SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

Front Center Mount Oil Cooler Set - 911 930 Rsr Style

Front Center Mount Oil Cooler Set - 911 930 RSR Style
PART # 911 207 FMOC RSR
12.00 LBs
$905.00

Patrick Motorsports Exclusive

911 RS / 930 RSR Style Front Center Mount Oil Cooler Set - Supplement kit for cars with (1969-1989) PORSCHE 911 Carrera / 930 Turbo right front fender mounted oil coolers. Typical Hose Line Lengths: 1) Qty. 38 Inches (965mm) & 1) Qty. 65 Inches (1651mm)

OIL COOLER Size: 23.50 x 5.50 x 2.25 Inches (59.69 x 13.97 x 5.72 cm) - 4x) 3/4 NPT Ports - 1.04L Capacity

+ Complete installation kit: Custom Setrab Cooler, AN-12 SS braided oil hose / fitting set.

Will mount directly to original 30mm Fitting on Hard Lines.

+ Use only with front bumper with oil cooler duct opening.

+ Ideal for use on engine conversions, Turbo, sport and racing cars.

 PATRICK MOTORSPORTS USAGoodridgeSetrab

Project Cars Using Front Center Mount Oil Cooler Set - 911 930 Rsr Style

1974 911 IROC | 3.8L Slide Valve DME MoTeC | R50-50 6-Speed1975 911 RSR 3.8L Complete Build1973 911 RSR | 3.8L Twin Turbo | 6 Speed911 RSR IROC Street Racer | 3.8L DME | Euro 9151987 930 Turbo 3.4L Twin Plug Ignition1973 911 T to RSR Retro Creation 3.6L V-Ram G50 gearbox1978 930 Turbo - Group B RS / RSR Race car 1976 911 Turbo Carrera | 95 3.6L DME Conversion1974 911 RSR Clone | 3.6L DME | HVAC | 915 Transmission

Cars That Fit

930 1978-1989 3.3L H6 Turbo
911 1973-1974 2.7L H6 NA
1973-1974 3.0L H6 NA
1974-1977 2.7L H6 NA
1975-1977 3.0L H6 Turbo
1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera

Related Parts

Front Center Mount Oil Cooler - 911 RS - 914 GT

Front Center Mount Oil Cooler - 911 RS - 914 GT

Patrick Motorsports Exclusive
901 207 GT FOC PMP
25 In Stock
8.00 lbs


Front Center Mount Oil Cooler - 911 RS / 914-6 GT Competition Dual Pass - 2x) AN-12 Feed / Return on same side | Cooling Area: 17.75 (450.85) x 4.25 (107.95) x 1.90 (48.26) | O.A.L. 21.50 (546.10) In (mm) - Epoxy Black Finish - Includes mounting tabs - SETRAB / PATRICK MS USA EXCLUSIVE

*New Design* allows for interchangeable fittings, sized to your particular application.
Includes (2) 22MM AN-12 fittings.
Can be used with 22MM AN-6, AN-8, AN-10, etc.

+ Specially Designed Production - Manufactured by Setrab of Sweden

 PATRICK MOTORSPORTS USASetrab
$485.00
Engine Oil Feed Pipe Adapter - 911 S Hose to 964 3.6L Engines

Engine Oil Feed Pipe Adapter - 911 S Hose to 964 3.6L Engines

Patrick Motorsports Exclusive
911 107 964 OP PMS
1 In Stock
1.00 lbs

964 Engine Oil Feed Pipe Adapter - (1970-1989) 911 / 930 Oil Tank S (Suction) Hose to (1990-1994) 964 3.6L Engine | Threads into case half right side (M24X1.50) - CNC Machined Stainless Steel - PATRICK MS USA
+ Includes M24 Aluminum Sealing Ring

+ Replaces PN: 964 207 257 11 - Oil Pipe
+ Connects to PNs: 911 107 233 00 / 930 107 233 02 - Oil Suction Hose

+ (1994-1998) 993 Applications use PN: OIL 911 107 993 OP PMS - 993 Engine Oil Feed Pipe Adapter

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSION
$145.00
Front Center Mount Oil Cooler Set - 911 RS Style

Front Center Mount Oil Cooler Set - 911 RS Style

Patrick Motorsports Exclusive
911 207 FMOC
9.00 lbs

911 RS Style Front Center Mount Oil Cooler Set - Supplement kit for cars with (1969-1989) PORSCHE 911 Carrera / 930 Turbo right front fender mounted oil coolers. Typical Hose Line Lengths: 2) Qty. 38 Inches (965mm)

Cooling Area: 17.75 (450.85) x 4.25 (107.95) x 1.90 (48.26)

+ Complete installation kit: Custom Setrab Cooler, AN-12 SS braided oil hose / fitting set.
Will connect to original 30mm hose fittings found on hard lines.

