(1995-1998) 3.6L H6 Turbo Parts
Top rated service.
Engine Pulley Kit - Single Belt 993
ENGINE PULLEY KIT - SINGLE BELT - LATER '95-'98 PORSCHE 3.6L ENGINES - STRAIGHT, NON TAPERED CRANKSHAFT TYPE - FOR USE WITH ENGINE CONVERSIONS TO 914, 911 AND RSR APPLICATIONS - KIT INCLUDES CRANKSHAFT PULLEY, ALTERNATOR FAN DRIVE HUB AND APPROPRIATE SIZE V-DRIVE BELT - DIRECT REPLACEMENT INSTALLATION
Item: PKG 36-993-ENGPK-SB ENG
Price: $398.00
Engine Mount Set Euro RS Sport 964 993
Engine Mount Set - Euro RS / Sport 964 / 993 - Lightweight Aluminum with RS sport rubber mount set and hardware set.
Item: PKG 964 375 043 KT
Price: $513.00
Solid Engine & Transmission Mount Set - 964 - 993
964 - 993 Solid Engine & Transmission Mount Set+ 1 Qty. Set Transmission Mounts - Left & Right solid plastic "Sport Version" - For manual transxales.
+ 1 Qty. Set Engine Mounts - Solid billet aluminum set, hard anodized, includes hardware.
This set suppresses judder powertrain movement for performance power transfer. Note: Application transmits sound and harmonics into the cockpit. Recommended for Motorsports use only.
Item: PKG 964 993 ET MS
Price: $448.00
Flywheel & Clutch Package RS / Turbo / GT2 / GT3
Lightweight, Single Mass Flywheel Conversion | For sporting and racing applications a reduction in the rotational mass of the flywheel and clutch assembly quickens engine acceleration and improves handling performance. As found on RS and GT models, the single mass lightweight flywheel is machined to exacting tolerances from solid steel thus reducing rotational mass by 17.90 Lbs. (8.12 Kg.)Coupled with the latest high performance OEM Sachs Performance clutch parts, this system offers high clamp load and durability for sport driving.
Pedal stiffness is only slightly increased and clutch engagement and control is easily modulated. Overall throttle response in sharpened and matching engine speeds becomes easier during performance downshifting.
Package Includes:
- Flywheel – Patrick Motorsports / RS Single Mass (13.75 Lbs. | 6.24 Kg.)
- Pilot Bearing – Porsche Sealed
- Starter Ring Gear – Porsche RS
- Clutch Cover – Sachs Performance GT2
- Clutch Disc – Sachs GT2
- Clutch Release Bearing – Sachs RS
- Guild Tube – Porsche RS
- Hardware Mounting Package
- Precision Balancing Service
RSR and Motorsport flywheel and clutch systems are also available upon request.
Item: PKG 964 993 RS FLW CLU
Price: $2145.00
Single Mass Flywheel Conversion Kit
Single Mass Flywheel Conversion Kit+ For use with Part Numbers: PMP 964 102 239 31 SM - RS Single Mass Flywheel & PMP 965 102 239 31 - M4P3 Single Mass Flywheel
Item: PKG 964 ERS SMC KIT
Price: $522.50
Brake Caliper Hardware Adapter Kit
Brake Caliper Fluid Delivery Hardware Set+ Use with caliper conversion kits for 90 Deg. inlets.
Item: PKG BRA 901 355 531
Price: $65.00
Transmission Cooler System - G50 930 915 901
TRANSAXLE COOLER SYSTEM, FIT'S 901 - 915 - 930 & ALL G-50 SERIES TRANSMISSIONS, OUR KIT INCLUDES THE FOLLOWING ITEMS,TILTON ELECTRIC TRANS OIL PUMP, PETERSON SCAVENGE DEBRIS FILTER, SETRAB OIL COOLER 50-119-7612, GOODRIDGE -8AN FITTINGS & HOSE, AND 3" AIR DUCT TO GET THE COOL AIR THROUGH THE COOLER. THIS IS THE BEST INSURANCE FOR YOUR EXPENSIVE RACE GEARBOX ! * SEE THIS KIT IN ACTION IN OUR "PROJECT GALLERY" ON ALL THE RACE CARS !
Item: PKG TRA OC KIT
Price: $628.00
Engine Oil Case Union Adapter - Inlet AN-16
Oil Inlet Case Union Adapter Kit - AN-16 to All 911 Engines - Billet Aluminum - PATRICK MS USA+ Includes new studs, hardware and seals.
Item: PMP 131-004
Price: $118.00
Flywheel Single Mass Conversion Euro RS / GT3
Flywheel - RS / Sport Single Mass (240mm) - 60-2 Timing Features - Application to: PORSCHE 964 / 993 / 996 / 997 / Turbo / RS / GT2 / GT3 - Billet Steel - PATRICK MS EXCLUSIVE - MSRP: $799.95+ Use with PN: PKG 964 ERS SMC KIT - RS Single Mass Flywheel Conversion Kit
+ Computer Balanced
"SAVES OVER 12 LBS. OVER THE O.E. DUAL MASS FLYWHEEL!"
Item: PMP 964 102 239 31 SM
Price: $536.00
11.00 LBs
Camshaft Cover Block Off Plate 964 - 993
CAMSHAFT BLOCK OFF PLATE - PORSCHE 3.6L '90-'98 ENGINES - CONVERSION OR POWER STEERING DELETE - LOW PROFILE FOR ADDITIONAL CLEARANCE - PATRICK MS USA EXCLUSIVE+ Replaces PN: 993 105 117 02 - Cover
+ Includes: 993 707 293 40 - O-Ring
Item: PMP36CAMBLOCK
Price: $78.00
Engine Conversion Harness 993 3.6L DME
ENGINE CONVERSION HARNESS - PORSCHE 911 / 914 / 964 CHASSIS INTERFACE TO 3.6L (993) '95-'98 ENGINE CONTROL UNIT - FEATURES NEW ORIGINAL EQUIPMENT CONNECTIONS, FUEL PUMP RELAY, OBD II SCAN PORT AND CHECK ENGINE LIGHT WIRE - PATRICK MOTORSPORTS EXCLUSIVE+ ALSO INCLUDES MODEL SPECIFIC CHASSIS JUMPER HARNESS FOR 911 CHASSIS
OUR HARNESSES MAKE YOUR ENGINE SWAPS A PLUG AND PLAY OPERATION, NO DAMMAGED COMPONANTS BY INCORRECT WIRING! ALSO RETAIN THAT FACTORY INSTALLED LOOK.
*ALSO INCLUDES 911 ENG. BAY JUMPER HARNESS
Item: PMP36ENGHAR95
Price: $388.00
964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive
964 - 993 RS Solid Hub for Air Cooling Impeller Fan Alternator Drive - Converts To Single Belt Drive - Ideal for Sport / Motorsport / Engine Conversions - Updated Reproduction of the Original Porsche Motorsport / Euro RS Unit - CAD Designed Lightweight Optimized - 6061-T6 Billet Aluminum Alloy - Mil Spec. Black Anodized - PATRICK MS USA+ Made for use with original or stud conversion hardware.
+ Replacement for PN: 964 106 051 30 - Original Fan Hub With Bearing
+ Reproduction of 911 Carrera RS Part Number: 993 106 051 80 – Wheel Hub for Engine Code: M64.20
Application Notes:
Fitment to all (1990-1998) 964 - 993 / Turbo 3.6L / 3.8L / RS / RSR Engines
This unit updates the original bearing hub and dual belt assembly to a simpler, single belt system. The united hub under-drives the alternator, reducing drag and allows the engine’s air cooling impeller to operate at the same speed for increased engine efficiency. Ideal use for performance engines running higher RPM ranges. The original equipment fan hub features a wearable bearing allowing the alternator and fan operate at independent speeds. The increased alternator speed is intended to produce additional current for electronic accessories. Higher alternator output may assist street models with additional electronic accessories. Recommended for high performance street, or motorsport use.
