SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

914 Engine Mount For 914-6 Cylinder 2.0 - 3.8l Engine Conversions - Bolt In Type

914 Engine Mount for 914-6 Cylinder 2.0 - 3.8L Engine Conversions - Bolt In Type
PART # 914 375 BIM PMS
13.50 LBs
$450.00

Patrick Motorsports Exclusive

914 6 Engine Conversion Mount - (1970-1976) PORSCHE 914-4 to 2.0 - 3.6L H6 Engines - (Bolt In) Bulk Head Cross Bracket Mount to Engine Support Carrier - Includes Urethane Isolation Bushings for Street & Track Use - 3D Optimized Design allows for pivoting engine for direct installation - TIG Welded Steel Fabrication - Black Powdercoat Finish - PATRICK MS USA

+ Fully compatible with original / aftermarket exhaust heat exchangers, brake pressure regulator and original electrical wiring harness.

+ Replaces PNs:
901 115 012 00 - Engine Carrier Bracket
914 375 049 00 - Engine Mounting
914 375 057 00 - Base Upper
914 375 158 00 - Base Lower

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION

Project Cars Using 914 Engine Mount For 914-6 Cylinder 2.0 - 3.8L Engine Conversions - Bolt In Type

914 6 GT Replica Race Car Conversion | 3.2L DME | 915 Trans

Cars That Fit

914-4 1970-1972 1.7L H4
1973-1976 2.0L H4
1974-1975 1.8L H4
914-6 1970-1972 2.0L H6

Related Parts

914 Clutch Conversion - 911 225mm Flywheel to 901 Transmission - Street

914 Clutch Conversion - 911 225mm Flywheel to 901 Transmission - Street

Patrick Motorsports Exclusive
901 228 CKS PMS
18.86 lbs

Clutch Conversion Kit - Sport Street - 901 Transmission to 225mm (9 Bolt) Flywheels - Special 228mm Sport HPS II Clutch Pressure Plate (Push Type), Sport Organic Sprung Hub Disc, Starter Ring Gear Adapter Kit & Mounting Hardware - PATRICK MS USA / KEP / SACHS

+ Use with PN: 901 116 081 11 - Clutch Release Bearing

Application Notes:
Fitment for all (1978-1983) 3.0L Engines or engines up to -1998 (3.2L, 3.3L, 3.6L) with 225mm (9 Bolt) conversion flywheels.

 PATRICK MOTORSPORTS USAPATRICK CLUTCHESPMS 914 ENGINE CONVERSIONPMS 915 CONVERSIONKEPSachs
$575.00
914 Rear TRAILING ARM Box Reinforcement Set

914 Rear TRAILING ARM Box Reinforcement Set

Patrick Motorsports Exclusive
914 331 050 R PMS
20 In Stock
4.00 lbs

914 Rear Axle Control Arm Box Reinforcement Set - Welds onto Rear Left / Right Suspension Trailing Arms - Repairs corrosion, increasing rigidity and strength on street and racing cars - 2 Piece Set of 12G Punched Steel - PATRICK MS USA

Specially designed to install onto PNs:
914 331 057 03 - Rear Axle Control Arm With Bearing - Left
914 331 058 03 - Rear Axle Control Arm With Bearing - Right

 PATRICK MOTORSPORTS USA
$85.00
Adjustable Tow Link Set - (1970-1974) PORSCHE 914 / 914-6 Rear Axle Suspension

Adjustable Tow Link Set - (1970-1974) PORSCHE 914 / 914-6 Rear Axle Suspension

Patrick Motorsports Exclusive
914 331 052 RTK PMS
5.50 lbs

Adjustable Tow Link Set - (1970-1974) PORSCHE 914 / 914-6 Rear Axle Suspension - Includes fully adjustable spherical uniball bearings and hardware with prefabricated & finished carrier brackets. Also includes weld on blocks for application to rocker area. GENUINE PORSCHE / PATRICK MS USA

+ Includes & Replaces PNs: 914 331 051 01 & 914 331 052 01 - Rear Axle Link Bearing Left / Right

This set is specially designed to inhibit deflection causing poor suspension geometry and tow misalignment on street and racing cars. Installation of this kit improves control & handling for increased suspension performance. This also simplifies and locks in tow adjustment saving you time!

