SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

964 3.6l Dme Engine Wire Harness Conversion To 911 - 930 - 914 - Chassis

964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis
PART # 964 612 173 DME PMS
1.50 LBs
$385.00

Patrick Motorsports Exclusive

964 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 Chassis to (1990-1994) PORSCHE 964 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

Interfaces PNs:
964 612 173 02 - Wiring Harness NR.173 - DME - (1989) M481 (Manual Transmission)
964 612 173 04 - Wiring Harness NR.173 - DME - (1990-) M481 (Manual Transmission)
964 612 173 03 - Wiring Harness NR.173 - DME - (-1991) M249 (Tiptronic Transmission)
964 612 173 35 - Wiring Harness NR.173 - DME - (1992-) M249 (Tiptronic Transmission)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION

Project Cars Using 964 3.6L Dme Engine Wire Harness Conversion To 911 - 930 - 914 - Chassis

916 PORSCHE | 3.8L DME + HVAC | 915 5-Speed

Cars That Fit

964 1989-1994 3.6L H6 NA 911 Carrera 2/4
1991-1993 3.3L H6 Turbo 965 Turbo
1994 3.6L H6 Turbo 965 Turbo
997 2005-2008 3.6L H6 NA Carrera / GT3
2005-Present 3.6L H6 Turbo GT2
996 1999-2002 3.4L H6 NA Carrera
2001-2004 3.6L H6 Turbo GT2
2002-2004 3.6L H6 NA Carrera / GT3
993 1994-1998 3.6L H6 NA
1996-1998 3.6L H6 Turbo
986 1997-1999 2.5L H6 M96
1997-Present 2.5L-On Boxster Spec Racing
2000-2004 3.2L H6 M96 S
2000-2004 2.7L H6 M96
944 1982-1991
968 1992-1995 3.0L
987 2005-2006 3.2L H6 M96 Boxster / Cayman
2005-Present 2.7L H6 M96 Boxster / Cayman
2007-Present 3.4L H6 M96 Boxster / Cayman
356 1948-1955
1955-1959 A
1959-1963 B
1963-1966 C
914-4 1970-1972 1.7L H4
1973-1976 2.0L H4
1974-1975 1.8L H4
914-6 1970-1972 2.0L H6
930 1978-1989 3.3L H6 Turbo
911 1964-1969 2.0L H6 NA
1970-1971 2.2L H6 NA
1972-1973 2.4L H6 NA
1973-1974 3.0L H6 NA
1973-1974 2.7L H6 NA
1974-1977 2.7L H6 NA
1975-1977 3.0L H6 Turbo
1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera
912 1965-1969 1.6L H4 NA
1965-1969 2.0L H4 NA

Related Parts

Flywheel - 911 / 915 225mm Conversion to 964 & 993 3.6L DME Engines

Flywheel - 911 / 915 225mm Conversion to 964 & 993 3.6L DME Engines

Patrick Motorsports Exclusive
22536DMEFW PMP
9.50 lbs

Flywheel - 225mm - 3.6L DME (964 / 993) Engine Conversion to 915 / 901 (With Adapter) Transmissions - (60-2 tooth Timing Reference) - 9 Bolt Crankshaft - Sport Lightweight Single Mass - Billet Steel 9.50 Lbs (4.31 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing
+ Includes: Certified Rotational Balancing
+ Use with PN: PKG 915 930 G50 SBH ECS - Engine to Transmission Case Mounting Stud Set
+ Use with PN: 964 101 187 01 - Support Bracket for Crankshaft Pulse Sender Reference Sensor
+ Use with PN: 911 606 217 03 SS < 996 606 105 00 - Crankshaft Pulse Sender Reference Sensor

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$425.00
Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Patrick Motorsports Exclusive
24036DMEFW PMP
10 In Stock
9.00 lbs

Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm Clutch - 9 Bolt Crankshaft - (1978-1988) PORSCHE 930 Turbo 3.3L / 930 Trans & G50 SBH Trans - (60-2 Timing Configuration) - Billet Steel, Weight: 9.00 Lbs. (4.09 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing (Low Profile)
+ Includes: Rotational Balancing
+ Replaces PN: 930 102 202 01 - Flywheel (1978-1979) 930 Turbo
+ Replaces PN: 930 102 213 00 - Flywheel (1979-1988) 930 Turbo

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION
$550.00
911 G50 Flywheel Conversion to 964 993 3.6L DME 240mm

911 G50 Flywheel Conversion to 964 993 3.6L DME 240mm

Patrick Motorsports Exclusive
24036DMEFWG50 PMP
32 In Stock
10.25 lbs

Flywheel - 964 & 993 3.6L DME Conversion to (1987-1989) G50-00 & G50-50 Transmissions (240mm) - 9 Bolt Crankshaft - (60-2 Timing Configuration) Steel, Weight: 10.25 Lbs. (4.65 Kg.) - PATRICK MS USA

+ Certified Computer Balanced
+ Use with PN: 964 101 187 PM - Bracket Support for Engine Crankshaft Sensor

We also suggest this unit when using MoTeC or engine management systems with the G50-00 and G50-50 transmissions.

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS G50 CONVERSION
$675.00
Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Patrick Motorsports Exclusive
36 CAM BLOCK PMP
14 In Stock
0.18 lbs

Camshaft Block Off Cover Plate Adapter - (1989-1998) PORSCHE 964 / 993, 3.6L Engines - Installs onto cam carrier housing for power steering delete conversion & LH camshaft cover - Features Low profile for non standard camshafts & exhaust header clearance - Billet Aluminum 6061-T6 Mil-Spec Black Anodized - PATRICK MS USA + 964 use 1 per car / 993 use 1 or 2 per car

+ Includes: 999 707 293 40 - O-Ring 40 x 4

+ Replaces PNs:
964 147 185 02 - PS Drive Bracket
964 147 185 05 - PS Drive Bracket
993 105 117 02 - Camshaft Cover LH Side
993 147 185 02 - PS Drive Bracket

+ Also can be used on 911 / 930 (Air Injection Delete)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$75.00
3.6L Engine Displacement Badge

3.6L Engine Displacement Badge

Patrick Motorsports Exclusive
36L BADGE PMP
22 In Stock

** SUMMER SPECIAL! Was $48.00, you save $9.00 **
Discount for a limited time only.

Engine Displacement Badge Logo Decorative Fitting - (3.6) - Billet Aluminum with black powder coat finish - PATRICK MS USA

+ Includes studs mounting hardware for rear deck lid ventilation grill cover or for cockpit interior installation.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$39.00
911 914 Fuel System Conversion Adapter Set to 964 3.6L

911 914 Fuel System Conversion Adapter Set to 964 3.6L

Patrick Motorsports Exclusive
901 200 964 PMS
4.00 lbs

911 - 914 Fuel System Conversion Set - (1990-1994) 964 (3.6L DME) Engine to 911 & 914 Chassis - Complete set includes all new metric unions, SS clamps, hardware, high pressure EFI fuel line to tank & new fuel filter - Original factory hardware & appearance - COHLINE / MAHLE / PATRICK MS USA

+ Use with PN: 964 620 104 00 - Fuel Pump

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONCohlineMAHLEGENUINE PORSCHE
$150.00
914 Clutch Conversion - 911 225mm Flywheel to 901 Transmission - Street

914 Clutch Conversion - 911 225mm Flywheel to 901 Transmission - Street

Patrick Motorsports Exclusive
901 228 CKS PMS
18.86 lbs

Clutch Conversion Kit - Sport Street - 901 Transmission to 225mm (9 Bolt) Flywheels - Special 228mm Sport HPS II Clutch Pressure Plate (Push Type), Sport Organic Sprung Hub Disc, Starter Ring Gear Adapter Kit & Mounting Hardware - PATRICK MS USA / KEP / SACHS

+ Use with PN: 901 116 081 11 - Clutch Release Bearing

Application Notes:
Fitment for all (1978-1983) 3.0L Engines or engines up to -1998 (3.2L, 3.3L, 3.6L) with 225mm (9 Bolt) conversion flywheels.

