SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

Flywheel - 911 930 Sport Lightweight 3.6l Dme / G50 Sbh Conversion - 240mm

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm
PART # 24036DMEFW PMP
9.00 LBs
$550.00

Patrick Motorsports Exclusive

Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm Clutch - 9 Bolt Crankshaft - (1978-1988) PORSCHE 930 Turbo 3.3L / 930 Trans & G50 SBH Trans - (60-2 Timing Configuration) - Billet Steel, Weight: 9.00 Lbs. (4.09 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing (Low Profile)
+ Includes: Rotational Balancing
+ Replaces PN: 930 102 202 01 - Flywheel (1978-1979) 930 Turbo
+ Replaces PN: 930 102 213 00 - Flywheel (1979-1988) 930 Turbo

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION

Project Cars Using Flywheel - 911 930 Sport Lightweight 3.6L Dme / G50 Sbh Conversion - 240Mm

1979 PORSCHE 930 Turbo | 3.3L EFI MoteC | G50 SBH 5 Speed1974 911 IROC | 3.8L Slide Valve DME MoTeC | R50-50 6-Speed911 ST LONG HOOD CONVERSION | 3.8L V-RAM | G50 SBH911 Carrera to 911 RSR Conversion - 3.6L Twin Turbo - G50-501973 911 T to RSR Retro Creation 3.6L V-Ram G50 gearbox1973 911 to RS Right Hand Drive | 3.6L V-Ram | G50 SBH911 RS - 3.6L DME / G50 SBH (1972)

Cars That Fit

964 1989-1994 3.6L H6 NA 911 Carrera 2/4
1991-1993 3.3L H6 Turbo 965 Turbo
1994 3.6L H6 Turbo 965 Turbo
997 2005-2008 3.6L H6 NA Carrera / GT3
2005-Present 3.6L H6 Turbo GT2
996 1999-2002 3.4L H6 NA Carrera
2001-2004 3.6L H6 Turbo GT2
2002-2004 3.6L H6 NA Carrera / GT3
993 1994-1998 3.6L H6 NA
1996-1998 3.6L H6 Turbo
986 1997-1999 2.5L H6 M96
1997-Present 2.5L-On Boxster Spec Racing
2000-2004 3.2L H6 M96 S
2000-2004 2.7L H6 M96
944 1982-1991
968 1992-1995 3.0L
987 2005-2006 3.2L H6 M96 Boxster / Cayman
2005-Present 2.7L H6 M96 Boxster / Cayman
2007-Present 3.4L H6 M96 Boxster / Cayman
356 1948-1955
1955-1959 A
1959-1963 B
1963-1966 C
914-4 1970-1972 1.7L H4
1973-1976 2.0L H4
1974-1975 1.8L H4
914-6 1970-1972 2.0L H6
930 1978-1989 3.3L H6 Turbo
911 1964-1969 2.0L H6 NA
1970-1971 2.2L H6 NA
1972-1973 2.4L H6 NA
1973-1974 3.0L H6 NA
1973-1974 2.7L H6 NA
1974-1977 2.7L H6 NA
1975-1977 3.0L H6 Turbo
1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera
912 1965-1969 1.6L H4 NA
1965-1969 2.0L H4 NA

Related Parts

911 - 930 RSR Clutch Friction Disc - 930 & G50 - 240mm Racing / Sport

911 - 930 RSR Clutch Friction Disc - 930 & G50 - 240mm Racing / Sport

Patrick Motorsports Exclusive
240 6PD SPH 875 PMP
1 In Stock
3.83 lbs

Clutch Friction Disc - PORSCHE 930 & G50 Transmissions | 240mm Racing / Sport - Sintered Metallic 6 Pad Button - Spring Torsion Hub -8.9mm TO 9.0mm PATRICK MS USA

 PATRICK MOTORSPORTS USAPATRICK CLUTCHES
$350.00
911 G50 Flywheel Conversion to 964 993 3.6L DME 240mm

911 G50 Flywheel Conversion to 964 993 3.6L DME 240mm

Patrick Motorsports Exclusive
24036DMEFWG50 PMP
32 In Stock
10.25 lbs

Flywheel - 964 & 993 3.6L DME Conversion to (1987-1989) G50-00 & G50-50 Transmissions (240mm) - 9 Bolt Crankshaft - (60-2 Timing Configuration) Steel, Weight: 10.25 Lbs. (4.65 Kg.) - PATRICK MS USA

+ Certified Computer Balanced
+ Use with PN: 964 101 187 PM - Bracket Support for Engine Crankshaft Sensor

We also suggest this unit when using MoTeC or engine management systems with the G50-00 and G50-50 transmissions.