+ Use only with front bumper with oil cooler duct opening.

+ Ideal for use on engine conversions, Turbo, sport and racing cars.

 PATRICK MOTORSPORTS USAGoodridgeSetrab
$705.00
911 / 930 Front Left Side Mount Oil Cooler Set

911 / 930 Front Left Side Mount Oil Cooler Set

Patrick Motorsports Exclusive
911 207 OC FLM PMS
2 In Stock
15.00 lbs

911 / 930 Front Left Side Mount Oil Cooler Set - Supplement kit for cars with (1969-1989) PORSCHE 911 Carrera / 930 Turbo right front fender mounted oil cooler. Ideal for vehicles with the original equipment front bumper / valance - SETRAB / GOODRIDGE / PATRICK MS USA

Installation kit:
1) Setrab 50 Row Cooler
+ AN-12 SS Braided Oil Line
+ Fire Sleeve Material
+ Loom Clamp Set
+ Line / Adapter Fitting Set
+ Rubber Isolator Mounts
+ Washer Bottle relocation kit.

Note:
- Supporting mounting brackets required for installation.
- Horn relocation may be required.
- Supplemental Fan Pack 5.20" may be used.
- 901 207 OC FLM PMS

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONGoodridgeSetrab
$885.00
911 Carrera Front Right Oil Cooler Update Kit

911 Carrera Front Right Oil Cooler Update Kit

Patrick Motorsports Exclusive
911 207 OC FRM
10.00 lbs

911 Carrera Front Right Side Mount Oil Cooler Update Kit - (1969-1989) PORSCHE 911 Carrera / Narrow Body Chassis - Updated OEM Cellular / Radiator Style Cooler Assembly with Original Metric 30mm Fittings.

+ Complete Parts Kit: Oil Cooler, mounting kit, oil line set, cover plate & sealing gasket.
+ Replaces PN: 930 207 050 03 - Oil Cooler (NLA)
+ Ideal for use on engine conversions, Turbo, sport and racing cars.

PMS 911 ENGINE CONVERSIONLAENGERER & REICHGENUINE PORSCHE
$950.00
911 930 Adapter Kit for Radiator Type Oil Cooler (Right Front Fender)

911 930 Adapter Kit for Radiator Type Oil Cooler (Right Front Fender)

Patrick Motorsports Exclusive
911 207 OCM PMS
2 In Stock
2.90 lbs

Adapter Kit for Radiator Type Oil Cooler (Right Front Fender) - (1974-1983) 911 / (1978-1979) 930 Turbo - Contains: Oil Lines & Mounting Hardware - O.E.M. (10 0201 053) - MSRP: $225.22

+ Use with PN: 930 207 053 02 - Engine Oil Cooler (Right Front Fender)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONCohlineGENUINE PORSCHE
$250.00
911 Turbo Carrera - 930 Front Right Side Mount Oil Cooler Update Kit

911 Turbo Carrera - 930 Front Right Side Mount Oil Cooler Update Kit

Patrick Motorsports Exclusive
930 207 OC FRM
10.00 lbs

911 Turbo Carrera - 930 Front Right Side Mount Oil Cooler Update Kit - (1975-1989) PORSCHE 911 Turbo Carrera / 930 Wide Body Chassis - Updated OEM Cellular / Radiator Style Cooler Assembly with Original Metric 30mm Fittings.

+ Complete Parts Kit: Oil Cooler, mounting kit, oil line set, cover plate & sealing gasket.
+ Replaces PN: 930 207 050 03 - Oil Cooler (NLA)

+ Ideal for use on engine conversions, Turbo, sport and racing cars.

PMS 911 ENGINE CONVERSIONLAENGERER & REICHGENUINE PORSCHE
$985.00
911 IROC DP RS Style Front Spoiler Bumper Cover - (1974-1989) PORSCHE 911 / 930 Turbo (WIDE BODY)

911 IROC DP RS Style Front Spoiler Bumper Cover - (1974-1989) PORSCHE 911 / 930 Turbo (WIDE BODY)

Patrick Motorsports Exclusive
BOD 911 505 IROC DP FB 9W
15.00 lbs

911 IROC DP RS Style Front Spoiler Bumper Cover - (1974-1989) PORSCHE 911 / 930 Turbo (Short Hood) - 9 Inch (Wide Body) - Includes Front Center Mount Oil Cooler & Brake Cooling Duct Openings & Mounting Studs - High Quality Batch Production from Lightweight Composite Fiberglass - PATRICK MS USA

+ Use with PN: 000 043 204 81 - Seal
+ Utilizes original 2x PN: 911 631 411 00 - Side Marker Lights
+ Recommend for use with rear deck lid ventilation grill for factory look.
+ Use with PN: 000 043 204 81 - Seal
+ Utilizes original 2x PN: 911 631 411 00 - Side Marker Light
+ Recommended for use with rear decklid ventilation grill for factory look.

