SEARCH
0 In Cart
Home
Parts
Brands
Services
Projects
Car Sales
Packages
Catalogs
Events
Testimonial
Contact
4114 E Washington St
Phoenix, AZ 85034
602-244-0911
Privacy
Terms

Engine Conversion 3.6L > Porsche 914 Chassis

packages / engine conversion 3.6l > porsche 914 chassis

Engine Conversion 3.6L > Porsche 914 Chassis

The Porsche 3.6L DME engine is an excellent choice when converting your 914. These 3.6L engines are found in the 964 from ’90-’94 ( 250hp – 228 lb/ft ), and 993 from ’95-’98 ( 272hp – 243.2 lb/ft ). We often find the early 2.0L, 2.2L, 2.4L, 2.7L, 3.0L and 3.2L engines are “tired” and with the increasing parts costs and rebuild labor expenses, this begins to approach that of the 3.6L engines. These engines offer several advantages with regards to reliability, power and future service. The DME (Digital Motor Electronics) used to operate the engines ensures excellent hot or cold running with increase efficiency and lower emissions output. These engines are equipped standard with twin plug ignition systems & knock sensing. We have all of the conversion parts you should need to simply install these and other engines into your chassis. Please contact us today for your needs, should it be individual parts, a complete engine package, or bringing your car to us for a complete 3.6L engine conversion !

Engine Conversion 3.6L > Porsche 914 Chassis Parts

Flywheel - 911 / 915 225mm Conversion to 964 & 993 3.6L DME Engines

Flywheel - 911 / 915 225mm Conversion to 964 & 993 3.6L DME Engines

Patrick Motorsports Exclusive
22536DMEFW PMP
9.50 lbs

Flywheel - 225mm - 3.6L DME (964 / 993) Engine Conversion to 915 / 901 (With Adapter) Transmissions - (60-2 tooth Timing Reference) - 9 Bolt Crankshaft - Sport Lightweight Single Mass - Billet Steel 9.50 Lbs (4.31 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing
+ Includes: Certified Rotational Balancing
+ Use with PN: PKG 915 930 G50 SBH ECS - Engine to Transmission Case Mounting Stud Set
+ Use with PN: 964 101 187 01 - Support Bracket for Crankshaft Pulse Sender Reference Sensor
+ Use with PN: 911 606 217 03 SS < 996 606 105 00 - Crankshaft Pulse Sender Reference Sensor

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$425.00
Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Flywheel - 911 930 Sport Lightweight 3.6L DME / G50 SBH Conversion - 240mm

Patrick Motorsports Exclusive
24036DMEFW PMP
10 In Stock
9.00 lbs

Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm Clutch - 9 Bolt Crankshaft - (1978-1988) PORSCHE 930 Turbo 3.3L / 930 Trans & G50 SBH Trans - (60-2 Timing Configuration) - Billet Steel, Weight: 9.00 Lbs. (4.09 Kg.) - GENUINE PATRICK MS USA

+ Includes: Sealed Pilot Bearing (Low Profile)
+ Includes: Rotational Balancing
+ Replaces PN: 930 102 202 01 - Flywheel (1978-1979) 930 Turbo
+ Replaces PN: 930 102 213 00 - Flywheel (1979-1988) 930 Turbo

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION
$550.00
911 G50 Flywheel Conversion to 964 993 3.6L DME 240mm

911 G50 Flywheel Conversion to 964 993 3.6L DME 240mm

Patrick Motorsports Exclusive
24036DMEFWG50 PMP
32 In Stock
10.25 lbs

Flywheel - 964 & 993 3.6L DME Conversion to (1987-1989) G50-00 & G50-50 Transmissions (240mm) - 9 Bolt Crankshaft - (60-2 Timing Configuration) Steel, Weight: 10.25 Lbs. (4.65 Kg.) - PATRICK MS USA

+ Certified Computer Balanced
+ Use with PN: 964 101 187 PM - Bracket Support for Engine Crankshaft Sensor

We also suggest this unit when using MoTeC or engine management systems with the G50-00 and G50-50 transmissions.

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS G50 CONVERSION
$675.00
Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Camshaft Block Off Cover Plate 964 - 993 Cam Housing

Patrick Motorsports Exclusive
36 CAM BLOCK PMP
14 In Stock
0.18 lbs

Camshaft Block Off Cover Plate Adapter - (1989-1998) PORSCHE 964 / 993, 3.6L Engines - Installs onto cam carrier housing for power steering delete conversion & LH camshaft cover - Features Low profile for non standard camshafts & exhaust header clearance - Billet Aluminum 6061-T6 Mil-Spec Black Anodized - PATRICK MS USA + 964 use 1 per car / 993 use 1 or 2 per car

+ Includes: 999 707 293 40 - O-Ring 40 x 4

+ Replaces PNs:
964 147 185 02 - PS Drive Bracket
964 147 185 05 - PS Drive Bracket
993 105 117 02 - Camshaft Cover LH Side
993 147 185 02 - PS Drive Bracket

+ Also can be used on 911 / 930 (Air Injection Delete)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$75.00
914 6 Engine Oil Tank Line Set - Original to PMS Oil Tank

914 6 Engine Oil Tank Line Set - Original to PMS Oil Tank

Patrick Motorsports Exclusive
901 107 710 00 PMS
3.70 lbs

914 6 Engine Oil Tank Line Set - 3 piece OE reproduction set with PATRICK MS original style 30MM oil tank fittings - COHLINE / PATRICK MS USA

+ Only for use with PN: 901 107 005 40 PMP - Oil Tank Body Shell Assembly (M22 Feed / Return Ports)
Package Includes PNs:

Set Includes:
1) 901 107 710 04 - Oil Return Line to Tank
1) 901 107 821 00 - Oil Feed Line #19
1) 901 107 823 03 - Oil Feed Line #19/1
1) M22 to M30 Adapter Union
1) M22 to M26 Adapter Union

Application Notes: This set is includes metric oil line adapter unions for PATRICK MS 914 Dry Sump Conversion Oil Tanks with M22 female ports. The original 914-6 oil tank feature M30 & M26 male fittings (Non removable). If you need replacement line sets for the original 914-6, select individual lines only.

