(2001-2004) 3.6L H6 Turbo Parts

Flywheel & Clutch Package RS / Turbo / GT2 / GT3

Lightweight, Single Mass Flywheel Conversion | For sporting and racing applications a reduction in the rotational mass of the flywheel and clutch assembly quickens engine acceleration and improves handling performance. As found on RS and GT models, the single mass lightweight flywheel is machined to exacting tolerances from solid steel thus reducing rotational mass by 17.90 Lbs. (8.12 Kg.)

Coupled with the latest high performance OEM Sachs Performance clutch parts, this system offers high clamp load and durability for sport driving.

Pedal stiffness is only slightly increased and clutch engagement and control is easily modulated. Overall throttle response in sharpened and matching engine speeds becomes easier during performance downshifting.

Package Includes:
- Flywheel – Patrick Motorsports / RS Single Mass (13.75 Lbs. | 6.24 Kg.)
- Pilot Bearing – Porsche Sealed
- Starter Ring Gear – Porsche RS
- Clutch Cover – Sachs Performance GT2
- Clutch Disc – Sachs GT2
- Clutch Release Bearing – Sachs RS
- Guild Tube – Porsche RS
- Hardware Mounting Package
- Precision Balancing Service

RSR and Motorsport flywheel and clutch systems are also available upon request.

Single Mass Flywheel Conversion Kit

Single Mass Flywheel Conversion Kit
+ For use with Part Numbers: PMP 964 102 239 31 SM - RS Single Mass Flywheel & PMP 965 102 239 31 - M4P3 Single Mass Flywheel

Flywheel Single Mass Conversion Euro RS / GT3

Flywheel - RS / Sport Single Mass (240mm) - 60-2 Timing Features - Application to: PORSCHE 964 / 993 / 996 / 997 / Turbo / RS / GT2 / GT3 - Billet Steel - PATRICK MS EXCLUSIVE - MSRP: $799.95
+ Use with PN: PKG 964 ERS SMC KIT - RS Single Mass Flywheel Conversion Kit
+ Computer Balanced

"SAVES OVER 12 LBS. OVER THE O.E. DUAL MASS FLYWHEEL!"

Engine Conversion Harness 993 3.6L DME

ENGINE CONVERSION HARNESS - PORSCHE 911 / 914 / 964 CHASSIS INTERFACE TO 3.6L (993) '95-'98 ENGINE CONTROL UNIT - FEATURES NEW ORIGINAL EQUIPMENT CONNECTIONS, FUEL PUMP RELAY, OBD II SCAN PORT AND CHECK ENGINE LIGHT WIRE - PATRICK MOTORSPORTS EXCLUSIVE
+ ALSO INCLUDES MODEL SPECIFIC CHASSIS JUMPER HARNESS FOR 911 CHASSIS

OUR HARNESSES MAKE YOUR ENGINE SWAPS A PLUG AND PLAY OPERATION, NO DAMMAGED COMPONANTS BY INCORRECT WIRING! ALSO RETAIN THAT FACTORY INSTALLED LOOK.

*ALSO INCLUDES 911 ENG. BAY JUMPER HARNESS

Spal Fan 5.2" Low Profile

5.2" Paddle Blade Low Profile Fan / 12V Pusher, VA31-A101-46S * 5.2"P/12V/SUM - SPAL USA

This fan works excellent with our line of Setrab Oil Coolers

Cool Shirt Cool Water Shirts in Blue

COOL SHIRT - COOL WATER SHIRT - BLUE - *HANS DEVICE COMPATIBLE - AVAILABLE IN SMALL, MEDIUM, LARGE, X-LARGE AND XX-LARGE *PLEASE SPECIFY SIZE WHEN ORDERING

Cool Shirt Club System 24 Quart

COOL SHIRT - CLUB SYSTEM COMPLETE - 24 QUART -SEPARATELY

The Club 24 System comes with a 24qt cooling unit with an internal pump which supplies cooled water to the shirt through 8ft of double insulated hose with automatic shutoff / quick disconnects. The optional Temperature Control Switch gives the driver complete control of their comfort while in their race car. Total weight for the Club System is only 4lbs. Available options include the Temperature Control Switch, SFI-approved FireWear® fire-retardant Cool Shirt®, Universal Drain Kit, Emergency Pull-Release Connectors and Mounting Tray with strap.

The Club Systems are the most popular driver system manufactured. The Club System 24 combines the advantage of Cool Shirt®’s temperature-controlled cooling power with hours of cooling time.

Ideal for those racing applications where space is not as much of an issue and the races may run long. Versatile enough to be perfect for everything from road courses to oval track racing, the Club 24 System keeps you cool and alert for the entire race when going the distance really counts.

** COOL SHIRT SOLD SEPARATELY

Cool Shirt - Temp Control Switch Kit

COOL SHIRT - TEMPERATURE CONTROL SWITCH - FLOW CONTROLLER

Cool Shirt Firewear Cool Water Shirt - Large Short Sleeve

COOL SHIRT - FIREWEAR COOL WATER SHIRT - LARGE - SHORT SLEEVE *HANS DEVICE COMPATIBLE

Cool Shirt Mounting Tray Kit for 24 Quart System

COOL SHIRT - MOUNTING TRAY AND STRAP SYSTEM FOR 24 QUART SYSTEM

Cool Shirt Tube Connector Set

COOL SHIRT - SAFETY PULL RELEASE CONNECTORS SET - PAIR

Cool Shirt Pro Air & Water System - 24 Quart

COOL SHIRT - PRO AIR & WATER SYSTEM COMPLETE - 24 QUART - The Pro Air & Water System comes with a 24 quart cooling unit with an internal pump that supplies temperature-controlled cool water to the shirt and HEPA-4 filtered, chilled air to your helmet via a 235 CFM blower. Eight feet of double insulated water hose with automatic shutoff/quick disconnects attach the shirt to the unit, and the Dual Temperature Control Switch allows the user to regulate the flow and the temperature of water for personal comfort based on external temperature variation. Total weight on this system is only nine pounds.