 PATRICK MOTORSPORTS USAGENUINE PORSCHE
$340.00
914 Rear Trailing Control Arm Set

914 Rear Trailing Control Arm Set

Patrick Motorsports Exclusive
914 331 RTA PMS
38.00 lbs

914 Rear Control Trailing Arm Set - Sport / Race - Modified with PMS Boxed Reinforcement Kit, Tie Down D-Loops & New PMS Delrin Bushing Set - Fully cleaned and reconditioned with polished pivot shaft. - Black Powder Coated and CAD plated bearing housing retainer plates. PATRICK MS USA

+ Price Includes: CORE Exchange Assembly PN: 914 331 RCA SET CORE = $200.00
+ Also Recommend PN: PMP914RTOEKIT - 914 Adjustable Rear Toe Link Set
+ Also use 2 Qty. PN: 999 053 035 00 - Wheel Ball Bearing - 2 Row Type

DON’T TRUST YOU OLD STOCK FACTORY CONTROL ARM TO HANDLE THE ADDED HORSE POWER OF YOUR ENGINE CONVERSION. THEY WEAKEN, AND RUST OUT FROM THE INSIDE AS THEY TRAP MOISTURE WHEN THE DRAIN PASSAGES ARE PLUGGED WITH DIRT & DEBRIS.

* WE ALSO OFFER 5 BOLT/LUG REAR WHEEL HUBS PART # DRI 911 311 065 33 FOR YOUR WHEEL AND TIRE SWAP.

 PATRICK MOTORSPORTS USAGENUINE PORSCHE
$880.00
914 Rear Solid Transmission Mount Set

914 Rear Solid Transmission Mount Set

Patrick Motorsports Exclusive
914 375 025 00 PMS
10 In Stock
0.85 lbs

Solid Transmission Mount Set - (1970-1976) PORSCHE 914 / 901 Transmission Suspension - Billet Aluminum & Delrin - Utilizes original mounting hardware - (1 Left / Right Set Per Car) - PATRICK MS USA

+ Replaces 2) PNs: 914 375 025 00 & 914 375 026 00 - Transmission Mounting

 PATRICK MOTORSPORTS USA
$98.00
914 Engine Mount for 914-6 Cyl 2.0 - 3.8L Engine Conversions - Weld In Type

914 Engine Mount for 914-6 Cyl 2.0 - 3.8L Engine Conversions - Weld In Type

Patrick Motorsports Exclusive
914 375 WIM PMS
10 In Stock
13.50 lbs

914 6 Engine Conversion Mount - (1970-1976) PORSCHE 914-4 to 2.0 - 3.6L H6 Engines - (Weld In) Bulk Head Cross Bracket Mount to Engine Support Carrier - Includes Urethane Isolation Bushings for Street & Track Use - 3D Optimized Design allows for pivoting engine for direct installation - TIG Welded Steel Fabrication - Black Powdercoat Finish (Bulk head support brackets raw steel finish for welding application) - PATRICK MS USA

+ Fully compatible with original / aftermarket exhaust heat exchangers, brake pressure regulator and original electrical wiring harness.

+ Replaces PNs:
901 115 012 00 - Engine Carrier Bracket
914 375 049 00 - Engine Mounting
914 375 057 00 - Base Upper
914 375 158 00 - Base Lower

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$460.00
914 Chassis Reinforcement Stiffening Kit

914 Chassis Reinforcement Stiffening Kit

Patrick Motorsports Exclusive
BOD 914 CRK PMP
24 In Stock
12.00 lbs

914 Chassis Reinforcement Stiffening Kit for Key Rear Axle Suspension Body Wheel Housing Paneling - (1970-1976) PORSCHE 914-4 / 914-6 - Application increases structural rigidity for increased handling performance. - Includes: 8 piece set Left / Right of specially shaped 16 gauge steel pieces for TIG or HELIARC welding installation - PATRICK MS USA

+ Recommend to use with PN: PMP914TABOX - 914 Rear Trailing Arm Suspension Box Set

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$160.00
Engine Sheet Metal Set - PORSCHE 914-6 3.6L DME Conversion