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS G50 CONVERSION
$675.00
FLYWHEEL - 240MM '91-'94 3.3L & 3.6L 965 TURBO CONVERSION

FLYWHEEL - 240MM '91-'94 3.3L & 3.6L 965 TURBO CONVERSION

Patrick Motorsports Exclusive
240965FW PMP
10.25 lbs

FLYWHEEL - 240MM '91-'94 3.3L & 3.6L 965 TURBO CONVERSION FLYWHEEL FOR PORSCHE 930 & G-50 SHORT BELL HOUSING TRANSMISSIONS - STEEL

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELS
$565.00
930 / 934 / 935 / 962 Flywheel Lightweight RSR - 240MM

930 / 934 / 935 / 962 Flywheel Lightweight RSR - 240MM

Patrick Motorsports Exclusive
2409LWFW PMP
7.00 lbs

Flywheel - 240mm RSR Lightweight - 930 / 934 / 935 / 962 - 9 Bolt - Scalloped without timing reference - Billet Steel - 7.0 Lbs. (3.17 Kg.) - PATRICK MS USA

+ Computer Balanced
+ Replaces factory flywheel PN: 930 102 213 00 - Flywheel (1979-1988) Porsche 911 / 930 Turbo (10.60 Lbs.)
+ For 930 & G50 Short Bell Housing Transmission conversions, use with PN: 930 102 042 PMS - Pilot Bearing - 50mm Low Profile

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS G50 CONVERSION
$465.00
Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Patrick Motorsports Exclusive
36 CAM BLOCK PMP
14 In Stock
0.18 lbs

Camshaft Block Off Cover Plate Adapter - (1989-1998) PORSCHE 964 / 993, 3.6L Engines - Installs onto cam carrier housing for power steering delete conversion & LH camshaft cover - Features Low profile for non standard camshafts & exhaust header clearance - Billet Aluminum 6061-T6 Mil-Spec Black Anodized - PATRICK MS USA + 964 use 1 per car / 993 use 1 or 2 per car

+ Includes: 999 707 293 40 - O-Ring 40 x 4

+ Replaces PNs:
964 147 185 02 - PS Drive Bracket
964 147 185 05 - PS Drive Bracket
993 105 117 02 - Camshaft Cover LH Side
993 147 185 02 - PS Drive Bracket

+ Also can be used on 911 / 930 (Air Injection Delete)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$75.00
Engine Case Stud to (SBH) Transmission Adapter Set - 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing)

Engine Case Stud to (SBH) Transmission Adapter Set - 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing)

Patrick Motorsports Exclusive
901 915 930 G50 SBH PMS
4 In Stock
0.50 lbs

Engine Case Stud to (SBH) Transmission Adapter Set - Use to mount PORSCHE 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing) 4 & 5 Speed Transmissions to (1978-1989) 930 Turbo 3.3L & (1990-On) 3.6L engine cases - 4 Stud Set (M10) - GENUINE PORSCHE

+ Application Notes: - Torque Spec: 45 Nm (33 ftlb)

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION PMS 915 CONVERSIONGENUINE PORSCHE
$40.00
911 - 930 Accelerator Throttle Cable Conversion Kit to 964 / 993 3.6L DME Engines

911 - 930 Accelerator Throttle Cable Conversion Kit to 964 / 993 3.6L DME Engines

Patrick Motorsports Exclusive
911 964 993 TC PMS
2 In Stock
0.50 lbs

911 / 930 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine - (1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines - PATRICK MS USA

+ Includes adjustable Delrin bulk head fitting
+ Includes installation instructions

Application:
(1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines

Designed to replace the original throttle cable assembly PNs:
PCG 423 024 00 – Throttle Linkage
901 423 223 01 – Extension Rod

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONGENUINE PORSCHE
$290.00
G50 SBH Transmission Clutch Conversion Adapter Set - (911 / 930 / 914)

G50 SBH Transmission Clutch Conversion Adapter Set - (911 / 930 / 914)

Patrick Motorsports Exclusive
930 100 G50 SBH PMS
5 In Stock
2.50 lbs

G50 SBH Transmission Clutch Conversion Adapter Set - (911 / 930 / 914) - Includes components & hardware necessary to mount and install a (240mm) low profile clutch system to the (1987-1989) G50 Short Bell Housing Transmissions - GENUINE PORSCHE / PATRICK MS USA

Set Includes:
+ PMS Engine Case Stud Set - For G50 SBH
+ PMS Transmission Guide Tube Modified for G50 SBH
+ PMS Starter Ring Gear - Modified for G50 SBH
+ 9x PMS Pressure Plate Bolts - Low Profile Type for G50 SBH

Recommended For Use With:
1x 930 Type (240mm) Flywheels
1x 930 (1976-1977) Type Low Profile Clutch
1x 950 116 080 08 - Clutch Release Bearing

 PATRICK MOTORSPORTS USAPATRICK CLUTCHESPMS G50 CONVERSION GENUINE PORSCHE
$430.00
930 Flywheel & Clutch Set -  Lightweight 240mm RSR / Centerforce

930 Flywheel & Clutch Set - Lightweight 240mm RSR / Centerforce

Patrick Motorsports Exclusive
930 102 LWF CFS PMS
1 In Stock
27.00 lbs

Flywheel & Clutch Package - (1978-1988) PORSCHE 930 Turbo - (240mm / 930 4 Speed Transmission) - Sport Street / Track Lightweight High Performance System - CENTERFORCE / SACHS / GENUINE PORSCHE / MODE / PATRICK MS USA

+ Reduces rotating mass +13 Lbs.
+ Holding capacity rated at ~580 ft lbs tq.