 PATRICK MOTORSPORTS USAPATRICK CLUTCHESPMS 914 ENGINE CONVERSIONPMS 915 CONVERSIONKEPSachs
$575.00
Engine Case Stud to (SBH) Transmission Adapter Set - 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing)

Engine Case Stud to (SBH) Transmission Adapter Set - 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing)

Patrick Motorsports Exclusive
901 915 930 G50 SBH PMS
4 In Stock
0.50 lbs

Engine Case Stud to (SBH) Transmission Adapter Set - Use to mount PORSCHE 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing) 4 & 5 Speed Transmissions to (1978-1989) 930 Turbo 3.3L & (1990-On) 3.6L engine cases - 4 Stud Set (M10) - GENUINE PORSCHE

+ Application Notes: - Torque Spec: 45 Nm (33 ftlb)

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION PMS 915 CONVERSIONGENUINE PORSCHE
$40.00
Engine Oil Feed Pipe Adapter - 911 S Hose to 964 3.6L Engines

Engine Oil Feed Pipe Adapter - 911 S Hose to 964 3.6L Engines

Patrick Motorsports Exclusive
911 107 964 OP PMS
1 In Stock
1.00 lbs

964 Engine Oil Feed Pipe Adapter - (1970-1989) 911 / 930 Oil Tank S (Suction) Hose to (1990-1994) 964 3.6L Engine | Threads into case half right side (M24X1.50) - CNC Machined Stainless Steel - PATRICK MS USA
+ Includes M24 Aluminum Sealing Ring

+ Replaces PN: 964 207 257 11 - Oil Pipe
+ Connects to PNs: 911 107 233 00 / 930 107 233 02 - Oil Suction Hose

+ (1994-1998) 993 Applications use PN: OIL 911 107 993 OP PMS - 993 Engine Oil Feed Pipe Adapter

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSION
$145.00
911 Carrera Front Right Oil Cooler Update Kit

911 Carrera Front Right Oil Cooler Update Kit

Patrick Motorsports Exclusive
911 207 OC FRM
10.00 lbs

911 Carrera Front Right Side Mount Oil Cooler Update Kit - (1969-1989) PORSCHE 911 Carrera / Narrow Body Chassis - Updated OEM Cellular / Radiator Style Cooler Assembly with Original Metric 30mm Fittings.

+ Complete Parts Kit: Oil Cooler, mounting kit, oil line set, cover plate & sealing gasket.
+ Replaces PN: 930 207 050 03 - Oil Cooler (NLA)
+ Ideal for use on engine conversions, Turbo, sport and racing cars.

PMS 911 ENGINE CONVERSIONLAENGERER & REICHGENUINE PORSCHE
$950.00
911 - 930 Accelerator Throttle Cable Conversion Kit to 964 / 993 3.6L DME Engines

911 - 930 Accelerator Throttle Cable Conversion Kit to 964 / 993 3.6L DME Engines

Patrick Motorsports Exclusive
911 964 993 TC PMS
2 In Stock
0.50 lbs

911 / 930 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine - (1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines - PATRICK MS USA

+ Includes adjustable Delrin bulk head fitting
+ Includes installation instructions

Application:
(1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines

Designed to replace the original throttle cable assembly PNs:
PCG 423 024 00 – Throttle Linkage
901 423 223 01 – Extension Rod

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONGENUINE PORSCHE
$290.00
914-4 Engine Chassis Adapter Harness - 914 4 to 964 / 993 3.6L Engine

914-4 Engine Chassis Adapter Harness - 914 4 to 964 / 993 3.6L Engine

Patrick Motorsports Exclusive
914 612 CJH 436 PMS
0.80 lbs

CHASSIS JUMPER HARNESS - 3.6L 964 '90-'94 TO 914-4 / REPLACES 914-4 ENGINE CONTROL PANEL AND JUMPERS 3.6L DME ENGINE TO 914-4 CHASSIS HARNESS.