Engine Sheet Metal Set - PORSCHE 914-6 3.6L DME Conversion

Patrick Motorsports Exclusive
ENG 9146 SM 36 BPC PMP
5.50 lbs

Engine Sheet Metal Set - Black - PORSCHE 914-6 (Application: H6, 3.6L DME Engines) - High Quality Steel Batch Production Set - Black Powdercoated Finish - PATRICK MS USA

When upgrading and converting the PORSCHE 914-4 to the larger displacement H6 cylinder engines, the original engine sheet metal set will not work and needs to be replaced entirely.
* NO LONGER AVAILABLE *

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$0.00
Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Black

Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Black

Patrick Motorsports Exclusive
ENG 9146 SM BPC PMP
5.50 lbs

Engine Sheet Metal Set - (Black) - PORSCHE 914-6 (Application: H6, 2.0 - 3.0L Engines) - High Quality Steel Batch Reproduction Set - Black Powdercoated Finish - PATRICK MS USA

+ Note: 3.2L with DME & 3.6L DME Engines Fitting & Trim Modifications Required

When upgrading and converting the PORSCHE 914-4 to the larger displacement H6 cylinder engines, the original engine sheet metal set will not work and needs to be replaced entirely.
* NO LONGER AVAILABLE *

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$0.00
Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Raw

Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Raw

Patrick Motorsports Exclusive
ENG 9146 SM PMS
5.50 lbs

Engine Sheet Metal Set - Raw - PORSCHE 914-6 (Application: H6, 2.0 - 3.6L Engines) - High Quality Steel Batch Reproduction Set - Raw Steel Finish - PATRICK MS USA

+ Note: 3.2L with DME & 3.6L DME Engines Fitting & Trim Modifications Required
+ For (2.0-3.0L H6 Engines) use our pre finished and powdercoated set.

When upgrading and converting the PORSCHE 914-4 to the larger displacement H6 cylinder engines, the original engine sheet metal set will not work and needs to be replaced entirely.
* NO LONGER AVAILABLE *

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$0.00
Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.625 In.

Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.625 In.

Patrick Motorsports Exclusive
EXH FPOR-0500
38.00 lbs

Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.625 In. (41.28mm) O.D. Primary / (38mm I.D.) - Mandrel Bent 304 Stainless Steel - TIG Welded - Polished Finish - B&B / PATRICK MS USA - MSRP: $2310.00

+ Includes Rear muffler gasket and hardware set.

Replaces PNs:
901 211 003 00 - Exhaust Heat Exchanger - Left - Cylinder 4-6
901 211 004 00 - Exhaust Heat Exchanger - Right - Cylinder 1-3

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONB&B Fabrication
$2,250.00
Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.750 In.

Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.750 In.

Patrick Motorsports Exclusive
EXH FPOR-0510
1 In Stock
38.00 lbs

Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.750 In. (44.45mm) O.D. Primary / (41.28mm I.D.) - Mandrel Bent 304 Stainless Steel - TIG Welded - Polished Finish - B&B / PATRICK MS USA - MSRP: $2310.00

+ Includes Rear muffler gasket and hardware set.

Replaces PNs:
901 211 003 00 - Exhaust Heat Exchanger - Left - Cylinder 4-6
901 211 004 00 - Exhaust Heat Exchanger - Right - Cylinder 1-3

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONB&B Fabrication
$2,250.00
915 Transmission Support Mount Carrier Adapter to (1970-1976) PORSCHE 914 Chassis

915 Transmission Support Mount Carrier Adapter to (1970-1976) PORSCHE 914 Chassis

Patrick Motorsports Exclusive
TRA 914 301 031 915 PMS
2 In Stock
5.00 lbs

915 Transmission Support Mount Carrier Adapter to (1970-1976) PORSCHE 914 Chassis - Attaches to 915 Transmission Nose Cone Cover - Fabricated Tube Design - Black Powder Coated - PATRICK MS USA

+ Use with PN: PMP915CS - Cable Shifter System for 915 Transmissions

Replaces / Emulates PNs: 914 301 031 02 / 914 301 031 03 / 914 301 032 00 - Transmission 901 Nose Cone Cover

Attaches to PNs: 915 301 903 01 - 915 Transmission Cover Nose Cone & 911 375 033 01 - Transmission Carrier Mount

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$380.00

Customer Testimonials

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!