*COOL SHIRT IN SMALL-XX LARGE SOLD SEPARATELY

Cool Shirt Connector & Drain Kit

COOL SHIRT - UNIVERSAL CONNECTOR AND DRAIN KIT - 6 PEICE KIT

Photo Radar License Plate Shield

LICENSE PLATE SHIELD - "SUPER PROTECTOR" - NO TICKET ANTI-PHOTO PLATE PROTECTOR - DOMESTIC CAR - LIST: $39.95

ACC038-RAGGTOPP

RAGGTOPP FABRIC CONVERTIBLE TOP CLEANER AND PROTECTANT KIT - LIST: $34.99

Computer Balancing

ROTATIONAL BALANCE OPERATIONS - CERTIFIED COMPUTERIZED BALANCING SERVICE
+ SERVICE INCLUDED AT NO CHARGE WITH COMPLETE FLYWHEEL AND CLUTCH SYSTEMS

Battery - ODYSSEY PC-925-A

Battery - ODYSSEY PC-925-A - 7.00D X 6.625W x 5.00T - 26 Lbs. - 925 Cranking Amps for 5 Secs. - Terminal: M6 for automotive - ENERSYS (0765-2024) - MSRP: $240.74

Latch Rubber Draw T-Handle

LATCH - RUBBER DRAW - SMALL T- HANDLE (69.0mm O.A.) - AIRCRAFT QUALITY WITH STAINLESS STEEL HARDWARE

License Plate Light

LICENSE PLATE LIGHT - 2 PER CAR - INCLUDES RUBBER MOUNTING GASKET KIT - CHROME - HELLA - LIST: $83.25

Porsche Hood Emblem Crest Kit - Gold Type

Porsche Hood Emblem Crest Kit - Gold Type - GENUINE PORSCHE
+ Includes base seal and nut set

BOD LIDPINKIT

DECK LID PIN KIT - HOLD DOWN SET INCLUDES SPECIALLY MACHINED DELRIN STRIKER DISCS, ALUMINUM PINS, AND LOCKING CLIPS - LIGHTWEIGHT - PATRICK MS EXCLUSIVE

TILTON ADJUSTABLE BRAKE PROPORTION VALVE

TILTON ADJUSTABLE BRAKE PROPORTION VALVE - 7 POSITION LEVER TYPE - 10 MM X 1 MM PORT THREADS - ALUMINUM WITH BLACK ANODIZED FINNISH

SOCKET PIECE - 90 DEG. BRAKE BANJO FITTING

SOCKET PIECE - 90 DEG. BRAKE BANJO FITTING - PORSCHE - 10 MM x 1.0 MM - FOR CARS WITHOUT BRAKE BOOSTER - LIST: $18.88

Damping Shim 30mm

DAMPING SHIM - REAR BRAKE PAD SHIM - PORSCHE - 30 MM - 4 PER CAR - GENUINE - LIST: $7.32

BRA 996 351 405 01 Z

BRAKE DISC - FRONT RIGHT - PORSCHE BOXSTER 986 S 2000 / CAYMAN S 06-08 / 911 CARRERA - 99-08 ZIMMERMANN - LIST: $187.90

Brake Disc Rotor Left Front

BRAKE ROTOR LEFT FRONT CARRERA 4"S" '02-'05 911 TURBO '01'-'05 CARRERA 'S' FROM '05 CARRERA "S4" FROM '06 LIST $215.87

Brake Disc Rotor Right Front

BRAKE ROTOR RIGHT FRONT CARRERA 4"S" '02-'05 911 TURBO '01'-'05 CARRERA 'S' FROM '05 CARRERA "S4" FROM '06 LIST $215.8

Brake Pads Front 996 Turbo - GT3

FRONT BRAKE PADS 996 TURBO '04-'05 GT3 GENUINE 02-05 (NOT FOR CARS WITH CAST STEEL DISCS)

Brake Disc Rotor Rear

REAR BRAKE ROTORS CARRERA 4 "S" '02-'05 CARRERA '04-'05 GT3 STREET 911 TURBO '01-'05 CARRERA 'S' FROM '05 CARRERA "S4"FROM '06 LIST $187.84

Brake Pad Set Rear Boxster

BRAKE PAD SET - REAR - PORSCHE 986 BOXSTER / S THRU '04 / 911 CARRERA '99-'05 / CARRERA 4 '99-'05 - MOUNTING PARTS: 1 QTY: 996 352 949 01 - GENUINE - LIST: $128.35

Brake Pad Set

BRAKE PAD SET- PORSCHE 996 TURBO '01-'05 REAR, CARRERA & CARRERA 4 '99-'05 FRONT,CAYMAN"S" FRONT, BOXSTER"S" FRONT - ALSO USE MOUNT PARTS: 1 QTY 996 351 959 01 KIT -

BRA 996 355 139 01 SS

HOSE - BRAKE - STAINLESS STEEL BRAIDED – 911T '01-05, BOXSTER ALL, CARRERA & CARRERA 4, CARRERA S '05 ON, CARRERA S4 '06' 0N LIST-$59.95 (4 PER CAR)