Item: PMP36FAN-HUB
Price: $140.00
Oil Pressure Sending Unit - Dual Pole
OIL PRESSURE SENDING UNIT CONVERSION - DUAL POLE TYPE FOR OIL PRESSURE AND WARNING LIGHT - FOR USE WITH ENGINE CONVERSIONS - INCLUDES SENDING UNIT AND ADAPTOR FITTING - 10 BAR TYPE – DON’T RISK ENGINE DAMAGE BY MISSING AN OIL PRESSURE DROP. INSTALL THIS WITH OUR LOW OIL PRESSURE WARNING LIGHT **PMPSLOPWL**AND SAVE YOUR MOTOR.*NOTE: DO NOT USE TEFLON TAPE - GROUND SOURCE
Item: PMP36OPSUKD
Price: $78.00
Spal Fan 5.2" Low Profile
5.2" Paddle Blade Low Profile Fan / 12V Pusher, VA31-A101-46S * 5.2"P/12V/SUM - SPAL USAThis fan works excellent with our line of Setrab Oil Coolers
Item: 30103013
Price: $78.00
Rocker Arm Shaft O-Ring Seal - 911 RSR
Rocker Arm Shaft O-Ring Seal - 911 RSR - Black Viton with rounded edges - PORSCHE MOTORSPORT / WRIGHTWOOD RACING - MSRP: $4.50 Each (24 Per Engine)+ Use on all engine rebuilds for (1965-1994) 911 / 914 / 930/ 964 / 965
+ Reduces the chance of leaks found at the lower valve covers. A must do for rebuilds on older worn cam housings.
Item: 911 099 103 52
Price: $3.00
Front Control Arm Bushing Set - 964 - 993
Control Arm Bushing Set - 964 / 993 / (1989) 911 Carrera 4 - Front Left / Right - JL / PATRICK MS USA - MSRP: N/A
Item: 964 341 017 PM
Price: $96.00
1.25 LBs
Cool Shirt Cool Water Shirts in Blue
COOL SHIRT - COOL WATER SHIRT - BLUE - *HANS DEVICE COMPATIBLE - AVAILABLE IN SMALL, MEDIUM, LARGE, X-LARGE AND XX-LARGE *PLEASE SPECIFY SIZE WHEN ORDERING
Item: ACC CS BCW
Price: $139.00
Cool Shirt Club System 24 Quart
COOL SHIRT - CLUB SYSTEM COMPLETE - 24 QUART -SEPARATELYThe Club 24 System comes with a 24qt cooling unit with an internal pump which supplies cooled water to the shirt through 8ft of double insulated hose with automatic shutoff / quick disconnects. The optional Temperature Control Switch gives the driver complete control of their comfort while in their race car. Total weight for the Club System is only 4lbs. Available options include the Temperature Control Switch, SFI-approved FireWear® fire-retardant Cool Shirt®, Universal Drain Kit, Emergency Pull-Release Connectors and Mounting Tray with strap.
The Club Systems are the most popular driver system manufactured. The Club System 24 combines the advantage of Cool Shirt®’s temperature-controlled cooling power with hours of cooling time.
Ideal for those racing applications where space is not as much of an issue and the races may run long. Versatile enough to be perfect for everything from road courses to oval track racing, the Club 24 System keeps you cool and alert for the entire race when going the distance really counts.
** COOL SHIRT SOLD SEPARATELY
Item: ACC CS CS-H-24 COOL SH
Price: $298.00
Cool Shirt - Temp Control Switch Kit
COOL SHIRT - TEMPERATURE CONTROL SWITCH - FLOW CONTROLLER
Item: ACC CS FC-1
Price: $160.00
Cool Shirt Firewear Cool Water Shirt - Large Short Sleeve
COOL SHIRT - FIREWEAR COOL WATER SHIRT - LARGE - SHORT SLEEVE *HANS DEVICE COMPATIBLE
Item: ACC CS FWS-SS-L
Price: $259.00
Cool Shirt Mounting Tray Kit for 24 Quart System
COOL SHIRT - MOUNTING TRAY AND STRAP SYSTEM FOR 24 QUART SYSTEM
Item: ACC CS MT-24
Price: $76.00
Cool Shirt Tube Connector Set
COOL SHIRT - SAFETY PULL RELEASE CONNECTORS SET - PAIR
Item: ACC CS PRC-2
Price: $48.00
Cool Shirt Pro Air & Water System - 24 Quart
COOL SHIRT - PRO AIR & WATER SYSTEM COMPLETE - 24 QUART - The Pro Air & Water System comes with a 24 quart cooling unit with an internal pump that supplies temperature-controlled cool water to the shirt and HEPA-4 filtered, chilled air to your helmet via a 235 CFM blower. Eight feet of double insulated water hose with automatic shutoff/quick disconnects attach the shirt to the unit, and the Dual Temperature Control Switch allows the user to regulate the flow and the temperature of water for personal comfort based on external temperature variation. Total weight on this system is only nine pounds.*COOL SHIRT IN SMALL-XX LARGE SOLD SEPARATELY
Item: ACC CS PSAW-H-24
Price: $990.00
Cool Shirt Connector & Drain Kit
COOL SHIRT - UNIVERSAL CONNECTOR AND DRAIN KIT - 6 PEICE KIT
Item: ACC CS UK-2
Price: $69.00
Photo Radar License Plate Shield
LICENSE PLATE SHIELD - "SUPER PROTECTOR" - NO TICKET ANTI-PHOTO PLATE PROTECTOR - DOMESTIC CAR - LIST: $39.95
Item: ACC LICSP-DC
Price: $34.00
ACC038-RAGGTOPP
RAGGTOPP FABRIC CONVERTIBLE TOP CLEANER AND PROTECTANT KIT - LIST: $34.99
Item: ACC038-RAGGTOPP
Price: $34.00
Computer Balancing
ROTATIONAL BALANCE OPERATIONS - CERTIFIED COMPUTERIZED BALANCING SERVICE+ SERVICE INCLUDED AT NO CHARGE WITH COMPLETE FLYWHEEL AND CLUTCH SYSTEMS
Item: BALANCING FLW CLU
Price: $67.50
Battery - ODYSSEY PC-925-A
Battery - ODYSSEY PC-925-A - 7.00D X 6.625W x 5.00T - 26 Lbs. - 925 Cranking Amps for 5 Secs. - Terminal: M6 for automotive - ENERSYS (0765-2024) - MSRP: $240.74
Item: BAT ODY PC 925
Price: $178.00
26.00 LBs
Latch Rubber Draw T-Handle
LATCH - RUBBER DRAW - SMALL T- HANDLE (69.0mm O.A.) - AIRCRAFT QUALITY WITH STAINLESS STEEL HARDWARE
Item: BOD 37065
Price: $15.50
BOD 37071
LATCH - RUBBER DRAW - MEDIUM T-HANDLE (86.5mm O.A.) - AIRCRAFT QUALITY WITH STAINLESS STEEL HARDWARE
Item: BOD 37071
Price: $16.00
License Plate Light
LICENSE PLATE LIGHT - 2 PER CAR - INCLUDES RUBBER MOUNTING GASKET KIT - CHROME - HELLA - LIST: $83.25
Item: BOD 63 26 8 777 PMS
Price: $48.50
Deck Lid Shock - Engine Strut
DECK LID SHOCK (ENGINE COVER)- PORSCHE - 2 PER CAR - 911, 912, 912E, CARRERA 2 & 4 THRU 98 - LIST $28.79
Item: BOD 911 512 331 02
Price: $26.00
Rubber Pad - 911 Door Sill Left
RUBBER STRIP PAD - LEFT SIDE DOOR SILL - PORSCHE 911 THRU '98 / 911 TURBO THRU '97 / 912/E - GENUINE - LIST: $38.97
Item: BOD 911 551 619 00
Price: $38.50
Rubber Pad - 911 Door Sill
RUBBER STRIP PAD - RIGHT SIDE DOOR SILL - PORSCHE 911 THRU '98 / 911 TURBO THRU '97 / 912/E - GENUINE - LIST: $39.15
Item: BOD 911 551 620 00