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$285.00
914 6 Engine Oil Pressure Return Pipe 30mm to AN-12

914 6 Engine Oil Pressure Return Pipe 30mm to AN-12

Patrick Motorsports Exclusive
901 107 820 02 PMP
3 In Stock
0.50 lbs

Oil Pressure Return Pipe - PORSCHE 914 6 - Engine Lubrication System - Conversion to AN-12 Male Hose End - Steel CAD plated with 30mm Female to engine case - PATRICK MS EXCLUSIVE

+ Replaces PN: 901 107 820 02 - Oil Pressure Pipe (NLA: No Longer Available)

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$160.00
Remote Oil Filter Console Mount Set - AN-12

Remote Oil Filter Console Mount Set - AN-12

Patrick Motorsports Exclusive
901 107 ROC PMS
2 In Stock
3.50 lbs

Remote Oil Filter & Console Mount Set - Includes modular mounting bracket, fittings & filter kit - Billet Aluminum, Black Finish - SETRAB / WIX RACING / SETRAB / PATRICK MS USA

+ Includes 2) PN: 22-M22AN12-SE - Adapter fitting - M22 to AN-12 Male
+ Includes 1) PN: 51060R - WIX Racing Filter

+ Please note: This part does not fit AN-16 fittings (Too Large)
+ Also Available with AN-08 & AN-10 fittings

 PATRICK MOTORSPORTS USASetrabWIX
$135.00
Engine Oil Thermostat Set - AN-12 Universal - 180 F (82.22 C)

Engine Oil Thermostat Set - AN-12 Universal - 180 F (82.22 C)

Patrick Motorsports Exclusive
901 107 T180 AN12 PMS
0.50 lbs

Oil Thermostat Set | AN-12 Universal | 180 F (82 C) By-Pass Type Operation - (4x H Pattern Male) - Includes Modular Mounting Support Bracket - SETRAB / PATRICK MS USA

Replaces PN: 930 107 017 00

 PATRICK MOTORSPORTS USASetrab
$185.00
911 914 Fuel System Conversion Adapter Set to 964 3.6L

911 914 Fuel System Conversion Adapter Set to 964 3.6L

Patrick Motorsports Exclusive
901 200 964 PMS
4.00 lbs

911 - 914 Fuel System Conversion Set - (1990-1994) 964 (3.6L DME) Engine to 911 & 914 Chassis - Complete set includes all new metric unions, SS clamps, hardware, high pressure EFI fuel line to tank & new fuel filter - Original factory hardware & appearance - COHLINE / MAHLE / PATRICK MS USA

+ Use with PN: 964 620 104 00 - Fuel Pump

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONCohlineMAHLEGENUINE PORSCHE
$150.00
911 914 FUEL SYSTEM CONVERSION ADAPTER SET TO 993 3.6L

911 914 FUEL SYSTEM CONVERSION ADAPTER SET TO 993 3.6L

Patrick Motorsports Exclusive
901 200 993 PMS
4.00 lbs

911 - 914 Fuel System Conversion Set - (1994-1998) 993 (3.6L DME) Engine to 911 & 914 Chassis - Complete set includes all new metric unions, SS clamps, hardware, high pressure EFI fuel line to tank & new fuel filter - Original factory hardware & appearance - COHLINE / MAHLE / PATRICK MS USA

+ Use with PN: 964 620 104 00 - Fuel Pump

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONCohlineMAHLEGENUINE PORSCHE
$150.00
Front Center Mount Oil Cooler - 911 RS - 914 GT

Front Center Mount Oil Cooler - 911 RS - 914 GT

Patrick Motorsports Exclusive
901 207 GT FOC PMP
25 In Stock
8.00 lbs

* ON SALE WHILE SUPPLIES LAST! - reg. $ 485.00 less 15% OFF! 6.23.17

Front Center Mount Oil Cooler - 911 RS / 914-6 GT Competition Dual Pass - 2x) AN-12 Feed / Return on same side | Cooling Area: 17.75 (450.85) x 4.25 (107.95) x 1.90 (48.26) | O.A.L. 21.50 (546.10) In (mm) - Epoxy Black Finish - Includes mounting tabs - SETRAB / PATRICK MS USA EXCLUSIVE

*New Design* allows for interchangeable fittings, sized to your particular application.
Includes (2) 22MM AN-12 fittings.
Can be used with 22MM AN-6, AN-8, AN-10, etc.

+ Specially Designed Production - Manufactured by Setrab of Sweden

 PATRICK MOTORSPORTS USASetrab
$412.25
914 Clutch Conversion - 911 225mm Flywheel to 901 Transmission - Street

914 Clutch Conversion - 911 225mm Flywheel to 901 Transmission - Street

Patrick Motorsports Exclusive
901 228 CKS PMS
18.86 lbs

Clutch Conversion Kit - Sport Street - 901 Transmission to 225mm (9 Bolt) Flywheels - Special 228mm Sport HPS II Clutch Pressure Plate (Push Type), Sport Organic Sprung Hub Disc, Starter Ring Gear Adapter Kit & Mounting Hardware - PATRICK MS USA / KEP / SACHS

+ Use with PN: 901 116 081 11 - Clutch Release Bearing

Application Notes:
Fitment for all (1978-1983) 3.0L Engines or engines up to -1998 (3.2L, 3.3L, 3.6L) with 225mm (9 Bolt) conversion flywheels.