BRA 996 612 365 00 P

WEAR SENSOR - LEFT / RIGHT BRAKE PAD - 986 BOXSTER & BOXSTER "S" FRONT THRU '04 ,CARRERA & 4 '99-'05 FRONT & REAR, CARRERA & 4 FROM '05 REAR, 911 TURBO '01-'05 FRONT & REAR PEX - LIST: $17.19

Hydraulic Fluid Hose

Hydraulic Fluid Hose (7.5 X 12.5 mm, Blue Cloth Braided) / Brake / Clutch Master Cylinder Control - METEOR - MSRP: $30.32
+ Unit: Per 1 Meter

CLUTCH DISC - SPORT - PORSCHE 996 / 986

Clutch Disc (Spring Hub Type) "Sport" w/Organic Lining, Higher Friction - PORSCHE 986 S / 996 / 996TT / GT2 / 997 - SACHS PERFORMANCE + Note: Compatible with special single mass lightweight flywheel.

Clutch Disc "Sport" Rigid Hub w/Organic Lining - (1990- )

Clutch Disc "Sport" Rigid Hub w/Organic Lining - (1990- ) 965 / 993 / S / 996 Turbo / 3.8L Club / RSR / Race Cars / GT2 - SACHS PERFORMANCE - MSRP: $NA
+ Also for use with DMF Dual Mass Flywheels

Clutch Pressure Plate Sport Race Euro RS Turbo S GT2

Clutch Pressure Plate - "Sport/Race" - Euro RS / Turbo S / GT2 / 3.8 RSR (Race Cars) / GT3 Cup - High Clampload Cover - Lightweight Aluminum - 9.50 Lbs. (4.31 Kg.) - SRE / SACHS PERFORMANCE, MSRP: $1807.20

Clutch Release Bearing - For European RS models

Clutch Release Bearing - For European RS models & cars with single mass flywheel conversion - PORSCHE 964 / 993 / 996 GT3 / 996 TURBO / 997 GT3 / 997 TURBO | OEM SACHS (3151 227 001) - MSRP: $229.44
+ 32mm updated type
+ Use with PN: 950 116 813 30 - Guide Tube for Clutch Release Bearing

Clutch Release Bearing G50 Standard

Clutch Release Bearing - (1987-2012) PORSCHE 911 / GT3 / Turbo G50 Type Transmissions - 32mm I.D. - OEM SACHS (3151 173 202), MSRP: $229.25
+ Note: (1987-1993) 911 Use PN: 950 116 813 06 - Updated 32mm Guide Tube Thru-11/92)

Starter Ring Gear - For Euro RS / Single Mass Flywheel

Starter Ring Gear - For Euro RS / Single Mass Flywheel - GENUINE PORSCHE - MSRP: $241.89

Clutch Friction Disc - Euro RS / GT3 / GT3 RS

Clutch Friction Disc - Euro RS / GT3 / GT3 RS (Only for Single Mass Flywheel) 240mm Torsion Hub Type - OEM SACHS (1862 323 031 / SD80373) - MSRP: $602.35

Clutch Pressure Plate 996 997 Turbo S GT2 GT2 RS GT3 GT3 RS

Clutch Pressure Plate - (2001-On) PORSCHE 996 - 997 Turbo / S / GT2 / GT2 RS / GT3 / GT3 RS - OEM SACHS (3082 213 136 / SC70284) - MSRP: $720.03

Clutch Pedal Spring (Power Spring)

Clutch Pedal Spring (Power Spring) - Purple Spring Type - GENUINE PORSCHE MOTORSPORT

+ Applies to 2000-2004 Porsche 986s / Boxster S
+ 1999 Porsche 996 Use also PN: 996 423 139 10 - Clutch Pedal

Wheel Bearing Front - Rear

WHEEL BEARING - FRONT/REAR -BOSXTER FROM '05 FRONT & REAR BOXSTER "S" THRU '04 REAR BOXSTER "S" FROM '05 FRONT & REAR CAYMAN & "S" FRONT & REAR CARRERA 4"S" '02-'05 FRONT CARRERA '99-''05 GT3 CUP FRONT 911 TURB0 '01-"05 FRONT CARRERA & S,4 FROM '05 FRONT
LIST $ 107.90

Wheel Bearing Rear

WHEEL BEARING - REAR - PORSCHE -911T 91-94 & 95-05, CARRERA, CARRERA 4 2 PER CAR - LIST: $98.52

ELE 0 258 006 MOT

OXYGEN SENSOR - 6 WIRE (TYPE LSU4) WIDE BAND OXYGEN SENSOR FOR RACING APPLICATION - USED WITH MOTEC OR ZYTECH MANAGEMENT SYSTEM - LIST: $226.79

Reverse Light Switch Porsche Transmission

REVERSE LIGHT SWITCH - MANUAL TRANSMISSION - PORSCHE - FROM 356 TO 97 TURBO
GENUINE - LIST: $96.43

ELE BQD-X

BATTERY DISCONNECT TERMINAL END KIT - SIMPLY UNSCREW THE GREEN KNOB TO DISCONNECT BATTERY POWER - A MUST FOR LESS FREQUENTLY DRIVEN CARS

ELE CREADER IV

DTC READER - DIAGNOSTIC TROUBLE CODE READER - OBD II & E OBD / INCLUDING CAN PROTOCOL *
Features:
1. LCD display
2. Display the content of trouble code
3. FREEZE FRAME function
4. Supporting CANBUS diagnosis
5. Manual reading code and clearing code

Specifications
1. LCD display(128*32), displaying by 2 lines, LED backlight
2. Two keys operation
3. Enclosed a disc, including most manufacturer code information. Now there is more than 7000 manufacturer codes, and it updates continuously.
4. Enclosed users' manual, including the explanation of trouble code before 1000 number.

