SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

Flywheel Clutch Starter Ring Gear 930 Turbo 4 Speed

Flywheel Clutch Starter Ring Gear 930 Turbo 4 Speed
PART # CLU 930 116 230 02 GEN
1.95 LBs
$282.50

Starter Ring Gear - (1978-1988) 911 / 930 Turbo / 930 4 Speed - 240mm - 7.70 mm Thickness - OE Supplier Germany - MSRP: $332.91

GENUINE

Cars That Fit

930 1978-1989 3.3L H6 Turbo
911 1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera

Related Parts

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Patrick Motorsports Exclusive
24036DMEFW PMP
10 In Stock
9.00 lbs

Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm Clutch - 9 Bolt Crankshaft - (1978-1988) PORSCHE 930 Turbo 3.3L / 930 Trans & G50 SBH Trans - (60-2 Timing Configuration) - Billet Steel, Weight: 9.00 Lbs. (4.09 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing (Low Profile)
+ Includes: Rotational Balancing
+ Replaces PN: 930 102 202 01 - Flywheel (1978-1979) 930 Turbo
+ Replaces PN: 930 102 213 00 - Flywheel (1979-1988) 930 Turbo

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION
$550.00
930 / 934 / 935 / 962 Flywheel Lightweight RSR - 240MM

930 / 934 / 935 / 962 Flywheel Lightweight RSR - 240MM

Patrick Motorsports Exclusive
2409LWFW PMP
7.00 lbs

Flywheel - 240mm RSR Lightweight - 930 / 934 / 935 / 962 - 9 Bolt - Scalloped without timing reference - Billet Steel - 7.0 Lbs. (3.17 Kg.) - PATRICK MS USA

+ Computer Balanced
+ Replaces factory flywheel PN: 930 102 213 00 - Flywheel (1979-1988) Porsche 911 / 930 Turbo (10.60 Lbs.)
+ For 930 & G50 Short Bell Housing Transmission conversions, use with PN: 930 102 042 PMS - Pilot Bearing - 50mm Low Profile

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS G50 CONVERSION
$465.00
Starter Ring Gear - 911 Turbo Carrera 930 4 Spd / G50 SBH

Starter Ring Gear - 911 Turbo Carrera 930 4 Spd / G50 SBH

Patrick Motorsports Exclusive
930 116 230 00 PMP
1 In Stock
2.00 lbs

Starter Ring Gear - (1976-1977) PORSCHE 911 Turbo Carrera / 3.0L - Mounts on top of the 240mm Clutch Cover - OE Supplier Germany - MSRP: $261.52

+ Note: 3x Pressure plate limit pin clearance holes
+ Also used with PATRICK MS G50 Short Bell Housing Conversions

PMS G50 CONVERSION GENUINE
$245.00
911 Turbo / 930 Sport Clutch Set - (1978-1988) PORSCHE 911 Turbo 3.3L / 930 4 Speed - Tall Stage 1

911 Turbo / 930 Sport Clutch Set - (1978-1988) PORSCHE 911 Turbo 3.3L / 930 4 Speed - Tall Stage 1

Patrick Motorsports Exclusive
930 116 KEP LWS T1 PMS
3 In Stock
16.48 lbs

911 Turbo / 930 Sport Clutch Set - (1978-1988) PORSCHE 930 Turbo 3.3L / 930 4 Speed (Tall / Deep Bell Housing) - SACHS / KEP / PATRICK MS USA

Set Includes:
+ Sachs Clutch Friction Disc - Spring Hub / Organic Lining
+ Clutch Pressure Plate - (240 mm) HD Sport Stage 1 - (1978-1988) PORSCHE 930 Turbo ("Tall / Deep") - Lightweight Forged Aluminum Cover / Iron friction plate - HD Triple drive straps and rivets - 12.50 Lbs. (5.67 Kg.) - KEP
+ Capacity rated at 550 FT/TQ
+ Original Equipment Cover = 24.80 Lbs.
+ Installs without modification or adapters.

 PATRICK MOTORSPORTS USAPATRICK CLUTCHESKEPSachs
$1,150.00
930 Clutch Adapter Set - For 1978-1988 PORSCHE 930 Turbo 4-Speed

930 Clutch Adapter Set - For 1978-1988 PORSCHE 930 Turbo 4-Speed

Patrick Motorsports Exclusive
930 116 LWC PMS
5 In Stock
2.60 lbs

930 Lightweight Clutch Adapter Set - (1978-1988) PORSCHE 930 Turbo 4-Speed to (1976-1977) Porsche 911 Turbo Carrera, earlier, "low profile" pressure plate covers. Designed to replace the original ~25 Lbs. clutch pressure plate. Two part set includes machined billet stainless steel release bearing adapter & aluminum starter ring gear adapter. Lightweight, optimized, Top Motorsport Quality designed to last the lifetime of the vehicle. Total kit weight: 2.60 Lbs. (1.18 Kg) - PATRICK MS USA

+ Use with PNs:
1) 930 116 081 11 - Clutch Release Bearing
9) 900 074 136 03 - Pressure Plate Bolt

If you are looking for more quicker response and less boost lag from your Porsche 930 turbo then this is the kit for you! These adapter parts are specially designed for use with the lightweight, low profile clutch pressure plate covers to reduce mass. The starter ring gear adapter extension simply stacks on top of the early original 911 Turbo Carrera clutch pressure plate and provides the proper starter ring gear offset. Then the clutch release bearing adapter extension simply snaps into and replaces the original release bearing ears. All original hardware is used.

