SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

Front Strut Brace - Suspension - Porsche 911 / 912 / 930 / Turbo

Front Strut Brace - Suspension - PORSCHE 911 / 912 / 930 / Turbo
PART # 911 341 FSB
3.50 LBs
$210.00

Patrick Motorsports Exclusive

Front Strut Brace - Spans the stock towers - PORSCHE 911 / 912 / 930 / Turbo - Lightweight polished aluminum tube with steel zinc plated adjustable tension ends - PATRICK MS USA

This is must have for any early chassis looking to increase rigidity for better handling performance.

 PATRICK MOTORSPORTS USA

Project Cars Using Front Strut Brace - Suspension - Porsche 911 / 912 / 930 / Turbo

1973 911 RSR | 3.8L Twin Turbo | 6 Speed911 RSR IROC Street Racer | 3.8L DME | Euro 9151973 911 T to RSR Retro Creation | 3.6L V-Ram | G50 SBH1987 930 Turbo 3.4L Twin Plug Ignition911 RS - 3.6L DME / G50 SBH (1972)911 RSR 3.8L NA | G50 5 Speed1978 930 Turbo - Group B RS / RSR Race car

Cars That Fit

930 1978-1989 3.3L H6 Turbo
911 1964-1969 2.0L H6 NA
1970-1971 2.2L H6 NA
1972-1973 2.4L H6 NA
1973-1974 2.7L H6 NA
1973-1974 3.0L H6 NA
1974-1977 2.7L H6 NA
1975-1977 3.0L H6 Turbo
1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera
912 1965-1969 1.6L H4 NA
1965-1969 2.0L H4 NA

Related Parts

911 - 912 Front Lower Control Arm Bearing Bushing Set

911 - 912 Front Lower Control Arm Bearing Bushing Set

Patrick Motorsports Exclusive
901 341 005 PMS
1 In Stock
1.00 lbs

Front Lower Control Arm Bearing Bushing Set - Early - (1965-1969) PORSCHE 911 / 912 - Sport / Motorsport Semi-Solid Type - Machined Delrin® - PATRICK MS USA

+ 4 Piece Set / 1 Set Per Car
+ Installs onto PNs: 901 341 005 00 / 901 342 006 00 - Control Arm L/R
+ Extremely durable, self lubricating with Teflon® & will not squeak.

PORSCHE did not offer replacement bushings for the front lower control arms but instead they offered entire replacement arms inclusive of newer rubber bushings. These parts are specially developed to replace the original equipment rubber with a hard plastic material known as Delrin® while re-using the original control arms.

 PATRICK MOTORSPORTS USA
$110.00
BILSTEIN PORSCHE 911 / 930 - RS / RSR Suspension System - Complete Front & Rear Adjustable Coil Over Damper Set

PORSCHE 911 RSR Suspension System - Complete Front & Rear Adjustable Coil Over Damper Set - Ideal for racing or high performance road use (1972-1989) 911 / 930 Cars with A or S Front Calipers / (89mm Bolt Spacing) - PATRICK MS USA / BILSTEIN

Complete Set Includes:
+ Struts - Front Left / Right - (Racing RSR) (Valving: 100 Compression / 220 Rebound) - Revised Spindle Positioning to Increased 19mm
+ Front Adjustable Billet Spring Hardware Set with Spring Seat Bearings
+ Shock Absorber Rear Left / Right - Racing PORSCHE 934 Type - (Valving: 180 Compression / 220 Rebound)
+ Rear Adjustable Billet Spring Hardware Set
+ Rear Lower Shock Mounts - Uniball
+ Intermediate Coil Spring to Spring Dividing Collar Set Front / Rear

Recommended Supplement Parts:
- Starting with 2.25 x 600 Inch I.D. Coil Spring Set @ 300 Lbs. (Available Separately)
- Helper or Progressive Tender Spring Set with 2.25 Inch I.D. (Available Separately)
- Front Upper Camber Plate / Strut Mount Set (Available with or without uniball)