ELE M880

COMPLETE MOTEC SYSTEM SOLUTIONS FOR PORSCHE MOTORSPORT APPLICATION - PLEASE CONTACT US FOR SYSTEM EVALUATION - THE APPLICATIONS GUIDE IS AVAILABLE FOR DOWNLOAD IN THE CATALOGS SECTION ON OUR WEBSITE

ELE RCX11862

MASTER DISCONNECT SWITCH - POWER - 6 POLE TYPE WITH ALTERNATOR - (FIA APPROVED) *Required for race cars


ALSO USED ON OUR BOXSTER SPEC RACING (BSR) CARS

ELE TIL 40-524

TILTON OIL / WATER PUMP - USED ON TRANSAXLE COOLER SYSTEMS - LIGHTWEIGHT - 3/8" NPT INLET / OUTLET - 12 VOLT - BUNA - INCLUDES BYPASS - 60 PSI WORKING PRESSURE - 1-2 GPM FLOW RATE

ELE UN6627400

HELLA AIR HORN SET - HIGH AND LOW TONE - INCLUDES ELECTRIC AIR PUMP & RELAY, COMPLETE KIT WITH HARDWEARE FOR INSTALLATION - LIST: $59.05

* A MUST FOR A FAST CAR IN SLOWER TRAFFIC !

Engine Mount

ENGINE MOUNT '90-'98 964 & 993 CLUB SPORT "RS" ENGINE MOUNT - PORSCHE- 2 PER CAR , MUST USE 2) BOLT # 900 082 030 02, AND 2) WASHER # 901 305 311 00 , LIST $ 202.30

Engine Mount Sport L

ENGINE MOUNT - LEFT - PORSCHE 911 TURBO '91-'94 / 911 CARRERA 4 THRU '94 TARGA / CABRIO / 911 CARRERA '95-'98 / CAN BE USED AS SPORT MOUNT (FIRMER RUBBER) ON C2 & C4 COUPE - CORTECO-CFW - LIST: $366.05

Engine Mount Sport R

ENGINE MOUNT - RIGHT - PORSCHE 911 TURBO '91-'94 / 911 CARRERA 4 THRU '94 TARGA / CABRIO / 911 CARRERA '95-'98 / CAN BE USED AS SPORT MOUNT (FIRMER RUBBER) ON C2 & C4 COUPE - CORTECO-CFW - LIST: $366.05

ROD BEARING SET - STANDARD - PORSCHE 993

ROD BEARING SET - STANDARD - PORSCHE 911 '95-'98 / 911 TURBO '96-97 / 911 TURBO '01-'05 - PACK OF 6 - GLYCO - LIST: $264.96

ENG 996 106 011 55

WATER PUMP ASSEMBLY - PORSCHE BOXSTER&"S" thru '04 CARRERA & CARRER"4" '99 THRU '05 - REQUIRES GASKET - PART NUMBER SUPERSEDED TO 996 106 011 55 - GENUINE - LIST: $313.85

ENG 996 106 013 59

THERMOSTAT KIT - INCLUDES UPDATED THERMOSTAT, HOUSING AND GASKET - PORSCHE BOXSTER / CAYMAN / 996 - WAHLER - LIST: $89.06

ENG 996 106 132 51

RADIATOR/RIGHT FRONT BOXSTER & S THRU '04, CARRERA '99 THRU '05, CARRERA 4 '99 THRU '01 CARRERA 4 '02 THRU '05 EXCEPT "S

ENG 996 106 665 57

WATER HOSE LEFT\RADIATOR UPPER, TO CENTER RADIATOR, BOXSTER S THRU 04' CARRERA & CARRERA 4 '99 THRU 05' TIPTRONIC

ENG 996 106 666 55

WATER HOSE\ RT RADIATOR (LOWER) TO CENTER RADIATOR,BOXSTER S THRU 04', CARRERA & CARRERA 4 '99THRU 05' TIPTRONIC

986 996 Engine Oil Cooler Heat Exchanger

Engine Oil Cooler Heat Exchanger - Porsche 996 All Except Turbo, 986 Boxster S - OEM BEHR, MSRP: $272.39

+ Use as high performance application to 1997-2004 Boxster 986 (Non S Models - M 96.20/22)

ENG 996 107 237 52

OIL SEPARATOR BOOT(BELLOWS) BOXSTER THRU '04, BOXSTER S THRU '04 , CARRERA & CARRERA 4 THRU 01'

ENG 999 070 362 40

O-RING FOR OIL SEPARATOR BOXSTER THRU '04, BOXSTER S THRU '04 , CARRERA & CARRERA 4 THRU 01'

ENG 999 707 389 40

O-RING FOR OIL COOLER 26 X 3 MM BOXSTER & BOXSTER S THRU 04' (2 PER CAR) CARRERA & CARRERA 4 '99 THRU 05' ( PER CAR) ,911 TURBO '01THRU 05' (4 PER CAR)

ENG 999 707 409 40

O-RING FOR OIL COOLER 26 X 3 MM BOXSTER & BOXSTER S THRU 04' (2 PER CAR) CARRERA & CARRERA 4 '99 THRU 05' ( PER CAR) ,911 TURBO '01THRU 05' (4 PER CAR)

EXH 99 1010 207

EXHAUST MUFFLER SET - SPORT - PORSCHE 911 '99-'05 - POLISHED STAINLESS STEEL - NOTE: ALSO USE TIP SET 99 1022 115 - TUV APPROVED - DANSK

