993 RSR EVO II "815" (1996)
 |
We started with a '96 993 coupe and completely converted it to full race RSR GT II configuration. We used all EVO II lightweight composite glass body work including the roof skin, and flush mount lightweight LEXAN windows. On the scales we are 2,360 lbs.. We spared no expense or detail on this car, Take a good look ! The engine is a 964 based 3.8L "RSR", utilizing all the tricks, "RSR" big valves & seats, Sprint cams, TWM manifold system, Hand made full race 1-7/8" stainless headers w-merge collector & rear cross over secondary merge exit. We are utilizing the very best in MOTEC with the M880 (mill spec.) ECU, ADL2 dash, with 16meg. of data logging. We are now setting the car up with inferred tire temperature sensors & suspension ride height/travel sensors. The engine makes 390+ HP on our DYNOJET XLC224 chassis dyno, and this RSR moves out quickly ! We have built two 993 6 spd transaxles, one has the RSR 8:32= 4.0 to 1 R&P with all short gears "sprint trans". Our second transaxle has the 9:31=3.44 F.D. w- short gears, both with our PMS billet side cover to reduce gear deflection & wear, along with all our tricks, and a super efficient SETRAB oil cooler, this system is "for life" ! We stripped the entire chassis bare, seam welded the tub & hand fabricated the complete roll cage safety system. The cage is FIA approved, the main hoop, "A" pillars & rear downward bars are built in 1.750" DOM .120" wall tubing, the rest in 1.50" DOM .095 wall. The front & rear chassis tubes are also 1.50" DOM .095". The car has on board air jack system"KRONTEC" that really make it nice to set up & service. We have just completed a diet program & went thru the car to replaced the floor pans and seat mount to get the driver as low as possible, it worked ! "See the race photo" We have just converted and reconfigured the dash & switch area, finished in red wrinkle powder coating, among the details. FUELSAFE cell of course, and just look at the photos, no detail spared !
We can help your project, call us 602-244-0911 |
                |
|
|
|
|
|
|
|
A composite roof was added in the second stage of weight reduction. We also completely cut out and re-paneled much of the chassis to reduce as much weight as possible. |
|
THE BRAKE PACKAGE WE CHOSE IS THE BREMBO 4 PISTON CALIPERS WITH SLOTTED ROTORS.
YOU CAN ALSO SEE THE COIL OVER FRONT SUSPENSION WITH EIBACH PREGRESSIVE TENDER AND MAIN SPRINGS AND THE FACTORY OIL COOLER. WE USE GOODRIDGE STAINLESS STEEL BRAIDED HOSES AND FITTINGS WITH ALL OUR OIL COOLER INSTALLATIONS AND UPGRADES. |
|
This picture shows the FUE SA 117 FUEL CELL which includes the 100 mm double dry brake system. When a fuel cell is wanted or required there is no finer choice than a fuel safe fuel cell. They are used and approved by all sanctioning bodies in every racing application from off road to Indy. If you are looking for a fuel cell, fuel safe should be your first and only choice! |
|
THIS SHOT SHOWS THE PETERSON OIL TANK - 16 QUART (4 GALLON) ALUMINUM (RACE) - DUAL BREATHER - 9 INCHES DIA. X 19 INCHES TALL PART NUMBER OIL 08-0011-DB - ALSO USE BILLET ALUM. BRACKETS OIL08-0101 - LIST: $467.30