 PATRICK MOTORSPORTS USAPATRICK CLUTCHESPMS 914 ENGINE CONVERSIONPMS 915 CONVERSIONKEPSachs
$575.00
Engine Case Stud to (SBH) Transmission Adapter Set - 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing)

Engine Case Stud to (SBH) Transmission Adapter Set - 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing)

Patrick Motorsports Exclusive
901 915 930 G50 SBH PMS
4 In Stock
0.50 lbs

Engine Case Stud to (SBH) Transmission Adapter Set - Use to mount PORSCHE 901 / 915 / G50 SBH / 930 SBH (Short Bell Housing) 4 & 5 Speed Transmissions to (1978-1989) 930 Turbo 3.3L & (1990-On) 3.6L engine cases - 4 Stud Set (M10) - GENUINE PORSCHE

+ Application Notes: - Torque Spec: 45 Nm (33 ftlb)

 PATRICK MOTORSPORTS USAPATRICK FLYWHEELSPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONPMS G50 CONVERSION PMS 915 CONVERSIONGENUINE PORSCHE
$40.00
914-6 GT (M491) Front Center Mount Oil Cooler & Shroud Set

914-6 GT (M491) Front Center Mount Oil Cooler & Shroud Set

Patrick Motorsports Exclusive
914 207 M491 PMS
15.00 lbs

914-6 GT (M491) Front Center Mount Oil Cooler & Shroud Set - (1970-1976) PORSCHE 914 - SETRAB / PATRICK MS USA
Set Includes:
1) Front Center Mount Oil Cooler
1) 914-6 GT Oil Cooler Shroud Kit
1) Louvered Lower Vent Belly Pan

+ Use with: Engine Oil Thermostat & Line Set *Please contact us for parts outline options

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONSetrab
$885.00
Adjustable Toe Link Set - (1970-1974) PORSCHE 914 / 914-6 Rear Axle Suspension

Adjustable Toe Link Set - (1970-1974) PORSCHE 914 / 914-6 Rear Axle Suspension

Patrick Motorsports Exclusive
914 331 052 RTK PMS
5.50 lbs

Adjustable Toe Link Set - (1970-1974) PORSCHE 914 / 914-6 Rear Axle Suspension - Includes fully adjustable spherical uniball bearings and hardware with prefabricated & finished carrier brackets. Also includes weld on blocks for application to rocker area. GENUINE PORSCHE / PATRICK MS USA

+ Includes & Replaces PNs: 914 331 051 01 & 914 331 052 01 - Rear Axle Link Bearing Left / Right

This set is specially designed to inhibit deflection causing poor suspension geometry and tow misalignment on street and racing cars. Installation of this kit improves control & handling for increased suspension performance. This also simplifies and locks in toe adjustment saving you time!

 PATRICK MOTORSPORTS USAGENUINE PORSCHE
$340.00
914 Rear Carrera Axle Drive Shaft & 5 Stud Wheel Flange Conversion Set

914 Rear Carrera Axle Drive Shaft & 5 Stud Wheel Flange Conversion Set

Patrick Motorsports Exclusive
914 332 901 911 PMS
2 In Stock
46.00 lbs

914 Rear Carrera Axle Drive Shaft & 5 Stud Wheel Flange Conversion Set - (1970-1976) PORSCHE 914 / 901 Transmission - Complete set Rear Left / Right - Updates to the larger (108mm O.D., 10mm, 6 Bolt) 911 Carrera Axle Shaft Assemblies - Suitable for street & street cars - GKN / SKF / PORSCHE / PATRICK MS USA

Set Includes:
+ 2x Axle Drive Shaft Assembly - (1985-1989) PORSCHE 911 Carrera
+ 901 Trans Joint Flange Adapter Set to 108mm O.D. Axles
+ 914 to Carrera Wheel Flange Bearing Spacer Set S.S.
+ 5 Stud, Hub Centric Carrera Wheel Flange Set
+ High Quality Wheel Bearing Set
+ Complete Hardware Set / Axle Nuts

 PATRICK MOTORSPORTS USAGKNGENUINE PORSCHESKF
$1,950.00
914 Rear Coilover Spring Suspension Hardware

914 Rear Coilover Spring Suspension Hardware

Patrick Motorsports Exclusive
914 333 521 PMS
3.00 lbs

914 Rear Axle Suspension Spring Hardware Set - Adjustable coilover to BILSTEIN / KONI / PENSKE (Adjustable Step Type Dampers Only) - Billet Aluminum Black Anodized - PATRICK MS USA

+ Recommended for use with PN: 914 333 051 31 / B 46 0179 / F4B460179H1 - BILSTEIN Sport Rear Shock Absorber

+ Combine with 2.50 Inch I.D. x 8.00 Length spring set

For street use setup we recommend (175-225 lbs spring set) – For full race car setup we recommend (275- 325 lbs spring set). The system allows infinite ride height adjustability and corner weight balance setup. Please view our project car gallery to see this system in action or call us today for further setup details.

 PATRICK MOTORSPORTS USA
$200.00
914 Engine Mount for 914-6 Cyl 2.0 - 3.8L Engine Conversions - Weld In Type

914 Engine Mount for 914-6 Cyl 2.0 - 3.8L Engine Conversions - Weld In Type

Patrick Motorsports Exclusive
914 375 WIM PMS
10 In Stock
13.50 lbs

914 6 Engine Conversion Mount - (1970-1976) PORSCHE 914-4 to 2.0 - 3.6L H6 Engines - (Weld In) Bulk Head Cross Bracket Mount to Engine Support Carrier - Includes Urethane Isolation Bushings for Street & Track Use - 3D Optimized Design allows for pivoting engine for direct installation - TIG Welded Steel Fabrication - Black Powdercoat Finish (Bulk head support brackets raw steel finish for welding application) - PATRICK MS USA

+ Fully compatible with original / aftermarket exhaust heat exchangers, brake pressure regulator and original electrical wiring harness.