Price: $38.50
Porsche Hood Emblem Crest Kit - Gold Type
Porsche Hood Emblem Crest Kit - Gold Type - GENUINE PORSCHE+ Includes base seal and nut set
Item: BOD 996 559 211 KIT
Price: $127.00
0.16 LBs
BOD LIDPINKIT
DECK LID PIN KIT - HOLD DOWN SET INCLUDES SPECIALLY MACHINED DELRIN STRIKER DISCS, ALUMINUM PINS, AND LOCKING CLIPS - LIGHTWEIGHT - PATRICK MS EXCLUSIVE
Item: BOD LIDPINKIT
Price: $48.00
Lexan Door Window 911
911 LEXAN DOOR WINDOWS W- SLIDER OPENING, R&L SET.FOR RACE APPLICATIONS ONLY! (NOT LEGAL FOR STREET USE)
Item: BOD SPE911LWDGWSL
Price: $420.00
Quarter Window Set Rear Lexan
QUARTER WINDOW SET - REAR - FLUSH MOUNT - PORSCHE 911 / C2 / C4 / 993 - 1/8 TH INCH LEXAN FLAT RACE APPLICATIONS ONLY (NOT LEGAL FOR STREET USE)
Item: BOD SPE911QMR5
Price: $88.00
Quarter Window Set Rear Flush Mount 911
QUARTER WINDOW SET - REAR - FLUSH MOUNT - PORSCHE 911 / C2 / C4 / 993 - 3/16 INCH LEXAN FLAT RACE APPLICATION ONLY (NOT LEGAL FOR STREET USE)
Item: BOD SPE911QMR6
Price: $98.00
Quarter Window Hardware Kit
HARDWARE KIT - FLUSH MOUNT QUARTER WINDOW HARDWARE SET
Item: BOD SPE911QWHARD
Price: $18.00
Quarter Window Frame 911
QUARTER WINDOW FRAME SET - REAR - FLUSH MOUNT - PORSCHE 911 C2 / C4 / 993 - BLACK - REQUIRES FINAL FITMENT AND MOUNTING HARDWARE KIT
Item: BOD SPEF911Q1
Price: $138.00
Rear Quarter Window Set 911 Lexan
QUARTER WINDOW SET - REAR - NACA DUCT TO 3.00 INCH - PORSCHE 911 / C2 / C4 / 993 - 1/8TH INCH LEXAN - FIXED MOUNT TYPE - EXACT FIT
Item: BOD SPEW911NQ2
Price: $328.00
BOD SPEW911RASY2
REAR WINDOW ASSEMBLY - FLUSH MOUNT .1875 INCH THICK LEXAN - DROP IN READY WITH QUICK DISCONNECT FASTENERS. RACE APPLICATION ONLY (NOT LEGAL FOR STREER USE)
Item: BOD SPEW911RASY2
Price: $589.00
TILTON ADJUSTABLE BRAKE PROPORTION VALVE
TILTON ADJUSTABLE BRAKE PROPORTION VALVE - 7 POSITION LEVER TYPE - 10 MM X 1 MM PORT THREADS - ALUMINUM WITH BLACK ANODIZED FINNISH
Item: BRA 90-1003
Price: $108.00
0.80 LBs
SOCKET PIECE - 90 DEG. BRAKE BANJO FITTING
SOCKET PIECE - 90 DEG. BRAKE BANJO FITTING - PORSCHE - 10 MM x 1.0 MM - FOR CARS WITHOUT BRAKE BOOSTER - LIST: $18.88
Item: BRA 914 355 531 00
Price: $19.00
BRA 964 351 096 01
DAMPER SHIM - FRONT BRAKE PAD - 36 MM - PORSCHE -911 TURBO 91-94 96-97, CARRERA ,CARRERA 2, CARRERA 4, 4 PER CAR - GENUINE - LIST: $7.32
Item: BRA 964 351 096 01
Price: $7.30
BRA 965 351 096 00
DAMPER SHIM - FRONT BRAKE PAD - 44 MM -PORSCHE -911 TURBO 91-94 96-97, CARRERA, CARRERA 4,- 4 PER CAR - GENUINE - LIST: $4.54
Item: BRA 965 351 096 00
Price: $17.24
BRAKE LINE SET - STAINLESS STEEL BRAIDED - PORSCHE 933
BRAKE LINE SET - STAINLESS STEEL BRAIDED - PORSCHE 933 / TURBO '95-'98 - FRONT AND REAR SET - LIST: $131.90
Item: BRA 99 5522 107
Price: $126.00
BRAKE PAD SET - FRONT / REAR - PAGID RACING ORANGE RS4-4 - PORSCHE 911 CARRERA / 993
BRAKE PAD SET - FRONT / REAR - PAGID RACING ORANGE RS4-4 - PORSCHE 911 CARRERA / 993 TURBO REAR / 928 / 944 S2 / 944 TURBO / 968 - IDEAL FOR TOURING CAR, SHORT TRACK, LONG DISTANCE & SHOWROOM STOCK APPLICATIONS
Item: BRA 99 5541 532
Price: $246.00
BRAKE PAD SET - FRONT - PAGID RACING ORANGE RS4-4 - PORSCHE 993 TURBO
BRAKE PAD SET - FRONT - PAGID RACING ORANGE RS4-4 - PORSCHE 993 TURBO '95-'97- 911 C4/ S 928 from '92' IDEAL FOR TOURING CAR, SHORT TRACK, LONG DISTANCE & SHOWROOM STOCK APPLICATIONS
Item: BRA 99 5541 534
Price: $280.00
Brake Disc Rotor 993 Turbo - C4S - Front Left
Brake Disc Rotor - Front Left - 993 Turbo / Carrera 4S / M491 - OES GENUINE - MSRP: $307.49
Item: BRA 993 351 045 10
Price: $278.00
21.37 LBs
Brake Disc Rotor - Front Right - 993 Turbo / Carrera 4S / M491
Brake Disc Rotor - Front Right - 993 Turbo / Carrera 4S / M491 - OES GENUINE - MSRP: $307.49
Item: BRA 993 351 046 10 OES
Price: $268.00
21.37 LBs
BRA 993 351 421 00
BRAKE CALIPER - FRONT LEFT - PORSCHE 911 (993) '95-'98 - NON S MODEL - BLACK - GENUINE - LIST: $718.10
Item: BRA 993 351 421 00
Price: $710.00
Brake Caliper - Front Left - 993 Turbo (Big Red)
Brake Caliper - Front Left - (Big Red) - PORSCHE 911 (993) Turbo / C4 S / M491 Turbo Look - GENUINE PORSCHE - MSRP: $668.01
Item: BRA 993 351 425 10
Price: $668.00
9.00 LBs
Brake Caliper - Front Right - 993 Turbo (Big Red)
Brake Caliper - Front Right - (Big Red) - PORSCHE 911 (993) Turbo / C4 S / M491 Turbo Look - GENUINE PORSCHE / BREMBO - MSRP: $668.01
Item: BRA 993 351 426 10
Price: $668.00
BRAKE PAD SET - FRONT - PORSCHE 911 (993) S / Turbo
BRAKE PAD SET - FRONT - PORSCHE 911 (993) '95-'98 "S" / M491 TURBO LOOK / 911 (993) TURBO '96-'97 - GENUINE PORSCHE -
Item: BRA 993 351 949 00
Price: $215.00
BRAKE DISC - RIGHT REAR - PORSCHE 911 (993) C4S / Turbo
BRAKE DISC - RIGHT REAR - PORSCHE 911 (993) C4S 95 -98 / 911 (993TT) TURBO 96-97 - GENUINE - LIST: $182.60
Item: BRA 993 352 046 00
Price: $174.00
BRAKE CALIPER - REAR LEFT - PORSCHE 911 (993) TURBO / C4S
BRAKE CALIPER - REAR LEFT - PORSCHE 911 (993) TURBO '96-'97 / 911 C4 S / M491 TURBO LOOK '95-'98 - GENUINE - LIST: $ 571.24
Item: BRA 993 352 425 10
Price: $542.00
BRAKE CALIPER - REAR RIGHT - PORSCHE 911 (993) TURBO
BRAKE CALIPER - REAR RIGHT - PORSCHE 911 (993) TURBO '96-'97 / 911 C4 S / M491 TURBO LOOK '95-'98 - GENUINE - LIST: $571.24
Item: BRA 993 352 426 10
Price: $542.00
BRA 993 612 365 01
WEAR SENSOR - REAR BRAKE PAD - PORSCHE CARRERA '95 - '98 / CARRERA 4 '95 - '98 / 911 TURBO '96 - '97 - 2 PER CAR - LIST: $17.19
Item: BRA 993 612 365 01
Price: $16.61
BRA 993 612 368 00
WEAR SENSOR - FRONT BRAKE PAD LEFT OR RIGHT - PORSCHE 911 TURBO '93-'94 / 911 C4 S / M491 TURBO LOOK '95-'98 / 911 TURBO '96-'97 - GENUINE - 2 PER CAR - LIST: $17.19
Item: BRA 993 612 368 00
Price: $16.33
Parking Brake Shoe Set
PARKING BRAKE SHOE SET - PORSCHE - 911 TURBO '78-'94 CARRERA 2 & 4 THRU '94, 968, BOXSTER "S" THRU '04 BOXSTER FROM '05 CAYMAN CAYMAN "S" CARRERA AND CARRERA 4 CARRERA "4S" FROM '06 (1 SET PER CAR) - LIST: $155.09
Item: BRA 997 352 993 01
Price: $148.00