BELOW THAT IS THE TILTON OIL / WATER PUMP - USED ON TRANSAXLE COOLER SYSTEMS - LIGHTWEIGHT - 3/8" NPT INLET / OUTLET - 12 VOLT - BUNA - INCLUDES BYPASS - 60 PSI WORKING PRESSURE - 1-2 GPM FLOW RATE PART NUMBER ELE TIL 40-524 TOE STEERING LINK - REAR - PORSCHE 993 '95-98'- ADJUSTABLE - 2 PER CAR - HIGH QUALITY SELF LUBRICATED BEARINGS AND BILLET ALUMINUM / STAINLESS STEEL HARDWARE SUS 993 005 KINEMATICS LINK - REAR - PORSCHE 993 - ADJUSTABLE - 2 PER CAR - HIGH QUALITY SELF LUBRICATED BEARINGS AND BILLET ALUMINUM / STAINLESS STEEL HARDWARE SUS 993 004 |
|
THIS SHOT SHOWS THE PETERSON OIL TANK - 16 QUART (4 GALLON) ALUMINUM (RACE) - DUAL BREATHER - 9 INCHES DIA. X 19 INCHES TALL PART NUMBER OIL 08-0011-DB - ALSO USE BILLET ALUM. BRACKETS OIL08-0101 - LIST: $467.30
YOU CAN ALSO SEE OUT TRANSMISSION COOLER SYSTEM CONNECTED TO THE TOP OF THE TRANSMISSION AND THE COOLER ON THE LEFT UNDER THE BLACK DUCT WORK. NEXT TO THAT IS THE MOCAL 180 DEGREE OIL THERMOSTAT PART NUMBER OIL-12THER ALL PLUMBED WITH GOODRIDGE FITTINGS AND STAINLESS STEEL HOSES. |
|
THIS SHOT SHOWS THE TRANSMISSION REBUILD IN PROGRESS. YOU CAN ALSO SEE THE RETURN FITTING FOR THE TRANSMISSION COOLER SYSTEM WE ARE INSTALLING. WE USE ONLY THE FINEST COMPONENTS IN OUR UPGRADES. INCLUDING THE TILTON OIL PUMP TO CIRCULATE THE TRANS FLUID THROUGH THE SETRAB COIL COOLER. ALL FITTINGS AND HOSE ARE GOODRIDGE.
THIS ALSO SHOWS OUR BILETT SIDE COVER WHICH IS A MUST FOR THE HIGHER HORSE POWER APPLICATIONS TO ADD NEEDED STRENGTH TO THE DIFFERENCIAL CASE. |
|
|
Patrick Motorsports is an Authorized MoTeC Distributor. We specialize in: Complete Systems Solutions - Engine Management - Data Logging - Full Product Support. Please contact MoTeC Porsche Systems Specialist, Steve Starrick for a system consultation. |
|
|
559 |
|
Leading the pack. |
|
993 RSR EVO II "815" (1996) Parts
Oil Breather Catch Tank Set for Engine Crankcase & Transmission Ventilation
Oil Breather Catch Tank Set for Engine Crankcase & Transmission Ventilation+ Set Includes: Breather Catch Tank with Internal Baffles, Insulated Mounting Hardware, AN Adapter Fittings, Original Type Cloth Braided Hose with Hardware.
+ Ideal for engine and transaxle conversions and racing applications.
+ Tank equipped with dual breather ports for both engine and or transmission ventilation.
Item: PKG 911 914 OBS
Price: $278.00
Engine Oil Case Union Adapter - Inlet AN-16
Oil Inlet Case Union Adapter Kit - AN-16 to All 911 Engines - Billet Aluminum - PATRICK MS USA+ Includes new studs, hardware and seals.
Item: PMP 131-004
Price: $118.00
Camshaft Cover Block Off Plate 964 - 993
CAMSHAFT BLOCK OFF PLATE - PORSCHE 3.6L '90-'98 ENGINES - CONVERSION OR POWER STEERING DELETE - LOW PROFILE FOR ADDITIONAL CLEARANCE - PATRICK MS USA EXCLUSIVE+ Replaces PN: 993 105 117 02 - Cover
+ Includes: 993 707 293 40 - O-Ring
Item: PMP36CAMBLOCK
Price: $78.00
964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive
964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive - Converts To Single Belt Drive - Ideal for Sport / Motorsport / Engine Conversions - Updated Reproduction of the Original Porsche Motorsport / Euro RS Unit - CAD Designed Lightweight Optimized - 6061-T6 Billet Aluminum Alloy - Mil Spec. Black Anodized - PATRICK MS USA+ Made for use with original or stud conversion hardware.