+ Replaces PNs:
901 115 012 00 - Engine Carrier Bracket
914 375 049 00 - Engine Mounting
914 375 057 00 - Base Upper
914 375 158 00 - Base Lower

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONPMS 915 CONVERSION
$460.00
914-6 Throttle Accelerator Cable Conversion Kit - (1970-1976) PORSCHE 914-4 to H6 Cylinder

914 Throttle Accelerator Cable Conversion Kit - (1970-1976) PORSCHE 914-4 to H6 Cylinder (2.0L - 3.2L) Engines - Complete kit includes a heavy duty cable, new support mounting tab adapter bracket on transmission, ball socket end and high temperature silicone fire sleeve - PATRICK MS USA

Application:
(1970-1976) 914 to Cylinder (2.0L - 3.2L) Engines | Note: For 3.6L DME 964 / 993 Engines, use PN: PMP 914 964 993 TC

Designed to replace the original 914 throttle cable PNs:
914 423 066 00 – 914-6 Accelerator Cable
914 423 285 01 – Support Mounting Bracket

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$140.00
914 6 Gear Shifter System to 915 WEVO Tail Shifter Transmission

914 6 Gear Shifter System to 915 WEVO Tail Shifter Transmission

Patrick Motorsports Exclusive
914 915 WEVO SRK PMS
9.75 lbs

914-6 Shifter System to 915 WEVO Tail Shifter Transmission - Complete conversion kit includes GENUINE PORSCHE 911 / 915 Reconditioned gear shifter bracket (Shift tower) assembly, couplers, specially designed tunnel & rear gear shift rods, fire wall bearing & apex joints. - PATRICK MS USA

+ Note: Gearshift lever sleeve (911 424 047 00) or leather sleeve and 5-speed gearshift knob (911 424 071 01) are available separately.

+ This kit is specially designed / configured for 914-6 models equipped with 915 transmissions and WEVO tail shifter systems only. Expect exact shifting feel with this system.

 PATRICK MOTORSPORTS USAPMS 915 CONVERSION
$1,285.00
Air Intake Filter Conversion Kit 914 6 to 993 3.6L

Air Intake Filter Conversion Kit 914 6 to 993 3.6L

Patrick Motorsports Exclusive
914 993 IBK PMS
0.50 lbs

AIR INTAKE CONVERSION KIT - PORSCHE 914 6 CHASSIS TO 993 3.6L (1995) ENGINE - INCLUDES FORMED INTAKE BOOT, DELRIN PLUG PORT SET, DELRIN MAF SENSOR ADAPTOR TUBE, ADAPTER HOSE AND HARDWARE KIT. OUR INTAKE KITS WILL TOP OFF YOUR CONVERSATION FOR THAT FACTORY INSTALLED LOOK.THEY HAVE BEEN TESTED AND DESIGNED FOR THIS APPLICATION TO MAXIMIZE AIR FLOW AND INCREASE HORSEPOWER.

+ FOR USE WITH CONE FILTER KIT: K&N RU-3130 (SOLD SEPARATELY)

ALWAYS USE OUR EXCLUSIVE PRODUCTS WHEN COMPLETING YOUR ENGINE CONVERSIONS! THEY WILL SAVE YOU TIME AND MONEY OVER TRYING TO DEVELOP ONE FOR YOUR APPLICATION. WE HAVE SPENT THE TIME TO MAKE THE NEEDED COMPONENTS FOR YOUR PROJECT AS CLOSE TO FACTORY AS POSSIBLE AND IN MANY CASES EVEN NICER THAN THE FACTORY DID.

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONGENUINE PORSCHE
$145.00
911 - 914 - 930 Engine Crank Pulley - 964 (3.6L DME) Engine Conversion with Air Conditioner

Engine Crank Shaft Pulley for 964 (3.6L DME) Engine to 911 / 930 / 914 Chassis with Air Conditioner - Billet Aluminum Mil Spec Black Anodize - PATRICK MS USA + Includes new PORSCHE Hex Head Bolt (Flanged).

* Not to be used for '90-'94 964 3 belt pulley replacement *

+ Replaces PN: 964 102 050 01 - Crankshaft Pulley with Air Conditioner M64.01/02/03
+ For (1990-1994) 964 tapered end crankshafts only - Designed for 964 RS RSR & GT-2 tapered crankshafts in 911 & 914 models ONLY (Must use alternate AC compressor).

** NOT SUITABLE FOR REPLACEMENT ORIGINAL WORN OUT HARMONIC DAMPER **

Specially designed ONLY for use with supplement Part Numbers:
+ 930 115 017 02 - (1984-1989) 911 Carrera 3.2L Motor Console
+ 930 126 015 00 - (1984-1989) 911 Carrera 3.2L AC compressor mounting bracket
+ 930 126 116 02 - (1984-1989) 911 Carrera 3.2L Angle Bracket
+ 964 126 121 01 - (1989-1994) 964 Carrera AC compressor | *Unit allows intake manifold clearance

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$295.00
Adapter Engine Oil Union Feed 993 - 3.6L Engines - Filter Console

Adapter Engine Oil Union Feed 993 - 3.6L Engines - Filter Console

Patrick Motorsports Exclusive
964 207 317 00 PMS
5 In Stock
0.38 lbs

Adapter Engine Oil Union (Feed) - Crankcase Right Side - (1994-1998) 993 / 3.6L Engines - GENUINE PORSCHE / PATRICK MS USA