This is the ultimate flywheel and clutch system for the Porsche 930 Turbo street or racing car. You can expect a smooth and easy pedal effort and increased responsiveness from the engine. The Centerforce clutch are extremely durable. Suitable for street or sport autocross racing.

Detail component list:
1 PMS Lightweight billet steel RSR type flywheel
1 Centerforce DF255255 lightweight high clamp load pressure plate and spring hub disc
1 Pilot bearing
1 Starter ring gear extension
1 Release bearing extension adapter
1 Release bearing
9 flywheel bolts
9 Pressure plate bolts

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPATRICK CLUTCHESCenterforce - The Performance ClutchMODE - Motorsport DesignGENUINE PORSCHESachs
$2,400.00
Starter Ring Gear - 911 Turbo Carrera 930 4 Spd / G50 SBH

Starter Ring Gear - 911 Turbo Carrera 930 4 Spd / G50 SBH

Patrick Motorsports Exclusive
930 116 230 00 PMP
1 In Stock
2.00 lbs

Starter Ring Gear - (1976-1977) PORSCHE 911 Turbo Carrera / 3.0L - Mounts on top of the 240mm Clutch Cover - OE Supplier Germany - MSRP: $261.52

+ Note: 3x Pressure plate limit pin clearance holes
+ Also used with PATRICK MS G50 Short Bell Housing Conversions

PMS G50 CONVERSION GENUINE
$245.00
930 Clutch Adapter Set - For 1978-1988 PORSCHE 930 Turbo 4-Speed

930 Clutch Adapter Set - For 1978-1988 PORSCHE 930 Turbo 4-Speed

Patrick Motorsports Exclusive
930 116 LWC PMS
5 In Stock
2.60 lbs

930 Lightweight Clutch Adapter Set - (1978-1988) PORSCHE 930 Turbo 4-Speed to (1976-1977) Porsche 911 Turbo Carrera, earlier, "low profile" pressure plate covers. Designed to replace the original ~25 Lbs. clutch pressure plate. Two part set includes machined billet stainless steel release bearing adapter & aluminum starter ring gear adapter. Lightweight, optimized, Top Motorsport Quality designed to last the lifetime of the vehicle. Total kit weight: 2.60 Lbs. (1.18 Kg) - PATRICK MS USA

+ Use with PNs:
1) 930 116 081 11 - Clutch Release Bearing
9) 900 074 136 03 - Pressure Plate Bolt

If you are looking for more quicker response and less boost lag from your Porsche 930 turbo then this is the kit for you! These adapter parts are specially designed for use with the lightweight, low profile clutch pressure plate covers to reduce mass. The starter ring gear adapter extension simply stacks on top of the early original 911 Turbo Carrera clutch pressure plate and provides the proper starter ring gear offset. Then the clutch release bearing adapter extension simply snaps into and replaces the original release bearing ears. All original hardware is used.

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPATRICK CLUTCHES
$350.00
911 TURBO / 930 SPORT CLUTCH SET - (1975-1977) PORSCHE 911 TURBO 3.0L / 930 4 SPEED - RUF SHORT

911 TURBO / 930 SPORT CLUTCH SET - (1975-1977) PORSCHE 911 TURBO 3.0L / 930 4 SPEED - RUF SHORT

Patrick Motorsports Exclusive
930 116 LWS R5 PMS
2 In Stock
15.39 lbs

911 Turbo / 930 Sport Clutch Set - (1975-1977) PORSCHE 911 Turbo 3.0L / 930 4 Speed (Short / Low Profile Bell Housing) - SACHS RE PERFORMANCE / PATRICK MS USA

Set Includes:
+ Clutch Friction Disc - (1976-1988) PORSCHE 930 240mm High Performance "Sport" Spring Hub w/ Organic Lining (Higher Friction) 4.19 Lbs. (1.90 Kg.) - SACHS PERFORMANCE
+ Clutch Pressure Plate - 240mm High Performance - 930 RUF 5-Speed Type, "Low profile" as found on (1976-1977) PORSCHE 930 Transaxles - Lightweight Alloy Cover 11.20 Lbs.

+ Capacity rated at ~650 ft lbs tq
+ For use on (1978-1988) 930 Turbo, use with Low Profile Starter Ring Gear & Release Bearing Adapters.