EXH 99 1022 115

TIP SET - SPORT MUFFLER - PORSCHE 911 '99-'01 & DANSK MUFFLER EQUIPPED 911 '99-'05 - POLISHED STAINLESS STEEL - DANSK

Engine Oil Filter - WIX Racing

Engine Oil Filer - Spin On Type - WIX RACING (51060R) + Replacement for FRAM HP4

FIL 996 107 225 53 ML

FILTER KIT - ENGINE OIL - PORSCHE - FILTER CARTRIDGE AND HOUSING SEAL - MAHLE 0X128 D - LIST: $22.52

Brake Fluid Pentosin Racing

BRAKE-P/S FLUID - PENTOSIN RACING - EXCEEDS DOT 4 SPEC - 1 LITER
Pentosin Racing Brake Fluid especially appropriate for racing cars as well as for passenger cars with reduced cooling air flow; this fluid not only exceeds the DOT 4 specifications but as far as the boiling point is concerned, it also exceeds the 5.1 specifications.

Red Line Gear Oil 75W 90

GEAR OIL -REDLINE 75W 90 HIGH PERFORMANCE SYNTHETIC. IMPROVES DRIVE LINE EFFICIENCY FROM 2 TO 5 % PER QT

FLU MOBIL1-1550W

ENGINE OIL - MOBILE ONE - SYNTHETIC - 15W50 - PERFORMANCE-RACE APPLICATIONS - INCLUDES DISPOSAL FEE FOR OLD OIL

Flywheel Lightweight Single Mass 996 - 997

Flywheel - Sport Single Mass - (1999-2008) PORSCHE 996 & 997 - All Non-turbo Models - PATRICK MS USA
+ Includes: Pilot bearing, thrust plate & flywheel mounting bolts.
+ Assembly Weight: 12.50 Lbs. (5.67 Kg.)

+ 14.15 Lbs. (6.42 Kg.) Mass reduction compared to the original equipment, dual mass flywheel.

Flywheel Dual Mass 996 997

Flywheel - Dual Mass - 240M (1999-2008) PORSCHE 996 / 997 - OEM LUK (DMF024) - MSRP: $1177.35

Flywheel Dual Mass 996 Turbo

FLYWHEEL - DUAL MASS - PORSCHE 911 TURBO '96-'05 - MANUAL TRANSMISSION - LUK - LIST: $1238.93

Pilot Bearing For Standard Flywheel

PILOT BEARING - CRANKSHAFT - FOR STANDARD FLYWHEEL - PORSCHE 911 / TURBO '90-'05 CARRERA 95-98, CARRERA 2 THRU 94, CARRERA 4 90-98, GENUINE - LIST: $61.15

Fuel Pressure Regulator (4.0 bar)

Fuel Pressure Regulator (4.0 bar) - OEM BOSCH (078 133 534 C) - MSRP: $180.00
+ Replacement for original equipment regulators (3.8 Bar) found on (1995-On) PORSCHE, 993, Boxster & 996
+ Use for increased fuel enrichment on high performance engine applications.
+ For Adjustable Type, Use PN: FUE 5271

Fuel Pressure Regulator - Adjustable Type (1.7 to 5.4 bar)

Fuel Pressure Regulator - Adjustable Type 1.7 to 5.4 Bar (19 to 90 PSI) - Preset at 3.0 Bar (43.50 PSI) - BOSCH / PATRICK MS USA
+ Replacement for original equipment regulators (3.8 Bar) found on (1995-On) PORSCHE, 993, Boxster & 996
+ Use for increased fuel enrichment on high performance engine applications.

996 GT3 R Fuel Cell - 100mm Dry Break

FUEL CELL - PORSCHE 996 GT3R - PRO CELL - 100 MM DRY BREAK - FUEL SAFE - LIST: $7303.00

Rear Main Seal

Crankshaft Seal (Flywheel) 90 X 110 X 12 mm - PORSCHE - BLACK / ORANGE - ELRING - MSRP: $42.25

AN-12 Hose End - 45 Degree

HOSE END - AN-12 TO 45 DEGREE SWIVEL - ALUMINUM - GOODRIDGE

Union Adapter Fitting (M30 Male to AN-12 Male)

Union Adapter Fitting (M30 Male to AN-12 Male) - ST JIC-Metric - Billet Aluminum Anodized - GOODRIDGE, MSRP: $59.91

Adapter Fitting AN-16 Male To 30MM Female

Union Adapter Fitting (30mm Inverted Female to AN-12 Male) - Billet Aluminum - Hard Anodized - GOODRIDGE, MSRP: $41.69

Bolt - Flywheel to Clutch Pressure Plate (8 X 16 mm)

Bolt - Flywheel to Clutch Pressure Plate (8 X 16 mm) - 6 Per Car - GENUINE PORSCHE, MSRP: $0.91 / Each

Breather Hose Cloth Braided 24mm ID - Oil - Crank Ventilation

Breather Hose - 24mm I.D. - Cloth braided - Used for engine to oil tank - GERMAN
UNIT: .20 Qty. = 1 Meter

HAR 944 107 197 01

OIL DRAIN PLUG - ENGINE - 20 X 1.5MM MAGNETIC - PORSCHE - GENUINE - LIST: $12.95

HAR 993 103 174 02

NUT - CONNECTING ROD - PORSCHE 911 / TURBO - 12 PER CAR - GENUINE - LIST: $2.00

HAR 999 119 017 01

BOLT - FLYWHEEL - PORSCHE 911 '90-'98 & 968 '92-'95 - DUAL MASS TYPE - 10 X 1.25 X 62 MM - 9 PER CAR - GENUINE - LIST: $3.10