+ Ideal for use with (1994-1998) 993, 3.6L Engine Conversions to 914 / 911

Includes PNs:
1) 900 067 247 02 - Screw
1) 999 707 309 40 - O-Ring
1) 999 707 316 40 - O-Ring

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONGENUINE PORSCHE
$98.00
964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

964 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - Chassis

Patrick Motorsports Exclusive
964 612 173 DME PMS
9 In Stock
1.50 lbs

964 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 Chassis to (1990-1994) PORSCHE 964 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

Interfaces PNs:
964 612 173 02 - Wiring Harness NR.173 - DME - (1989) M481 (Manual Transmission)
964 612 173 04 - Wiring Harness NR.173 - DME - (1990-) M481 (Manual Transmission)
964 612 173 03 - Wiring Harness NR.173 - DME - (-1991) M249 (Tiptronic Transmission)
964 612 173 35 - Wiring Harness NR.173 - DME - (1992-) M249 (Tiptronic Transmission)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$385.00
Engine Crank Pulley - 993 Single Belt Crank RS / RSR Type

Engine Crank Pulley - 993 Single Belt Crank RS / RSR Type

Patrick Motorsports Exclusive
993 102 050 SBC PMS
0.70 lbs

Engine Crankshaft Pulley - (1994-1998) PORSCHE 911 / 993 Carrera 3.6L DME Engine to (-89) 911 Single Belt 993 3.6L Engine Conversion / RS / RSR - For cylindrical (straight) hub end crankshafts - 6061 T6 Billet Aluminum Alloy, Mil-Spec Black Anodized - PATRICK MS USA

+ Replaces PN: 993 102 050 01 - Engine Crankshaft Pulley - 3 Belt Groove (429g)
+ Specially Designed for PN: 993 102 021 01 / 02 - Crankshaft Cylindrical End Crankshaft
+ Includes - Hexagon Head Bolt (Torque Spec: 110 ft/lbs (149 Nm) | Blue Loctite Recommended)
+ Recommended for use with: 10x750 V-Belt & PN: 993 106 051 80 PMS - RS Fan Impeller Wheel Hub

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$240.00
964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive

964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive

Patrick Motorsports Exclusive
993 106 051 80 PMS
10 In Stock
0.50 lbs

964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive - Converts To Single Belt Drive - Ideal for Sport / Motorsport / Engine Conversions - Updated Reproduction of the Original Porsche Motorsport / Euro RS Unit - CAD Designed Lightweight Optimized - 6061-T6 Billet Aluminum Alloy - Mil Spec. Black Anodized - (PMP36FANHUB) - PATRICK MS USA

+ Made for use with original or stud conversion hardware.
+ Replacement for PN: 964 106 051 30 - Original Fan Hub With Bearing
+ Reproduction of 911 Carrera RS Part Number: 993 106 051 80 – Wheel Hub for Engine Code: M64.20

 PATRICK MOTORSPORTS USA
$140.00
993 Engine Air Injection Secondary Smog Pump Port Plug Block Off Set (SAI)

993 Engine Air Injection Secondary Smog Pump Port Plug Block Off Set (SAI)

Patrick Motorsports Exclusive
993 113 200 AIB PMS
5 In Stock
0.30 lbs

993 Air Injection Port Plug Block Off Set - (1995-1998) PORSCHE 993 / Turbo 3.6L DME Engines - SAI (Secondary Air Injection) - Installed in top left / right side of camshaft housings - PATRICK MS USA

+ Includes specially designed billet screw plugs and seal ring sets.

Replaces PNs:
900 915 005 02 - Connection Piece
900 123 019 30 - Sealing Ring
993 113 275 01 - Air Tube Left
993 113 288 02 - Air Tube Right
993 624 103 00 / 993 624 103 01 - Air Injection Pump
993 113 250 03 - Check Valve
993 113 251 05 - Distributor Housing
+ All air injection ancillary parts.

The 993, 3.6L DME engines included a secondary air injection system to meet emission control standards. The components of this air injection system consisting of air tubes, distributor housing, check valve and air pump assembly. Working with the exhaust catalytic converter emission control system, it functions to reduce emissions on cold engine start up by injecting air into the engine camshaft housings flowing down through the exhaust ports. When installing and converting to the (1994-1998) 993, 3.6L DME engines to pre 1995 chassis, or race cars, the pump assembly can be removed saving weight and complexity.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$30.00
Ignition Coil Mount Adapter (Dual) - 993 Carrera 3.6L DME Engines

Ignition Coil Mount Adapter (Dual) - 993 Carrera 3.6L DME Engines

Patrick Motorsports Exclusive
993 602 CAM PMP
10 In Stock
2.00 lbs

Ignition Coil Mount Adapter (Dual) - (1994-1998) PORSCHE 993 Carrera 3.6L DME Engines to 911 / 930 / 914 Engine Conversions - Mounts to Left Side Fan Housing - Black Wrinkle Powdercoated - PATRICK MS USA

+ Use with PN: 993 602 071 01 - Ignition Coil Set (Dual)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$120.00
993 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - 964 Chassis

993 3.6L DME Engine Wire Harness Conversion to 911 - 930 - 914 - 964 Chassis

Patrick Motorsports Exclusive
993 612 173 DME PMS
5 In Stock
1.50 lbs

993 3.6L DME Engine Chassis Conversion Harness - Electrical Wiring Harness Interface Adapter to Chassis - 911 / 930 Turbo / 914 / 964 Chassis to (1995-1998) PORSCHE 993 Carrera 3.6L DME Engine Control Unit Harness - Includes Original Equipment Small & Large 14 Pole Pin Connectors, Fuel Pump Relay, Inline Fuse, OBD Interface Port, Check Engine Light Lead & Supplemental Engine Compartment Jumper Interface Harness - PATRICK MS USA

+ Includes easy to follow Plug-In-Play installation instructions

OUR HARNESSES MAKE YOUR ENGINE SWAPS A PLUG AND PLAY OPERATION, NO DAMAGED COMPONENTS BY INCORRECT WIRING! ALSO RETAIN THAT FACTORY INSTALLED LOOK.