+ Replacement for PN: 964 106 051 30 - Original Fan Hub With Bearing
+ Reproduction of 911 Carrera RS Part Number: 993 106 051 80 – Wheel Hub for Engine Code: M64.20
Application Notes:
Fitment to all (1990-1998) 964 - 993 / Turbo 3.6L / 3.8L / RS / RSR Engines
This unit updates the original bearing hub and dual belt assembly to a simpler, single belt system. The united hub under-drives the alternator, reducing drag and allows the engine’s air cooling impeller to operate at the same speed for increased engine efficiency. Ideal use for performance engines running higher RPM ranges. The original equipment fan hub features a wearable bearing allowing the alternator and fan operate at independent speeds. The increased alternator speed is intended to produce additional current for electronic accessories. Higher alternator output may assist street models with additional electronic accessories. Recommended for high performance street, or motorsport use.
Item: PMP36FAN-HUB
Price: $140.00
BOD LIDPINKIT
DECK LID PIN KIT - HOLD DOWN SET INCLUDES SPECIALLY MACHINED DELRIN STRIKER DISCS, ALUMINUM PINS, AND LOCKING CLIPS - LIGHTWEIGHT - PATRICK MS EXCLUSIVE
Item: BOD LIDPINKIT
Price: $48.00
BRA 964 606 904 00
PRESSURE SWITCH - HYDRAULIC BRAKE BOOSTER PUMP - PORSCHE 911 TURBO '91-'97 / 911 CARRERA 4 '90-'98 / 993 RSR / CARRERA GT '04-'05 / 928 - GREEN 5 PIN TYPE - INCLUDES O-RING SEAL - GENUINE - LIST: $307.50
Item: BRA 964 606 904 00
Price: $355.21
ELE M880
COMPLETE MOTEC SYSTEM SOLUTIONS FOR PORSCHE MOTORSPORT APPLICATION - PLEASE CONTACT US FOR SYSTEM EVALUATION - THE APPLICATIONS GUIDE IS AVAILABLE FOR DOWNLOAD IN THE CATALOGS SECTION ON OUR WEBSITE
Item: ELE M880
Price: $0.00
ELE RCX11862
MASTER DISCONNECT SWITCH - POWER - 6 POLE TYPE WITH ALTERNATOR - (FIA APPROVED) *Required for race carsALSO USED ON OUR BOXSTER SPEC RACING (BSR) CARS
Item: ELE RCX11862
Price: $48.00
ELE TIL 40-524
TILTON OIL / WATER PUMP - USED ON TRANSAXLE COOLER SYSTEMS - LIGHTWEIGHT - 3/8" NPT INLET / OUTLET - 12 VOLT - BUNA - INCLUDES BYPASS - 60 PSI WORKING PRESSURE - 1-2 GPM FLOW RATE
Item: ELE TIL 40-524
Price: $192.50
Solid Rocker Arm Conversion Set 993
993 Rocker Arm Conversion (Retro-fit Kit to Convert from Hydraulic to Manual Valve Adjustment) - Application to all (1995-1998) 911 / Turbo Models - GENUINE PORSCHE+ Contains: Rocker Arms, Rocker Shafts, Adjusting Screws. Nuts, Gaskets.
+ Use with PN: 911 099 103 52 - RSR Rocker Shaft Seal O-Ring
** THESE ARE A MUST FOR ALL HIGH PERFORMANCE 993 ENGINE APPLICATIONS. THE O.E. HYRAULIC ROCKER TIPS LOOSE POWER OVER 6500 RPM'S DUE TO FLOATING AND WON'T OPEN THE VALVE TO THE MAX CAM LIFT. THESE ARE A MUST FOR ANY CAMSHAFT UPGRADE! THESE WILL ALSO MAKE MORE POWER WITH STOCK CAMS OVER THE UPPER RPM!