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$180.00
914 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine 964 - 993

914 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine 964 - 993

Patrick Motorsports Exclusive
914 964 993 TC PMS
2 In Stock
0.50 lbs

914 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine - (1970-1976) 914 to (1994-1998) 964 / 993 - 3.6L DME Engines - PATRICK MS USA

+ Includes installation instructions

Application:
(1970-1976) 914 to (1994-1998) 964 / 993 - 3.6L DME Engines

Designed to replace the original 914 throttle cable PNs:
914 423 067 00 – 914-4, 1.7 / 2.0
914 423 067 02 – 914-4, 1.7 / 1.8 / 2.0
914 423 067 03 – 914-4 1.8V
914 423 066 00 – 914-6

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$290.00
911 - 914 - 930 Engine Crank Pulley - 964 (3.6L DME) Engine Conversion with Air Conditioner

Engine Crank Shaft Pulley for 964 (3.6L DME) Engine to 911 / 930 / 914 Chassis with Air Conditioner - Billet Aluminum Mil Spec Black Anodize - PATRICK MS USA + Includes new PORSCHE Hex Head Bolt (Flanged).

* Not to be used for '90-'94 964 3 belt pulley replacement *

+ Replaces PN: 964 102 050 01 - Crankshaft Pulley with Air Conditioner M64.01/02/03
+ For (1990-1994) 964 tapered end crankshafts only - Designed for 964 RS RSR & GT-2 tapered crankshafts in 911 & 914 models ONLY (Must use alternate AC compressor).

** NOT SUITABLE FOR REPLACEMENT ORIGINAL WORN OUT HARMONIC DAMPER **

Specially designed ONLY for use with supplement Part Numbers:
+ 930 115 017 02 - (1984-1989) 911 Carrera 3.2L Motor Console
+ 930 126 015 00 - (1984-1989) 911 Carrera 3.2L AC compressor mounting bracket
+ 930 126 116 02 - (1984-1989) 911 Carrera 3.2L Angle Bracket
+ 964 126 121 01 - (1989-1994) 964 Carrera AC compressor | *Unit allows intake manifold clearance

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$295.00
Engine Crank Pulley - 964 Single Belt Crank RS / RSR Type

Engine Crank Pulley - 964 Single Belt Crank RS / RSR Type

Patrick Motorsports Exclusive
964 102 050 SBC PMS
59 In Stock
0.70 lbs

Engine Crankshaft Pulley - (1990-1994) PORSCHE 911 / 964 Carrera 3.6L DME Engine to (-89) 911 Single Belt 964 3.6L Engine Conversion / RS / RSR - Includes integral conical hub - 6061 T6 Billet Aluminum Alloy, Mil-Spec Black Anodized - PATRICK MS USA

+ Replaces PN: 964 102 050 01 - Engine Crankshaft Pulley (*Vibration Damper) (M64.01/02/03)
+ Specially Designed for PN: 964 102 021 04 - Crankshaft (M64.01/02/03/50) 964 conical tapered end crankshaft
+ Includes - Hexagon Head Bolt
+ Recommended for use with: 10x750 V-Belt & PN: 993 106 051 80 PMS - RS Fan Impeller Wheel Hub

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$240.00
911 930 914 Single Belt Engine Crankshaft Pulley & Fan Drive Set to 964 3.6L Crank Conversion

911 930 914 Single Belt Engine Crankshaft Pulley & Fan Drive Set to 964 3.6L Crank Conversion

Patrick Motorsports Exclusive
964 102 050 SBCF PMS
2.00 lbs

964 Single Belt Engine Crankshaft Pulley & Fan Hub Drive Set - (1965-1989) 911 / 914 Single Belt (No AC) to (1989-1994) PORSCHE 964 Carrera 3.6L DME Engines - Includes integral conical (taper) hub end crank pulley and top side RS Alternator Impeller Fan Hub - 6061 T6 Billet Aluminum Alloy, Mil-Spec Black Anodized - PATRICK MS USA

