SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

911 930 935 Rsr Lightweight Front Control Arm & Cross Member Suspension Set

911 930 935 RSR Lightweight Front Control Arm & Cross Member Suspension Set
PART # 911 341 935 FR
16.00 LBs
$1850.00

Patrick Motorsports Exclusive

RSR Lightweight Front Control Arm & Cross Member Suspension Set - (1969-1989) PORSCHE 935 RSR / 911 / 930 Turbo / 914 - Allows fully adjustable camber, caster and wheel base - Fabricated, Nickel Plated 4130 Alloy Arms / Anodized Billet Aluminum - Precision PTFE spherical bearings - High Strength Hardware - ERP / PATRICK MS USA

 PATRICK MOTORSPORTS USA

Project Cars Using 911 930 935 Rsr Lightweight Front Control Arm & Cross Member Suspension Set

1974 911 IROC | 3.8L Slide Valve DME MoTeC | R50-50 6-Speed1975 911 RSR 3.8L Complete Build1980 911 SC to RS 3.8L Backdate1973 911 RSR | 3.8L Twin Turbo | 6 SpeedPORSCHE 935 | 3.8L TWIN TURBO914-6 Super GT Racecar | 993 3.6L V-Ram | G501974 911 RSR Clone | 3.6L DME | HVAC | 915 Transmission

Cars That Fit

930 1978-1989 3.3L H6 Turbo
911 1964-1969 2.0L H6 NA
1970-1971 2.2L H6 NA
1972-1973 2.4L H6 NA
1973-1974 2.7L H6 NA
1973-1974 3.0L H6 NA
1974-1977 2.7L H6 NA
1975-1977 3.0L H6 Turbo
1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera

Related Parts

Rear Trailing Arm Monoball Bearing Set 911 / 912 / 930

Rear Trailing Arm Monoball Bearing Set 911 / 912 / 930

Patrick Motorsports Exclusive
901 331 059 00 KT
0.28 lbs

Rear Axle Suspension Trailing Arm Monoball Spherical Bearing Cartridge Bushing Set Left / Right - (1965-1989) 911 / 930 Turbo / 912 - PATRICK MS USA

+ Set Replaces 4 Qty. PN: 901 331 059 00 - Rear Axle Flange Mounting / Rubber Bushing

The uniball (solid / spherical bearing type) cartridge is installed into the inner end of the trailing control arms after first removing the worn original rubber flange mount bushings. The set installed effectively sharpens response with load reversals by allowing the pivot to move freely. This reduces toe change for better stability and control during cornering and under hard braking. Recommended for motorsport use only.

 PATRICK MOTORSPORTS USA
$250.00
911 - 912 Front Lower Control Arm Bearing Bushing Set

911 - 912 Front Lower Control Arm Bearing Bushing Set

Patrick Motorsports Exclusive
901 341 005 PMS
1 In Stock
1.00 lbs

Front Lower Control Arm Bearing Bushing Set - Early - (1965-1969) PORSCHE 911 / 912 - Sport / Motorsport Semi-Solid Type - Machined Delrin® - PATRICK MS USA

+ 4 Piece Set / 1 Set Per Car
+ Installs onto PNs: 901 341 005 00 / 901 342 006 00 - Control Arm L/R
+ Extremely durable, self lubricating with Teflon® & will not squeak.

PORSCHE did not offer replacement bushings for the front lower control arms but instead they offered entire replacement arms inclusive of newer rubber bushings. These parts are specially developed to replace the original equipment rubber with a hard plastic material known as Delrin® while re-using the original control arms.

 PATRICK MOTORSPORTS USA
$110.00
Front Tow Hook Loop - Porsche 911 / 914

Front Tow Hook Loop - Porsche 911 / 914

Patrick Motorsports Exclusive
901 341 911 914 FTH PMP
13 In Stock
1.00 lbs

Front Tow Hook Loop - Porsche 911 / 914 - 2 point mounting to front lower control arm bearing bracket - Red Powder Coated Steel - PATRICK MS USA

+ NOTE: Please check application for clearance of front valance.