 PATRICK MOTORSPORTS USABILSTEIN
$3,200.00
911 912 914 930  Front Suspension Control Arm Set

911 912 914 930 Front Suspension Control Arm Set

Patrick Motorsports Exclusive
911 341 900 PMS
20.00 lbs

Front Control Arm Set - PORSCHE 911 / 914 / 930 Turbo Front Axle Suspension - Modified for early type through body anti sway bar - D Loop style mounts replaced with U tab style drop link connectors - Reconditioned set includes Left / Right control arms (911 Spline) complete with forward / aft bushing brackets - Black power coated finish. | PATRICK MS USA

$200.00 CORE CHARGE, PN: CORE PMP 911 914 FCAKT THESE MUST BE PORSCHE 911 TYPE WITH 911 SPLINES AND INCLUDE THE CARRIER BEARINGS>
- 911 Front Axle Control Arm Assembly Set
+ Include Complete Left & Right Set of: Control Arms & Bearing Retainer Brackets

Tech Tip:
IF YOU’RE LOOKING FOR MORE RESPONSIVE RIDE AND HANDLING USE THE DELRIN BUSHINGS ON ALL SUSPENSION MOUNTS. THE FACTORY RUBBER MOUNTS WILL SOFTEN WITH AGE AND THIS WILL CAUSE LOOSE AND UNRESPONSIVE HANDLING

+ Replacement Bushings available in precision machined Delrin or original style rubber.

 PATRICK MOTORSPORTS USAPATRICK USED PARTSGENUINE PORSCHE
$680.00
911 - 914 - 930 Front Lower Control Arm Bearing Bushing Set

911 - 914 - 930 Front Lower Control Arm Bearing Bushing Set

Patrick Motorsports Exclusive
911 341 901 PMS
26 In Stock
1.00 lbs

Front Lower Control Arm Bearing Bushing Set - Late - (1969-1989) PORSCHE 911 / 914 / 930 - Sport / Motorsport Semi-Solid Type - Machined Delrin® - PATRICK MS USA

+ 4 Piece Set / 1 Set Per Car & Includes Installation Instructions
+ Installs onto PNs: 911 341 901 00 / 911 341 902 00 / 930 341 901 00 / 930 341 902 00 - Control Arm L/R
+ Extremely durable, self lubricating with Teflon® & will not squeak.

PORSCHE did not offer replacement bushings for the front lower control arms but instead they offered entire replacement arms inclusive of newer rubber bushings. These parts are specially developed to replace the original equipment rubber with a hard plastic material known as Delrin® while re-using the original control arms.

 PATRICK MOTORSPORTS USA
$110.00
911 930 935 RSR Lightweight Front Control Arm & Cross Member Suspension Set

911 930 935 RSR Lightweight Front Control Arm & Cross Member Suspension Set

Patrick Motorsports Exclusive
911 341 935 FR
16.00 lbs

RSR Lightweight Front Control Arm & Cross Member Suspension Set - (1969-1989) PORSCHE 935 RSR / 911 / 930 Turbo / 914 - Allows fully adjustable camber, caster and wheel base - Fabricated, Nickel Plated 4130 Alloy Arms / Anodized Billet Aluminum - Precision PTFE spherical bearings - High Strength Hardware - ERP / PATRICK MS USA

 PATRICK MOTORSPORTS USA
$1,850.00
 911 - 914 - 930 Turbo Front Strut Supporting Mount Set Camber Plate - 911 RSR

911 - 914 - 930 Turbo Front Strut Supporting Mount Set Camber Plate - 911 RSR

Patrick Motorsports Exclusive
911 343 002 KT
3.00 lbs

Front Strut Supporting Mount Set - RSR Solid with Spherical Mono-Ball Bearing Cartridges - Adjustable Mounting Positions with -1 Deg. Camber Offset - PORSCHE 911 / 914 / Turbo (-1989) - Mil-Spec Black Anodized Billet Aluminum - Left / Right Set - PATRICK MS USA