Set Includes:
1) RS Fan Alternator Drive Hub
1) Crank Pulley
1) Hexagon Head Bolt (Torque Spec: 110 ft/lbs (149 Nm) | Blue Loctite Recommended)
1) Belt 10x750

+ Replaces PN: ENG 964 106 051 30 - Fan Hub with Bearing for Engine Cooling Impeller
+ Replaces PN: 964 102 050 01 - Engine Crankshaft Pulley (*Vibration Damper) (M64.01/02/03)
+ Specially Designed for PN: 964 102 021 04 - Engine Crankshaft (conical tapered end) - (1989-1994) PORSCHE 964 (M64.01/02/03/50)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONContinental
$385.00
Single Feed Hot Air Socket Distributor Manifold On 3.6L Engine Fan Shroud

Single Feed Hot Air Socket Distributor Manifold On 3.6L Engine Fan Shroud

Patrick Motorsports Exclusive
964 105 HFS S250 PMS
0.30 lbs

Hot Air Socket Distributor Manifold - (964 / 993) 3.6L Engine Fan Shroud | Single Heater Feed Adapter to Original Style Heat Exchangers on 911 & 914-6 to 3.6L Engine Conversions - Fabricated Aluminum with Rivets, Black Finish - PATRICK MS USA

+ Installs onto / Replaces Rubber Boot on PNs:
964 106 403 01 SS >> 964 105 403 02
| 993 106 403 00 - Air Duct Cover

+ Use with 3 Feet Hot Air Hose (60mm or 2.50 Inch)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$150.00
Crankshaft Pulse Sender Reference Sensor - 911 / 964 / 993 / 996 / Turbo / GT2 / GT3

Crankshaft Pulse Sender Reference Sensor - (1990-2005) 911 / 964 / 993 / 996 / Turbo / GT2 / GT3 - OEM BOSCH (0 261 210 205) - MSRP: $238.18

+ Replaces PN: 911 606 217 03 SS
+ Note: Models which have the original rectangular plug must be updated. Also use (Qty.) (1) 999 652 916 40 oval plug housing (3) 999 652 871 22 connectors (3) 999 704 161 40 grommets
+ Use with PN: 964 101 187 01 - Support Bracket for Crankshaft Pulse Sender Reference Sensor

Bosch
$120.00
ELE CREADER IV

ELE CREADER IV

ELE CREADER IV
0.80 lbs

DTC READER - DIAGNOSTIC TROUBLE CODE READER - OBD II & E OBD / INCLUDING CAN PROTOCOL *
Features:
1. LCD display
2. Display the content of trouble code
3. FREEZE FRAME function
4. Supporting CANBUS diagnosis
5. Manual reading code and clearing code

Specifications
1. LCD display(128*32), displaying by 2 lines, LED backlight
2. Two keys operation
3. Enclosed a disc, including most manufacturer code information. Now there is more than 7000 manufacturer codes, and it updates continuously.
4. Enclosed users' manual, including the explanation of trouble code before 1000 number.

 PATRICK MOTORSPORTS USA
$98.00
Engine Sheet Metal Set - PORSCHE 914-6 3.6L DME Conversion

Engine Sheet Metal Set - PORSCHE 914-6 3.6L DME Conversion

Patrick Motorsports Exclusive
ENG 9146 SM 36 BPC PMP
5.50 lbs

Engine Sheet Metal Set - Black - PORSCHE 914-6 (Application: H6, 3.6L DME Engines) - High Quality Steel Batch Production Set - Black Powdercoated Finish - PATRICK MS USA

When upgrading and converting the PORSCHE 914-4 to the larger displacement H6 cylinder engines, the original engine sheet metal set will not work and needs to be replaced entirely.
* NO LONGER AVAILABLE *

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$0.00
Support Bracket for Crankshaft Flywheel Pulse Sender Reference Sensor

