SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

Engine Oil Feed Pipe Adapter - 911 S Hose To 993 3.6l Engines

Engine Oil Feed Pipe Adapter - 911 S Hose to 993 3.6L Engines
PART # 911 107 993 OP PMP
0.50 LBs
$145.00

Patrick Motorsports Exclusive

993 Engine Oil Feed Pipe Adapter - (1970-1989) 911 / 930 Oil Tank S (Suction) Hose to (1994-1998) 993 3.6L Engine | Oil feed plug in union pipe at case half right side - Stainless Steel with o-rings & hardware - PATRICK MS USA

+ Replaces PN: 993 207 250 04 - Oil Pipe
+ Connects to PNs: 911 107 233 00 / 930 107 233 02 - Oil Suction Hose

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSION

Project Cars Using Engine Oil Feed Pipe Adapter - 911 S Hose To 993 3.6L Engines

911 ST LONG HOOD CONVERSION | 3.8L V-RAM | G50 SBH911 RSR IROC Street Racer | 3.8L DME | Euro 9151973 911 T to RSR Retro Creation | 3.6L V-Ram | G50 SBH911 SC | 3.6L DME V-Ram Engine Conversion

Cars That Fit

964 1989-1994 3.6L H6 NA 911 Carrera 2/4
1991-1993 3.3L H6 Turbo 965 Turbo
1994 3.6L H6 Turbo 965 Turbo
997 2005-2008 3.6L H6 NA Carrera / GT3
2005-Present 3.6L H6 Turbo GT2
996 1999-2002 3.4L H6 NA Carrera
2001-2004 3.6L H6 Turbo GT2
2002-2004 3.6L H6 NA Carrera / GT3
993 1994-1998 3.6L H6 NA
1996-1998 3.6L H6 Turbo
986 1997-1999 2.5L H6 M96
1997-Present 2.5L-On Boxster Spec Racing
2000-2004 3.2L H6 M96 S
2000-2004 2.7L H6 M96
944 1982-1991
968 1992-1995 3.0L
987 2005-2006 3.2L H6 M96 Boxster / Cayman
2005-Present 2.7L H6 M96 Boxster / Cayman
2007-Present 3.4L H6 M96 Boxster / Cayman
356 1948-1955
1955-1959 A
1959-1963 B
1963-1966 C
914-4 1970-1972 1.7L H4
1973-1976 2.0L H4
1974-1975 1.8L H4
914-6 1970-1972 2.0L H6
930 1978-1989 3.3L H6 Turbo
911 1964-1969 2.0L H6 NA
1970-1971 2.2L H6 NA
1972-1973 2.4L H6 NA
1973-1974 3.0L H6 NA
1973-1974 2.7L H6 NA
1974-1977 2.7L H6 NA
1975-1977 3.0L H6 Turbo
1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera
912 1965-1969 1.6L H4 NA
1965-1969 2.0L H4 NA

Related Parts

Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Patrick Motorsports Exclusive
36 CAM BLOCK PMP
14 In Stock
0.18 lbs

Camshaft Block Off Cover Plate Adapter - (1989-1998) PORSCHE 964 / 993, 3.6L Engines - Installs onto cam carrier housing for power steering delete conversion & LH camshaft cover - Features Low profile for non standard camshafts & exhaust header clearance - Billet Aluminum 6061-T6 Mil-Spec Black Anodized - PATRICK MS USA + 964 use 1 per car / 993 use 1 or 2 per car

+ Includes: 999 707 293 40 - O-Ring 40 x 4

+ Replaces PNs:
964 147 185 02 - PS Drive Bracket
964 147 185 05 - PS Drive Bracket
993 105 117 02 - Camshaft Cover LH Side
993 147 185 02 - PS Drive Bracket

+ Also can be used on 911 / 930 (Air Injection Delete)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$75.00
Adapter Engine Oil Union Feed 993 - 3.6L Engines - Filter Console

Adapter Engine Oil Union Feed 993 - 3.6L Engines - Filter Console

Patrick Motorsports Exclusive
964 207 317 00 PMS
5 In Stock
0.38 lbs

Adapter Engine Oil Union (Feed) - Crankcase Right Side - (1994-1998) 993 / 3.6L Engines - GENUINE PORSCHE / PATRICK MS USA

+ Ideal for use with (1994-1998) 993, 3.6L Engine Conversions to 914 / 911

Includes PNs:
1) 900 067 247 02 - Screw
1) 999 707 309 40 - O-Ring
1) 999 707 316 40 - O-Ring

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONGENUINE PORSCHE
$98.00
911 - 930 - 914 Single Belt Engine Crank Pulley & Fan Drive Set to 993 3.6L / RSR Conversion

911 - 930 - 914 Single Belt Engine Crank Pulley & Fan Drive Set to 993 3.6L / RSR Conversion

Patrick Motorsports Exclusive
993 102 050 SBCF PMS
5 In Stock
2.00 lbs

993 Single Belt Engine Crankshaft Pulley & Fan Drive Set - (1965-1989) 911 / 914 Single Belt (No AC) to (1994-1998) PORSCHE 993 / 3.6L Engines or to (1994-1998) 993 RS / RSR Conversions - Only for 993 cylindrical (straight) hub end crank - 6061 T6 Billet Aluminum Alloy, Mil-Spec Black Anodized - PATRICK MS USA

