SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

911 - 930 Accelerator Throttle Cable Conversion Kit To 964 / 993 3.6l Dme Engines

911 - 930 Accelerator Throttle Cable Conversion Kit to 964 / 993 3.6L DME Engines
PART # 911 964 993 TC PMS
0.50 LBs
$290.00

Patrick Motorsports Exclusive

911 / 930 Accelerator Throttle Cable Conversion Kit to 3.6L DME Engine - (1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines - PATRICK MS USA

+ Includes adjustable Delrin bulk head fitting
+ Includes installation instructions

Application:
(1965-1989) 911 / 930 / Turbo to (1994-1998) 964 / 993 - 3.6L DME Engines

Designed to replace the original throttle cable assembly PNs:
PCG 423 024 00 – Throttle Linkage
901 423 223 01 – Extension Rod

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONGENUINE PORSCHE

Project Cars Using 911 - 930 Accelerator Throttle Cable Conversion Kit To 964 / 993 3.6L Dme Engines

911 ST LONG HOOD CONVERSION | 3.8L V-RAM | G50 SBH1975 911 RSR 3.8L Complete Build1980 911 SC to RS 3.8L Backdate1973 911 RSR | 3.8L Twin Turbo | 6 Speed911 RSR IROC Street Racer | 3.8L DME | Euro 9151973 911 T to RSR Retro Creation 3.6L V-Ram G50 gearbox1973 911 to RS Right Hand Drive | 3.6L V-Ram | G50 SBH911 SC | 3.6L DME V-Ram Engine Conversion911 RS - 3.6L DME / G50 SBH (1972)1973 911 RS Pro Touring | 993 3.6L DME | G50 SBH1976 911 Turbo Carrera | 95 3.6L DME Conversion1974 911 RSR Clone | 3.6L DME | HVAC | 915 Transmission

Cars That Fit

964 1989-1994 3.6L H6 NA 911 Carrera 2/4
1991-1993 3.3L H6 Turbo 965 Turbo
1994 3.6L H6 Turbo 965 Turbo
997 2005-2008 3.6L H6 NA Carrera / GT3
2005-Present 3.6L H6 Turbo GT2
996 1999-2002 3.4L H6 NA Carrera
2001-2004 3.6L H6 Turbo GT2
2002-2004 3.6L H6 NA Carrera / GT3
993 1994-1998 3.6L H6 NA
1996-1998 3.6L H6 Turbo
986 1997-1999 2.5L H6 M96
1997-Present 2.5L-On Boxster Spec Racing
2000-2004 3.2L H6 M96 S
2000-2004 2.7L H6 M96
944 1982-1991
968 1992-1995 3.0L
987 2005-2006 3.2L H6 M96 Boxster / Cayman
2005-Present 2.7L H6 M96 Boxster / Cayman
2007-Present 3.4L H6 M96 Boxster / Cayman
356 1948-1955
1955-1959 A
1959-1963 B
1963-1966 C
914-4 1970-1972 1.7L H4
1973-1976 2.0L H4
1974-1975 1.8L H4
914-6 1970-1972 2.0L H6
930 1978-1989 3.3L H6 Turbo
911 1964-1969 2.0L H6 NA
1970-1971 2.2L H6 NA
1972-1973 2.4L H6 NA
1973-1974 3.0L H6 NA
1973-1974 2.7L H6 NA
1974-1977 2.7L H6 NA
1975-1977 3.0L H6 Turbo
1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera
912 1965-1969 1.6L H4 NA
1965-1969 2.0L H4 NA

Related Parts

Flywheel - 911 / 915 225mm Conversion to 964 & 993 3.6L DME Engines

Flywheel - 911 / 915 225mm Conversion to 964 & 993 3.6L DME Engines

Patrick Motorsports Exclusive
22536DMEFW PMP
9.50 lbs

Flywheel - 225mm - 3.6L DME (964 / 993) Engine Conversion to 915 / 901 (With Adapter) Transmissions - (60-2 tooth Timing Reference) - 9 Bolt Crankshaft - Sport Lightweight Single Mass - Billet Steel 9.50 Lbs (4.31 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing
+ Includes: Certified Rotational Balancing
+ Use with PN: PKG 915 930 G50 SBH ECS - Engine to Transmission Case Mounting Stud Set
+ Use with PN: 964 101 187 01 - Support Bracket for Crankshaft Pulse Sender Reference Sensor
+ Use with PN: 911 606 217 03 SS < 996 606 105 00 - Crankshaft Pulse Sender Reference Sensor

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$425.00
Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Patrick Motorsports Exclusive
24036DMEFW PMP
10 In Stock
9.00 lbs

Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm Clutch - 9 Bolt Crankshaft - (1978-1988) PORSCHE 930 Turbo 3.3L / 930 Trans & G50 SBH Trans - (60-2 Timing Configuration) - Billet Steel, Weight: 9.00 Lbs. (4.09 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing (Low Profile)
+ Includes: Rotational Balancing
+ Replaces PN: 930 102 202 01 - Flywheel (1978-1979) 930 Turbo
+ Replaces PN: 930 102 213 00 - Flywheel (1979-1988) 930 Turbo

