SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

930 Clutch Adapter Set - For 1978-1988 Porsche 930 Turbo 4-Speed

930 Clutch Adapter Set - For 1978-1988 PORSCHE 930 Turbo 4-Speed
PART # 930 116 LWC PMS
2.60 LBs
$350.00

Patrick Motorsports Exclusive

930 Lightweight Clutch Adapter Set - (1978-1988) PORSCHE 930 Turbo 4-Speed to (1976-1977) Porsche 911 Turbo Carrera, earlier, "low profile" pressure plate covers. Designed to replace the original ~25 Lbs. clutch pressure plate. Two part set includes machined billet stainless steel release bearing adapter & aluminum starter ring gear adapter. Lightweight, optimized, Top Motorsport Quality designed to last the lifetime of the vehicle. Total kit weight: 2.60 Lbs. (1.18 Kg) - PATRICK MS USA

+ Use with PNs:
1) 930 116 081 11 - Clutch Release Bearing
9) 900 074 136 03 - Pressure Plate Bolt

If you are looking for more quicker response and less boost lag from your Porsche 930 turbo then this is the kit for you! These adapter parts are specially designed for use with the lightweight, low profile clutch pressure plate covers to reduce mass. The starter ring gear adapter extension simply stacks on top of the early original 911 Turbo Carrera clutch pressure plate and provides the proper starter ring gear offset. Then the clutch release bearing adapter extension simply snaps into and replaces the original release bearing ears. All original hardware is used.

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPATRICK CLUTCHES

Project Cars Using 930 Clutch Adapter Set - For 1978-1988 Porsche 930 Turbo 4-Speed

1987 930 Turbo 3.4L Twin Plug Ignition

Cars That Fit

930 1978-1989 3.3L H6 Turbo

Related Parts

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Patrick Motorsports Exclusive
24036DMEFW PMP
10 In Stock
9.00 lbs

Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm Clutch - 9 Bolt Crankshaft - (1978-1988) PORSCHE 930 Turbo 3.3L / 930 Trans & G50 SBH Trans - (60-2 Timing Configuration) - Billet Steel, Weight: 9.00 Lbs. (4.09 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing (Low Profile)
+ Includes: Rotational Balancing
+ Replaces PN: 930 102 202 01 - Flywheel (1978-1979) 930 Turbo
+ Replaces PN: 930 102 213 00 - Flywheel (1979-1988) 930 Turbo

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION
$550.00
930 / 934 / 935 / 962 Flywheel Lightweight RSR - 240MM

930 / 934 / 935 / 962 Flywheel Lightweight RSR - 240MM

Patrick Motorsports Exclusive
2409LWFW PMP
7.00 lbs

Flywheel - 240mm RSR Lightweight - 930 / 934 / 935 / 962 - 9 Bolt - Scalloped without timing reference - Billet Steel - 7.0 Lbs. (3.17 Kg.) - PATRICK MS USA

+ Computer Balanced
+ Replaces factory flywheel PN: 930 102 213 00 - Flywheel (1979-1988) Porsche 911 / 930 Turbo (10.60 Lbs.)
+ For 930 & G50 Short Bell Housing Transmission conversions, use with PN: 930 102 042 PMS - Pilot Bearing - 50mm Low Profile

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS G50 CONVERSION
$465.00
930 Flywheel & Clutch Set -  Lightweight 240mm RSR / Centerforce

930 Flywheel & Clutch Set - Lightweight 240mm RSR / Centerforce

Patrick Motorsports Exclusive
930 102 LWF CFS PMS
1 In Stock
27.00 lbs

Flywheel & Clutch Package - (1978-1988) PORSCHE 930 Turbo - (240mm / 930 4 Speed Transmission) - Sport Street / Track Lightweight High Performance System - CENTERFORCE / SACHS / GENUINE PORSCHE / MODE / PATRICK MS USA

+ Reduces rotating mass +13 Lbs.
+ Holding capacity rated at ~580 ft lbs tq.

This is the ultimate flywheel and clutch system for the Porsche 930 Turbo street or racing car. You can expect a smooth and easy pedal effort and increased responsiveness from the engine. The Centerforce clutch are extremely durable. Suitable for street or sport autocross racing.

