SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

Anti-Bump Steer Tie Rod End Set - 914 / 911 / 930 Turbo

Anti-Bump Steer Tie Rod End Set - 914 / 911 / 930 Turbo
PART # 930 347 322 PMS
2.50 LBs
$380.00

Patrick Motorsports Exclusive

Anti-Bump Steer Tie Rod End Set - Front Axle Steering - All -1989 PORSCHE 914 / 911 / 930 Turbo - Street / Racing - Includes: Rod end with spherical bearings, protection boots & hardware - PATRICK MS USA

+ Replaces 2) PN: 930 347 322 00 - Tie Rod End

Application Notes:
The anti bump steer kit works by correcting the severe angle of the tie rod end after lowering of these cars. If the anti bump kit is not installed and the car is lowered, upon compression the tie rods can pull the steering out of alignment which is called "bump steer". The racing struts also feature and update to correct this by raising the spindle position. Also most 911s benefit from replacing the tie rods with the turbo edition as well which is a direct replacement kit. So in short, if you plan to lower your car, this would be a kit for you.

 PATRICK MOTORSPORTS USA

Project Cars Using Anti-Bump Steer Tie Rod End Set - 914 / 911 / 930 Turbo

911 RS - 3.6L DME / G50 SBH (1972)1973 911 RSR - 3.8L DME / 6-Speed914-6 GT Jagermeister Tribute914 6 GT - 3.6L DME / 915 - 911 RSR 3.8L NA | G50 5 Speed914 6 - 3.6L DME | 915 Transmission - 1978 930 Turbo - Group B RS / RSR Race car 914 6 GT - Race Car914 6 GT Style | 2.7L | 901 Side Shifter1974 911 RSR Clone | 3.6L DME | HVAC | 915 Transmission914 6 Speedster Racecar HSR 2.0L914 6 - 3.2L DME914 6 GT - 3.6L DME914 6 2.0L - Vintage Racer914 6 - 2.0L Race Car - HSR Champion | SOLD 2013

Cars That Fit

964 1989-1994 3.6L H6 NA 911 Carrera 2/4
1991-1993 3.3L H6 Turbo 965 Turbo
1994 3.6L H6 Turbo 965 Turbo
997 2005-2008 3.6L H6 NA Carrera / GT3
2005-Present 3.6L H6 Turbo GT2
996 1999-2002 3.4L H6 NA Carrera
2001-2004 3.6L H6 Turbo GT2
2002-2004 3.6L H6 NA Carrera / GT3
993 1994-1998 3.6L H6 NA
1996-1998 3.6L H6 Turbo
986 1997-1999 2.5L H6 M96
1997-Present 2.5L-On Boxster Spec Racing
2000-2004 3.2L H6 M96 S
2000-2004 2.7L H6 M96
944 1982-1991
968 1992-1995 3.0L
987 2005-2006 3.2L H6 M96 Boxster / Cayman
2005-Present 2.7L H6 M96 Boxster / Cayman
2007-Present 3.4L H6 M96 Boxster / Cayman
356 1948-1955
1955-1959 A
1959-1963 B
1963-1966 C
914-4 1970-1972 1.7L H4
1973-1976 2.0L H4
1974-1975 1.8L H4
914-6 1970-1972 2.0L H6
930 1978-1989 3.3L H6 Turbo
911 1964-1969 2.0L H6 NA
1970-1971 2.2L H6 NA
1972-1973 2.4L H6 NA
1973-1974 3.0L H6 NA
1973-1974 2.7L H6 NA
1974-1977 2.7L H6 NA
1975-1977 3.0L H6 Turbo
1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera
912 1965-1969 1.6L H4 NA
1965-1969 2.0L H4 NA

Related Parts

Spring to Spring Dividing Collar Set - For use with 2.25 Inch Springs

Spring to Spring Dividing Collar Set - For use with 2.25 Inch Springs

Patrick Motorsports Exclusive
911 341 225 SC PMP
15 In Stock
0.25 lbs

Spring to Spring Dividing Collar Set - For use with 2.25 Inch Springs - Billet Aluminum / Mil-Spec Black Anodized - PATRICK MS USA + Pair 2 Qty.