 PATRICK MOTORSPORTS USAPATRICK CLUTCHESSachsZF SACHS PERFORMANCE
$1,875.00
G50 SBH Transmission Carrier Mount Block Adapter Set - PORSCHE 930 Turbo

G50 SBH Transmission Carrier Mount Block Adapter Set - PORSCHE 930 Turbo

Patrick Motorsports Exclusive
930 G50 SBH 930 78 85 PMS
4 In Stock
2.00 lbs

G50 SBH Transmission Carrier Mount Block Adapter Set - (1978-1985) PORSCHE 930 Turbo to (1987-1989) G50 / 00 / 01 / 02 / 50 SBH (Short Bell Housing) Transmissions - Weld-in on factory torsion bar - Billet Steel - Includes Mounting Hardware - PATRICK MS USA

+ For use with PNs: 911 375 031 09 - Transmission Carrier Mount

 PATRICK MOTORSPORTS USAPMS G50 CONVERSION
$110.00
Shift Rod Adapter 911 930 TO G50 SBH

Shift Rod Adapter 911 930 TO G50 SBH

Patrick Motorsports Exclusive
950 424 G50 SBH PMS
0.71 lbs

G50 SBH Trans Gear Shift Rod Adapter - (1969-1986) 911 & (1975-1988) 911 / 930 Turbo to G50 SBH Short Bell Housing Transmission Conversion - Machined and Fabricated Steel - Black Powdercoated - Includes Isolation Bushings / Hardware - PATRICK MS USA

+ Replaces PN: 950 424 028 03 - Shift Rod Coupler - Bearing Body
+ Use with PN: 950 424 020 04 - Gear Shift Rod

 PATRICK MOTORSPORTS USAPMS G50 CONVERSION
$225.00
Engine Crank Pulley - 964 Single Belt Crank RS / RSR Type

Engine Crank Pulley - 964 Single Belt Crank RS / RSR Type

Patrick Motorsports Exclusive
964 102 050 SBC PMS
59 In Stock
0.70 lbs

Engine Crankshaft Pulley - (1990-1994) PORSCHE 911 / 964 Carrera 3.6L DME Engine to (-89) 911 Single Belt 964 3.6L Engine Conversion / RS / RSR - Includes integral conical hub - 6061 T6 Billet Aluminum Alloy, Mil-Spec Black Anodized - PATRICK MS USA

+ Replaces PN: 964 102 050 01 - Engine Crankshaft Pulley (*Vibration Damper) (M64.01/02/03)
+ Specially Designed for PN: 964 102 021 04 - Crankshaft (M64.01/02/03/50) 964 conical tapered end crankshaft
+ Includes - Hexagon Head Bolt
+ Recommended for use with: 10x750 V-Belt & PN: 993 106 051 80 PMS - RS Fan Impeller Wheel Hub

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$240.00
964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

Patrick Motorsports Exclusive
964 612 173 DME PMS
9 In Stock
1.50 lbs

964 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 Chassis to (1990-1994) PORSCHE 964 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

Interfaces PNs:
964 612 173 02 - Wiring Harness NR.173 - DME - (1989) M481 (Manual Transmission)
964 612 173 04 - Wiring Harness NR.173 - DME - (1990-) M481 (Manual Transmission)
964 612 173 03 - Wiring Harness NR.173 - DME - (-1991) M249 (Tiptronic Transmission)
964 612 173 35 - Wiring Harness NR.173 - DME - (1992-) M249 (Tiptronic Transmission)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$385.00
Engine Crank Pulley - 993 Single Belt Crank RS / RSR Type

Engine Crank Pulley - 993 Single Belt Crank RS / RSR Type

Patrick Motorsports Exclusive
993 102 050 SBC PMS
0.70 lbs

Engine Crankshaft Pulley - (1994-1998) PORSCHE 911 / 993 Carrera 3.6L DME Engine to (-89) 911 Single Belt 993 3.6L Engine Conversion / RS / RSR - For cylindrical (straight) hub end crankshafts - 6061 T6 Billet Aluminum Alloy, Mil-Spec Black Anodized - PATRICK MS USA

+ Replaces PN: 993 102 050 01 - Engine Crankshaft Pulley - 3 Belt Groove (429g)
+ Specially Designed for PN: 993 102 021 01 / 02 - Crankshaft Cylindrical End Crankshaft
+ Includes - Hexagon Head Bolt (Torque Spec: 110 ft/lbs (149 Nm) | Blue Loctite Recommended)
+ Recommended for use with: 10x750 V-Belt & PN: 993 106 051 80 PMS - RS Fan Impeller Wheel Hub

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$240.00
993 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - 964 Chassis

993 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - 964 Chassis

Patrick Motorsports Exclusive
993 612 173 DME PMS
5 In Stock
1.50 lbs

993 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 / 964 Chassis to (1995-1998) PORSCHE 993 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

OUR HARNESSES MAKE YOUR ENGINE SWAPS A PLUG AND PLAY OPERATION, NO DAMAGED COMPONENTS BY INCORRECT WIRING! ALSO RETAIN THAT FACTORY INSTALLED LOOK.