+ NOTES: Includes damper mounting bushing hardware set.
+ Use with stock struts require PN: 999 343 012 K1
+ Recommended to inhibit coil spring binding PN: 999 343 006 K1 - Spring Seat Bearing Set

 PATRICK MOTORSPORTS USAMODE - Motorsport Design
$490.00
911 / 930 Roll Bar Cage Harness Coupe Chassis Suspension

911 / 930 Roll Bar Cage Harness Coupe Chassis Suspension

Patrick Motorsports Exclusive
911 930 SARB PMP
10 In Stock
80.00 lbs

Roll Bar - 911 / 930 Coupe - 4 Point Weld In Stand Alone with Integral Harness Bar - Designed for all (1969-1989) 911 / 930 Turbo Coupe models (Not for Cabrio / Targa) - TIG Welded Construction with 1.75 x .120 Inch DOM Steel Tubing - PATRICK MS USA - CERTIFIED BATCH PRODUCTION

+ Designed for motorsport use only.
+ Conforms / Exceeds PCA / SCCA / FIA specifications.* Please check local racing regulations for updates before ordering.
+ Freight Domestic: $190-250 Range - Please contact us for current estimates or international shipping rates.
+ Custom finishing with powder coating: $100 Additional - Please contact us for options.
+ Please see our 911 / 930 project gallery for installation images.

 PATRICK MOTORSPORTS USA
$700.00
911 930 Turbo Tie Rod Assembly with Anti-Bump Steer Kit

911 930 Turbo Tie Rod Assembly with Anti-Bump Steer Kit

Patrick Motorsports Exclusive
930 347 STR AB PMS
4.88 lbs

911 930 Turbo Tie Rod Assembly with Anti-Bump Steer Kit - Front Axle Steering - For Lowered Street | Sport | Racing - All Models -1989 PORSCHE 911 / 912 / 914 / 930 Turbo - LEMFOERDER / PATRICK MS USA

 PATRICK MOTORSPORTS USALemfoerderGENUINE PORSCHE
$605.00
911 930 Turbo Tie Rod Assembly steering Conversion

911 930 Turbo Tie Rod Conversion Assembly - Front Axle Steering - Sport | Racing - All Models -1989 PORSCHE 911 / 912 / 914 / 930 Turbo - LEMFOERDER / PATRICK MS USA

LemfoerderGENUINE PORSCHE
$225.00
911 930 935 Coil Over Spring Hardware Set - Front Left & Right Suspension

Coil Over Spring Hardware Set - BOTH Front Left & Right Suspension - (1972-1989) PORSCHE 911 / 930 Turbo / 934 / 935 - For 2.25mm I.D. Springs Adjustable Spring Perch / Hat for Motorsport Threaded Body Dampers Only - Billet Aluminum Mil Spec Black Anodized - MODE / PATRICK MS USA

 PATRICK MOTORSPORTS USAMODE - Motorsport Design
$150.00
Spring Perch Seat Bearing Set 2.25 Inch Springs

Spring Perch Seat Bearing Set 2.25 Inch Springs

Patrick Motorsports Exclusive
999 343 006 K1 PMS
5 In Stock
0.30 lbs

Suspension Spring Seat Perch Bearing Set - (2.25 Inch) Springs - Installed on the Lower Spring Perch to Eliminate Binding / Clunking - PATRICK MS USA

+ Only for 2.25 Inch Springs

 PATRICK MOTORSPORTS USA
$80.00
911 930 Rear Adjustable Coil Over Spring Hardware Set

911 / 930 Rear Coil Over Spring Hardware Set - Adjustable Rear Axle Suspension - Use with 2.25 Inch I.D. Coil Springs and M52 x 1.50 Threaded Body Dampers - Billet Aluminum Mill Spec Black Anodized - PATRICK MS USA

+ This set is specially designed from the original RSR 911 / 930 cars with threaded body dampers and installs on the top inside the turret mount. Application for coil-over type suspension system when updates or removal of the rear torsion bar system.

