SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

911 - 914 - 930 Engine Crank Pulley - 964 (3.6l Dme) Engine Conversion With Air Conditioner

911 - 914 - 930 Engine Crank Pulley - 964 (3.6L DME) Engine Conversion with Air Conditioner
PART # 964 102 050 AC PMS
1.50 LBs
$295.00

Patrick Motorsports Exclusive

Engine Crank Shaft Pulley for 964 (3.6L DME) Engine to 911 / 930 / 914 Chassis with Air Conditioner - Billet Aluminum Mil Spec Black Anodize - PATRICK MS USA + Includes new PORSCHE Hex Head Bolt (Flanged).

* Not to be used for '90-'94 964 3 belt pulley replacement *

+ Replaces PN: 964 102 050 01 - Crankshaft Pulley with Air Conditioner M64.01/02/03
+ For (1990-1994) 964 tapered end crankshafts only - Designed for 964 RS RSR & GT-2 tapered crankshafts in 911 & 914 models ONLY (Must use alternate AC compressor).

** NOT SUITABLE FOR REPLACEMENT ORIGINAL WORN OUT HARMONIC DAMPER **

Specially designed ONLY for use with supplement Part Numbers:
+ 930 115 017 02 - (1984-1989) 911 Carrera 3.2L Motor Console
+ 930 126 015 00 - (1984-1989) 911 Carrera 3.2L AC compressor mounting bracket
+ 930 126 116 02 - (1984-1989) 911 Carrera 3.2L Angle Bracket
+ 964 126 121 01 - (1989-1994) 964 Carrera AC compressor | *Unit allows intake manifold clearance

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION

Project Cars Using 911 - 914 - 930 Engine Crank Pulley - 964 (3.6L Dme) Engine Conversion With Air Conditioner

916 PORSCHE | 3.8L DME + HVAC | 915 5-Speed 914 6 GT 3.8L DME / 915 914 6 - 3.6L DME | 915 Tranmission - 1995 993 RSR Speedster | 3.8L MoTeC ITB | 6 Speed

Cars That Fit

964 1989-1994 3.6L H6 NA 911 Carrera 2/4
1991-1993 3.3L H6 Turbo 965 Turbo
1994 3.6L H6 Turbo 965 Turbo
997 2005-2008 3.6L H6 NA Carrera / GT3
2005-Present 3.6L H6 Turbo GT2
996 1999-2002 3.4L H6 NA Carrera
2001-2004 3.6L H6 Turbo GT2
2002-2004 3.6L H6 NA Carrera / GT3
993 1994-1998 3.6L H6 NA
1996-1998 3.6L H6 Turbo
986 1997-1999 2.5L H6 M96
1997-Present 2.5L-On Boxster Spec Racing
2000-2004 3.2L H6 M96 S
2000-2004 2.7L H6 M96
944 1982-1991
968 1992-1995 3.0L
987 2005-2006 3.2L H6 M96 Boxster / Cayman
2005-Present 2.7L H6 M96 Boxster / Cayman
2007-Present 3.4L H6 M96 Boxster / Cayman
356 1948-1955
1955-1959 A
1959-1963 B
1963-1966 C
914-4 1970-1972 1.7L H4
1973-1976 2.0L H4
1974-1975 1.8L H4
914-6 1970-1972 2.0L H6
930 1978-1989 3.3L H6 Turbo
911 1964-1969 2.0L H6 NA
1970-1971 2.2L H6 NA
1972-1973 2.4L H6 NA
1973-1974 3.0L H6 NA
1973-1974 2.7L H6 NA
1974-1977 2.7L H6 NA
1975-1977 3.0L H6 Turbo
1978-1983 3.0L SC
1984-1989 3.2L H6 NA 911 Carrera
912 1965-1969 1.6L H4 NA
1965-1969 2.0L H4 NA

Related Parts

Engine Crank Pulley - 964 Single Belt Crank RS / RSR Type

Engine Crank Pulley - 964 Single Belt Crank RS / RSR Type

Patrick Motorsports Exclusive
964 102 050 SBC PMS
59 In Stock
0.70 lbs

Engine Crankshaft Pulley - (1990-1994) PORSCHE 911 / 964 Carrera 3.6L DME Engine to (-89) 911 Single Belt 964 3.6L Engine Conversion / RS / RSR - Includes integral conical hub - 6061 T6 Billet Aluminum Alloy, Mil-Spec Black Anodized - PATRICK MS USA