Interfaces PNs:
993 612 173 14 - Wiring Harness NR.173 - DME - (1994)
993 612 173 27 - Wiring Harness NR.173 - DME - (1995)
993 612 173 33 - Wiring Harness NR.173 - DME - (-1997)
993 612 173 35 - Wiring Harness NR.173 - DME - (1998)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONGENUINE PORSCHE
$395.00
GT3 Crank Shaft Pulley Set - Single Belt - Conversion to Early 911 / 930 / 964 / 993

GT3 Crank Shaft Pulley Set - Single Belt - Conversion to Early 911 / 930 / 964 / 993

Patrick Motorsports Exclusive
996 102 117 PMS
3 In Stock
0.72 lbs

GT3 Crank Shaft Conversion Pulley Set for Air Cooled Engines - 911 fan assembly - Anodized Billet Aluminum Pulley, Bolt & Belt - PATRICK MS USA

Application Notes:
+ Bolt Tightening Torque Spec: 110 ft/lbs (149 Nm)
+ For use with PN: 996 102 021 95 - GT3 Engine Crankshaft

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONContinentalGENUINE PORSCHE
$405.00
Clutch Friction Disc - 930 & G50 240mm Sprung Hub

Clutch Friction Disc - 930 & G50 240mm Sprung Hub

CLU 930 116 014 02 SAC
1 In Stock
3.98 lbs

Clutch Friction Disc - Spring Hub / Organic Lining - 240 mm - (1976-1989) PORSCHE 911 / 930 Turbo - 930 / G50.50 | (1987-1989) 911 G50.00/01/02 - OEM SACHS (1861 568 331) - MSRP: $597.78

Sachs
$415.00
930 Clutch Disc - 240mm High Performance

930 Clutch Disc - 240mm High Performance "Sport"

CLU 930 116 014 HP
1 In Stock
4.19 lbs

Clutch Friction Disc - (1976-1988) PORSCHE 930 240mm High Performance "Sport" Spring Hub w/ Organic Lining (Higher Friction) 4.19 Lbs. (1.90 Kg.) - SACHS PERFORMANCE, PN: 88 1861 999 615, MSRP: $1125.83

+ NOTE: Not for use with standard clutch pressure plate cover.

SachsZF SACHS PERFORMANCE
$695.00
Clutch Pressure Plate - 240 mm - 911 Turbo Carrera

Clutch Pressure Plate - 240 mm - 911 Turbo Carrera

CLU 930 116 021 00 SAC
1 In Stock
11.44 lbs

Clutch Pressure Plate - 240 mm - (1976-1977) PORSCHE 911 Turbo Carrera (3.0L H6) - 240mm - Aluminum Cover - OEM SACHS (3082 073 131) - MSRP: $828.65
+ Note: 11.44 Lbs. (5.19 Kg)

*NOTE: 1978-89 (930) 911 TURBO MODELS, THIS PRESSURE PLATE CAN BE USED AS A HIGH PERFORMANCE OPTION WITH COMBINATION OF OUR STARTER RING GEAR AND RELEASE BEARING EXTENSION PARTS - LONGER PRESSURE PLATE BOLTS WILL ALSO BE REQUIRED

Sachs
$565.00
930 Clutch Pressure Plate - 240mm High Performance - 930 RUF 5-Speed Type

Clutch Pressure Plate - 240mm High Performance - 930 RUF 5-Speed Type, "Low profile" as found on 1976-1977 PORSCHE 930 Transaxles - Lightweight Alloy Cover 11.20 Lbs., SACHS PERFORMANCE (594) MSRP: $1866.45

+ Requires Special SACHS PERFORMANCE / "Sport" Organic Clutch Disc, "Race" Metallic disc or PATRICK MOTORSPORTS Metallic disc options. Please contact us for additional options.

*NOTE: FOR 1978-89 (930) 911 TURBO MODELS, THIS PRESSURE PLATE CAN BE USED AS A HIGH PERFORMANCE OPTION WITH COMBINATION OF OUR STARTER RING GEAR AND RELEASE BEARING EXTENSION PARTS

SachsZF SACHS PERFORMANCE
$1,280.00
Clutch Release Bearing - (1976-1988) PORSCHE 911 Turbo Carrera 3.0L / 930 Turbo 3.3L

Clutch Release Bearing - (1975-1988) PORSCHE 911 Turbo Carrera 3.0L / 930 Turbo 3.3L - (Only for 930 4 Speed Type Transmission) - SACHS (3151 019 231) - MSRP: $215.38

+ Replaces PN: 930 116 081 00 - Clutch Release Bearing (1975-1977) 911 Turbo Carrera

Sachs
$185.00
Flywheel Clutch Starter Ring Gear 930 Turbo 4 Speed

Flywheel Clutch Starter Ring Gear 930 Turbo 4 Speed

CLU 930 116 230 02 GEN
1 In Stock
1.95 lbs

Starter Ring Gear - (1978-1988) 911 / 930 Turbo / 930 4 Speed - 240mm - 7.70 mm Thickness - OE Supplier Germany - MSRP: $332.91