Item: ENG 993 105 043 99
Price: $1787.50
ENG PS 102 001
PISTON & CYLINDER SET - FOR RSR CONNECTING ROD - 22.60 MM PISTON BOSS SPACING - YEILDS 3.8 LITER - 12.5:1 COMPRESSION RATIO - MACHINE OPERATION ON CASE TO BORE I.D. 109.00 MM - 6 QTY. PACK - MAHLE MOTORSPORT - LIST: $6240.00
Item: ENG PS 102 001
Price: $5820.00
FIL 09JC40
BASEPLATE - BLANK FOR ITG MEGAFLOW AIR FILTER JC40 - 3 CLIP TYPE - ALUMINUM - 2 PER CAR - ALSO USE 3 QTY: FILBASEPLATCLIP
Item: FIL 09JC40
Price: $38.00
Air Filter ITG JC40
FILTER - ENGINE AIR - ITG MEGAFLOW JC40-100 - FOAM TYPE - 2 PER CAR PORSCHE 6-BUTTERFLY - REQUIRES MOUNTING BASE PLATE
Item: FIL JC40-100
Price: $138.00
964 993 Fuel Cell 27 Gallon
FUEL CELL - PORSCHE 911 '90-'98 - PRO CELL - 27 GALLON (100 LTR.) - .063" ALUMINUM - TIG WELDED CONTAINER - LOW FUEL LEVEL WARNING LIGHT INDICATOR - COLLECTOR - FUEL SAFE - LIST: $2986.16
Item: FUE SA103
Price: $2798.00
AN-12 Hose End - Straight
HOSE END - AN-12 STRAIGHT MAX FLOW SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-0112
Price: $24.00
AN-16 Hose End - Straight
HOSE END - AN-16 STRAIGHT MAX FLOW SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-0116
Price: $21.00
AN-12 Hose End - 120 Degree
HOSE END - AN-12 TO 120 DEGREE SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-12012
Price: $28.00
AN-12 Hose End - 180 Degree
HOSE END - AN-12 TO 180 DEGREE SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-18012
Price: $29.00
AN-16 Hose End - 180 Degree
HOSE END - AN-16 TO 180 DEGREE SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-18016
Price: $36.00
AN-12 Hose End - 45 Degree
HOSE END - AN-12 TO 45 DEGREE SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-4512
Price: $26.00
AN-16 Hose End - 45 Degree
HOSE END - AN-16 TO 45 DEGREE SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-4516
Price: $34.00
AN-12 Hose End - 90 Degree
HOSE END - AN-12 TO 90 DEGREE SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-9012
Price: $28.00
AN-16 Hose End - 90 Degree
HOSE END - AN-16 TO 90 DEGREE SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-9016
Price: $34.00
Adapter Fitting AN-12 Male To 30MM Female
Union Adapter Fitting (30mm Inverted Female to AN-12 Male) - Billet Aluminum - Hard Anodized - GOODRIDGE, MSRP: $41.69
Item: HAR 730-12DFEM
Price: $30.00
Adapter Fitting AN-16 Male To 30MM Female
Union Adapter Fitting (30mm Inverted Female to AN-12 Male) - Billet Aluminum - Hard Anodized - GOODRIDGE, MSRP: $41.69
Item: HAR 730-16DFEM
Price: $32.00
OIL 08-0011-DB
OIL TANK - 16 QUART (4 GALLON) ALUMINUM - DUAL BREATHER -12AN - 9 INCHE DIA. X 19 INCHES TALL - AN-12 FEMALE INLET & -16AN FEED AT BOTTOMUSE MOUNT BRACKET KIT08-0101
Item: OIL 08-0011-DB
Price: $527.95
OIL 08-0101
OIL TANK STRAP KIT - BILLET ALUMINUM - FOR 4 GALLON OIL TANK 9 INCH DIA. - PETERSON *SHOWN ON TANK - TANK NOT INCLUDED
Item: OIL 08-0101
Price: $83.00
Oil Breather Catch Tank - 4.65 Inch (118mm) O.D.