BOLT - BRAKE CALIPER - FRONT - PORSCHE 993 TURBO
BOLT - BRAKE CALIPER - FRONT - PORSCHE 993 TURBO '96-'98 - 12 X 77 MM - 4 PER CAR - GENUINE - LIST: $5.12
Item: BRA 999 067 042 09
Price: $5.00
Hydraulic Fluid Hose
Hydraulic Fluid Hose (7.5 X 12.5 mm, Blue Cloth Braided) / Brake / Clutch Master Cylinder Control - METEOR - MSRP: $30.32+ Unit: Per 1 Meter
Item: BRA 999 181 021 50 MET
Price: $15.00
0.10 LBs
BRA D 784 PS
BRAKE PAD SET - FRONT - PAGID SPORT BLUE - PORSCHE 993 C2 & C4 S / 993 TURBO / 928 GTS / 911 TURBO 3.6L '93-'98
Item: BRA D 784 PS
Price: $258.00
CLU 1864 483 031
CLUTCH DISC - RACE - PORSCHE 911 CARRERA / GT3 CLUB / RS / 3.8L RSR / CLUB / TURBO '90-'05 / GT2 - 4 PUCK METALLIC BRONZE DISC - 240 MM - 23 TEETH SPLINE - RIGID HUB - RATED AT 640 FT/LB WITH 883082 752 COVER - SACHS RACE ENGINEERING - LIST: $1012.91
Item: CLU 1864 483 031
Price: $728.00
Clutch Disc "Sport" Rigid Hub w/Organic Lining - (1990- )
Clutch Disc "Sport" Rigid Hub w/Organic Lining - (1990- ) 965 / 993 / S / 996 Turbo / 3.8L Club / RSR / Race Cars / GT2 - SACHS PERFORMANCE - MSRP: $NA+ Also for use with DMF Dual Mass Flywheels
Item: CLU 88 1864 001 098
Price: $675.00
Clutch Pressure Plate Sport Race Euro RS Turbo S GT2
Clutch Pressure Plate - "Sport/Race" - Euro RS / Turbo S / GT2 / 3.8 RSR (Race Cars) / GT3 Cup - High Clampload Cover - Lightweight Aluminum - 9.50 Lbs. (4.31 Kg.) - SRE / SACHS PERFORMANCE, MSRP: $1807.20
Item: CLU 88 3082 999 764
Price: $1060.00
Clutch Release Bearing - For European RS models
Clutch Release Bearing - For European RS models & cars with single mass flywheel conversion - PORSCHE 964 / 993 / 996 GT3 / 996 TURBO / 997 GT3 / 997 TURBO | OEM SACHS (3151 227 001) - MSRP: $229.44+ 32mm updated type
+ Use with PN: 950 116 813 30 - Guide Tube for Clutch Release Bearing
Item: CLU 944 116 080 01
Price: $178.00
1.15 LBs
Clutch Release Bearing G50 Standard
Clutch Release Bearing - (1987-2012) PORSCHE 911 / GT3 / Turbo G50 Type Transmissions - 32mm I.D. - OEM SACHS (3151 173 202), MSRP: $229.25+ Note: (1987-1993) 911 Use PN: 950 116 813 06 - Updated 32mm Guide Tube Thru-11/92)
Item: CLU 950 116 080 08
Price: $178.00
Starter Ring Gear - For Euro RS / Single Mass Flywheel
Starter Ring Gear - For Euro RS / Single Mass Flywheel - GENUINE PORSCHE - MSRP: $241.89
Item: CLU 964 114 143 31
Price: $168.00
CLU 964 116 014 63
CLUTCH DISC - 240 MM RIDGED HUB - PORSCHE 911 C2 / C4 '90-'98 / 911 TURBO '91-'97 - SACHS 1864 485 031 - LIST: $243.03
Item: CLU 964 116 014 63
Price: $218.00
CLU 964 116 028 53
PRESSURE PLATE - SACHS RACE ENGINEERING LIGHTWEIGHT / CUP CLUTCH - PORSCHE '911 TURBO 93-94 AND 96-97- SACHS 3082 213 031 - 9.63 LBS - LIST: $692.79
Item: CLU 964 116 028 53
Price: $657.00
CLU 993 423 171 00
MASTER CYLINDER - CLUTCH - PORSCHE 911 '90-'98 / TURBO '91-'92 - FTE-FAG - LIST: $120.57
Item: CLU 993 423 171 00
Price: $102.48
Clutch Friction Disc - Euro RS / GT3 / GT3 RS
Clutch Friction Disc - Euro RS / GT3 / GT3 RS (Only for Single Mass Flywheel) 240mm Torsion Hub Type - OEM SACHS (1862 323 031 / SD80373) - MSRP: $602.35
Item: CLU 996 116 015 32 SAC
Price: $396.00
Clutch Pressure Plate 996 997 Turbo S GT2 GT2 RS GT3 GT3 RS
Clutch Pressure Plate - (2001-On) PORSCHE 996 - 997 Turbo / S / GT2 / GT2 RS / GT3 / GT3 RS - OEM SACHS (3082 213 136 / SC70284) - MSRP: $720.03
Item: CLU 996 116 027 51
Price: $525.00
CLU KF 793 03
CLUTCH KIT - PORSCHE 911 TURBO 3.3L '91-'92 & 911 TURBO 3.6L '93-'98 SACHS - NOTE: REQUIRES 32 MM O.D. GUIDE TUBE 950 116 813 06 - LIST: $1793.07
Item: CLU KF 793 03
Price: $1242.08
Wheel Bearing Rear
WHEEL BEARING - REAR - PORSCHE -911T 91-94 & 95-05, CARRERA, CARRERA 4 2 PER CAR - LIST: $98.52
Item: DRI 999 053 055 02
Price: $96.00
ELE 0 258 006 MOT
OXYGEN SENSOR - 6 WIRE (TYPE LSU4) WIDE BAND OXYGEN SENSOR FOR RACING APPLICATION - USED WITH MOTEC OR ZYTECH MANAGEMENT SYSTEM - LIST: $226.79
Item: ELE 0 258 006 MOT
Price: $148.25
ELE 911 606 112 00
OIL TEMPERATURE SENDER - FOR GAUGE - PORSCHE 911 '74-'89 - LIST: $58.96
Item: ELE 911 606 112 00
Price: $35.38
Reverse Light Switch Porsche Transmission
REVERSE LIGHT SWITCH - MANUAL TRANSMISSION - PORSCHE - FROM 356 TO 97 TURBOGENUINE - LIST: $96.43
Item: ELE 914 613 541 02
Price: $86.79
Sending Unit for Oil Pressure Gauge - 0-5 Bar - Dual Pole
Sending Unit for Oil Pressure Gauge - 0-5 Bar - Dual Post - PORSCHE 911 / 924 S / 928 / 944 / 968 / Turbo - OEM CONTINENTAL VDO (360 081 030 03) + Includes (1) PN: 900 123 106 30 - Sealing Ring M18 x 24+ SUPERSEDED from PN: 928 606 203 01
Item: ELE 928 606 203 04 VDO
Price: $102.00
0.34 LBs
Distributor Cap 911 Carrera 964 / 993 Turbo
Distributor Cap - (1984-1989) 911 Carrera / (1991-1997) 964 / 993 Turbo - OEM BOSCH (03 008) - MSRP: $153.62 (Each)
Item: ELE 930 602 919 00 BOS
Price: $68.00
0.85 LBs
ELE 964 603 156 AX
ALTERNATOR - PORSCHE 911 CARRERA '91-'98 / 911 TURBO '91-'94 / 911 TURBO '96-'97 - REMANUFACTURED - BOSCH AL 0710 X - LIST: $1234.79 *CORE CHARGE $150.00
Item: ELE 964 603 156 AX
Price: $391.66
ELE 999 611 920 20
GROUND STRAP - TRANSMISSION TO BODY CHASSIS - 912E / 911 '72-'98 / 911 TURBO THRU '97 / EXCEPT TIPTRONIC - GENUINE - LIST: $17.10
Item: ELE 999 611 920 20
Price: $16.24
ELE BQD-X
BATTERY DISCONNECT TERMINAL END KIT - SIMPLY UNSCREW THE GREEN KNOB TO DISCONNECT BATTERY POWER - A MUST FOR LESS FREQUENTLY DRIVEN CARS
Item: ELE BQD-X
Price: $12.00
ELE CREADER IV
DTC READER - DIAGNOSTIC TROUBLE CODE READER - OBD II & E OBD / INCLUDING CAN PROTOCOL *Features:
1. LCD display
2. Display the content of trouble code
3. FREEZE FRAME function
4. Supporting CANBUS diagnosis
5. Manual reading code and clearing code
Specifications
1. LCD display(128*32), displaying by 2 lines, LED backlight
2. Two keys operation
3. Enclosed a disc, including most manufacturer code information. Now there is more than 7000 manufacturer codes, and it updates continuously.