Interfaces PNs:
993 612 173 14 - Wiring Harness NR.173 - DME - (1994)
993 612 173 27 - Wiring Harness NR.173 - DME - (1995)
993 612 173 33 - Wiring Harness NR.173 - DME - (-1997)
993 612 173 35 - Wiring Harness NR.173 - DME - (1998)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONGENUINE PORSCHE
$395.00
Clutch Kit 911 915 225mm Centerforce DF200199

Clutch Kit 911 915 225mm Centerforce DF200199

Patrick Motorsports Exclusive
CLU DF200199
10 In Stock
17.50 lbs

Clutch Set - 225 mm Sport (1972-1986) PORSCHE 911 / 915 Transmission - Matched High Clampload Steel Pressure Plate (12.75 Lbs. / 5.78 Kg) & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA - MSRP: $1712.95

+ Precision Balanced
+ Includes Clutch Alignment Tool
+ Torque Capacity rated at 430 ft/lbs.
+ Use with PN: 915 116 082 80 - Clutch Release Bearing

+ For lightweight aluminum clutch cover option, use PN: DF991002

PATRICK CLUTCHESCenterforce - The Performance Clutch
$949.00
911 Turbo Carrera 930 Clutch Set - Centerforce Clutch Kit - G50 SBH

911 Turbo Carrera 930 Clutch Set - Centerforce Clutch Kit - G50 SBH

Patrick Motorsports Exclusive
CLU DF255255
1 In Stock
15.00 lbs

Clutch Set - 240mm Sport Lightweight (1976-1977) PORSCHE 911 Turbo Carrera / 930 4-Speed Transmission "Short, Low Profile" - Matched High Clamp Load Aluminum Pressure Plate & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA

+ High Clamp Load | Torque Capacity rated at 580 ft/lbs. Light Pedal Effort
+ Also used with lightweight options for (1978-1988) 930 Turbo with adapter or with G50 Short Bell Housing Transaxle Conversions
+ Replaces PN: 930 116 021 00 - Clutch Pressure Plate
+ Replaces PN: 930 116 014 02 - Clutch Disc Spring Torsion Hub

PATRICK CLUTCHESPMS G50 CONVERSION Centerforce - The Performance ClutchSachs
$1,400.00
ELE CREADER IV

ELE CREADER IV

ELE CREADER IV
0.80 lbs

DTC READER - DIAGNOSTIC TROUBLE CODE READER - OBD II & E OBD / INCLUDING CAN PROTOCOL *
Features:
1. LCD display
2. Display the content of trouble code
3. FREEZE FRAME function
4. Supporting CANBUS diagnosis
5. Manual reading code and clearing code

Specifications
1. LCD display(128*32), displaying by 2 lines, LED backlight
2. Two keys operation
3. Enclosed a disc, including most manufacturer code information. Now there is more than 7000 manufacturer codes, and it updates continuously.
4. Enclosed users' manual, including the explanation of trouble code before 1000 number.

 PATRICK MOTORSPORTS USA
$98.00
Engine Oil Case Union Adapter Fitting - Oil Tank to Feed Inlet to Engine AN-16

Engine Oil Case Union Adapter Fitting - Oil Tank to Feed Inlet to Engine AN-16

Patrick Motorsports Exclusive
ENG 901 107 AN16 PMP
5 In Stock
0.40 lbs

Engine Oil Feed Inlet Case Union Adapter Set - (1965-1989) 911 / 914-6 to AN-16 Male - Billet Aluminum with Seal & Stud Mounting Hardware - PATRICK MS USA

+ For use with Engine Oil Filter Consoles.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$120.00
Engine Sheet Metal Set - PORSCHE 914-6 3.6L DME Conversion

Engine Sheet Metal Set - PORSCHE 914-6 3.6L DME Conversion

Patrick Motorsports Exclusive
ENG 9146 SM 36 BPC PMP
5.50 lbs

Engine Sheet Metal Set - Black - PORSCHE 914-6 (Application: H6, 3.6L DME Engines) - High Quality Steel Batch Production Set - Black Powdercoated Finish - PATRICK MS USA

When upgrading and converting the PORSCHE 914-4 to the larger displacement H6 cylinder engines, the original engine sheet metal set will not work and needs to be replaced entirely.
* NO LONGER AVAILABLE *

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$0.00
Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Raw

Engine Sheet Metal Set - PORSCHE 914-6 Conversion - Raw

Patrick Motorsports Exclusive
ENG 9146 SM PMS
5.50 lbs

Engine Sheet Metal Set - Raw - PORSCHE 914-6 (Application: H6, 2.0 - 3.6L Engines) - High Quality Steel Batch Reproduction Set - Raw Steel Finish - PATRICK MS USA

+ Note: 3.2L with DME & 3.6L DME Engines Fitting & Trim Modifications Required
+ For (2.0-3.0L H6 Engines) use our pre finished and powdercoated set.

When upgrading and converting the PORSCHE 914-4 to the larger displacement H6 cylinder engines, the original engine sheet metal set will not work and needs to be replaced entirely.
* NO LONGER AVAILABLE *

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$0.00
Oil Pressure Sending Unit 3.2L- 3.6L Engine Conversion - Dual Pole

Oil Pressure Sending Unit 3.2L- 3.6L Engine Conversion - Dual Pole

Patrick Motorsports Exclusive
ENG36 OIL PS2 PMS
0.50 lbs

Oil Pressure Sending Unit for Gauge - Application to (1965-1977) PORSCHE 911 (with 0-10 Bar Gauge) to 3.2L & 3.6L DME Engine Conversion - Includes Double Pole Type Sender for Oil Pressure & Warning Light (0-10 Bar | 150 PSI), M18 Adapter Fitting & Seal Ring - VDO SIEMENS / PATRICK MS USA

+ Replaces PNs:
928 606 203 01 SS - Oil Pressure Sender (Superseded to: 928 606 203 04)
911 606 135 00 - Oil Pressure Sender (0-5 Bar)

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONVDO
$85.00
Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.625 In.

Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.625 In.

Patrick Motorsports Exclusive
EXH FPOR-0500
38.00 lbs

Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.625 In. (41.28mm) O.D. Primary / (38mm I.D.) - Mandrel Bent 304 Stainless Steel - TIG Welded - Polished Finish - B&B / PATRICK MS USA - MSRP: $2310.00

+ Includes Rear muffler gasket and hardware set.

Replaces PNs:
901 211 003 00 - Exhaust Heat Exchanger - Left - Cylinder 4-6
901 211 004 00 - Exhaust Heat Exchanger - Right - Cylinder 1-3

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONB&B Fabrication
$2,250.00
Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.750 In.

Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.750 In.

Patrick Motorsports Exclusive
EXH FPOR-0510
1 In Stock
38.00 lbs

Exhaust Heat Exchanger Header Manifold Set - PORSCHE 914-6 | 1.750 In. (44.45mm) O.D. Primary / (41.28mm I.D.) - Mandrel Bent 304 Stainless Steel - TIG Welded - Polished Finish - B&B / PATRICK MS USA - MSRP: $2310.00

+ Includes Rear muffler gasket and hardware set.

Replaces PNs:
901 211 003 00 - Exhaust Heat Exchanger - Left - Cylinder 4-6
901 211 004 00 - Exhaust Heat Exchanger - Right - Cylinder 1-3

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSIONB&B Fabrication
$2,250.00
Sport Muffler Exhaust Silencer - 911RS - 914 6

Sport Muffler Exhaust Silencer - 911RS - 914 6

Patrick Motorsports Exclusive
EXHESM
23.00 lbs

Sport Exhaust Silencer Muffler - PORSCHE 911RS Style for early 911 and 914-6 (with dual bank heat exchangers / headers) - Features Dual (50mm) Inlets & Dual (57mm) Outlets - Tip Center to Center 340mm - Mild steel construction with OE type high temperature painted finish - DANSK / PATRICK MS USA

+ 911 & 914 applications require tip clearance on rear valance
+ Not for 914 models equipped with H6 / 915 Wevo tail shifter transaxles
+ Ceramic coating available in Luster Silver, Titanium Gray & Satin Black for additional: $250.00

*Weighs only 23 Lbs. (10.43 Kg.)
** SHOWN IN LUSTER SILVER CERAMIC COATING

 PATRICK MOTORSPORTS USADansk
$650.00
Fuel Pump 911 - 964 - 993 3.6L

Fuel Pump 911 - 964 - 993 3.6L

FUE 964 620 104 00
2.23 lbs

Fuel Pump - (1989-1998) 911 Carrera 4 / 2 / 3.6L Naturally Aspirated External Pump - (Silver Housing) - OEM BOSCH (0 0580 464 058) - MSRP: $652.53

Bosch
$260.00
Union Adapter Fitting AN-12 Male To 30MM Female

Union Adapter Fitting (30mm Inverted Female to AN-12 Male) - Billet Aluminum - Hard Anodized - GOODRIDGE, MSRP: $41.69

Goodridge
$30.00
Engine Oil Breather Hose Cloth Braided 24mm ID - Oil - Crank Ventilation

Engine Oil Breather / Bleeding Connection Hose Hose - 24mm I.D. - Cloth Braided - Used for engine to oil tank / Crank ventilation - GERMAN

UNIT: .20 Qty. = 1 Meter

Cohline
$35.00
Dry Sump Oil Tank Assembly - 4 Gallon

Dry Sump Oil Tank Assembly - 4 Gallon

OIL 08-0011 DB
15.00 lbs

Dry Sump Oil Tank Assembly | 4 Gallon / 16 Quart (15.14 Liters) - Single scavenge inlet / Dual breather | AN-12 female inlet / AN-16 female feed outlet (On bottom) 19" Tall x 9" Dia. - Aluminum with internal baffling - PETERSON FLUID SYSTEMS

+ Use with PN: 08-0101 - Oil Tank Mount Set

Peterson Fluid Systems
$530.00
Breather Ventilation Catch Tank - 3 Inch Diameter Remote Can Assembly

Breather Ventilation Catch Tank - 3 Inch Diameter Remote Can Assembly - AN-08 & AN-12 Male Fittings - Features Internal Baffling & Quick Drain Valve - Ideal for dry sump oil tank or vacuum systems - Spun Aluminum TIG Welded - PETERSON FLUID SYSTEMS

+ Includes mounting clamp & Top mounted breather filter.