GENUINE
$282.50
Clutch Kit - (1979-1988) PORSCHE 911 / 930 Turbo

Clutch Kit - (1979-1988) PORSCHE 911 / 930 Turbo

CLU 930 116 911 00 SAC
29.10 lbs

Clutch Kit - (1979-1988) PORSCHE 911 / 930 Turbo - OEM SACHS (KF 252 01) - MSRP: $1638.31

+ Contains: (Qty.) (1) Disc w/ torsion spring hub, (1) Pressure Plate, (1) Release Bearing
+ 30.15 Lbs. (13.68 Kg)

Sachs
$1,160.00
Clutch Releaser Cable - 911 930

Clutch Releaser Cable - 911 930

CLU 930 423 401 09 COF
0.99 lbs

Clutch Cable - MG 07 - (1977-1986) PORSCHE 911 / 915 & (1978-1988) 911 Turbo / 930 - COFLE - MSRP: $165.90

+ Replaces PN: 930 423 401 05

COFLE
$60.00
Bolt - G50 / 930 SBH Starter Ring Gear to Clutch Pressure Plate

Bolt - G50 / 930 SBH Starter Ring Gear to Clutch Pressure Plate (8 X 50 mm) - 9 Per Car - GENUINE PORSCHE - MSRP: $2.56

+ Features low profile head - Use with PATRICK MS G50 SBH Transaxle Conversions
+ Torque Specification: 24 Nm (18 Ft Lbs)

PMS G50 CONVERSION GENUINE PORSCHE
$2.50
Centerforce Clutch Set - PORSCHE 930 Turbo / 3.3L / 930 4 Speed Transmission - 240mm

Centerforce Clutch Set - PORSCHE 930 Turbo / 3.3L / 930 4 Speed Transmission - 240mm

Patrick Motorsports Exclusive
CLU DF252252
1 In Stock
27.50 lbs

Clutch Set - Sport (1978-1988) PORSCHE 930 Turbo / 3.3L / 930 4 Speed Transmission - Matched High Clamp Load Iron Pressure Plate (24.81 Lbs. / 11.25 Kg) & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA - MSRP: $2040.95

+ Precision Balanced
+ Includes Clutch Alignment Tool
+ Use with PN: 930 116 081 11 - Clutch Release Bearing

PATRICK CLUTCHESCenterforce - The Performance ClutchSachs
$1,250.00
911 Turbo Carrera 930 Clutch Set - Centerforce Clutch Kit - G50 SBH

911 Turbo Carrera 930 Clutch Set - Centerforce Clutch Kit - G50 SBH

Patrick Motorsports Exclusive
CLU DF255255
1 In Stock
15.00 lbs

Clutch Set - 240mm Sport Lightweight (1976-1977) PORSCHE 911 Turbo Carrera / 930 4-Speed Transmission "Short, Low Profile" - Matched High Clamp Load Aluminum Pressure Plate & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA

+ High Clamp Load | Torque Capacity rated at 580 ft/lbs. Light Pedal Effort
+ Also used with lightweight options for (1978-1988) 930 Turbo with adapter or with G50 Short Bell Housing Transaxle Conversions
+ Replaces PN: 930 116 021 00 - Clutch Pressure Plate
+ Replaces PN: 930 116 014 02 - Clutch Disc Spring Torsion Hub

PATRICK CLUTCHESPMS G50 CONVERSION Centerforce - The Performance ClutchSachs
$1,400.00
930 Early Clutch Pressure Plate KEP Stage 1

930 Early Clutch Pressure Plate KEP Stage 1

CLU KEP 930 SI
1 In Stock
9.50 lbs

Clutch Pressure Plate - (240 mm) HD Sport Stage 1 - (1975-1977) PORSCHE 911 Turbo 3.0L / 930 4 Speed (Short / Low Profile Bell Housing) - Lightweight Forged Aluminum Cover / Iron friction plate - HD Triple drive straps and rivets - 9.50 Lbs. (4.30 Kg.) - KEP

+ 550 Ft. Lbs. Torque holding capacity with original, organic disc.
+ Replaces PN: 930 116 021 00 - Clutch Pressure Plate - 240 mm

KEP
$795.00
G50 SBH Clutch Pressure Plate

G50 SBH Clutch Pressure Plate

Patrick Motorsports Exclusive
CLU KEP 930-E1-G50
1 In Stock
9.50 lbs

CLUTCH PRESSURE PLATE - 930 1976-1977- 240mm STAGE I / G50 DIAPHRAGM - HOLDING CAPACITY RATED AT 550 FTLB TORQUE WITH STOCK DISC, 708 FTLB W- 4 OR 6 PUCK BRONZE DISC

* Shown the custom balanced assembly with starter ring gear, clutch pressure plate & Patrick Motorsports 930 EFI flywheel. This assembly is 21 Lbs. (9.53 KG) without the disc, release bearing or mounting hardware.