4. Enclosed users' manual, including the explanation of trouble code before 1000 number.
Item: ELE CREADER IV
Price: $98.00
ELE DAV 1017-308FD
INTERCOOLER TEMPERATURE EFFICIENCY GAUGE - THIS GREAT TOOL WILL HELP YOU UNDERSTAND & MONITOR YOUR INTERCOOLER & WHEN IT'S COOLING AND WHEN IT'S HEAT SOAKED. WE STOCK THEM IN FAHRENHEIT, BUT CAN BE ORDERED IN CELSIUS. THIS GAUGE INDICATES INLET CHARGE AIR TEMPERATURES ALONG WITH OUTLET TEMPERATURES, & THEN CALCULATES THE TEMP. SPLIT FOR YOU AND SHOWS THE COOLING EFFICIENCY. WHEN THE SPLIT IS HIGH-TURN UP THE BOOST ! WHEN LOW SPLIT IS SHOWN, TIME TO EASE UP AND SAVE YOUR ENGINE ! THIS KIT INCLUDES THE GAUGE, 2 THERMOCOUPLES, AND HARNESS. SMALL COMPACT INSTALL SIZE OF 1.9" WIDE, 1.0" TALL, 2.25" DEEP.
Item: ELE DAV 1017-308FD
Price: $296.00
ELE M880
COMPLETE MOTEC SYSTEM SOLUTIONS FOR PORSCHE MOTORSPORT APPLICATION - PLEASE CONTACT US FOR SYSTEM EVALUATION - THE APPLICATIONS GUIDE IS AVAILABLE FOR DOWNLOAD IN THE CATALOGS SECTION ON OUR WEBSITE
Item: ELE M880
Price: $0.00
ELE RCX11862
MASTER DISCONNECT SWITCH - POWER - 6 POLE TYPE WITH ALTERNATOR - (FIA APPROVED) *Required for race carsALSO USED ON OUR BOXSTER SPEC RACING (BSR) CARS
Item: ELE RCX11862
Price: $48.00
ELE TIL 40-524
TILTON OIL / WATER PUMP - USED ON TRANSAXLE COOLER SYSTEMS - LIGHTWEIGHT - 3/8" NPT INLET / OUTLET - 12 VOLT - BUNA - INCLUDES BYPASS - 60 PSI WORKING PRESSURE - 1-2 GPM FLOW RATE
Item: ELE TIL 40-524
Price: $192.50
ELE UN6627400
HELLA AIR HORN SET - HIGH AND LOW TONE - INCLUDES ELECTRIC AIR PUMP & RELAY, COMPLETE KIT WITH HARDWEARE FOR INSTALLATION - LIST: $59.05* A MUST FOR A FAST CAR IN SLOWER TRAFFIC !
Item: ELE UN6627400
Price: $54.75
Engine Camshaft Set - 993 Super Sport Mechanical Rocker
Engine Camshaft Set - (993 Super Sport Mechanical Rocker) - PORSCHE 911 / 930 / 964 / 993 - SOHC 12V | 49mm O.D. Journals / 4 Bearing | #296 | New Billet Special Grind - WEB CAM - MSRP: $999.00+ Specify end drive requirements (P-S / Scavenge / Both)
Item: ENG 05-392
Price: $975.00
13.00 LBs
Engine Camshaft Set - 993 RS Euro
Engine Camshaft Set - (993 RS Euro) - PORSCHE 911 / 930 / 964 / 993 - SOHC 12V | 49mm O.D. Journals / 4 Bearing | #528 / 529 | New Billet Special Grind - WEB CAM - MSRP: $999.00+ Specify end drive requirements (P-S / Scavenge / Both)
+ If 993 Hydraulic, add labor PN: 95-002 - Machine oil groove in camshaft main
Item: ENG 05-442
Price: $975.00
13.00 LBs
Engine Camshaft Set - 993 GT2 EVO Mechanical Rocker Type
Engine Camshaft Set - (993 GT2 EVO Mechanical Rocker Type) - PORSCHE 911 / 930 / 964 / 993 - SOHC 12V | 49mm O.D. Journals / 4 Bearing | New Billet Special Grind - WEB CAM - MSRP: $999.00+ Specify end drive requirements (P-S / Scavenge / Both)
+ If 993 Hydraulic, add labor PN: 95-002 - Machine oil groove in camshaft main
Item: ENG 05-462
Price: $975.00
13.00 LBs
Engine Valve Spring Set - Sport / Racing
Valve Spring Set - Sport / Racing - 911 / 914 / 964 / 993 / Turbo - (Set of 24) - EIBACH / PATRICK MS USA+ 993 Applications use with: 12) 901 105 463 00 - Spring Seat & 1) ENG 911930-9-TIRET - TI Spring Retainer Set 9mm
Item: ENG 901 105 901 50 HP
Price: $535.00
1.70 LBs
OIL RETURN TUBE - SOLID - PORSCHE 911
OIL RETURN TUBE - SOLID - PORSCHE 911 THRU '98 / 911 TURBO THRU '97 - 4 PER CAR - GENUINE - LIST: $25.34
Item: ENG 901 107 351 01
Price: $19.50
TIMING CHAIN RAIL - LEFT - PORSCHE 911 / TURBO '90-'98
TIMING CHAIN RAIL - LEFT - PORSCHE 911 / TURBO '90-'98 - STRAIGHT - 1 PER CAR - GENUINE - LIST: $54.67
Item: ENG 964 105 029 00
Price: $47.00
TIMING CHAIN RAIL - RIGHT - PORSCHE 911 / TURBO
TIMING CHAIN RAIL - RIGHT - PORSCHE 911 / TURBO '90-'98 - STRAIGHT - 1 PER CAR - GENUINE - LIST: $44.48
Item: ENG 964 105 030 00
Price: $42.00
TIMING CHAIN RAIL - PORSCHE 911 CARRERA '90-'98
TIMING CHAIN RAIL - PORSCHE 911 CARRERA '90-'98 / 911 TURBO '93-'94 / 911 TURBO '96-'97 - CURVED - 2 PER CAR - GENUINE - LIST: $79.31
Item: ENG 964 105 043 02
Price: $69.00
TENSIONER - TIMING CHAIN - LEFT SIDE - PORSCHE 911 CARRERA 2 /4
TENSIONER - TIMING CHAIN - LEFT SIDE - PORSCHE 911 CARRERA 2 /4 '89-'98 / 911 TURBO '93-'97 - FEBI - LIST: $269.10
Item: ENG 964 105 079 00
Price: $215.28
TENSIONER - TIMING CHAIN - RIGHT SIDE - PORSCHE 911 CARRERA 2 /4
TENSIONER - TIMING CHAIN - RIGHT SIDE - PORSCHE 911 CARRERA 2 /4 '89-'98 / 911 TURBO '93-'97 - FEBI - LIST: $269.10
Item: ENG 964 105 080 00
Price: $238.00
Fan Hub with Bearing for Engine Cooling Fan
Fan Hub with Bearing for Engine Cooling Fan - PORSCHE (1990-1998) 964 / 993 - GENUINE PORSCHE - MSRP: $229.89
Item: ENG 964 106 051 30