Support Bracket for Crankshaft Flywheel Pulse Sender Reference Sensor - Crankcase Left, (1990-2005) PORSCHE 964 / 993 / 996 Turbo / GT3 - GENUINE PORSCHE

+ Replaces PN: 964 101 187 01
+ Use with PN: 911 606 217 03 - Pulse Sender

PATRICK FLYWHEELSPATRICK CLUTCHESPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS 915 CONVERSIONGENUINE PORSCHE
$90.00
DUAL HOT AIR HEATER SOCKET BLOCK OFF ON 964 993 3.6L ENGINE FAN SHROUD

DUAL HOT AIR HEATER SOCKET BLOCK OFF ON 964 993 3.6L ENGINE FAN SHROUD

Patrick Motorsports Exclusive
ENG 964 105 HFS BOC PMS
0.30 lbs

Hot Air Socket Block Off Cover - (964 / 993) 3.6L Engine Fan Shroud | Block Off Cover Adapter to 911 & 914-6 Without Heat Exchangers to 3.6L Engine Conversions - Fabricated Aluminum with Rivets, Black Powdercoated Finish - PATRICK MS USA

+ Installs onto / Replaces Rubber Boot on PNs:
964 106 403 01 SS >> 964 105 403 02
| 993 106 403 00 - Air Duct Cover

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$65.00
Oil Pressure Sending Unit 3.2L & 3.6L Engine Conversion - Single Pole

Oil Pressure Sending Unit 3.2L & 3.6L Engine Conversion - Single Pole

Patrick Motorsports Exclusive
ENG36 OIL PS1 PMS
0.50 lbs

Oil Pressure Sending Unit for Gauge - Application to (1965-1977) PORSCHE 911 (with 0-10 Bar Gauge) to 3.2L & 3.6L DME Engine Conversion - Includes Single Pole Type Sender (0-10 Bar | 150 PSI), M18 Adapter Fitting & Seal Ring - VDO SIEMENS / PATRICK MS USA

+ Replaces PNs:
928 606 203 01 SS - Oil Pressure Sender (0-5 Bar) (Superseded to: 928 606 203 04)
911 606 135 00 - Oil Pressure Sender (0-5 Bar)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONVDO
$75.00
Dual Hot Air Heater Socket Distributor Manifold On 964 993 3.6L Engine Fan Shroud

Dual Hot Air Heater Socket Distributor Manifold On 964 993 3.6L Engine Fan Shroud

Patrick Motorsports Exclusive
ENG964.105.HFS.D225.PMS
3 In Stock
0.30 lbs

Hot Air Heater Socket Distributor Manifold - (964 / 993) 3.6L Engine Fan Shroud | Dual Heater Feed Adapter to SSI / Original Style Heat Exchangers on 911 & 914-6 to 3.6L Engine Conversions - Fabricated Steel with Rivets, Black Finish - PATRICK MS USA

+ Installs onto / Replaces Rubber Boot on PNs:
964 106 403 01 SS >> 964 105 403 02
| 993 106 403 00 - Air Duct Cover

+ Use with 2.25 Inch Dia. Aeroduct Heater Hose

Hot Air Socket Block Off Cover - (964 / 993) 3.6L Engine Fan Shroud | Block Off Cover Adapter to 911 & 914-6 Without Heat Exchangers to 3.6L Engine Conversions - Fabricated Aluminum with Rivets, Black Powdercoated Finish - PATRICK MS USA

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$165.00
SSI Exhaust Headers Heat Exchanger - 911 to (1989-1998) PORSCHE 3.6L DME Engine

SSI Exhaust Headers Heat Exchanger - 911 to (1989-1998) PORSCHE 3.6L DME Engine

Patrick Motorsports Exclusive
EXH 91 36 SSI
1 In Stock
38.00 lbs

SSI Exhaust Heat Exchanger Set - 911 to (1989-1998) PORSCHE 3.6L DME Engine - Special 21.5mm Thick Flat Flange - With O2 Sensor Socket - Primary Tubing: (1.50 O.D. / 35mm I.D.) - DANSK / SSI / PATRICK MS USA