+ Replaces PN: 964 102 050 01 - Engine Crankshaft Pulley (*Vibration Damper) (M64.01/02/03)
+ Specially Designed for PN: 964 102 021 04 - Crankshaft (M64.01/02/03/50) 964 conical tapered end crankshaft
+ Includes - Hexagon Head Bolt
+ Recommended for use with: 10x750 V-Belt & PN: 993 106 051 80 PMS - RS Fan Impeller Wheel Hub

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$240.00
911 - 930 - 914 Single Belt Engine Crankshaft Pulley & Fan Drive Set to 964 3.6L Engine Crank Conversion

964 Single Belt Engine Crankshaft Pulley & Fan Hub Drive Set - (1965-1989) 911 / 914 Single Belt (No AC) to (1989-1994) PORSCHE 964 Carrera 3.6L DME Engines - Includes integral conical (taper) hub end crank pulley and top side RS Alternator Impeller Fan Hub - 6061 T6 Billet Aluminum Alloy, Mil-Spec Black Anodized - PATRICK MS USA

Set Includes:
1) RS Fan Alternator Drive Hub
1) Crank Pulley
1) Hexagon Head Bolt (Torque Spec: 110 ft/lbs (149 Nm) | Blue Loctite Recommended)
1) Belt 10x750

+ Replaces PN: ENG 964 106 051 30 - Fan Hub with Bearing for Engine Cooling Impeller
+ Replaces PN: 964 102 050 01 - Engine Crankshaft Pulley (*Vibration Damper) (M64.01/02/03)
+ Specially Designed for PN: 964 102 021 04 - Engine Crankshaft (conical tapered end) - (1989-1994) PORSCHE 964 (M64.01/02/03/50)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONContinental
$385.00
964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

Patrick Motorsports Exclusive
964 612 173 DME PMS
9 In Stock
1.50 lbs

964 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 Chassis to (1990-1994) PORSCHE 964 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

Interfaces PNs:
964 612 173 02 - Wiring Harness NR.173 - DME - (1989) M481 (Manual Transmission)
964 612 173 04 - Wiring Harness NR.173 - DME - (1990-) M481 (Manual Transmission)
964 612 173 03 - Wiring Harness NR.173 - DME - (-1991) M249 (Tiptronic Transmission)
964 612 173 35 - Wiring Harness NR.173 - DME - (1992-) M249 (Tiptronic Transmission)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$385.00
964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive

964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive

Patrick Motorsports Exclusive
993 106 051 80 PMS
10 In Stock
0.50 lbs

964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive - Converts To Single Belt Drive - Ideal for Sport / Motorsport / Engine Conversions - Updated Reproduction of the Original Porsche Motorsport / Euro RS Unit - CAD Designed Lightweight Optimized - 6061-T6 Billet Aluminum Alloy - Mil Spec. Black Anodized - (PMP36FANHUB) - PATRICK MS USA

+ Made for use with original or stud conversion hardware.
+ Replacement for PN: 964 106 051 30 - Original Fan Hub With Bearing
+ Reproduction of 911 Carrera RS Part Number: 993 106 051 80 – Wheel Hub for Engine Code: M64.20

 PATRICK MOTORSPORTS USA
$140.00
AC Compressor - 964

AC Compressor - 964

BOD 964 126 121 01 DEN
13.69 lbs

A/C Compressor with Clutch & Switch Port - OEM DENSO (471-1129) - MSRP: $1527.94 + Also Includes 3x new seals
+ CORE: Not Required - Direct Replacement

+ Use with 3.6L Engine conversions to 911 / 914

Denso
$315.00
Support Bracket for Crankshaft Flywheel Pulse Sender Reference Sensor

Support Bracket for Crankshaft Flywheel Pulse Sender Reference Sensor - Crankcase Left, (1990-2005) PORSCHE 964 / 993 / 996 Turbo / GT3 - GENUINE PORSCHE

+ Replaces PN: 964 101 187 01
+ Use with PN: 911 606 217 03 - Pulse Sender

PATRICK FLYWHEELSPATRICK CLUTCHESPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS 915 CONVERSIONGENUINE PORSCHE
$90.00
Engine V Belt 10x750 - Crankshaft Pulley to Fan Alternator Drive Hub

V-Belt - 10 x 750 - CONTITECH
+ For use with PM 3.6L Engine Crank Pulley Kits

Continental
$10.00

Customer Testimonials

Jeffri

Porsche Enthusiast

They are very professional; quick respond to all questions and emails, very clear communication, and excellent to work with very quick turnaround. I plan to refer others to them. Thanks!

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.