SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

Engine Sheet Metal Set - Porsche 914-6 3.6l Dme Conversion

Engine Sheet Metal Set - PORSCHE 914-6 3.6L DME Conversion
PART # ENG 9146 SM 36 BPC PMP
5.50 LBs
$0.00

Patrick Motorsports Exclusive

Engine Sheet Metal Set - Black - PORSCHE 914-6 (Application: H6, 3.6L DME Engines) - High Quality Steel Batch Production Set - Black Powdercoated Finish - PATRICK MS USA

When upgrading and converting the PORSCHE 914-4 to the larger displacement H6 cylinder engines, the original engine sheet metal set will not work and needs to be replaced entirely.
* NO LONGER AVAILABLE *

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION

Project Cars Using Engine Sheet Metal Set - Porsche 914-6 3.6L Dme Conversion

916 PORSCHE | 3.8L DME + HVAC | 915 5-Speed 914 6 - 3.2L DME914 6 GT - 3.6L DME

Cars That Fit

914-4 1970-1972 1.7L H4
1973-1976 2.0L H4
1974-1975 1.8L H4
914-6 1970-1972 2.0L H6

Related Parts

Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Patrick Motorsports Exclusive
36 CAM BLOCK PMP
14 In Stock
0.18 lbs

Camshaft Block Off Cover Plate Adapter - (1989-1998) PORSCHE 964 / 993, 3.6L Engines - Installs onto cam carrier housing for power steering delete conversion & LH camshaft cover - Features Low profile for non standard camshafts & exhaust header clearance - Billet Aluminum 6061-T6 Mil-Spec Black Anodized - PATRICK MS USA + 964 use 1 per car / 993 use 1 or 2 per car

+ Includes: 999 707 293 40 - O-Ring 40 x 4

+ Replaces PNs:
964 147 185 02 - PS Drive Bracket
964 147 185 05 - PS Drive Bracket
993 105 117 02 - Camshaft Cover LH Side
993 147 185 02 - PS Drive Bracket

+ Also can be used on 911 / 930 (Air Injection Delete)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$75.00
3.6L Engine Displacement Badge

3.6L Engine Displacement Badge

Patrick Motorsports Exclusive
36L BADGE PMP
22 In Stock

** SUMMER SPECIAL! Was $48.00, you save $9.00 **
Discount for a limited time only.

Engine Displacement Badge Logo Decorative Fitting - (3.6) - Billet Aluminum with black powder coat finish - PATRICK MS USA

+ Includes studs mounting hardware for rear deck lid ventilation grill cover or for cockpit interior installation.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$39.00
914-6 Dual Sport Exhaust Muffler Silencer Set

914-6 Dual Sport Exhaust Muffler Silencer Set

Patrick Motorsports Exclusive
914 111 DMS 225 PMS
14 In Stock
15.00 lbs

914-6 Dual Sport Exhaust Muffler Set - Twin Stainless Steel Mufflers with Polished Dump Tips - 2.25 Inch (57 mm) O.D. Inlet / Outlet - PATRICK MS USA

+ Ideal for RSR / Race Car Applications & Compatible with 915 WEVO Tail Shifting Transmissions
+ Note: 914-6 Rear Lower Valance Requires Tip Exit Holes
+ Application to PMS Stainless Steel Headers / Heat Exchangers, use PN: PMP9146DMS-SSA - Dual Muffler Set for Stainless Steel Header / Heat Exchanger (Includes special offset)

Replaces PN: 901 111 011 11 - Exhaust Silencer 914-6

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$580.00
914 Engine Mount for 914-6 Cylinder 2.0 - 3.8L Engine Conversions - Bolt In Type

914 Engine Mount for 914-6 Cylinder 2.0 - 3.8L Engine Conversions - Bolt In Type

Patrick Motorsports Exclusive
914 375 BIM PMS
3 In Stock
13.50 lbs

914 6 Engine Conversion Mount - (1970-1976) PORSCHE 914-4 to 2.0 - 3.6L H6 Engines - (Bolt In) Bulk Head Cross Bracket Mount to Engine Support Carrier - Includes Urethane Isolation Bushings for Street & Track Use - 3D Optimized Design allows for pivoting engine for direct installation - TIG Welded Steel Fabrication - Black Powdercoat Finish - PATRICK MS USA

+ Fully compatible with original / aftermarket exhaust heat exchangers, brake pressure regulator and original electrical wiring harness.

+ Replaces PNs:
901 115 012 00 - Engine Carrier Bracket
914 375 049 00 - Engine Mounting
914 375 057 00 - Base Upper
914 375 158 00 - Base Lower

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$450.00
914 Engine Mount for 914-6 Cyl 2.0 - 3.8L Engine Conversions - Weld In Type

914 Engine Mount for 914-6 Cyl 2.0 - 3.8L Engine Conversions - Weld In Type

Patrick Motorsports Exclusive
914 375 WIM PMS
10 In Stock
13.50 lbs

914 6 Engine Conversion Mount - (1970-1976) PORSCHE 914-4 to 2.0 - 3.6L H6 Engines - (Weld In) Bulk Head Cross Bracket Mount to Engine Support Carrier - Includes Urethane Isolation Bushings for Street & Track Use - 3D Optimized Design allows for pivoting engine for direct installation - TIG Welded Steel Fabrication - Black Powdercoat Finish (Bulk head support brackets raw steel finish for welding application) - PATRICK MS USA

+ Fully compatible with original / aftermarket exhaust heat exchangers, brake pressure regulator and original electrical wiring harness.