Bolt - G50 / 930 SBH Starter Ring Gear to Clutch Pressure Plate

Bolt - G50 / 930 SBH Starter Ring Gear to Clutch Pressure Plate (8 X 50 mm) - 9 Per Car - GENUINE PORSCHE - MSRP: $2.56

+ Features low profile head - Use with PATRICK MS G50 SBH Transaxle Conversions
+ Torque Specification: 24 Nm (18 Ft Lbs)

Bolt - Flywheel to Clutch Pressure Plate (8 X 40 mm)

Bolt - Flywheel to Clutch Pressure Plate (8 X 40 mm) - 9 Per Car - GENUINE PORSCHE - MSRP: $4.15

Wheel Stud M14x60MM

WHEEL STUD 14 X 1.5 X 60MM

Wheel Spacer Set 7mm

WHEEL SPACERS - 7MM - 911 914 930 986 993 996 997

INT93555-12BAPD

RACING HARNESS 5 PT KIT, 3", CAM,GN,BOLT ADJ.,PD SEWN LAP(BOLT) , GRAND NATIONAL STYLE. SHLDR(WRAP), SINGLE SUB (BOLT),SFI 16.1, BLACK

Oil Breather Catch Tank - 4.65 Inch (118mm) O.D.

Oil Breather Catch Tank - 4.65 Inch (118mm) O.D. - Lightweight Spun Aluminum with Internal Baffling - 2) AN-12 Female Ports & AN-06 Drain Plug - PETERSON FLUID SYSTEMS
+ Includes: Insulated Stainless Steel Mounting Strap

In Line Filter Oil-Fuel AN-08

SCAVENGE FILTER - AN-08 INLINE BILLET ALUMINUM FILTER, WE USE THIS ON ALL OUR TRANSMISSIONS COOLING SYSTEMS, IT KEEPS METAL FRAGMENTS FROM RUNNING THROUGH THE OIL PUMP, COOLER AND BACK INTO THE GEARS, OUCH ! YES, THIS IS A KEY INGREDIENT TO YOUR TRANSMISSIONS LONG LIFE - PETERSON FLUID SYSTEMS

Inline Filter - Oil / Fuel - AN-12

INLINE FILTER - OIL OR FUEL - STAINLESS STEEL FILTER ELEMENT RATED AT 60 MICRON OR .0023 INCH CAPTURE PARTICLE SIZE - AN-12 IN & OUT - BILLET ALUMINUM HOUSING - RED ANODIZED - PETERSON - LIST: $183.34

Adapter Fitting - (M22 to AN-08) - For ProLine Oil Coolers

Adapter Fitting - (M22 to AN-08) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $11.00

Adapter Fitting - (M22 to AN-10) - For ProLine Oil Coolers

Adapter Fitting - (M22 to AN-10) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $11.00

Adapter Fitting - (M22 to AN-12) - For ProLine Oil Coolers

Adapter Fitting - (M22 to AN-12) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $12.00

Adapter Fitting - (M22 to AN-16) - For ProLine Oil Coolers

Adapter Fitting - (M22 to AN-16) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $14.00

Setrab Oil Cooler Mounting Kit - 23-6002

SETRAB 6 SERIES OIL COOLER MOUNTING KIT, LIST $44.00

ProLine Mounting Bracket kits are lightweight rib-reinforced aluminum and Baja-tested. Hardy bulkhead mounting orientation incorporates 70A durameter dampening pads to completely isolate the cooler from vibration. Mounting brackets are sold in pairs, with all associated hardware.

Setrab Oil Cooler Mounting Kit

SETRAB 9 SERIES OIL COOLER MOUNTING KIT, LIST $ 50.00

ProLine Mounting Bracket kits are lightweight rib-reinforced aluminum and Baja-tested. Hardy bulkhead mounting orientation incorporates 70A durameter dampening pads to completely isolate the cooler from vibration. Mounting brackets are sold in pairs, with all associated hardware.

OIL SET50-110-7612

SETRAB OIL COOLER, SIZE 6-1/2" x 3" x 2", 22mm x 1.5, LIST $ 132.00 ***GREAT POWER STEERING & TRANS COOLER!

Oil Cooler | 6.42 x 3.93 x 1.83 Inch

SETRAB OIL COOLER, SIZE 6.42" x 3.93" x 1.83", 22mm X 1.5, LIST $ 146.00

Setrab Oil Cooler 911 - 930

Oil Cooler - 8.25 X 15.25 X 2.0 | M22 x 1.50 Ports - STD 1 Series - SETRAB, MSRP: $496.00

+ Rated for 300-400 HP Range | 29,000-40,000 BTU/Hr
+ Use with Spal PN: 30103013 - 5.2" Paddle Blade Low Profile Fan / 12V Pusher

* SHOWN WITH 45 DEG. FITTINGS & 22mm TO AN-12 UNIONS THAT ARE SOLD SEPARATELY

OIL SET50-619-7612

SETRAB OIL COOLER, SIZE 11.25" X 5.75" X 2.0", 22mm x 1.5, LIST $214.00

Setrab Oil Cooler 50-920-7612

SETRAB OIL COOLER, SIZE 16" x 6" x 2", 22mm x 1.5, LIST $ 256.00

Setrab Oil Cooler 50-925-7612

SETRAB OIL COOLER, SIZE 16" x 7-1/2" x 2", 22mm x 1.5, $ 320.00

Remote Oil Filter Console Mount Set - AN-12

Remote Oil Filter & Console Mount Set - Includes modular mounting bracket, fittings & filter kit - Billet Aluminum, Black Finish - SETRAB / WIX RACING / PATRICK MS USA
+ Includes 2) PN: 22-ORB10AN12-00 - Adapter fitting - AN-10 ORB female to AN-12 Male
+ Includes 1) PN: 51060R - WIX Racing Filter

Mount Set Solid

MOUNT SET - ENGINE / TRANSMISSION - SPORT / RACE - PORSCHE 911 / TURBO '91-'05 / GT2 / BOXSTER '97-'05 / CAYMAN - SOLID TYPE - BILLET ALUMINUM - ANODIZED - 1 SET PER CAR.

