SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

Porsche 911r 100l Fuel Tank & Fuel Level Sender

PORSCHE 911R 100L FUEL TANK & FUEL LEVEL SENDER
PART # FUE901.201.010.31SET
25.00 LBs
$1860.00

Patrick Motorsports Exclusive

PORSCHE 911R 100L FUEL TANK: DANSK
INCLUES CUSTOM 100L TANK SENDER
The 100-litre steel tanks for Porsche 911 were originally available as either side- or centr-fill. Side fill using the standard wing-mounted petrol filler flap was normally used on road cars, but was also seen on a number of ST rally models. Centrfill was more common on racing cars, including the 911R.
CENTER FILL NECK COULD BE ADDED. (NOT INCLUDED)

INCLUDES PART NUMBER 901.201.010.31 TANK AND 901.741.801.00 SENDER

SENDER INCLUDED (NOT PICTURED) VERY DIFFICULT TO FIND

Dansk

Cars That Fit

911 1964-1969 2.0L H6 NA
1970-1971 2.2L H6 NA
1972-1973 2.4L H6 NA

Related Parts

3.6L Engine Displacement Badge

3.6L Engine Displacement Badge

Patrick Motorsports Exclusive
36L BADGE PMP
22 In Stock

** SUMMER SPECIAL! Was $48.00, you save $9.00 **
Discount for a limited time only.

Engine Displacement Badge Logo Decorative Fitting - (3.6) - Billet Aluminum with black powder coat finish - PATRICK MS USA

+ Includes studs mounting hardware for rear deck lid ventilation grill cover or for cockpit interior installation.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$39.00
Engine Support Cross Member Mount - 911 - 930

Engine Support Cross Member Mount - 911 - 930

ENG 930 375 011 01
3.20 lbs

Engine Support Cross Member Mount - (1965-1989) PORSCHE 911 / 930 Turbo / Coupe / Targa - GENUINE PORSCHE - MSRP: $154.84

GENUINE PORSCHE
$155.00
PMO Carburetor Package (40mm) - ( -1998) PORSCHE 911 / 914-6

PMO Carburetor Package (40mm) - ( -1998) PORSCHE 911 / 914-6 - PMO - (Please fill out setup sheet when ordering)

Complete with Installation Kit:
+ Ported Manifold Set
+ Insulator Flange Set
+ Crossbar Linkage Set
+ Air Cleaner & Watershied Set
+ Oil Tank Breather
+ Power Brake Check Valve
+ Injector Plug Set
+ Fuel Filter, Line, Hardware
+ Fuel Pressure Control Unit

PMO
$4,395.00
PMO Carburetor Package (46mm) - ( -1998) PORSCHE 911 / 914-6

PMO Carburetor Package (46mm) - ( -1998) PORSCHE 911 / 914-6 - PMO -
(Please fill out setup sheet when ordering)

Complete with Installation Kit:
+ Ported Manifold Set
+ Insulator Flange Set
+ Crossbar Linkage Set
+ Air Cleaner & Watershied Set
+ Oil Tank Breather
+ Power Brake Check Valve
+ Injector Plug Set
+ Fuel Filter, Line, Hardware
+ Fuel Pressure Control Unit

PMO
$4,495.00
Suspension Isolation Mount - 6mm Rubber Buffer

Suspension Isolation Mount - 6mm Rubber Buffer

HAR 617 988 01 11 MEI
10 In Stock
0.06 lbs

Rubber Isolator - Round - M6 Dual Stud / 17mm Stud Length - VAG - MEISTERSATZ - MSRP: $18.50

GENUINE
$3.50
Aeroduct Hot Air Heater Hose - 2.50 Inch (63.50mm) I.D.

Aeroduct Hose - 2.50 Inch (63.50mm) I.D. Single Ply Black Neoprene | 1 Unit = Per Foot

+ Typically used for engine to heat exchanger hot air, brake ducting and oil cooler air feed.

 PATRICK MOTORSPORTS USA
$9.00
Fire Sleeve | .50 Inch (12.70 mm) O.D. - Use with AN-08 Hose - Black Silicone over knitted fiberglass

Fire Sleeve | .50 Inch (12.70 mm) O.D. - Use with AN-08 Hose - Black Silicone over knitted fiberglass - Per Foot (12 Inch) Unit - Made In USA

FIRE SLEEVE
$4.75
Fire Sleeve - AN-08 / AN-10 / AN-12 (Stretch Over) / .75 Inch (19.05 mm) O.D. Hose - Black Silicone over knitted fiberglass

Fire Sleeve - AN-08 / AN-10 / AN-12 (Stretch Over) / .75 Inch (19.05 mm) O.D. Hose - Black Silicone over knitted fiberglass - Per Foot (12 Inch) Unit - Made In USA

FIRE SLEEVE
$5.25
Fire Sleeve - AN-16 / 1.00 Inch (25.4 mm) O.D. Hose - Black Silicone over knitted fiberglass

Fire Sleeve - AN-16 / 1.00 Inch (25.4 mm) O.D. Hose - Black Silicone over knitted fiberglass - Per Foot (12 Inch) Unit - Made In USA

FIRE SLEEVE
$6.50
Fire Sleeve - 1.25 Inch (31.75 mm) O.D. Hose (Stack of 2x AN-10 / AN-12) - Black Silicone over knitted fiberglass

Fire Sleeve - 1.25 Inch (31.75 mm) O.D. Hose (Stack of 2x AN-10 / AN-12) - Black Silicone over knitted fiberglass - Per Foot (12 Inch) Unit - Made In USA

FIRE SLEEVE
$7.25
In-Line Filter - AN-12 Male Inlet / Outlet - 60 Micron

In-Line Filter - AN-12 Male Inlet / Outlet - 60 Micron (.0023 Inch) Serviceable Stainless Steel Filter Cartridge - 4.50" Long x 2.00" Dia. - Billet Aluminum Red Anodized - PETERSON FLUID SYSTEMS

Peterson Fluid Systems
$175.00
Hot Air Socket Heater Block Off Cover Plate - Left Side Engine Fan Shroud Behind Ignition Distributor

Hot Air Socket Heater Block Off Cover Plate - Left Side Engine Fan Shroud Behind Ignition Distributor - (1965-1989) PORSCHE 911 / 930 Turbo (2.0L - 3.3L Engines) - Fabricated Steel Sheet Metal Black Powdercoated - PATRICK MS USA

Ideal for high performance and racing engines removing heater ducting system and replacement of heat exchangers with header exhaust manifolds.

 PATRICK MOTORSPORTS USA
$140.00

Customer Testimonials

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!