+ Note: Product may have different features, please contact us for more information at time of order.

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$885.00
911 RS Front Bumper Cover w/ Oil Cooler Cutout

73 911 RS Front Bumper Cover - Includes Oil Cooler Duct & Block Off Cover - PORSCHE (1969-1973) 911 Narrow Body Width Flares - Lightweight Composite FRP - PATRICK MS USA

 PATRICK MOTORSPORTS USAPATRICK COMPOSITE BODY PARTS
$880.00
Oil Temperature Gauge & Sensor Set - Engine - Transmission - 1/8-27 NPTF

Oil Temperature Gauge & Sensor Set - Engine - Transmission - 1/8-27 NPTF

Patrick Motorsports Exclusive
ELE 310 323 057 VDO PM
1.10 lbs

Oil Temperature Gauge & Sensor Set - Includes Gauge 2 1/16" diameter, 120-300 Deg. F, Ohm Range & Sensor 1/8-27 NPTF - VDO / PATRICK MS USA

+ Excellent for engine or transmission oil coolers.

 PATRICK MOTORSPORTS USAVDO
$74.00
Oil Temperature Sensor for Oil Temperature Gauge - 911 / 930 Turbo / 964 / 993

Oil Temperature Sensor for Oil Temperature Gauge - (1977-1998) PORSCHE 911 / 930 Turbo / 964 / 993 - GENUINE PORSCHE - MSRP: $58.96

GENUINE PORSCHE
$50.00
Temperature Switch Sender - 911 / 930 / 944 Turbo

Temperature Switch Sender - 911 / 930 / 944 Turbo

ELE 930 606 118 00
1 In Stock
0.10 lbs

Temperature Switch Sender - (1984-1989) 911 / Turbo / 356B / 356C - On Crankcase Breather Cover & Front Oil Cooler (Auxiliary Fan) / (1986-1989) 944 Turbo - Turbo Water Pipe - GENUINE PORSCHE - MSRP: $85.93

+ Note: On at 118 Deg. C (244.4 F)
+ For Lower Temp Switch, Use PN: 930 606 118 PM

GENUINE PORSCHE
$90.00
Engine Oil Cooler - (1972-1989) 911 / 930 Turbo

Engine Oil Cooler - (1972-1989) 911 / 930 Turbo - GENUINE PORSCHE
+ Replaces PN: 911 107 041 00

Use with PNs:
+ 2x) 999 704 172 50 - Seal Ring
+ 1x) 999 704 173 50 - Seal Ring
+ 1x) 911 107 233 00 or 930 107 233 02 - Suction "S" Hose

GENUINE PORSCHE
$1,232.99
Mahle Piston and Cylinder Set - 930 Turbo - 3.3 to 3.4L Mahle Motorsports

**SPECIAL: 10% OFF!
Was $5300 :: You save $530**

Discount for a limited time only.

Piston and Cylinder Set - (1978-1989) PORSCHE 911 / 930 Turbo (3.3 to 3.4 Liter, 98 mm, Long Skirt, Slip-In, 7.5:1 Compression) MAHLE MOTORSPORTS - MSRP: $6094.86 - FORGED CYLINDERS

Patrick Motorsports is a MAHLE Master Distributor, and we install what we sell! Please contact us for your particular needs.
(602) 244.0911 sales@patrickmotorsports.com

MAHLE MOTORSPORT
$4,770.00
Oil Cooler - Front Center Mount 500 COM  - 911 914 GT  / RS / RSR

Oil Cooler - Front Center Mount 500 COM - 911 914 GT / RS / RSR

Patrick Motorsports Exclusive
OIL 500 COM 22mm PMP
5 In Stock
7.65 lbs

Oil Cooler - Center Front Mount 500 COM - GT / RS / RSR - Competition Single Pass - Size: 23.50 x 5.50 x 2.25 Inches (59.69 x 13.97 x 5.72 cm) - 4x) 22mm Ports - 1.04L Capacity - Includes 4) 8mm Mounting bungs - Brazed Aluminum & Durable Epoxy Black Finnish - SETRAB / PATRICK MS USA EXCLUSIVE

* UNIONS & PORT PLUGS NOT INCLUDED

+ Supports vehicles to +600 HP range.
+ Specially Designed Production - Manufactured by Setrab of Sweden

 PATRICK MOTORSPORTS USASetrab
$640.00
Engine Oil Thermostat - External Regulator Housing - Right Rear Inner Fender