+ Replaces PNs:
901 115 012 00 - Engine Carrier Bracket
914 375 049 00 - Engine Mounting
914 375 057 00 - Base Upper
914 375 158 00 - Base Lower

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$460.00
914-6 ENGINE CHASSIS ADAPTER HARNESS - 914 6 TO 964 / 993 3.6L ENGINE

914-6 ENGINE CHASSIS ADAPTER HARNESS - 914 6 TO 964 / 993 3.6L ENGINE

Patrick Motorsports Exclusive
914 612 CJH 636 PMS
1.00 lbs

914-6 CHASSIS JUMPER HARNESS - PORSCHE 914 6 TO 3.6L 993 '95-'98 ENGINE HARNESS - ENGINE CONTROL PANEL DELETE - PLUGS FROM ENGINE HARNESS TO THE 14 PIN CHASSIS HARNESS - PATRICK MS EXCLUSIVE

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$180.00
914 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine 964 - 993

914 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine 964 - 993

Patrick Motorsports Exclusive
914 964 993 TC PMS
2 In Stock
0.50 lbs

914 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine - (1970-1976) 914 to (1994-1998) 964 / 993 - 3.6L DME Engines - PATRICK MS USA

+ Includes installation instructions

Application:
(1970-1976) 914 to (1994-1998) 964 / 993 - 3.6L DME Engines

Designed to replace the original 914 throttle cable PNs:
914 423 067 00 – 914-4, 1.7 / 2.0
914 423 067 02 – 914-4, 1.7 / 1.8 / 2.0
914 423 067 03 – 914-4 1.8V
914 423 066 00 – 914-6

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$290.00
964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

Patrick Motorsports Exclusive
964 612 173 DME PMS
9 In Stock
1.50 lbs

964 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 Chassis to (1990-1994) PORSCHE 964 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

Interfaces PNs:
964 612 173 02 - Wiring Harness NR.173 - DME - (1989) M481 (Manual Transmission)
964 612 173 04 - Wiring Harness NR.173 - DME - (1990-) M481 (Manual Transmission)
964 612 173 03 - Wiring Harness NR.173 - DME - (-1991) M249 (Tiptronic Transmission)
964 612 173 35 - Wiring Harness NR.173 - DME - (1992-) M249 (Tiptronic Transmission)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$385.00
Hatch Seal Grill Lateral - PORSCHE 914

Hatch Seal Grill Lateral - PORSCHE 914

BOD 914 504 111 10 OES
1.00 lbs

Hatch Seal Grill Lateral - PORSCHE 914 - OE Supplier Germany - MSRP: $13.64

Original Equipment Supplier
$15.00
Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Black

Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Black

Patrick Motorsports Exclusive
ENG 9146 SM BPC PMP
5.50 lbs

Engine Sheet Metal Set - (Black) - PORSCHE 914-6 (Application: H6, 2.0 - 3.0L Engines) - High Quality Steel Batch Reproduction Set - Black Powdercoated Finish - PATRICK MS USA

+ Note: 3.2L with DME & 3.6L DME Engines Fitting & Trim Modifications Required

When upgrading and converting the PORSCHE 914-4 to the larger displacement H6 cylinder engines, the original engine sheet metal set will not work and needs to be replaced entirely.
* NO LONGER AVAILABLE *

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$0.00
Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Raw

Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Raw

Patrick Motorsports Exclusive
ENG 9146 SM PMS
5.50 lbs

Engine Sheet Metal Set - Raw - PORSCHE 914-6 (Application: H6, 2.0 - 3.6L Engines) - High Quality Steel Batch Reproduction Set - Raw Steel Finish - PATRICK MS USA

+ Note: 3.2L with DME & 3.6L DME Engines Fitting & Trim Modifications Required
+ For (2.0-3.0L H6 Engines) use our pre finished and powdercoated set.

When upgrading and converting the PORSCHE 914-4 to the larger displacement H6 cylinder engines, the original engine sheet metal set will not work and needs to be replaced entirely.
* NO LONGER AVAILABLE *

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$0.00
914-6 Engine Oil Tank Body Shell Assembly - Reproduction Dry Sump Conversion

914-6 Engine Oil Tank Body Shell Assembly - Reproduction Dry Sump Conversion

Patrick Motorsports Exclusive
OIL 901 107 005 40 PMS
9.35 lbs

914-6 Engine Oil Tank Body Shell Assembly - Reproduction dry sump oil tank fabricated from aluminum, TIG welded. Features baffled design and billet components - Certified pressure tested - Includes mounting hardware with OE bushings & M22 x 1.50 female feed & return fitting ports. (Use with Metric fittings or M22 to AN-12 & AN-16) - GENUINE PATRICK MS USA

* Filter console, filler neck, fittings & lines sold separately.

> Replaces Genuine Porsche PN: 901 107 005 40 - (914-6) Oil Tank Body Shell

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$800.00

Customer Testimonials

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!