Detail component list:
1 PMS Lightweight billet steel RSR type flywheel
1 Centerforce DF255255 lightweight high clamp load pressure plate and spring hub disc
1 Pilot bearing
1 Starter ring gear extension
1 Release bearing extension adapter
1 Release bearing
9 flywheel bolts
9 Pressure plate bolts

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPATRICK CLUTCHESCenterforce - The Performance ClutchMODE - Motorsport DesignGENUINE PORSCHESachs
$2,400.00
Starter Ring Gear - 911 Turbo Carrera 930 4 Spd / G50 SBH

Starter Ring Gear - 911 Turbo Carrera 930 4 Spd / G50 SBH

Patrick Motorsports Exclusive
930 116 230 00 PMP
1 In Stock
2.00 lbs

Starter Ring Gear - (1976-1977) PORSCHE 911 Turbo Carrera / 3.0L - Mounts on top of the 240mm Clutch Cover - OE Supplier Germany - MSRP: $261.52

+ Note: 3x Pressure plate limit pin clearance holes
+ Also used with PATRICK MS G50 Short Bell Housing Conversions

PMS G50 CONVERSION GENUINE
$245.00
911 Turbo / 930 Sport Clutch Set - (1975-1977) PORSCHE 911 Turbo 3.0L / 930 4 Speed - Short Stage 1

911 Turbo / 930 Sport Clutch Set - (1975-1977) PORSCHE 911 Turbo 3.0L / 930 4 Speed - Short Stage 1

Patrick Motorsports Exclusive
930 116 KEP LWS S1 PMS
2 In Stock
13.48 lbs

911 Turbo / 930 Sport Clutch Set - (1975-1977) PORSCHE 911 Turbo 3.0L / 930 4 Speed (Short / Low Profile Bell Housing) - SACHS / KEP / PATRICK MS USA

Set Includes:
+ Sachs Clutch Friction Disc - Spring Hub / Organic Lining
+ Clutch Pressure Plate - (240 mm) HD Sport Stage 1 - (1975-1977) PORSCHE 911 Turbo 3.0L / 930 4 Speed (Short / Low Profile Bell Housing) - Lightweight Forged Aluminum Cover / Iron friction plate - HD Triple drive straps and rivets - 9.50 Lbs. (4.30 Kg.) - KEP

+ Capacity rated at 550 FT/TQ
+ For use on (1978-1988) 930 Turbo, use with Low Profile Starter Ring Gear & Release Bearing Adapters.

 PATRICK MOTORSPORTS USAPATRICK CLUTCHESKEPSachs
$1,150.00
911 TURBO / 930 SPORT CLUTCH SET - (1975-1977) PORSCHE 911 TURBO 3.0L / 930 4 SPEED - RUF SHORT

911 TURBO / 930 SPORT CLUTCH SET - (1975-1977) PORSCHE 911 TURBO 3.0L / 930 4 SPEED - RUF SHORT

Patrick Motorsports Exclusive
930 116 LWS R5 PMS
2 In Stock
15.39 lbs

911 Turbo / 930 Sport Clutch Set - (1975-1977) PORSCHE 911 Turbo 3.0L / 930 4 Speed (Short / Low Profile Bell Housing) - SACHS RE PERFORMANCE / PATRICK MS USA

Set Includes:
+ Clutch Friction Disc - (1976-1988) PORSCHE 930 240mm High Performance "Sport" Spring Hub w/ Organic Lining (Higher Friction) 4.19 Lbs. (1.90 Kg.) - SACHS PERFORMANCE
+ Clutch Pressure Plate - 240mm High Performance - 930 RUF 5-Speed Type, "Low profile" as found on (1976-1977) PORSCHE 930 Transaxles - Lightweight Alloy Cover 11.20 Lbs.

+ Capacity rated at ~650 ft lbs tq
+ For use on (1978-1988) 930 Turbo, use with Low Profile Starter Ring Gear & Release Bearing Adapters.

 PATRICK MOTORSPORTS USAPATRICK CLUTCHESSachsZF SACHS PERFORMANCE
$1,875.00
Clutch Friction Disc - 240mm Racing - Sintered Ceramic 6 Pad Button - Spring Torsion Hub

Clutch Friction Disc - 240mm Racing - Sintered Ceramic 6 Pad Button - Spring Torsion Hub

Patrick Motorsports Exclusive
930 116 SPH 615 PMP
10 In Stock
3.00 lbs

Clutch Friction Disc - 240mm Racing - Sintered Metallic 6 Pad Button - Spring Torsion Hub - PORSCHE 930 & G50 Transmissions - PATRICK MS USA