Price: $229.00
Engine Oil Pump 964 993
OIL PUMP - ENGINE - PORSCHE 911 TURBO '93-'94 / 911 C2 / C4 / TURBO THRU '98 - GENUINE - LIST: $875.11 Superceeds to: 964 107 011 14
Item: ENG 964 107 011 11
Price: $1154.00
Engine Mount Sport L
ENGINE MOUNT - LEFT - PORSCHE 911 TURBO '91-'94 / 911 CARRERA 4 THRU '94 TARGA / CABRIO / 911 CARRERA '95-'98 / CAN BE USED AS SPORT MOUNT (FIRMER RUBBER) ON C2 & C4 COUPE - CORTECO-CFW - LIST: $366.05
Item: ENG 965 375 049 00 C
Price: $300.00
Engine Mount Sport R
ENGINE MOUNT - RIGHT - PORSCHE 911 TURBO '91-'94 / 911 CARRERA 4 THRU '94 TARGA / CABRIO / 911 CARRERA '95-'98 / CAN BE USED AS SPORT MOUNT (FIRMER RUBBER) ON C2 & C4 COUPE - CORTECO-CFW - LIST: $366.05
Item: ENG 965 375 050 00 C
Price: $330.00
Cylinder Head Stud (Engine Case)
Cylinder Head Stud (Engine Case) Fully Threaded Type - (24 Per Engine ) - GENUINE - MSRP: $47.55+ Replaces PN: 993 101 170 51
Item: ENG 993 101 170 53
Price: $47.00
0.15 LBs
ROD BEARING SET - STANDARD - PORSCHE 993
ROD BEARING SET - STANDARD - PORSCHE 911 '95-'98 / 911 TURBO '96-97 / 911 TURBO '01-'05 - PACK OF 6 - GLYCO - LIST: $264.96
Item: ENG 993 103 147 15
Price: $248.00
ENG 993 230 580 1270F
ROD SET - PORSCHE 993 - BILLET E4340 CHROME MOLY HEAT TREATED FORGING - PIN DIA. .905 / B E BORE 2.283 / LENGTH 5.00 / B E WIDTH .743 INCH - WEIGHT: 540 GRAMS - INCLUDES ARP 2000 TYPE ROD BOLTS - SET OF 6 - PAUTERADD THESE TO YOUR NEXT REBUILD, STRONGER THAT FACTORY WITH ARP BOLTS TO HELP STAND UP TO THE DEMANDS OF YOUR HIGH REVING ENGINES.
Item: ENG 993 230 580 1270F
Price: $1683.00
Engine Oil Pump - PORSCHE 911 GT2 / GT3 Cup / R / RS / Race Cars
Engine Oil Pump - PORSCHE 911 / 964 / 993 / 996 / 997/ GT2 / GT3 Cup / R / RS / Race Cars - GENUINE PORSCHE - MSRP: $1820.27
Item: ENG 996 107 007 94
Price: $1785.00
5.96 LBs
ARP Rod Bolt Set 911 & Turbo (9mm)
Rod Bolt Set - Pro Wave ARP 2000 Complete - Porsche 911, 9mm - Application: (1984-98) 911, (1978-98) 911 Turbo, ARP
Item: ENG ARP 6005
Price: $274.00
ENG HP10T8
8mm TITANIUM VALVE SPRING RETAINER - PORSCHE 911 '95-'98 - LIST: $19.75 EACHINSTALL THESE ON YOUR NEXT REBUILD FOR THE ADDED INSURANCE ON YOUR HIGH RPM ENGINES, THEY ARE STRONGER THAN STOCK AND LIGHTER SO YOU GET AN ADDED BONUS OVER STOCK.
LESS CHANCE OF BRAKAGE AND VALVE FLOAT.
Item: ENG HP10T8
Price: $18.50
Ni-Resist Ring Set - 100 mm Bore
Ni-Resist Ring Set - 100 mm Bore - CNC Machined Stainless Steel - PATRICK MS USAUse for all larger bore, high compression and elevated boost turbocharged engines requiring high integrity, interlocking seal between the cylinders and heads.
Fashioned after Porsche Motorsport / RSR Turbo 934 / 935 Flame Ring, Le Mans Ring and 935 Head Rings.
+ Application requires machined grooves in the cylinders and heads. PATRICK MOTORSPORTS engine machine shop services available.
Item: ENG NI RESIST 100MM
Price: $360.00
EXH 993 111 040 00 PS
SPORT MUFFLER SET - PORSCHE 993 '95-'97 - STAINLESS STEEL - 60MM TUBING - DANSK - TUV APPROVED - 33 LBS - LIST: $2195.00
Item: EXH 993 111 040 00 PS
Price: $1254.98
EXH 993 111 250 00 DPS
EXHAUST TAIL PIPE SET - PORSCHE 993 '95-'97 - POLISHED STAINLESS STEEL - NON S OFFSET - DANSK - LIST: $395.00
Item: EXH 993 111 250 00 DPS
Price: $368.92
EXH 993 111 250 10 DPS
EXHAUST TAIL PIPE SET - PORSCHE 993 C4S '96-'97 - POLISHED STAINLESS STEEL - SPECIAL OFFSET - DANSK - LIST: $395.00
Item: EXH 993 111 250 10 DPS
Price: $298.00
EXH 993 111 250 50 DPS
EXHAUST TAIL PIPE SET - PORSCHE 993 TWIN TURBO '95-'97 - LEFT AND RIGHT SET - POLISHED STAINLESS STEEL - DANSK - LIST: $395.00
Item: EXH 993 111 250 50 DPS
Price: $299.00
EXH 993-SUP-CUP
EXHAUST MUFFLER BYPASS RESONATOR SET - SUPER CUP - PORSCHE 993 - STAINLESS STEEL - INCLUDES TURN DOWN TIP SET AND HARDWARE
Item: EXH 993-SUP-CUP
Price: $855.00
Engine Oil Filter - WIX Racing
Engine Oil Filer - Spin On Type - WIX RACING (51060R) + Replacement for FRAM HP4
Item: FIL 51060R
Price: $17.50
FIL 993 107 203 03 ML
FILTER - ENGINE OIL - ON ENGINE - PORSCHE 911 C2 / C4 '95-'98 & TWIN TURBO '96-'97 - SMALLER - MAHLE 0C 229 - LIST: $20.24
Item: FIL 993 107 203 03 ML
Price: $15.00
FIL RU3130
K&N FILTER ELEMENT FOR 3.6L AIR FLOW METER, CLEANABLE / REUSABLE FILTER
Item: FIL RU3130
Price: $56.00
Brake Fluid Pentosin Racing
BRAKE-P/S FLUID - PENTOSIN RACING - EXCEEDS DOT 4 SPEC - 1 LITERPentosin Racing Brake Fluid especially appropriate for racing cars as well as for passenger cars with reduced cooling air flow; this fluid not only exceeds the DOT 4 specifications but as far as the boiling point is concerned, it also exceeds the 5.1 specifications.