THIS MOUNT SET WILL GIVE YOU RESPONSIVE HANDLING AND BETTER TRACK FEEL THAN THE STOCK RUBBER MOUNTS

*RECOMMENDED FOR RACING USE- ALSO USED ON OUR BOXSTER SPEC RACING (BSR) CARS

-PATRICK MOTORSPORTS EXCLUSIVE --

PMP SB12175

STEEL WELD IN BUNG 12x1.75mm

Front Mount Oil Cooler - 500 COM - GT / RS / RSR - Competition Single Pass

Front Mount Oil Cooler - 500 COM - GT / RS / RSR - Competition Single Pass - 4x) 3/4 NPT Ports - Size: 23.50 x 5.50 x 2.25 Inches (59.69 x 13.97 x 5.72 cm) - Black Finnish - Includes Mounting Braces - SETRAB / PATRICK MS USA EXCLUSIVE
+ Specially Designed Production - Manufactured by Setrab of Sweden

* WE USE THIS COOLER ON ALL OUR HIGH PERFORMANCE & FULL RACE 914, 911, & 930 TURBO PROJECTS. THE SETRAB OIL COOLERS ARE ONE OF THE FINEST MADE, THEY ARE LIGHTWEIGHT AND THIS MEANS THEY COOL BETTER! THEY DISSIPATE OIL TEMPERATURE BETTER THAN MOST COMMON OIL COOLERS. THIS COOLER IS SET UP WITH 3/4" NPT FITTINGS 2) ON EACH END, THE FITTINGS SHOWN ARE NOT INCLUDED, BUT WE ARE ALSO A FULL LINE GOODRIDGE DISTRIBUTOR, ASK FOR THE PLUMBING HARDWARE FOR YOUR APPLICATION AND SEE IT IN USE ON MANY CARS IN THE "PROJECT" SECTION ON OUR SITE. ADDING AN EXTRA OIL COOLER TO YOUR PORSCHE WILL INCREASE PERFORMANCE AND LENGTHEN THE SERVICE LIFE OF YOUR ENGINE. THIS IS A SMALL INVESTMENT FOR HUGH PIECE OF MIND. PLEASE CALL FOR QUOTES ON ALL OUR OTHER SYSTEMS.

Battery Mount for Odyssey PC 925

Battery Carrier Mount - Designed For ODYSSEY PC 925 Batteries - Black Powercoated, Fabricated Steel - Includes Mounting Hardware Kit - PATRICK MS USA

WITH THIS MOUNT YOU CAN LOCATE THE BATTERY WHERE YOU NEED IT TO GET THE BEST WEIGHT DISTRIBUTION AND HOLD THE BATTERY SECURLY FOR ADDED SAFTEY.

Retractable Tow Hook for Porsche 911 & Boxster

RETRACTABLE TOW HOOK, FIT’S 964, 993, 986, 996, BOLT IN FITMENT REPLACING O.E. BUMPER SHOCK, 2)PER CAR, SAFETY RED POWDER COAT FINISH, TIG WELDED CONSTRUCTION & MADE BY PATRICK MOTORSPORTS

SETRAB OIL COOLERS

Patrick Motorsports is a stocking wholesale distributor for Setrab products. Setrab offers a wide variety of cooler types and sizes. Please download the catalog for application information or choose from our exclusively made sizes for Porsche cars. Feel free to contact us for other options.

SUS 996 333 021 K1

SPRING PERCH KIT - UPPER REAR - FOR USE WITH BILSTEIN PSS 9 / PMS 996TT BILLET CAMBER PLATE SET - BILLET ALUM. - BLACK ANO

996 997 C4 Turbo Front Camber Plate Strut Mount MonoBall

PORSCHE TYPE 996 C4 / 996TT - BILLET ALUM. MONOBALL FRONT CAMBER PLATE KIT - ALLOWS FOR 1 EXTRA DEG. NEGATIVE CAMBER - INCLUDES HARDWARE

986 996 997 Front Coil Spring Hat Set Bilstein PSS Systems

SPRING PERCH KIT - UPPER FRONT - FOR USE WITH BILSTEIN PSS 9 / PMS 996TT BILLET CAMBER PLATE SET - BILLET ALUM. - BLACK ANO

ERS Linear Tender Spring, 2.25 Inch I.D., 150 Lbs, 2.79 Inch Length

ERS Linear Tender Spring - 2.25 Inch I.D. / 150 Lbs. - 2.79 Inch Length - EIBACH

Main Spring - 6 Inch Length - 2.25 Inch I.D. / 350 Lbs

Main Spring - 6 Inch Length - 2.25 Inch I.D. / 350 Lbs. - EIBACH

Main Spring - 6 Inch Length - 2.25 Inch I.D. / 500 Lbs

Main Spring - 6 Inch Length - 2.25 Inch I.D. / 500 Lbs. - EIBACH

Eibach Springs

Eibach Springs - We inventory a wide variety of Eibach products. Main rate springs and progressive tender springs are available in 2.25 and 2.50 inch I.D. in a wide variety of lengths and rates. We also machine and inventory a wide variety of spring hardware for Porsche Coil Over Systems. Please contact us for packages and set up options.