Peterson Fluid Systems
$180.00
In-Line Filter - AN-12 Male Inlet / Outlet - 60 Micron

In-Line Filter - AN-12 Male Inlet / Outlet - 60 Micron (.0023 Inch) Serviceable Stainless Steel Filter Cartridge - 4.50" Long x 2.00" Dia. - Billet Aluminum Red Anodized - PETERSON FLUID SYSTEMS

Peterson Fluid Systems
$175.00
Oil Cooler - Front Center Mount 500 COM  - 911 914 GT  / RS / RSR

Oil Cooler - Front Center Mount 500 COM - 911 914 GT / RS / RSR

Patrick Motorsports Exclusive
OIL 500 COM 22mm PMP
5 In Stock
7.65 lbs

Oil Cooler - Center Front Mount 500 COM - GT / RS / RSR - Competition Single Pass - Size: 23.50 x 5.50 x 2.25 Inches (59.69 x 13.97 x 5.72 cm) - 4x) 22mm Ports - 1.04L Capacity - Includes 4) 8mm Mounting bungs - Brazed Aluminum & Durable Epoxy Black Finnish - SETRAB / PATRICK MS USA EXCLUSIVE

* UNIONS & PORT PLUGS NOT INCLUDED

+ Supports vehicles to +600 HP range.
+ Specially Designed Production - Manufactured by Setrab of Sweden

 PATRICK MOTORSPORTS USASetrab
$640.00
914-6 Engine Oil Tank Body Shell Assembly - Reproduction Dry Sump Conversion

914-6 Engine Oil Tank Body Shell Assembly - Reproduction Dry Sump Conversion

Patrick Motorsports Exclusive
OIL 901 107 005 40 PMS
9.35 lbs

914-6 Engine Oil Tank Body Shell Assembly - Reproduction dry sump oil tank fabricated from aluminum, TIG welded. Features baffled design and billet components - Certified pressure tested - Includes mounting hardware with OE bushings & M22 x 1.50 female feed & return fitting ports. (Use with Metric fittings or M22 to AN-12 & AN-16) - GENUINE PATRICK MS USA

* Filter console, filler neck, fittings & lines sold separately.

> Replaces Genuine Porsche PN: 901 107 005 40 - (914-6) Oil Tank Body Shell

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$800.00
914 6 Oil Tank Filler Neck Kit

914 6 Oil Tank Filler Neck Kit

Patrick Motorsports Exclusive
OIL 901 107 640 PMS
50 In Stock
2.00 lbs

Oil Filler Neck Kit - Reproduction Fabricated from Aluminum - Includes stainless steel oil level dipstick, hose boot coupling kit and sealed CAD plated cap - PATRICK MS USA

+ Replaces PNs: 901 107 640 40 - Oil Filler Neck, 901 107 770 40 - Oil Level Dipstick, Cap, Seal, Connection Boot

 PATRICK MOTORSPORTS USAPMS 914 ENGINE CONVERSION
$165.00
Oil Breather Catch Tank Set for Engine Crankcase and Transmission

Oil Breather Catch Tank Set for Engine Crankcase and Transmission

Patrick Motorsports Exclusive
OIL 911 914 OB ET
5.00 lbs

Oil Breather Catch Tank Set for Engine Crankcase and Transmission Ventilation on Porsche Race Cars

+ Set Includes: Breather catch tank assembly with internal baffles, insulated mounting bracket, AN adapter fittings, original type cloth braided hose & hardware.

 PATRICK MOTORSPORTS USACohlineGoodridgeGENUINE PORSCHE
$325.00
Oil Breather Catch Tank Set for Engine Crankcase Ventilation

Oil Breather Catch Tank Set for Engine Crankcase Ventilation

Patrick Motorsports Exclusive
OIL 911 914 OBE PMS
3.00 lbs

Oil Breather Catch Tank Set for Engine Crankcase Ventilation
+ Set Includes: Breather Catch Tank with Internal Baffles, Insulated Mounting Hardware, AN Adapter Fittings, Original Type Cloth Braided Hose with Hardware.

+ Ideal for engine and transaxle conversions and racing applications.
+ Tank equipped with dual breather ports for both engine and or transmission ventilation.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSIONCohlineGoodridgeGENUINE PORSCHEPeterson Fluid Systems
$275.00
Battery Carrier Mount for ODYSSEY PC 925

Battery Carrier Mount for ODYSSEY PC 925

Patrick Motorsports Exclusive
PMPPC925MNT
1.50 lbs

Battery Carrier Mount "UNIVERSAL" - Designed For ODYSSEY PC 925 Batteries - Black Power coated, Fabricated Steel - Includes Mounting Hardware Kit - PATRICK MS USA

WITH THIS MOUNT YOU CAN LOCATE THE BATTERY WHERE YOU NEED IT TO GET THE BEST WEIGHT DISTRIBUTION AND HOLD THE BATTERY SECURELY FOR ADDED SAFETY.

 PATRICK MOTORSPORTS USAPMS 911 ENGINE CONVERSIONPMS 914 ENGINE CONVERSION
$110.00

Customer Testimonials

Greg Coon

Firefighter

As I searched for a local shop I kept coming back to PMS. Even though I live in Southern Calif, I called Eric countless times, he was more then happy to educate me on the correct steps to take that worked withen my budget. PMS completed a 911 suspension swap, back dated my bumpers, did some body work and went through my 914 from front to back to make sure I was leaving there shop with a trouble free car. Now that I have my 914 mechanically and cosmetically updated my next step will be a 2.7 swap which will be completed by PMS.

Jim Bist

2013 Boxster S

I had a track day coming up at Laguna Seca and wanted to get some upgrades done to my vehicle to prepare it. I had been travelling and waited until the last minute but Robert was able to accommodate me. Got everything I needed done and saved me a trip by being able to run a track alignment on my vehicle to finish it all off. Robert was able to pull everything together in a matter of days. The service was excellent and the facility was top notch, truly amazing, a built from the ground up complete facility build for servicing Porsche. Truly great service. Would not hesitate to recommend and will take my vehicle there again.

Scott Brown

1969 911E, 1998 Carrera S 3.8 RS

The guys at Patrick Motorsports are the best! Very capable, knowledgeable, friendly and enthusiastic. The quality of their work is top notch. Jim is a Porsche Master......his staff are all professionals as well. They have rare parts and know the air cooled cars very well. They are no slouches with the water cooled cars either. I highly recommend them for all your Porsche needs!

Phill Pierson

Porsche Mechanic

Thank you for taking the time today to put together a great clutch package for my client. I appreciate the Free Balancing!