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPATRICK CLUTCHES
$350.00
Clutch Friction Disc - 930 & G50 240mm Sprung Hub

Clutch Friction Disc - 930 & G50 240mm Sprung Hub

CLU 930 116 014 02 SAC
1 In Stock
3.98 lbs

Clutch Friction Disc - Spring Hub / Organic Lining - 240 mm - (1976-1989) PORSCHE 911 / 930 Turbo - 930 / G50.50 | (1987-1989) 911 G50.00/01/02 - OEM SACHS (1861 568 331) - MSRP: $597.78

Sachs
$415.00
Clutch Release Bearing - (1976-1988) PORSCHE 911 Turbo Carrera 3.0L / 930 Turbo 3.3L

Clutch Release Bearing - (1975-1988) PORSCHE 911 Turbo Carrera 3.0L / 930 Turbo 3.3L - (Only for 930 4 Speed Type Transmission) - SACHS (3151 019 231) - MSRP: $215.38

+ Replaces PN: 930 116 081 00 - Clutch Release Bearing (1975-1977) 911 Turbo Carrera

Sachs
$185.00
Clutch Kit - (1979-1988) PORSCHE 911 / 930 Turbo

Clutch Kit - (1979-1988) PORSCHE 911 / 930 Turbo

CLU 930 116 911 00 SAC
29.10 lbs

Clutch Kit - (1979-1988) PORSCHE 911 / 930 Turbo - OEM SACHS (KF 252 01) - MSRP: $1638.31

+ Contains: (Qty.) (1) Disc w/ torsion spring hub, (1) Pressure Plate, (1) Release Bearing
+ 30.15 Lbs. (13.68 Kg)

Sachs
$1,160.00
Centerforce Clutch Set - PORSCHE 930 Turbo / 3.3L / 930 4 Speed Transmission - 240mm

Centerforce Clutch Set - PORSCHE 930 Turbo / 3.3L / 930 4 Speed Transmission - 240mm

Patrick Motorsports Exclusive
CLU DF252252
1 In Stock
27.50 lbs

Clutch Set - Sport (1978-1988) PORSCHE 930 Turbo / 3.3L / 930 4 Speed Transmission - Matched High Clamp Load Iron Pressure Plate (24.81 Lbs. / 11.25 Kg) & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA - MSRP: $2040.95

+ Precision Balanced
+ Includes Clutch Alignment Tool
+ Use with PN: 930 116 081 11 - Clutch Release Bearing

PATRICK CLUTCHESCenterforce - The Performance ClutchSachs
$1,250.00
Electric Starter - PORSCHE (1965-1989) 914 / 911 - 901 / 915 / 930 / G50 Transaxles

Electric Starter - PORSCHE (1965-1989) 914 / 911 - 901 / 915 / 930 / G50 Transaxles - 9 Tooth ; Direct Drive - (SR 68 N) OEM BOSCH - MSRP: $2132.97

+ NOTE: Also available in a rebuilt, PN: 911 604 101 BX
+ NOTE: Also available in a compact Light weight (< 9 Lbs) application. PN: 911 604 101 N HTS

Bosch
$475.00
Electric Starter - 901 / 915 / 930 / G50 Transaxles & VW / Porsche Type I

Electric Starter - 901 / 915 / 930 / G50 Transaxles & VW / Porsche Type I

Patrick Motorsports Exclusive
ELE 911 604 101 N HTS
5 In Stock
8.80 lbs

Electric High Torque Starter - PORSCHE (1965-1989) 914 / 911 - 901 / 915 / 930 / G50 Transaxles & VW / Porsche Type I Bell Housing - High Torque Gear Reduction - 9 Tooth Pinion Gear - CCW Rotation - 1.4 kW 12V - Rotatable Index - 4.44 to 1 Gearing - Genuine Nippon Denso starter motor / Aluminum Adapters - Compact Light weight (< 9 Lbs) - IMI-101N Batch Production - PATRICK MS USA

 PATRICK MOTORSPORTS USA
$285.00
Flywheel - 240mm - (1979-1988) PORSCHE 930 Turbo / 930 Transmission

Flywheel - 240mm - (1979-1988) PORSCHE 930 Turbo / 930 Transmission - 10.60 Lbs. (4.80 Kg.) - OEM SEBRO - MSRP: $1,101.70

+ Lightweight Option, use PN: PMP2409LWFW - Flywheel - RSR Lightweight

+ For EFI equipped cars, use: PN: PMP24036DMEFW - Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm

SEBRO
$650.00
911 930 Turbo Clutch Pressure Plate Bolt

911 930 Turbo Clutch Pressure Plate Bolt

HAR 900 074 136 03 OEM
21 In Stock
9.00 lbs

Bolt - Flywheel Ring Gear to Clutch Pressure Plate - (1978-1988) PORSCHE 911 / 930 Turbo / 930 4-Speed Transmission - (8 X 80 mm) - Hex Head - 9 Per Car - GENUINE PORSCHE - MSRP: $1.98

+ Torque Spec: 25 Nm (18 ft lb)

Original Equipment Supplier
$1.50

Customer Testimonials

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.