Item: FLU 55 9520 109
Price: $24.00
Red Line Gear Oil 75W 90
GEAR OIL -REDLINE 75W 90 HIGH PERFORMANCE SYNTHETIC. IMPROVES DRIVE LINE EFFICIENCY FROM 2 TO 5 % PER QT
Item: FLU 83522 57904
Price: $16.00
FLU MOBIL1-1550W
ENGINE OIL - MOBILE ONE - SYNTHETIC - 15W50 - PERFORMANCE-RACE APPLICATIONS - INCLUDES DISPOSAL FEE FOR OLD OIL
Item: FLU MOBIL1-1550W
Price: $10.00
Flywheel Dual Mass Porsche 911 - 964 - 993
FLYWHEEL - DUAL MASS - PORSCHE 911 '90-'98 –CARRERA 2 THRU 94 CARRERA 4 90-98 CARRERA 95-98 USE 9X FLYWHEEL BOLTS: 999 119 017 01 - LIST: $1072.67
Item: FLW 964 114 012 02 FLYW
Price: $895.25
Flywheel Dual Mass 996 Turbo
FLYWHEEL - DUAL MASS - PORSCHE 911 TURBO '96-'05 - MANUAL TRANSMISSION - LUK - LIST: $1238.93
Item: FLW 996 114 012 50 FLYW
Price: $1094.12
Pilot Bearing For Standard Flywheel
PILOT BEARING - CRANKSHAFT - FOR STANDARD FLYWHEEL - PORSCHE 911 / TURBO '90-'05 CARRERA 95-98, CARRERA 2 THRU 94, CARRERA 4 90-98, GENUINE - LIST: $61.15
Item: FLW 999 052 169 00
Price: $58.00
Fuel Pressure Regulator (4.0 bar)
Fuel Pressure Regulator (4.0 bar) - OEM BOSCH (078 133 534 C) - MSRP: $180.00+ Replacement for original equipment regulators (3.8 Bar) found on (1995-On) PORSCHE, 993, Boxster & 996
+ Use for increased fuel enrichment on high performance engine applications.
+ For Adjustable Type, Use PN: FUE 5271
Item: FUE 0 280 160 575
Price: $98.00
0.10 LBs
Fuel Pressure Regulator - Adjustable Type (1.7 to 5.4 bar)
Fuel Pressure Regulator - Adjustable Type 1.7 to 5.4 Bar (19 to 90 PSI) - Preset at 3.0 Bar (43.50 PSI) - BOSCH / PATRICK MS USA+ Replacement for original equipment regulators (3.8 Bar) found on (1995-On) PORSCHE, 993, Boxster & 996
+ Use for increased fuel enrichment on high performance engine applications.
Item: FUE 5271
Price: $172.00
0.19 LBs
FUE 928 110 253 00
FUEL FILTER - MAHLE KL 21 - PORSCHE 911/928/944 - LIST: $42.52
Item: FUE 928 110 253 00
Price: $36.14
FUE 964 620 104 00
FUEL PUMP - ELECTRIC SILVER - BOSCH 0 580 464 058 - PORSCHE '90-'98 911 CARRERA - '89-'98 911 CARRERA 4 - '90-'98 911 CARRERA 2 - '95-'98 TURBO - LIST: $424.14
Item: FUE 964 620 104 00
Price: $410.50
964 993 Fuel Cell 17 Gallon
FUEL CELL - PORSCHE 911 '90-'98 - PRO CELL - 17 GALLON (65 LTR.) - .063" ALUMINUM - TIG WELDED CONTAINER - LOW FUEL LEVEL WARNING LIGHT INDICATOR - COLLECTOR - FUEL SAFE - LIST: $2655.27
Item: FUE SA102 FUEL SAFE FUE
Price: $2750.00
964 993 Fuel Cell 27 Gallon
FUEL CELL - PORSCHE 911 '90-'98 - PRO CELL - 27 GALLON (100 LTR.) - .063" ALUMINUM - TIG WELDED CONTAINER - LOW FUEL LEVEL WARNING LIGHT INDICATOR - COLLECTOR - FUEL SAFE - LIST: $2986.16
Item: FUE SA103
Price: $2798.00
964 993 Fuel Cell 32 Gallon
FUEL CELL - PORSCHE 911 '90-'98 - PRO CELL - 32 GALLON - .063" ALUMINUM - TIG WELDED CONTAINER - LOW FUEL LEVEL WARNING LIGHT INDICATOR - COLLECTOR - FUEL SAFE - LIST: $3367.58
Item: FUE SA104
Price: $3178.00
993 Fuel Cell 17 Gallon
FUEL CELL - PORSCHE 993 911 '95-'98 - PRO CELL - 17 GALLON (65 LTR.) - 100 MM DRY BREAK - FUEL SAFE - LIST: $5149.00
Item: FUE SA117
Price: $4892.00
Engine Block Gasket Set - 911 / Turbo
Engine Gasket Set - Engine Case (1978-1998) PORSCHE 911 / 930 - VICTOR REINZ, MSRP: $108.06+ Note:This kit comes with the original brown rear crankshaft seal. If the current OE black version is preferred, also order # 999 113 426 41
Item: GAS 930 100 901 04 VIC
Price: $54.00
Engine Block Gasket Set - 911 / Turbo Wright Wood
Engine Gasket Set - Engine Case (1978-1998) PORSCHE 911 / 930 - WRIGHTWOOD RACING - MSRP: $108.06
Item: GAS 930 100 901 04 WRI
Price: $106.00
Gasket Set - Engine Timing Chain Case 964 / 993
Gasket Set - Engine Timing Chain Case - PORSCHE 964 / 993 - WRIGHTWOOD RACING+ Contains: Cover Gaskets, Seal Washers, Nuts, Bridge O-Rings, Tensioner Cover Gaskets & O-Rings
Item: GAS 964 105 181 98 WRI
Price: $158.00
0.50 LBs
Transmission Gasket Set - G50 Type (1987-1998) Manual
Transmission Gasket Set - G50 Type (1987-1998) Manual - HAP (950 300 911 00) - MSRP: $177.64
Item: GAS 964 300 912 00
Price: $108.00
0.63 LBs
993 Engine Gasket Set - Cylinder Heads
Engine Gasket Set - Cylinder Heads - (1995-1998) PORSCHE 993 Carrera 3.6L / 3.8L / Turbo / All Models - Includes Exhaust Gaskets - VICTOR REINZ - MSRP: $769.48
Item: GAS 993 100 902 00
Price: $448.00
Rear Main Seal
Crankshaft Seal (Flywheel) 90 X 110 X 12 mm - PORSCHE - BLACK / ORANGE - ELRING - MSRP: $42.25
Item: GAS 999 113 426 41 E
Price: $28.00
AN-12 Hose End - 45 Degree
HOSE END - AN-12 TO 45 DEGREE SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-4512
Price: $26.00
Union Adapter Fitting (M30 Male to AN-12 Male)
Union Adapter Fitting (M30 Male to AN-12 Male) - ST JIC-Metric - Billet Aluminum Anodized - GOODRIDGE, MSRP: $59.91
Item: HAR 306-12-M30D
Price: $38.00
Adapter Fitting AN-12 Male To 30MM Female
Union Adapter Fitting (30mm Inverted Female to AN-12 Male) - Billet Aluminum - Hard Anodized - GOODRIDGE, MSRP: $41.69
Item: HAR 730-12DFEM
Price: $30.00
Adapter Fitting AN-16 Male To 30MM Female
Union Adapter Fitting (30mm Inverted Female to AN-12 Male) - Billet Aluminum - Hard Anodized - GOODRIDGE, MSRP: $41.69
Item: HAR 730-16DFEM
Price: $32.00
HAR 928 102 151 01
BOLT - FLYWHEEL TO CRANKSHAFT - M10 x 1.25 - PORSCHE 911 CARRERA 2 '92 EURO RS / PORSCHE 911 CARRERA '95-'96 EURO RS / 928 - 9 PER CAR - GENUINE - LIST: $ 3.71 *Tightening Torque Nm: 2 Stages, 1st Stage: 40 / 2nd Stage: 90, 65 ft lbs.