Front Drop Link & Mounts Boxster / Cayman 996 997

Front Extended Drop Link & Mount Set - Longer type links with billet adjustable strut extension mounts. Application: PORSCHE Boxster / Cayman / 996 / 997 / All Models Including Turbo for threaded body dampers. Designed for compatibility to Bilstein PSS9 / Moton / JRZ Systems - TARETT *Please specify suspension system when ordering.

+ Compatible with all suspension systems including Bilstein / JRZ / Ohlins
+ Emulates the GT3 type drop link design. The custom attachment bracket allows for the drop link end to be connected to the strut at a higher location allowing for a longer drop link for improved geometry.
+ Left & right hand threaded rod ends allow for simple length adjustment to eliminate swaybar preload.
+ Used with our PORSCHE Boxster SPEC Racing (BSR) Cars

Spring Spacer Dividing Collar - Intermediate Inside Locating Ring

Spring Spacer Dividing Collar - Intermediate Inside Locating Ring - For use with 2.25 Inch Springs & M52 x 1.50 threaded body type dampers - Billet Aluminum / Mil-Spec Black Anodized - PATRICK MS USA - Each

TRA 000.044.700.26

SHORT SHIFT KIT – BILLET – PORSCHE 97 ON REDUCES SHIFT BY 35% BOXSTER AND BOXSTER "S" ALL, CAYMAN CAYMAN "S", CARRERA AND CARRERA 4 ALL, CARRERA S" FROM 2005, CARRERA S4 FROM 2006, AND 911 TURBO 2001 THRU 2005 (EXCEPT GT2)

USED ON OUR BOXSTER SPEC RACING (BSR) CARS

Synchro Ring (3rd-6th Gear) - Steel Motorsports Type

Synchro Ring (3rd-6th Gear) - Steel Motorsports Type - 964 Euro RS / 993 / GT2 / GT3 - GENUINE PORSCHE
+ Special Inventory
+ 3rd-6th Most models - Inquire for application

Clutch Release Bearing Fork G50

FORK - RELEASE BEARING FORK - FITS PORSCHE TRANSMISSIONS; 911 CARRERA G-50 '87-'89, CARRERA C-2 G-50 '90-'94, AND CARRERA 993 & TURBO G-50/21 '95-'98 - UPDATED TYPE - GENUINE
950 116 086 06 has been SUPERSEDED by the following: 997 116 086 90

Operating Shaft Kit

Clutch Shaft Bushing Kit - For Factory Modified Vehicles Using Late Style Shaft & Bushings / G50 Type Transmissions (1987-1998) - GENUINE, MSRP: $349.50
**NOTE: Some 1987-1989 G50 may require machine update. Use PN: 950 116 711 KIT
+ Contains: Bolt 900 075 057 03 x1; Shaft 950 116 710 04 x1; Bracket 950 116 713 02 x1; Plug 950 116 725 00 x1; Seal 999 113 418 40 x2; Bushing 999 201 339 00 x1; Bushing 999 201 365 00 x1 w/ Needle Bearings

SLAVE CYLINDER - PORSCHE G-50 TRANSMISSION

SLAVE CYLINDER - PORSCHE G-50 TRANSMISSION - PORSCHE 911 '87-'98 - SUPERSEDED FROM 950 116 237 11 - FTE-FAG - LIST: $168.19

Guide Tube for Clutch Release Bearing / RS Single Mass

Guide Tube for Clutch Release Bearing - For European RS models & cars with single mass flywheel conversion - GENUINE PORSCHE - MSRP: $131.76
+ 32mm type
+ Use with PN: 944 116 080 01 - Clutch Release Bearing

Shift Fork 1-2nd Gear Billet Aluminum G50 6-SPD

SHIFT FORK - 1ST-2ND GEAR - BILLET ALUMINUM - PORSCHE 993 1st TO 2nd SHIFT FORK, WE USE THIS ON ALL OUR HOT RACE PREP & MID-ENGINE 6 SPEED TRANSAXLE BUILDS - (1995-1998) 993 6 SPEED TRANS & 993 TURBO, THIS SHOULD BE LOOKED AT WHEN BUILDING A SHORT RATIO 993 RACE - AUTOCROSS BOX OR HIGH TORQUE APPLICATIONS LIKE FACTORY 5 GTM OR ULTIMA GT - GTR. LET US KNOW, WE BUILD THEM ALL RIGHT HERE !

Synchro Ring - 1st-2nd Gear G50 6-SPD

Synchro Ring - 1st-2nd Gear - G50 6 Speed / 993 / 996 / 997 / Turbo / GT2 / GT3 - GENUINE PORSCHE - MSRP: $158.54

LOCK NUT - TRANSMISSION MAIN / PINON SHAFT

LOCK NUT - TRANSMISSION MAIN / PINON SHAFT - PORSCHE 915 / G50 / G64 / G96 - LARGE NUT M30 X 1.50 - 1 OR 2 PER CAR - GENUINE - LIST: $9.80

Carrier Bearing for Differential - Left - 911 / 964 / 986 / 993 / 996

Carrier Bearing for Differential - Left - 911 / 964 / 986 / 993 / 996 - SKF - MSRP: $97.46

Shift Rod Linkage Cable End

Shift Rod Linkage Cable End - Billet Adjustable Fastener - Application to all 1997-On Boxster / 996 / 997 models - Direct replacement joint for the weak factory unit - Allows for more precise gear shifts.
+ Replaces OEM plastic shift linkage which has been prone to fail
+ Significantly Reduces Shifter Free Play

ALSO USED ON OUR BOXSTER SPEC RACING (BSR) CARS