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION
$550.00
911 G50 Flywheel Conversion to 964 993 3.6L DME 240mm

911 G50 Flywheel Conversion to 964 993 3.6L DME 240mm

Patrick Motorsports Exclusive
24036DMEFWG50 PMP
32 In Stock
10.25 lbs

Flywheel - 964 & 993 3.6L DME Conversion to (1987-1989) G50-00 & G50-50 Transmissions (240mm) - 9 Bolt Crankshaft - (60-2 Timing Configuration) Steel, Weight: 10.25 Lbs. (4.65 Kg.) - PATRICK MS USA

+ Certified Computer Balanced
+ Use with PN: 964 101 187 PM - Bracket Support for Engine Crankshaft Sensor

We also suggest this unit when using MoTeC or engine management systems with the G50-00 and G50-50 transmissions.

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS G50 CONVERSION
$675.00
Air Intake Filter Conversion Kit 914 6 to 993 3.6L

Air Intake Filter Conversion Kit 914 6 to 993 3.6L

Patrick Motorsports Exclusive
914 993 IBK PMS
0.50 lbs

Air intake conversion kit - Porsche 914 6 chassis to 993 3.6l (1995) engine - includes formed intake boot, Delrin plug port set, Delrin maf sensor adaptor tube, adapter hose and hardware kit. Our intake kits will top off your conversion for that factory installed look. They have been tested and designed for this application to maximize air flow and increase horsepower.

+ For use with cone filter kit: K&N RU-3130 (sold separately)

Always use our exclusive products when completing your engine conversions! They will save you time and money over trying to make one for your application. Our extensive research and development results in proprietary solutions with OEM quality fit and finish.

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONGENUINE PORSCHE
$145.00
964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

Patrick Motorsports Exclusive
964 612 173 DME PMS
9 In Stock
1.50 lbs

964 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 Chassis to (1990-1994) PORSCHE 964 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

Interfaces PNs:
964 612 173 02 - Wiring Harness NR.173 - DME - (1989) M481 (Manual Transmission)
964 612 173 04 - Wiring Harness NR.173 - DME - (1990-) M481 (Manual Transmission)
964 612 173 03 - Wiring Harness NR.173 - DME - (-1991) M249 (Tiptronic Transmission)
964 612 173 35 - Wiring Harness NR.173 - DME - (1992-) M249 (Tiptronic Transmission)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$385.00
Ignition Coil Mount Adapter (Dual) - 993 Carrera 3.6L DME Engines

Ignition Coil Mount Adapter (Dual) - 993 Carrera 3.6L DME Engines

Patrick Motorsports Exclusive
993 602 CAM PMP
10 In Stock
2.00 lbs

Ignition Coil Mount Adapter (Dual) - (1994-1998) PORSCHE 993 Carrera 3.6L DME Engines to 911 / 930 / 914 Engine Conversions - Mounts to Left Side Fan Housing - Black Wrinkle Powdercoated - PATRICK MS USA

+ Use with PN: 993 602 071 01 - Ignition Coil Set (Dual)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$120.00
Oil Pressure Sending Unit 3.2L & 3.6L Engine Conversion - Single Pole

Oil Pressure Sending Unit 3.2L & 3.6L Engine Conversion - Single Pole

Patrick Motorsports Exclusive
ENG36 OIL PS1 PMS
0.50 lbs

Oil Pressure Sending Unit for Gauge - Application to (1965-1977) PORSCHE 911 (with 0-10 Bar Gauge) to 3.2L & 3.6L DME Engine Conversion - Includes Single Pole Type Sender (0-10 Bar | 150 PSI), M18 Adapter Fitting & Seal Ring - VDO SIEMENS / PATRICK MS USA

+ Replaces PNs:
928 606 203 01 SS - Oil Pressure Sender (0-5 Bar) (Superseded to: 928 606 203 04)
911 606 135 00 - Oil Pressure Sender (0-5 Bar)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONVDO
$75.00
Fire Sleeve - AN-04 / 1/4

Fire Sleeve - AN-04 / 1/4" ID (6MM ID) - Black Silicone over knitted fiberglass

Patrick Motorsports Exclusive
HARFS15580-04-A0
1.00 lbs

Fire Sleeve - AN-04 / 1/4" ID (6MM ID) - Black Silicone over knitted fiberglass - Per Foot (12 Inch) Unit - Made In USA

 PATRICK MOTORSPORTS USA
$4.50
911 - 964 Air Intake Kit

911 - 964 Air Intake Kit

INTK964FA
5.00 lbs

Air Intake System - Porsche 964, ABS plastic air box adapter plenum and high flow cotton based cone air filer. EVOMS, MSRP: $225.00

*INCLUDES BREATHER PORT

-Increased airflow for more power ~ 8-10 HP/TQ
-Roto-molded plastic 4” opening air plenum / filter adapter
-Custom EVOMS 4” inlet filter
-Mounting bracket for plenum and vacuum canister included
-100% bolt-on

 PATRICK MOTORSPORTS USA
$210.00

Customer Testimonials

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.