 PATRICK MOTORSPORTS USA
$65.00
911 / 930 Turbo Rear Spring Plate Set - 935 RSR Adjustable Suspension

911 / 930 Turbo Rear Spring Plate Set - 935 RSR Adjustable Suspension

Patrick Motorsports Exclusive
911 331 935 R 01
2 In Stock
20.00 lbs

Rear Spring Plate Set - 935 RSR - (1965-1989) PORSCHE 911 / 930 Turbo - Adjustable Toe with Uniball / Spherical Bearings & 25mm Raised Pivot Point Option - Complete Left / Right Set - ERP / PATRICK MS USA

 PATRICK MOTORSPORTS USA
$950.00
911 - 914 - 930 Front Lower Control Arm Bearing Bushing Set

911 - 914 - 930 Front Lower Control Arm Bearing Bushing Set

Patrick Motorsports Exclusive
911 341 901 PMS
26 In Stock
1.00 lbs

Front Lower Control Arm Bearing Bushing Set - Late - (1969-1989) PORSCHE 911 / 914 / 930 - Sport / Motorsport Semi-Solid Type - Machined Delrin® - PATRICK MS USA

+ 4 Piece Set / 1 Set Per Car & Includes Installation Instructions
+ Installs onto PNs: 911 341 901 00 / 911 341 902 00 / 930 341 901 00 / 930 341 902 00 - Control Arm L/R
+ Extremely durable, self lubricating with Teflon® & will not squeak.

PORSCHE did not offer replacement bushings for the front lower control arms but instead they offered entire replacement arms inclusive of newer rubber bushings. These parts are specially developed to replace the original equipment rubber with a hard plastic material known as Delrin® while re-using the original control arms.

 PATRICK MOTORSPORTS USA
$110.00
Front Strut Brace - Suspension - PORSCHE 911 / 912 / 930 / Turbo

Front Strut Brace - Suspension - PORSCHE 911 / 912 / 930 / Turbo

Patrick Motorsports Exclusive
911 341 FSB
3.50 lbs

Front Strut Brace - Spans the stock towers - PORSCHE 911 / 912 / 930 / Turbo - Lightweight polished aluminum tube with steel zinc plated adjustable tension ends - PATRICK MS USA

This is must have for any early chassis looking to increase rigidity for better handling performance.

 PATRICK MOTORSPORTS USA
$210.00
 911 - 914 - 930 Turbo Front Strut Supporting Mount Set Camber Plate - 911 RSR

911 - 914 - 930 Turbo Front Strut Supporting Mount Set Camber Plate - 911 RSR

Patrick Motorsports Exclusive
911 343 002 KT
3.00 lbs

Front Strut Supporting Mount Set - RSR Solid with Spherical Mono-Ball Bearing Cartridges - Adjustable Mounting Positions with -1 Deg. Camber Offset - PORSCHE 911 / 914 / Turbo (-1989) - Mil-Spec Black Anodized Billet Aluminum - Left / Right Set - PATRICK MS USA

+ NOTES: Includes damper mounting bushing hardware set.
+ Use with stock struts require PN: 999 343 012 K1
+ Recommended to inhibit coil spring binding PN: 999 343 006 K1 - Spring Seat Bearing Set

 PATRICK MOTORSPORTS USAMODE - Motorsport Design
$490.00
Quick Ratio Steering Rack Assembly 911 912 914 930

Quick Ratio Steering Rack Assembly 911 912 914 930

Patrick Motorsports Exclusive
914 347 010 06 QS PMS
8.00 lbs

Close Ratio Steering Rack Assembly - PORSCHE 914 / 911 / 912 / 930 / Turbo - Quickens Ratio 2.50 Lock to Lock - Pre assembly with QUAIFE PN: 40.435.001 - Ring & Pinon Set - Precision machined housing and ring and pinion set-up - Direct replacement pre-built unit by PATRICK MS USA
+ CORE CHARGE $ 300.00

 PATRICK MOTORSPORTS USAGENUINE PORSCHEQuaife
$1,325.00
Anti-Bump Steer Tie Rod End Set - 914 / 911 / 930 Turbo