Engine Oil Thermostat - (1973-1989) 911 / 930 Turbo - External Regulator Housing - Right Rear Inner Fender - (For models with Front Oil Cooler) - Cast Aluminum with 4x 30mm Male Unions - OE Supplier Germany - MSRP: $537.74

Original Equipment Supplier
$440.00
911 - 930 Oil Supply Pipe from Oil Thermostat to Front Cooler Supply Line

Oil Supply Pipe from Oil Thermostat to Front Cooler Supply Line - (1974-1989) PORSCHE 911 / 930 Turbo - O.E.M. Germany

OEM Germany
$647.38
Engine Oil Cooler (In Right Front Fender) - 911 - 930

Engine Oil Cooler (In Right Front Fender) - Cellular Radiator Type Cooler - (1974-1989) 911 / Turbo - Core Size: 13x7x2 In. (330x178x50mm) O.A.L.: 19 In (483mm) - OEM LAENGERER & REICH - MSRP: $1283.67

+ Replaces PN: 930 207 050 03 - Tubular Oil Cooler
+ (1974-1983) 911 / (1978-1979) 930 Use PN: 10 0201 053 - Adapter Kit for Radiator Type Oil Cooler

LAENGERER & REICH
$595.00
Engine Oil Line - Feed Pipe to Front Right Oil Cooler - PORSCHE 911 / 930 Turbo

Engine Oil Line - Feed Pipe to Front Right Oil Cooler - (1965-1989) PORSCHE 911 / 930 Turbo - Longer (230mm) - Braided Flexible Line with Metric 30 Inverted Ends - OES Germany - MSRP: $59.30

+ Replaces PN: 930 207 111 00

Original Equipment Supplier
$45.00
Engine Oil Line - Return Pipe to Front Right Oil Cooler - (1974-1989) 911 / 930 Turbo

Engine Oil Line - Feed Pipe to Front Right Oil Cooler - (1965-1989) PORSCHE 911 / 930 Turbo - Longer (230mm) - Braided Flexible Line with Metric 30 Inverted Ends - OES Germany - MSRP: $59.30

+ Replaces PN: 930 207 111 00

Original Equipment Supplier
$43.00
In-Line Thermal Switch Assembly AN12 Male - AN12 Female

In-Line Thermal Switch Assembly AN12 Male - AN12 Female, 190 Deg. F, 15A, 125V AC (Resistive Load) - Installs inline on oil line, SETRAB - MSRP: $42.00

Setrab
$40.00
Heat Exchanger / Oil Cooler - 50 Row Pro Line STD 1 Series - Setrab

Heat Exchanger / Oil Cooler - 50 Row Pro Line STD 1 Series - (6.42 x 15.31 x 1.97 Inch) - Ports: 22mm x1.50 - SETRAB - MSRP: $496.00

+ Rated for 300-400 HP Range | 29,000-40,000 BTU/Hr

+ Excellent for Porsche 911 / 930 models in the right front fender.
+ Use with Spal PN: 30103013 - 5.2" Paddle Blade Low Profile Fan / 12V Pusher

* SHOWN WITH 45 DEG. FITTINGS & 22mm TO AN-12 UNIONS THAT ARE SOLD SEPARATELY

Setrab
$435.00
Heat Exchanger / Oil Cooler - 72 Row Pro Line STD 1 Series - Setrab

Heat Exchanger / Oil Cooler - 72 Row Pro Line STD 1 Series - (6.42 x 22.13 x 1.97 Inch) - Ports: 22mm x1.50 - SETRAB - MSRP: $674.00

Setrab
$570.00

Catalogs

911/930 DUAL FRONT OIL COOLER LAYOUT

Browse 13 Service Parts

This kit is designed to add to your factory fender mounted oil cooler.Adding an oil cooler system is a must for operation of all air cooled engines in warmer climates as the factory cooler just does not keep your engine operating in its optimal temperature range.Increased tempatures cause premature engine wear and loss of performance. Our systems have been designed to keep your engine operating at its desired operating temperature which extends engine life and improves performance. Also needed is the RS front bumper with oil cooler opening part number BOD911RSFB
We are a stocking distributor for Setrab Cooler Systems. Setrab is a privately owned company founded in 1967. The company has its headquarters and manufacturing facilities in Malmö, Sweden, and operates sales offices in Britain, Germany, Sweden, and in the USA. Setrab develops, manufactures, and markets aluminum heat exchangers for automotive and industrial applications. Patrick Motorsports is proud to utilize Setrab for the variety of specially made Porsche oil cooler packages. We stock and order a variety of sizes for many different applications and also off a full line of Goodridge fluid lines and fittings. Please contact us for a Setrab cooler core or a complete cooler estimate!

Customer Testimonials

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!