AN-12 Male) - Billet Aluminum - Hard Anodized - GOODRIDGE, MSRP: $41.69

Goodridge
$30.00
Heat Exchanger / Oil Cooler - 50 Row Pro Line STD 1 Series - Setrab

Heat Exchanger / Oil Cooler - 50 Row Pro Line STD 1 Series - (6.42 x 15.31 x 1.97 Inch) - Ports: 22mm x1.50 - SETRAB - MSRP: $496.00

+ Rated for 300-400 HP Range | 29,000-40,000 BTU/Hr

+ Excellent for Porsche 911 / 930 models in the right front fender.
+ Use with Spal PN: 30103013 - 5.2" Paddle Blade Low Profile Fan / 12V Pusher

* SHOWN WITH 45 DEG. FITTINGS & 22mm TO AN-12 UNIONS THAT ARE SOLD SEPARATELY

Setrab
$435.00
Heat Exchanger / Oil Cooler - 72 Row Pro Line STD 1 Series - Setrab

Heat Exchanger / Oil Cooler - 72 Row Pro Line STD 1 Series - (6.42 x 22.13 x 1.97 Inch) - Ports: 22mm x1.50 - SETRAB - MSRP: $674.00

Setrab
$570.00
911 / 930 TORSION BAR SET - (21MM) FRONT AXLE SUSPENSION

911 / 930 TORSION BAR SET - (21MM) FRONT AXLE SUSPENSION

SUS 901 343 100 21 SWA
3 In Stock
25.00 lbs

Torsion Bar Set - (21mm) Front Axle Suspension - (1965-1989) PORSCHE 911 / (1975-1989) PORSCHE 911 Turbo Carrera / 930 - Tubular Aircraft Alloy Steel / Heat Treated / Powder Coated - SWAY-A-WAY USA (Left / Right Set)

+ Replaces PNs:
901 343 101 12 / 901 343 102 12 - Torsion Bar Left / Right - (19mm)

SWAY-A-WAY
$385.00
911 / 930 Torsion Bar Set - (29mm) Rear Axle Suspension

911 / 930 Torsion Bar Set - (29mm) Rear Axle Suspension

SUS 911 333 100 29 SWA
2 In Stock
35.00 lbs

Torsion Bar Set - (29mm) Rear Axle Suspension - (1965-1986) PORSCHE 911 / (1975-1989) PORSCHE 911 Turbo Carrera / 930 - Tubular Aircraft Alloy Steel / Heat Treated / Powder Coated - SWAY-A-WAY USA (Left / Right Set)

+ Replaces PNs:
901 333 101 05 / 901 333 102 05 - Torsion Bar Left / Right - (23mm)
901 333 101 06 / 901 333 102 06 - Torsion Bar Left / Right - (22mm)
911 333 102 09 / 911 333 101 09 - Torsion Bar Left / Right - (24.1mm)
911 333 101 03 / 911 333 102 03 - Torsion Bar Left / Right - (26mm)

SWAY-A-WAY
$435.00
G50 SBH Short Bell Housing Transaxle Gearbox

G50 SBH Short Bell Housing Transaxle Gearbox

Patrick Motorsports Exclusive
TRA 950 G50 01 SBH
146.00 lbs

Complete G50 Short Bell Housing Transaxle Gearbox - For PORSCHE 911 / 930 Turbo - Blueprinted Rebuilds / Conversions

+ Please contact us for professional rebuild and conversion estimates.

 PATRICK MOTORSPORTS USAPMS G50 CONVERSION
$0.00
911 - G50 Short Shifter - Classic Style

911 - G50 Short Shifter - Classic Style

TRA WEVO G50 SHIFTER CL
1 In Stock
2.00 lbs

G50 Shifter - Classic Style - (1987-1989) PORSCHE 911 G50 Transmission & (1989) 930 Turbo / G50-50 Transmission - Precision Short Shifter with 30% reduction in shift lever travel - Features spring center and reverse blocked shifter mechanisms - For Street / Club / Racing Cars -STOCK BASE CASTING NOT INCLUDED--BOOT & KNOB NOT INCLUDED--WEVO - MSRP: $595.00

WEVO
$590.00

Customer Testimonials

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!