Anti-Bump Steer Tie Rod End Set - 914 / 911 / 930 Turbo

Patrick Motorsports Exclusive
930 347 322 PMS
3 In Stock
2.50 lbs

Anti-Bump Steer Tie Rod End Set - Front Axle Steering - All -1989 PORSCHE 914 / 911 / 930 Turbo - Street / Racing - Includes: Rod end with spherical bearings, protection boots & hardware - PATRICK MS USA

+ Replaces 2) PN: 930 347 322 00 - Tie Rod End

Application Notes:
The anti bump steer kit works by correcting the severe angle of the tie rod end after lowering of these cars. If the anti bump kit is not installed and the car is lowered, upon compression the tie rods can pull the steering out of alignment which is called "bump steer". The racing struts also feature and update to correct this by raising the spindle position. Also most 911s benefit from replacing the tie rods with the turbo edition as well which is a direct replacement kit. So in short, if you plan to lower your car, this would be a kit for you.

 PATRICK MOTORSPORTS USA
$380.00
911 930 935 Coilover Spring Hardware Set - Front Left & Right Suspension

Coilover Spring Hardware Set - BOTH Front Left & Right Suspension - (1972-1989) PORSCHE 911 / 930 Turbo / 934 / 935 - For 2.25mm I.D. Springs Adjustable Spring Perch / Hat for Motorsport Threaded Body Dampers Only - Billet Aluminum Mil Spec Black Anodized - MODE / PATRICK MS USA

 PATRICK MOTORSPORTS USAMODE - Motorsport Design
$150.00
Spring Perch Seat Bearing Set 2.25 Inch Springs

Spring Perch Seat Bearing Set 2.25 Inch Springs

Patrick Motorsports Exclusive
999 343 006 K1 PMS
5 In Stock
0.30 lbs

Suspension Spring Seat Perch Bearing Set - (2.25 Inch) Springs - Installed on the Lower Spring Perch to Eliminate Binding / Clunking - PATRICK MS USA

+ Only for 2.25 Inch Springs

 PATRICK MOTORSPORTS USA
$80.00
911 914 Steering Quick Ratio Rack & Pinion Kit  2.5 Turns Lock to Lock

Steering Quick Ratio Rack & Pinion Kit 2.5 Turns Lock to Lock - (-1989) PORSCHE 911 / 914 - LHD & RHD - Set to Upgrade Original Steering Rack - QUAIFE (QSF3Q001)

+ Use with PN: 914 347 010 06 - Steering Gear
+ Note installation will require machine operations.

Quaife
$435.00
911 / 930 TORSION BAR SET - (21MM) FRONT AXLE SUSPENSION

911 / 930 TORSION BAR SET - (21MM) FRONT AXLE SUSPENSION

SUS 901 343 100 21 SWA
3 In Stock
25.00 lbs

Torsion Bar Set - (21mm) Front Axle Suspension - (1965-1989) PORSCHE 911 / (1975-1989) PORSCHE 911 Turbo Carrera / 930 - Tubular Aircraft Alloy Steel / Heat Treated / Powder Coated - SWAY-A-WAY USA (Left / Right Set)

+ Replaces PNs:
901 343 101 12 / 901 343 102 12 - Torsion Bar Left / Right - (19mm)

SWAY-A-WAY
$385.00
Threaded Pin - Front Axle Strut (Strut to Ball Joint) - 911 / 912 / 914 / 930 Turbo

Threaded Pin - Front Axle Strut (Strut to Ball Joint) - 911 / 912 / 914 / 930 Turbo - OE Supplier Germany - MSRP: $26.45

+ Also use PN: 999 084 019 02 - Locking Nut

Original Equipment Supplier
$20.00
Front Sway Bar System - 911 912 914 930

Anti-Sway Bar Stabilizer System - Front Axle Suspension - PORSCHE 912 / 914 / 911 / 930 - 22 MM Hollow Lightweight - 4130 Chromoly Heat Treated - TARRETT

+INCLUDES: ADJUSTABLE 6061-T6 ALUMINUM BEARING BLOCKS, DROP LINKS AND ARMS WITH ZINC PLATED STEEL HARDWARE

Application Note: (1974-1989) PORSCHE 911 / 930 MODELS ALSO USE: DROP LINK U-BRACKET & NUT PLATE ADAPTER SET

TARETT ENGINEERING
$475.00

Customer Testimonials

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.