Oil Breather Catch Tank - 4.65 Inch (118mm) O.D. - Lightweight Spun Aluminum with Internal Baffling - 2) AN-12 Female Ports & AN-06 Drain Plug - PETERSON FLUID SYSTEMS+ Includes: Insulated Stainless Steel Mounting Strap
Item: OIL 08-0400
Price: $180.00
1.50 LBs
OIL 08-0410
BREATHER/FLUID CATCH TANK - ALUMINUM 3 INCH DIAMETER - INTERNALLY BAFFLED - 1X AN-12 MALE & AN-8 MALE PORTS - BOTTOM QUICK DRAIN PETCOCK VALVE - INCLUDES INSULATED STAINLESS STEEL CLAMP
Item: OIL 08-0410
Price: $169.75
In Line Filter Oil-Fuel AN-08
SCAVENGE FILTER - AN-08 INLINE BILLET ALUMINUM FILTER, WE USE THIS ON ALL OUR TRANSMISSIONS COOLING SYSTEMS, IT KEEPS METAL FRAGMENTS FROM RUNNING THROUGH THE OIL PUMP, COOLER AND BACK INTO THE GEARS, OUCH ! YES, THIS IS A KEY INGREDIENT TO YOUR TRANSMISSIONS LONG LIFE - PETERSON FLUID SYSTEMS
Item: OIL 09-0401
Price: $54.00
Inline Filter - Oil / Fuel - AN-12
INLINE FILTER - OIL OR FUEL - STAINLESS STEEL FILTER ELEMENT RATED AT 60 MICRON OR .0023 INCH CAPTURE PARTICLE SIZE - AN-12 IN & OUT - BILLET ALUMINUM HOUSING - RED ANODIZED - PETERSON - LIST: $183.34
Item: OIL 09-0452
Price: $173.00
OIL 16THER
THERMOSTAT - OIL - AN-16 MALE - 180 DEGREE OPERATION - MOCAL OT2 TYPE
Item: OIL 16THER
Price: $165.00
OIL N 020 290 1
BREATHER HOSE - 12 X 19 MM - CLOTH COVERED - PER METER - PORSCHE 912E / 914 4 - GENUINE - LIST: $22.82
Item: OIL N 020 290 1
Price: $20.50
OIL SET50-119-7612
SETRAB OIL COOLER, SIZE 8.25" X 5.75" X 2.0", 22mm x1.5, LIST $ 186.00 *** GREAT TRANS COOLER!(FITTINGS PICTURED ARE EXTRA)
THIS IS THE COOLER FEATURED IN OUR EXCLUSIVE TRANSMISSION COOLER PACKAGE:
http://www.patrickmotorsports.com/part/1690/
Item: OIL SET 50-119-7612
Price: $163.00
Engine Crankshaft Pulley for 964 (3.6L DME) Engine to 911 / 930 / 914 Chassis with Air Conditioner
Engine Crankshaft Pulley for 964 (3.6L DME) Engine to 911 / 930 / 914 Chassis with Air Conditioner - Billet Aluminum Mil Spec Black Anodize - PATRICK MS USA+ For (1990-1994) 964 tapered end crankshafts only - Designed for 964 RS RSR & GT-2 tapered crankshafts in 911 & 914 cars
+ Includes PN: 900 378 124 01 - Hex Head Bolt
+ Replaces PN: 964 102 050 01 - Crankshaft Pulley with Air Conditioner M64.01/02/03
+ Use with PN: 930 115 017 02 - Motor Console - (1984-1989) 911 Carrera
Item: PKG 964 36 CP AC
Price: $298.00
993 RS / GT2 / EVO Lightweight Wheel Carrier / Hub & T-Rod Package
993 RS / GT2 / EVO Front Axle Suspension Conversion - Lightweight Wheel Carrier / Hub & T-Rod Package - (1994-1998) PORSCHE 993 Carrera RS / GT2 / Race Cars (16.80 Lbs.)+ Includes New GENUINE PORSCHE MOTORSPORT Parts: Left / Right Wheel Carrier Front Hub / Steering Knuckle (Lightweight Upright) Set & Steering Tie Rod Assembly - Front Left / Right - 993 Carrera RS / GT2 (Race Cars)
+ Note: PN: 993 347 031 80 - Steering Tie Rod GT2 has be Superseded & is no longer available.