+ Requires additional cam Tensioner clearance.
+ Use with PNs:
1) 911 107 739 10 - Oil Line
1) 911 107 729 10 - Oil Line
12) 999 062 239 02 - Exhaust studs

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONDanskSSI
$2,350.00
1 5/8

1 5/8" Exhaust Manifold Headers Heat Exchanger Set

Patrick Motorsports Exclusive
EXH FPOR-0401
1 In Stock
28.00 lbs

911 Exhaust Manifold Heat Exchanger Set - (Early 911 Style Heat Exchanger to Dual Inlet Muffler) - (1969-1989) PORSCHE 911 - Larger Primary: 1-5/8 Inch O.D. (38mm) I.D. - Mandrel Bent Primary Tubes - TIG Welded 304 Stainless Steel Construction - B&B / PATRICK MS USA - *Special Construction
+ Includes manifold to heads & muffler gaskets, hardware, O2 sensor port, installation tool & instructions. * 24.5" PRIMARY TUBE LENGTH

+ Designed for early dual inlet muffler system

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONB&B Fabrication
$2,300.00
911 Exhaust System Package - 3.6L to (1975-1989) PORSCHE 911 SC / Carrera Chassis

911 Exhaust System Package - 3.6L to (1975-1989) PORSCHE 911 SC / Carrera Chassis

Patrick Motorsports Exclusive
EXH FPOR-1400-36
75.00 lbs

Exhaust System Package - 3.6L DME Engine to (1975-1989) PORSCHE 911 / Carrera Chassis - Complete System: 1.750 O.D. Mandrel Bent Primary Heat Exchangers, Dual In Muffler System / Dual Out 3.00 Inch Oval Outlet Tips - O2 Sensor Ports, Oil Line System / Adapters / Gasket & Hardware Set - TIG Fabricated Stainless Steel Construction - B&B / PATRICK MS USA

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONB&B Fabrication
$3,100.00
Fuel Pump 911 - 964 - 993 3.6L

Fuel Pump 911 - 964 - 993 3.6L

FUE 964 620 104 00
2.23 lbs

Fuel Pump - (1989-1998) 911 Carrera 4 / 2 / 3.6L Naturally Aspirated External Pump - (Silver Housing) - OEM BOSCH (0 0580 464 058) - MSRP: $652.53

Bosch
$260.00
911 - 964 Air Intake Kit

911 - 964 Air Intake Kit

INTK964FA
5.00 lbs

Air Intake System - Porsche 964, ABS plastic air box adapter plenum and high flow cotton based cone air filer. EVOMS, MSRP: $225.00

*INCLUDES BREATHER PORT

-Increased airflow for more power ~ 8-10 HP/TQ
-Roto-molded plastic 4” opening air plenum / filter adapter
-Custom EVOMS 4” inlet filter
-Mounting bracket for plenum and vacuum canister included
-100% bolt-on

 PATRICK MOTORSPORTS USA
$210.00

Catalogs

964 ENGINE CONVERSION WIRE HARNESS 914 & 911

Browse 1 Service Parts
Patrick Motorsports Exclusive

ENGINE CONVERSION HARNESS - PORSCHE 911 / 914 CHASSIS INTERFACE TO 3.6L (964) '90-'94 ENGINE CONTROL UNIT - FEATURES NEW ORIGINAL EQUIPMENT CONNECTIONS, FUEL PUMP RELAY AND CHECK ENGINE LIGHT WIRE. NO NEED TO SPEND ALL THE TIME TO REWIRE YOUR SELF, WE HAVE DONE THAT FOR YOU.

-PATRICK MOTORSPORTS EXCLUSIVE-

*ALSO INCLUDES MODEL SPECIFIC CHASSIS JUMPER HARNESS FOR PORSCHE 914 APPLICATIONS
PMP36ENGHAR9094


Customer Testimonials

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!