 PATRICK MOTORSPORTS USAPATRICK CLUTCHESPMS G50 CONVERSION KEP
$795.00
930 Turbo Clutch Pressure Plate - (240 mm) HD Sport Stage 1

Clutch Pressure Plate - (240 mm) HD Sport Stage 1 - (1978-1988) PORSCHE 930 Turbo ("Tall / Deep") - Lightweight Forged Aluminum Cover / Iron friction plate - HD Triple drive straps and rivets - 12.50 Lbs. (5.67 Kg.) - KEP

+ Torque capacity rated at 550 ft/lbs with PN: 930 116 014 02 - Clutch Disc - Organic Sprung Hub
+ Replaces PN: 930 116 021 03 - Clutch Pressure Plate - 240 mm (Cast Iron 24.65 Lbs.)

KEP
$795.00
930 Clutch Pressure Plate KEP Stage 2

930 Clutch Pressure Plate KEP Stage 2

CLU KEP 930L-2
1 In Stock
12.50 lbs

Clutch Pressure Plate - (240 mm) HD Sport Stage 2 - (1978-1988) PORSCHE 930 Turbo ("Tall / Deep") - Lightweight Forged Aluminum Cover / Iron friction plate - HD Triple drive straps and rivets - 12.50 Lbs. (5.67 Kg.) - KEP

+ Torque capacity rated at 700 ft lbs. with stock organic disc.

KEP
$790.00
911 Turbo Early Clutch Pressure Plate KEP Stage 2

911 Turbo Early Clutch Pressure Plate KEP Stage 2

CLU KEP 930S-2
1 In Stock
9.50 lbs

Sport Stage II (2) - (1975-1977) PORSCHE 911 Turbo 3.0L / 930 4 Speed (Short / Low Profile Bell Housing) - Lightweight Forged Aluminum Cover / Iron friction plate - HD Triple drive straps and rivets - 9.50 Lbs. (4.30 Kg.) - KEP

+ 650 Ft. Lbs. Torque holding capacity with original, organic disc.
+ Replaces PN: 930 116 021 00 - Clutch Pressure Plate - 240 mm

**NOTE: THIS COVER HAS INCREASED PEDAL EFFORT

KEP
$690.00
Crankshaft Pulse Sender Reference Sensor - 911 / 964 / 993 / 996 / Turbo / GT2 / GT3

Crankshaft Pulse Sender Reference Sensor - (1990-2005) 911 / 964 / 993 / 996 / Turbo / GT2 / GT3 - OEM BOSCH (0 261 210 205) - MSRP: $238.18

+ Replaces PN: 911 606 217 03 SS
+ Note: Models which have the original rectangular plug must be updated. Also use (Qty.) (1) 999 652 916 40 oval plug housing (3) 999 652 871 22 connectors (3) 999 704 161 40 grommets
+ Use with PN: 964 101 187 01 - Support Bracket for Crankshaft Pulse Sender Reference Sensor

Bosch
$120.00
Air Injection Smog Pump Plug Set 911 / 930 Cylinder Head Exhaust Port

Air Injection Smog Pump Plug Set 911 / 930 Cylinder Head Exhaust Port

Patrick Motorsports Exclusive
ENG 911 113 145 PM
5 In Stock
0.40 lbs

Air Injection System Plug Set - For smog pump air tube delete - Installs into cylinder head exhaust ports - (1974-1983) PORSCHE 911 & (1975-1989) 911 Turbo Carrera / 930 Turbo - 2.7L / 3.0L / 3.3L Engines - PATRICK MS USA

+ 6X Socket Plugs - Steel, CAD Plated
+ 6X Copper Washers

Replaces PNs:
1x) 911 113 043 01 - Air Injection Tube (911 SC)
1x) 930 113 043 02 - Air Injection Tube (911 / 930 Turbo)
6x) 911 113 145 02 - Air Injection Union
6x) 900 123 033 20 - Sealing Ring - A10x13.5

 PATRICK MOTORSPORTS USA
$30.00
Impeller Fan Alternator Pulley Half 911 - 930

Impeller Fan Alternator Pulley Half 911 - 930

ENG 930 106 209 02
3 In Stock
0.10 lbs

Impeller Fan Alternator Pulley Half - (1980-1989) 911 / (1976-1989) 911 Turbo Carrera / 930 Turbo - (Single 82mm) - GENUINE PORSCHE

Use with PN:
+ 1) 928 603 904 00 - Alternator Pulley Nut Kit - (17x1.5mm)

GENUINE PORSCHE
$90.00
Support Bracket for Crankshaft Flywheel Pulse Sender Reference Sensor

Support Bracket for Crankshaft Flywheel Pulse Sender Reference Sensor - Crankcase Left, (1990-2005) PORSCHE 964 / 993 / 996 Turbo / GT3 - GENUINE PORSCHE

+ Replaces PN: 964 101 187 01
+ Use with PN: 911 606 217 03 - Pulse Sender

PATRICK FLYWHEELSPATRICK CLUTCHESPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS 915 CONVERSIONGENUINE PORSCHE
$90.00
Engine Crank Shaft - (1999- ) PORSCHE 911 996 GT3