Item: PKG 993 340 RS WC
Price: $1698.00
16.86 LBs
Remote Oil Filter Console Mount Set - AN-12
Remote Oil Filter & Console Mount Set - Includes modular mounting bracket, fittings & filter kit - Billet Aluminum, Black Finish - SETRAB / WIX RACING / PATRICK MS USA+ Includes 2) PN: 22-ORB10AN12-00 - Adapter fitting - AN-10 ORB female to AN-12 Male
+ Includes 1) PN: 51060R - WIX Racing Filter
Item: PKG OIL FCS
Price: $140.00
Mount Set Solid
MOUNT SET - ENGINE / TRANSMISSION - SPORT / RACE - PORSCHE 911 / TURBO '91-'05 / GT2 / BOXSTER '97-'05 / CAYMAN - SOLID TYPE - BILLET ALUMINUM - ANODIZED - 1 SET PER CAR.THIS MOUNT SET WILL GIVE YOU RESPONSIVE HANDLING AND BETTER TRACK FEEL THAN THE STOCK RUBBER MOUNTS
*RECOMMENDED FOR RACING USE- ALSO USED ON OUR BOXSTER SPEC RACING (BSR) CARS
-PATRICK MOTORSPORTS EXCLUSIVE --
Item: PMP 993 375 101 80
Price: $368.00
PMP G-50 3RD 1.68
CLOSE RATIO 1.68 GEAR SET.SET YOUR GEAR BOX UP FOR THE TRACKS YOU RUN THE MOST AND PUT THE MOST POWER TO THE TRACK WHERE YOU NEED IT.
CALL FOR A COMPLETE QUOTE ON ALL OUR GEAR BOX AND DIFFERENTAL UPDATE CHOICES
Item: PMP G-50 3RD 1.68
Price: $895.00
PMP G-50 4TH 1.33
CLOSE RATIO 1.33 GEAR SETSET YOUR GEAR BOX UP FOR THE TRACKS YOU RUN THE MOST AND PUT THE MOST POWER TO THE TRACK WHERE YOU NEED IT.
CALL FOR A COMPLETE QUOTE ON ALL OUR GEAR BOX AND DIFFERENTAL UPDATE CHOICES
Item: PMP G-50 4TH 1.33
Price: $895.00
PMP G-50 5TH .923
5th GEAR SET .923SET YOUR GEAR BOX UP FOR THE TRACKS YOU RUN THE MOST AND PUT THE MOST POWER TO THE TRACK WHERE YOU NEED IT.
CALL FOR A COMPLETE QUOTE ON ALL OUR GEAR BOX AND DIFFERENTAL UPDATE CHOICES
Item: PMP G-50 5TH .923
Price: $895.00
PMP G-50 5TH .96
CLOSE RATIO .96 GEAR SETSET YOUR GEAR BOX UP FOR THE TRACKS YOU RUN THE MOST AND PUT THE MOST POWER TO THE TRACK WHERE YOU NEED IT.
CALL FOR A COMPLETE QUOTE ON ALL OUR GEAR BOX AND DIFFERENTAL UPDATE CHOICES
Item: PMP G-50 5TH .96
Price: $895.00
993 Air Injection Plug Block Off Set
993 Air Injection Port Plug Block Off Set - (1995-1998) PORSCHE 993 / Turbo 3.6L DME Engines - Installed in top left / right side of camshaft housings - PATRICK MS USA+ Includes specially designed billet screw plugs and seal ring sets.
The 993, 3.6L DME engines included a secondary air injection system consisting of an air pump assembly working with the catalytic converter system functioning to reduce emissions on engine start up. When installing and converting to the 993, 3.6L DME engines to older model cars, the pump assembly can be removed saving weight and complexity.
PLEASD DO NOT TRY USING GENERIC PLUGS INTO YOUR ALUMINUM CAM HOUSINGS FROM THE HARDWARE STORE YOU WILL JUST MAKE PROBLEMS WE DO NOT NEED.
Item: PMP36AIPP
Price: $18.00
0.30 LBs
Transmission Mount G50 Nose Cone Delrin
TRANSMISSION NOSE MOUNT SET - SOLID TYPE FOR '90-'94 G50 5 SPD. & '95-'98 G-50/21 6 SPD. TRANSMISSIONS - PORSCHE 911 CARRERA 2 '90-'94, 993 CARRERA '95-'98 - MACHINED DELRIN WITH ALUMINUM BUSHINGS.THESE MOUNTS WILL GIVE YOU MORE RESPONSIVE HANDLING AND MUCH BETTER ROAD FEEL.