 PATRICK MOTORSPORTS USA
$50.00
911 930 935 RSR Lightweight Front Control Arm & Cross Member Suspension Set

911 930 935 RSR Lightweight Front Control Arm & Cross Member Suspension Set

Patrick Motorsports Exclusive
911 341 935 FR
16.00 lbs

RSR Lightweight Front Control Arm & Cross Member Suspension Set - (1969-1989) PORSCHE 935 RSR / 911 / 930 Turbo / 914 - Allows fully adjustable camber, caster and wheel base - Fabricated, Nickel Plated 4130 Alloy Arms / Anodized Billet Aluminum - Precision PTFE spherical bearings - High Strength Hardware - ERP / PATRICK MS USA

 PATRICK MOTORSPORTS USA
$1,850.00
Quick Ratio Steering Rack Assembly 911 912 914 930

Quick Ratio Steering Rack Assembly 911 912 914 930

Patrick Motorsports Exclusive
914 347 010 06 QS PMS
8.00 lbs

Close Ratio Steering Rack Assembly - PORSCHE 914 / 911 / 912 / 930 / Turbo - Quickens Ratio 2.50 Lock to Lock - Pre assembly with QUAIFE PN: 40.435.001 - Ring & Pinon Set - Precision machined housing and ring and pinion set-up - Direct replacement pre-built unit by PATRICK MS USA
+ CORE CHARGE $ 300.00

 PATRICK MOTORSPORTS USAGENUINE PORSCHEQuaife
$1,325.00
911 930 Turbo Tie Rod Assembly with Anti-Bump Steer Kit

911 930 Turbo Tie Rod Assembly with Anti-Bump Steer Kit

Patrick Motorsports Exclusive
930 347 STR AB PMS
4.88 lbs

911 930 Turbo Tie Rod Assembly with Anti-Bump Steer Kit - Front Axle Steering - For Lowered Street | Sport | Racing - All Models -1989 PORSCHE 911 / 912 / 914 / 930 Turbo - LEMFOERDER / PATRICK MS USA

 PATRICK MOTORSPORTS USALemfoerderGENUINE PORSCHE
$605.00
911 930 Turbo Tie Rod Assembly steering Conversion

911 930 Turbo Tie Rod Conversion Assembly - Front Axle Steering - Sport | Racing - All Models -1989 PORSCHE 911 / 912 / 914 / 930 Turbo - LEMFOERDER / PATRICK MS USA

LemfoerderGENUINE PORSCHE
$225.00
Strut Suspension - Front Right - (Racing RSR) - PORSCHE 911 / 930 Turbo / 934 / 935

Strut Suspension - Front Right - (Racing RSR) - (1972-1989) PORSCHE 911 / 930 Turbo / 934 / 935 - Valving 161/160 - (Reinforced Spindle) - Threaded Body with lower spring seat hardware - (VS 1453 R) BILSTEIN - MSRP: $999.58

+ Caliper Bolt Hole Spacing = 89mm C.C.
+ Note: (1972-1977) 911 - Only for cars with Larger "A" or "S" Calipers
+ Replaces PN: K4-V36-58773H0 - Green Body

BILSTEIN
$943.00
Strut Suspension - Front Left - (Racing RSR) - PORSCHE 911 / 930 Turbo / 934 / 935

Strut Suspension - Front Left - (Racing RSR) - (1972-1989) PORSCHE 911 / 930 Turbo / 934 / 935 - Valving 161/160 - (Reinforced Spindle) - Threaded Body with lower spring seat hardware - (VS 1453 L) BILSTEIN - MSRP: $999.58

+ Caliper Bolt Hole Spacing = 89mm C.C.
+ Note: (1972-1977) 911 - Only for cars with Larger "A" or "S" Calipers
+ Replaces PN: K4-V36-58774H0 - Green Body

BILSTEIN
$943.00
911 914 Steering Quick Ratio Rack & Pinion Kit  2.5 Turns Lock to Lock

Steering Quick Ratio Rack & Pinion Kit 2.5 Turns Lock to Lock - (-1989) PORSCHE 911 / 914 - LHD & RHD - Set to Upgrade Original Steering Rack - QUAIFE (QSF3Q001)

+ Use with PN: 914 347 010 06 - Steering Gear
+ Note installation will require machine operations.

Quaife
$435.00
Steering Tie Rod Assembly - 911 / 912 / 914

Steering Tie Rod Assembly - 911 / 912 / 914

SUS 911 347 031 00 LEM
2.00 lbs

Steering Tie Rod Assembly - Front Axle Steering (1965-1989) PORSCHE 911 / 912 / 914 / Non Turbo - OEM LEMFOERDER (1209001) - MSRP: $148.01 Each / 2 Per Car

+ For improved handling and feel, we highly recommended the: Turbo Tie Rod Conversion Kit

Lemfoerder
$95.00
930 Turbo Tie Rod Assembly - Front Axle Steering

930 Turbo Tie Rod Assembly - Front Axle Steering

SUS 930 347 031 01 LEM
1.84 lbs

930 Tie Rod Assembly - Front Axle Steering - OEM LEMFOERDER (1209202) - MSRP: $165.48 Each / 2 Per Car
+ Includes: Tie Rod / Rod End / Hardware

Lemfoerder
$100.00
SUS 930 347 322 00

SUS 930 347 322 00

SUS 930 347 322 00
2.00 lbs

TIE ROD END - PORSCHE 911 & TURBO '76- 89' - LEFT OR RIGHT
2 PER CAR - LEMFOERDER - LIST: $54.61

Lemfoerder
$49.00

Customer Testimonials

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!