Engine Crank Shaft - (1999- ) PORSCHE 911 GT3 - GENUINE PORSCHE -

Replaces PNs:
996 102 021 94 - M97.76
996 102 021 92 - M96.79

GENUINE PORSCHE
$2,901.84
Pilot Bearing Boxster Cayman

Pilot Bearing Boxster Cayman

FLW 034 105 313 A
0.06 lbs

PILOT BEARING - '97-'07 PORSCHE BOXSTER/S - CAYMAN/S - INA PORSCHE - LIST: $70.31

GENUINE PORSCHE
$23.98
Flywheel Porsche 356 200mm

Flywheel Porsche 356 200mm

FLW 616 102 201 04 FLY
15.65 lbs

FLYWHEEL - 200 MM - PORSCHE 356 FROM '64 - GENUINE - LIST: $984.02

+ PART NUMBER SUPERSEDES FROM: 616 102 201 03

GENUINE PORSCHESEBRO
$652.00
Flywheel Porsche 911 / 930  Turbo Early

Flywheel Porsche 911 / 930 Turbo Early

FLW 930 102 202 01 GEN
10.60 lbs

Flywheel - 1978-1979 PORSCHE 911 Turbo Carrera - 240 mm - 9 Bolt Crankshaft - 10.60 Lbs.

+ Lightweight Option, use PN: PMP2409LWFW - Flywheel - RSR Lightweight

+ For EFI equipped cars, use: PN: PMP24036DMEFW - Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm

PATRICK FLYWHEELS
$420.00
Flywheel - 240mm - (1979-1988) PORSCHE 930 Turbo / 930 Transmission

Flywheel - 240mm - (1979-1988) PORSCHE 930 Turbo / 930 Transmission - 10.60 Lbs. (4.80 Kg.) - OEM SEBRO - MSRP: $1,101.70

+ Lightweight Option, use PN: PMP2409LWFW - Flywheel - RSR Lightweight

+ For EFI equipped cars, use: PN: PMP24036DMEFW - Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm

SEBRO
$650.00
Bolt - Flywheel to Crankshaft 911 930

Bolt - Flywheel to Crankshaft 911 930

HAR 930 102 206 00 OEM
0.05 lbs

Flywheel Bolt - Crankshaft to Flywheel - M10 X 1.25 - PORSCHE 911 / 930 TURBO / 924S / 944 / 968 / CARRERA GT - 9 Per Car - O.E.M., MSRP: $6.01
+ Torque Specification: 90 Nm (65 Ft Lb)

OEM Germany
$2.50
930 EFI Conversion Set - Intake Manifold Injector Block Flange & Fuel Rail Set - 36mm & 38mm Bore

930 Electronic Fuel Injection Conversion Set - Includes: Billet E.F.I. Injector Block set that will accept BOSCH style injectors, Stainless Steel Fuel Rail Set, and High temp insulator set. Available in 36mm & 38mm intake bore i.d.. Fits 1976 to 1989 PORSCHE 911 / 930 Turbo

+ Please contact us for supporting parts and applications.

MODE - Motorsport Design
$1,500.00
Transmission Clutch Release Spring (1978-1988) 930 Turbo / 4 Speed

Transmission Clutch Release Spring (1978-1988) 930 Turbo / 4 Speed - GENUINE PORSCHE

+ Replaces PN: 930 116 064 09

GENUINE PORSCHE
$243.00
930 Transmission Side Cover - (1976-1988) PORSCHE 911 Turbo Carrera / 930 4 Speed - Billet

930 Transmission Side Cover - (1976-1988) PORSCHE 911 Turbo Carrera / 930 4 Speed - Billet

Patrick Motorsports Exclusive
TRA 930 301 311 BSC PMP
3.50 lbs

930 Transmission Side Cover - (1976-1988) PORSCHE 911 Turbo Carrera / 930 4 Speed - Billet 6061 Aluminum - PATRICK MS USA

+ Features additional ports for oil cooling.
+ Includes ring gear thrust bolt to reduce ring gear deflection under load
+ Optimized for standard and inverted applications.
+ Replaces PN: 930 301 311 02 - Transmission Cover (1976-1988) 911 Turbo / 930 Turbo
930/30, 930/33, 930/34, 930/36, 930/37, 930/67

 PATRICK MOTORSPORTS USA
$495.00
G50 SBH Short Bell Housing Transaxle Gearbox

G50 SBH Short Bell Housing Transaxle Gearbox

Patrick Motorsports Exclusive
TRA 950 G50 01 SBH
146.00 lbs

Complete G50 Short Bell Housing Transaxle Gearbox - For PORSCHE 911 / 930 Turbo - Blueprinted Rebuilds / Conversions

+ Please contact us for professional rebuild and conversion estimates.

 PATRICK MOTORSPORTS USAPMS G50 CONVERSION
$0.00

Customer Testimonials

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!