+ Can be used in place of SACHS RE PN: 88 1861 999 615

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPATRICK CLUTCHESPMS G50 CONVERSION
$350.00
Clutch Release Bearing - (1976-1988) PORSCHE 911 Turbo Carrera 3.0L / 930 Turbo 3.3L

Clutch Release Bearing - (1975-1988) PORSCHE 911 Turbo Carrera 3.0L / 930 Turbo 3.3L - (Only for 930 4 Speed Type Transmission) - SACHS (3151 019 231) - MSRP: $215.38

+ Replaces PN: 930 116 081 00 - Clutch Release Bearing (1975-1977) 911 Turbo Carrera

Sachs
$185.00
Flywheel Clutch Starter Ring Gear 930 Turbo 4 Speed

Flywheel Clutch Starter Ring Gear 930 Turbo 4 Speed

CLU 930 116 230 02 GEN
1 In Stock
1.95 lbs

Starter Ring Gear - (1978-1988) 911 / 930 Turbo / 930 4 Speed - 240mm - 7.70 mm Thickness - OE Supplier Germany - MSRP: $332.91

GENUINE
$282.50
Centerforce Clutch Set - PORSCHE 930 Turbo / 3.3L / 930 4 Speed Transmission - 240mm

Centerforce Clutch Set - PORSCHE 930 Turbo / 3.3L / 930 4 Speed Transmission - 240mm

Patrick Motorsports Exclusive
CLU DF252252
1 In Stock
27.50 lbs

Clutch Set - Sport (1978-1988) PORSCHE 930 Turbo / 3.3L / 930 4 Speed Transmission - Matched High Clamp Load Iron Pressure Plate (24.81 Lbs. / 11.25 Kg) & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA - MSRP: $2040.95

+ Precision Balanced
+ Includes Clutch Alignment Tool
+ Use with PN: 930 116 081 11 - Clutch Release Bearing

PATRICK CLUTCHESCenterforce - The Performance ClutchSachs
$1,250.00
911 Turbo Carrera 930 Clutch Set - Centerforce Clutch Kit - G50 SBH

911 Turbo Carrera 930 Clutch Set - Centerforce Clutch Kit - G50 SBH

Patrick Motorsports Exclusive
CLU DF255255
1 In Stock
15.00 lbs

Clutch Set - 240mm Sport Lightweight (1976-1977) PORSCHE 911 Turbo Carrera / 930 4-Speed Transmission "Short, Low Profile" - Matched High Clamp Load Aluminum Pressure Plate & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA

+ High Clamp Load | Torque Capacity rated at 580 ft/lbs. Light Pedal Effort
+ Also used with lightweight options for (1978-1988) 930 Turbo with adapter or with G50 Short Bell Housing Transaxle Conversions
+ Replaces PN: 930 116 021 00 - Clutch Pressure Plate
+ Replaces PN: 930 116 014 02 - Clutch Disc Spring Torsion Hub

PATRICK CLUTCHESPMS G50 CONVERSION Centerforce - The Performance ClutchSachs
$1,400.00
Electric Starter - 901 / 915 / 930 / G50 Transaxles & VW / Porsche Type I

Electric Starter - 901 / 915 / 930 / G50 Transaxles & VW / Porsche Type I

Patrick Motorsports Exclusive
ELE 911 604 101 N HTS
5 In Stock
8.80 lbs

Electric High Torque Starter - PORSCHE (1965-1989) 914 / 911 - 901 / 915 / 930 / G50 Transaxles & VW / Porsche Type I Bell Housing - High Torque Gear Reduction - 9 Tooth Pinion Gear - CCW Rotation - 1.4 kW 12V - Rotatable Index - 4.44 to 1 Gearing - Genuine Nippon Denso starter motor / Aluminum Adapters - Compact Light weight (< 9 Lbs) - IMI-101N Batch Production - PATRICK MS USA

 PATRICK MOTORSPORTS USA
$285.00
911 930 Turbo Clutch Pressure Plate Bolt

911 930 Turbo Clutch Pressure Plate Bolt

HAR 900 074 136 03 OEM
21 In Stock
9.00 lbs

Bolt - Flywheel Ring Gear to Clutch Pressure Plate - (1978-1988) PORSCHE 911 / 930 Turbo / 930 4-Speed Transmission - (8 X 80 mm) - Hex Head - 9 Per Car - GENUINE PORSCHE - MSRP: $1.98

+ Torque Spec: 25 Nm (18 ft lb)

Original Equipment Supplier
$1.50

Customer Testimonials

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!