 PATRICK MOTORSPORTS USA
$240.00
Strut Suspension - Front Right - (Racing RSR) - PORSCHE 911 / 930 Turbo / 934 / 935

Strut Suspension - Front Right - (Racing RSR) - (1972-1989) PORSCHE 911 / 930 Turbo / 934 / 935 - Valving 161/160 - (Reinforced Spindle) - Threaded Body with lower spring seat hardware - (VS 1453 R) BILSTEIN - MSRP: $999.58

+ Caliper Bolt Hole Spacing = 89mm C.C.
+ Note: (1972-1977) 911 - Only for cars with Larger "A" or "S" Calipers
+ Replaces PN: K4-V36-58773H0 - Green Body

BILSTEIN
$943.00
Strut Suspension - Front Left - (Racing RSR) - PORSCHE 911 / 930 Turbo / 934 / 935

Strut Suspension - Front Left - (Racing RSR) - (1972-1989) PORSCHE 911 / 930 Turbo / 934 / 935 - Valving 161/160 - (Reinforced Spindle) - Threaded Body with lower spring seat hardware - (VS 1453 L) BILSTEIN - MSRP: $999.58

+ Caliper Bolt Hole Spacing = 89mm C.C.
+ Note: (1972-1977) 911 - Only for cars with Larger "A" or "S" Calipers
+ Replaces PN: K4-V36-58774H0 - Green Body

BILSTEIN
$943.00
911 / 930 TORSION BAR SET - (21MM) FRONT AXLE SUSPENSION

911 / 930 TORSION BAR SET - (21MM) FRONT AXLE SUSPENSION

SUS 901 343 100 21 SWA
3 In Stock
25.00 lbs

Torsion Bar Set - (21mm) Front Axle Suspension - (1965-1989) PORSCHE 911 / (1975-1989) PORSCHE 911 Turbo Carrera / 930 - Tubular Aircraft Alloy Steel / Heat Treated / Powder Coated - SWAY-A-WAY USA (Left / Right Set)

+ Replaces PNs:
901 343 101 12 / 901 343 102 12 - Torsion Bar Left / Right - (19mm)

SWAY-A-WAY
$385.00
911 / 930 TORSION BAR SET - (22MM) FRONT AXLE SUSPENSION

911 / 930 TORSION BAR SET - (22MM) FRONT AXLE SUSPENSION

SUS 901 343 100 22 SWA
3 In Stock
25.00 lbs

Torsion Bar Set - (22mm) Front Axle Suspension - (1965-1989) PORSCHE 911 / (1975-1989) PORSCHE 911 Turbo Carrera / 930 - Tubular Aircraft Alloy Steel / Heat Treated / Powder Coated - SWAY-A-WAY USA (Left / Right Set)

+ Replaces PNs:
901 343 101 12 / 901 343 102 12 - Torsion Bar Left / Right - (19mm)

SWAY-A-WAY
$385.00
911 / 930 Torsion Bar Set - (29mm) Rear Axle Suspension

911 / 930 Torsion Bar Set - (29mm) Rear Axle Suspension

SUS 911 333 100 29 SWA
2 In Stock
35.00 lbs

Torsion Bar Set - (29mm) Rear Axle Suspension - (1965-1986) PORSCHE 911 / (1975-1989) PORSCHE 911 Turbo Carrera / 930 - Tubular Aircraft Alloy Steel / Heat Treated / Powder Coated - SWAY-A-WAY USA (Left / Right Set)