Set Includes:
1) RS Fan Alternator Drive Hub
1) Crank Pulley
1) Hexagon Head Bolt (Torque Spec: 110 ft/lbs (149 Nm) | Blue Loctite Recommended)
1) Belt 10x750

+ Replaces PN: 993 102 050 40 - Crankshaft Pulley (3 Groove / Belt) (non-tapper end)
+ Replaces PN: ENG 964 106 051 30 - Fan Hub with Bearing for Engine Cooling Impeller

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$385.00
993 Engine Air Injection Secondary Smog Pump Port Plug Block Off Set (SAI)

993 Engine Air Injection Secondary Smog Pump Port Plug Block Off Set (SAI)

Patrick Motorsports Exclusive
993 113 200 AIB PMS
5 In Stock
0.30 lbs

993 Air Injection Port Plug Block Off Set - (1995-1998) PORSCHE 993 / Turbo 3.6L DME Engines - SAI (Secondary Air Injection) - Installed in top left / right side of camshaft housings - PATRICK MS USA

+ Includes specially designed billet screw plugs and seal ring sets.

Replaces PNs:
900 915 005 02 - Connection Piece
900 123 019 30 - Sealing Ring
993 113 275 01 - Air Tube Left
993 113 288 02 - Air Tube Right
993 624 103 00 / 993 624 103 01 - Air Injection Pump
993 113 250 03 - Check Valve
993 113 251 05 - Distributor Housing
+ All air injection ancillary parts.

The 993, 3.6L DME engines included a secondary air injection system to meet emission control standards. The components of this air injection system consisting of air tubes, distributor housing, check valve and air pump assembly. Working with the exhaust catalytic converter emission control system, it functions to reduce emissions on cold engine start up by injecting air into the engine camshaft housings flowing down through the exhaust ports. When installing and converting to the (1994-1998) 993, 3.6L DME engines to pre 1995 chassis, or race cars, the pump assembly can be removed saving weight and complexity.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$30.00
Engine Oil Case Union Adapter Fitting - Oil Tank to Feed Inlet to Engine AN-16

Engine Oil Case Union Adapter Fitting - Oil Tank to Feed Inlet to Engine AN-16

Patrick Motorsports Exclusive
ENG 901 107 AN16 PMP
5 In Stock
0.40 lbs

Engine Oil Feed Inlet Case Union Adapter Set - (1965-1989) 911 / 914-6 to AN-16 Male - Billet Aluminum with Seal & Stud Mounting Hardware - PATRICK MS USA

+ For use with Engine Oil Filter Consoles.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$120.00
Engine Oil Cooler - (1972-1989) 911 / 930 Turbo

Engine Oil Cooler - (1972-1989) 911 / 930 Turbo - GENUINE PORSCHE
+ Replaces PN: 911 107 041 00

Use with PNs:
+ 2x) 999 704 172 50 - Seal Ring
+ 1x) 999 704 173 50 - Seal Ring
+ 1x) 911 107 233 00 or 930 107 233 02 - Suction "S" Hose

GENUINE PORSCHE
$1,232.99
911 Exhaust System Package - 3.6L to (1975-1989) PORSCHE 911 SC / Carrera Chassis

911 Exhaust System Package - 3.6L to (1975-1989) PORSCHE 911 SC / Carrera Chassis

Patrick Motorsports Exclusive
EXH FPOR-1400-36
75.00 lbs

Exhaust System Package - 3.6L DME Engine to (1975-1989) PORSCHE 911 / Carrera Chassis - Complete System: 1.750 O.D. Mandrel Bent Primary Heat Exchangers, Dual In Muffler System / Dual Out 3.00 Inch Oval Outlet Tips - O2 Sensor Ports, Oil Line System / Adapters / Gasket & Hardware Set - TIG Fabricated Stainless Steel Construction - B&B / PATRICK MS USA

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONB&B Fabrication
$3,100.00
Crankshaft Seal Front Boxster - 996

Crankshaft Seal Front Boxster - 996

GAS 999 113 475 40
0.10 lbs

SEAL - CRANKSHAFT FRONT BOXSTER & "S" CARRERA & CARRERA 4 - LIST $19.17

KACO
$12.30
Oil Hose (

Oil Hose ("S" Hose) Engine Oil Cooler to Oil Reservoir with Slip-On Connections -(1973-1989) PORSCHE 911 - O.E.M. - MSRP: $50.93

+ Note: If new clamps are needed, use (Qty.) (2) 999 512 091 00

Original Equipment Supplier
$30.00
Oil Crossover Pipe from Engine 911

Oil Crossover Pipe from Engine 911

OIL 911 107 739 10
2.10 lbs

Oil Crossover Pipe from Engine - (Passes under transmission) - CAD Plated Steel - Length Approx. 850mm - GENUINE PORSCHE - MSRP: $179.11

PMS 911 ENGINE CONVERSIONCohlineGENUINE PORSCHE
$135.00
930 Turbo Oil Hose S Hose - Engine Oil Cooler to Oil Reservoir

Oil Hose ("S" Hose) Engine Oil Cooler to Oil Reservoir with Slip-On Connections - (1978-1989) PORSCHE 911 TURBO - GENUINE - MSRP: $34.84

+ Note: If new clamps are needed, use (Qty.) (2) 999 512 091 00

GENUINE PORSCHE
$30.00

Customer Testimonials

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.