THEY ALSO WILL NOT SETTLE OR COME APPART LIKE THE RUBBER ONES DO.
*RECOMMENDED FOR RACING USE
-PATRICK MOTORSPORTS EXCLUSIVE --
Item: PMPSTMG50NOSE
Price: $168.00
SAF LT10AAA
FIRE SYSTEM - 10 LBS. ALUMINUM FIRE BOTTLE - HALON 1301 - PULL CABLE KIT & 3 NOZZLES WITH ALUMINUM TUBING KIT - DOT APPROVED - MEETS SCCA / NASA REQUIREMENTS - NON SFI CERTIFIED - SAFECRAFT
Item: SAF LT10AAA
Price: $588.00
Momo Steering Wheel Hub Adapter
MOMO STEERING WHEEL ADAPTER HUB FOR PORSCHE BOXSTER 97-04, 944 ALL 85-89, 968 90-94, 911 90-04
Item: SUS 7004MOMO
Price: $85.00
Kinematic Link Rear Suspension 993
KINEMATICS LINK - REAR - PORSCHE 993 - ADJUSTABLE - 2 PER CAR - HIGH QUALITY SELF LUBRICATED BEARINGS AND BILLET ALUMINUM / STAINLESS STEEL HARDWARE
Item: SUS 993 004
Price: $268.00
Toe Steering Link Rear Suspension 993
TOE STEERING LINK - REAR - PORSCHE 993 '95-98'- ADJUSTABLE - 2 PER CAR - HIGH QUALITY SELF LUBRICATED BEARINGS AND BILLET ALUMINUM / STAINLESS STEEL HARDWARE
Item: SUS 993 005
Price: $288.00
993 Shock Mount Kit
Monoball Rear Shock Mount Kit - Supporting mount assembly - CNC machined billet aluminum, hard anodized - Includes shock mounting hardware.+ Application to All 993 Models with motorsport threaded body dampers
Item: SUS 993 333 004 K1
Price: $488.00
Front Control Arm Bushing / Monoball Bearing Cartrige Set 964 993
Front Control Arm Monoball Bearing Cartridge Set - CNC machined billet aluminum, clear anodized. Includes high integrity self lubricating uniball bearings. Complete 4 piece set for Left & Right lower control arms. Direct replacement for worn, rubber bushings.+ Application to all PORSCHE 964 / 993
Item: SUS 993 341 017 K1
Price: $935.00
993 Camber Plate Kit
Monoball Front Strut Mount Kit - Supporting mount assembly with adjustable camber plate, CNC machined billet aluminum, hard anodized - Includes strut mounting hardware.+ Application to All 993 Models with motorsport threaded body dampers
Item: SUS 993 343 002 K1
Price: $598.00
SUS 993 RSSWBARKIT
993 RS/GT2 ANTI-SWAY BAR SYSTEM - FRONT/REAR - ADJUSTABLE - REQUIRES MS THREADED BODY SHOCKS
Item: SUS 993 RSSWBARKIT
Price: $1685.00
Eibach Springs
Eibach Springs - We inventory a wide variety of Eibach products. Main rate springs and progressive tender springs are available in 2.25 and 2.50 inch I.D. in a wide variety of lengths and rates. We also machine and inventory a wide variety of spring hardware for Porsche Coil Over Systems. Please contact us for packages and set up options.
Item: SUS EIBACH SPRINGS
Price: $0.00
Bilstein PSS10 Suspension Kit 993
BILSTEIN PSS10 Suspension System - THE NEW IMPROVED FRONT AND REAR COIL OVER TYPE SUSPENSION PACKAGE FOR PORSCHE 993 - MSRP: $4064.04Front and rear coil over shocks with springs. Ride height adjustable. 10 precise compression and rebound settings, from comfort to competition. Other PN: 48-132688
Item: SUS GM5 D268 HO
Price: $3148.00