+ Replaces PNs:
901 333 101 05 / 901 333 102 05 - Torsion Bar Left / Right - (23mm)
901 333 101 06 / 901 333 102 06 - Torsion Bar Left / Right - (22mm)
911 333 102 09 / 911 333 101 09 - Torsion Bar Left / Right - (24.1mm)
911 333 101 03 / 911 333 102 03 - Torsion Bar Left / Right - (26mm)

SWAY-A-WAY
$435.00
911 / 930 Torsion Bar Set - (30mm) Rear Axle Suspension

911 / 930 Torsion Bar Set - (30mm) Rear Axle Suspension

SUS 911 333 100 30 SWA
2 In Stock
35.00 lbs

Torsion Bar Set - (30mm) Rear Axle Suspension - (1965-1986) PORSCHE 911 / (1975-1989) PORSCHE 911 Turbo Carrera / 930 - Tubular Aircraft Alloy Steel / Heat Treated / Powder Coated - SWAY-A-WAY USA (Left / Right Set)

+ Replaces PNs:
901 333 101 05 / 901 333 102 05 - Torsion Bar Left / Right - (23mm)
901 333 101 06 / 901 333 102 06 - Torsion Bar Left / Right - (22mm)
911 333 102 09 / 911 333 101 09 - Torsion Bar Left / Right - (24.1mm)
911 333 101 03 / 911 333 102 03 - Torsion Bar Left / Right - (26mm)

SWAY-A-WAY
$435.00
911 / 930 G50 Torsion Bar Set - (30mm) Rear Axle Suspension

911 / 930 G50 Torsion Bar Set - (30mm) Rear Axle Suspension

SUS 911 333 110 30 SWA
2 In Stock
11.50 lbs

Torsion Bar Set - (30mm) Rear Axle Suspension - (1987-1989) PORSCHE 911 (G50.00.01.02) / (1989) PORSCHE 930 (G50.50 Trans) - Tubular Aircraft Alloy Steel / Heat Treated / Powder Coated - SWAY-A-WAY USA (Left / Right Set)

+ Replaces PNs:
911 333 115 00 / 911 333 116 00 - Torsion Bar Left / Right - (25mm)
930 333 115 01 / 930 333 116 01 - Torsion Bar Left / Right - (27mm)

SWAY-A-WAY
$500.00
Threaded Pin - Front Axle Strut (Strut to Ball Joint) - 911 / 912 / 914 / 930 Turbo

Threaded Pin - Front Axle Strut (Strut to Ball Joint) - 911 / 912 / 914 / 930 Turbo - OE Supplier Germany - MSRP: $26.45

+ Also use PN: 999 084 019 02 - Locking Nut

Original Equipment Supplier
$20.00
Front Sway Bar System - 911 912 914 930

Anti-Sway Bar Stabilizer System - Front Axle Suspension - PORSCHE 912 / 914 / 911 / 930 - 22 MM Hollow Lightweight - 4130 Chromoly Heat Treated - TARRETT

+INCLUDES: ADJUSTABLE 6061-T6 ALUMINUM BEARING BLOCKS, DROP LINKS AND ARMS WITH ZINC PLATED STEEL HARDWARE

Application Note: (1974-1989) PORSCHE 911 / 930 MODELS ALSO USE: DROP LINK U-BRACKET & NUT PLATE ADAPTER SET

TARETT ENGINEERING
$475.00
Rear Anti Sway Bar 912 911 930 - Tubular Hollow

Rear Anti Sway Bar 912 911 930 - Tubular Hollow

SUS RSBA22L
1 In Stock
15.00 lbs

Rear Anti Sway Bar Set - PORSCHE 912 / 911 / 930 - 22mm Lightweight Tubular Hollow Bar - Fully adjustable complete with Aluminum Alloy bearing blocks, drop link set and hardware - TARETT ENGINEERING

+ When applying this set, we recommend updated sway bar mount busing brackets. See PN: 911 501 983 00

TARETT ENGINEERING
$558.00

Customer Testimonials

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!