Item: HAR 928 102 151 01
Price: $3.65
Breather Hose Cloth Braided 24mm ID - Oil - Crank Ventilation
Breather Hose - 24mm I.D. - Cloth braided - Used for engine to oil tank - GERMANUNIT: .20 Qty. = 1 Meter
Item: HAR 930 107 394 5M
Price: $30.00
1.00 LBs
HAR 944 107 197 01
OIL DRAIN PLUG - ENGINE - 20 X 1.5MM MAGNETIC - PORSCHE - GENUINE - LIST: $12.95
Item: HAR 944 107 197 01
Price: $11.65
HAR 993 103 174 02
NUT - CONNECTING ROD - PORSCHE 911 / TURBO - 12 PER CAR - GENUINE - LIST: $2.00
Item: HAR 993 103 174 02
Price: $1.85
HAR 999 119 017 01
BOLT - FLYWHEEL - PORSCHE 911 '90-'98 & 968 '92-'95 - DUAL MASS TYPE - 10 X 1.25 X 62 MM - 9 PER CAR - GENUINE - LIST: $3.10
Item: HAR 999 119 017 01
Price: $2.98
Bolt - G50 / 930 SBH Starter Ring Gear to Clutch Pressure Plate
Bolt - G50 / 930 SBH Starter Ring Gear to Clutch Pressure Plate (8 X 50 mm) - 9 Per Car - GENUINE PORSCHE - MSRP: $2.56+ Features low profile head - Use with PATRICK MS G50 SBH Transaxle Conversions
+ Torque Specification: 24 Nm (18 Ft Lbs)
Item: HAR 999 510 012 PM
Price: $2.50
0.04 LBs
Bolt - Flywheel to Clutch Pressure Plate (8 X 40 mm)
Bolt - Flywheel to Clutch Pressure Plate (8 X 40 mm) - 9 Per Car - GENUINE PORSCHE - MSRP: $4.15
Item: HAR 999 510 015 02
Price: $2.50
Wheel Spacer Set 7mm
WHEEL SPACERS - 7MM - 911 914 930 986 993 996 997
Item: HAR14957161
Price: $92.24
HAR993 361 057 00
WHEEL LOCK SET - ALLOY WHEEL TYPE - PORSCHE - GENUINE - LIST: $58.55
Item: HAR993 361 057 00
Price: $58.00
IGN 911TPDIST36
DISTRIBUTOR - TWIN PLUG EARLY TYPE - FOR 30 MM CASE, SHAFT & GEAR FOR 3.6L ONLY - CLOCKWISE ROTATION - CNC MACHINED BILLET ALUMINUM - FASHIONED AFTER ORIGINAL RSR BOSCH UNITS - INCORPORATES A NEW WIDELY AVAILABLE MARELLI CAP
Item: IGN 911TPDIST36
Price: $1998.00
IGN 993 602 706 00
IGNITION CONTROL UNIT - PORSCHE 911 '94-'95 - ENGINE 3.6L - SUPERSEDED TO PART NUMBER: 993 602 706 01 - BOSCH - LIST: $212.95
Item: IGN 993 602 706 00
Price: $225.00
IGN 999 170 195 90
SPARK PLUG - BOSCH FR-6-LDC / 0 242 240 557 - LIST: $9.48
Item: IGN 999 170 195 90
Price: $6.58
IGN MSD 8202
IGNITION COIL - MSD BLASTER 2 - FOR USE WITH MSD 6AL CD IGNITION MODULE- RED HOUSING
Item: IGN MSD 8202
Price: $47.00
IGN MSD 8672
RPM MODULE - MSD 6000-8200 - FOR USE WITH MSD 6AL CD IGNITION - 2 REQUIRED FOR TWIN PLUG APPLICATIONS
Item: IGN MSD 8672
Price: $68.00
RSR Spark Plug Hold Downs for Twin Plug Porsche Engines
RSR Spark Plug Hold Downs for Twin Plug Porsche Engines, CAD plated with high temp rubber caps. 1 Set Per Engine = 6 Pieces+ Also available in singles each.
Item: IGN RSR SET
Price: $58.00
TPS - Throttle Position Sensor
THROTTLE POSITION SENSOR - COUNTER CLOCKWISE TYPE - GREY
Item: INJ TWM 2900 3040
Price: $81.00
TPS - Throttle Position Sensor Plug
THROTTLE POSITION SENSOR PLUG -
Item: INJ TWM 2900 3042
Price: $16.00
INT93555-12BAPD
RACING HARNESS 5 PT KIT, 3", CAM,GN,BOLT ADJ.,PD SEWN LAP(BOLT) , GRAND NATIONAL STYLE. SHLDR(WRAP), SINGLE SUB (BOLT),SFI 16.1, BLACK
Item: INT93555-12BAPD
Price: $173.02
Oil Breather Catch Tank - 4.65 Inch (118mm) O.D.
Oil Breather Catch Tank - 4.65 Inch (118mm) O.D. - Lightweight Spun Aluminum with Internal Baffling - 2) AN-12 Female Ports & AN-06 Drain Plug - PETERSON FLUID SYSTEMS+ Includes: Insulated Stainless Steel Mounting Strap
Item: OIL 08-0400
Price: $180.00
1.50 LBs
In Line Filter Oil-Fuel AN-08
SCAVENGE FILTER - AN-08 INLINE BILLET ALUMINUM FILTER, WE USE THIS ON ALL OUR TRANSMISSIONS COOLING SYSTEMS, IT KEEPS METAL FRAGMENTS FROM RUNNING THROUGH THE OIL PUMP, COOLER AND BACK INTO THE GEARS, OUCH ! YES, THIS IS A KEY INGREDIENT TO YOUR TRANSMISSIONS LONG LIFE - PETERSON FLUID SYSTEMS
Item: OIL 09-0401
Price: $54.00
Inline Filter - Oil / Fuel - AN-12
INLINE FILTER - OIL OR FUEL - STAINLESS STEEL FILTER ELEMENT RATED AT 60 MICRON OR .0023 INCH CAPTURE PARTICLE SIZE - AN-12 IN & OUT - BILLET ALUMINUM HOUSING - RED ANODIZED - PETERSON - LIST: $183.34
Item: OIL 09-0452
Price: $173.00
OIL 911 107 072 02
ENGINE OIL FILLER CAP - BAYONET TYPE - PORSCHE 911 '73-'98 / 911 TURBO THRU '97 - REUTTER - LIST: $12.53
Item: OIL 911 107 072 02
Price: $11.00
OIL 964 207 220 02
OIL COOLER - 964 & 993 FRONT OIL COOLER, MOUNTED IN RIGHT FRONT FENDER - FITS PORSCHE 964-993 '90-'98 / 993 TURBO '96-'97 -WE COMMONLY USE THEM ON THE LEFT SIDE AS WELL FOR SUPER EFFICIENT OIL COOLING LIKE THE RS & RSR, WE CAN SUPPLY THE OIL LINES FOR THIS CONVERSION, LET US KNOW IF WE CAN HELP, GENUINE - LIST: $493.66
Item: OIL 964 207 220 02
Price: $424.00
Adapter Fitting - (M22 to AN-08) - For ProLine Oil Coolers
Adapter Fitting - (M22 to AN-08) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $11.00
Item: OIL SET 22-M22AN08-SE
Price: $10.00
Adapter Fitting - (M22 to AN-10) - For ProLine Oil Coolers
Adapter Fitting - (M22 to AN-10) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $11.00
Item: OIL SET 22-M22AN10-SE
Price: $10.00
Adapter Fitting - (M22 to AN-12) - For ProLine Oil Coolers
Adapter Fitting - (M22 to AN-12) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $12.00
Item: OIL SET 22-M22AN12-SE
Price: $11.00
Adapter Fitting - (M22 to AN-16) - For ProLine Oil Coolers
Adapter Fitting - (M22 to AN-16) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $14.00
Item: OIL SET 22-M22AN16-SE
Price: $12.00
Setrab Oil Cooler Mounting Kit - 23-6002
SETRAB 6 SERIES OIL COOLER MOUNTING KIT, LIST $44.00ProLine Mounting Bracket kits are lightweight rib-reinforced aluminum and Baja-tested. Hardy bulkhead mounting orientation incorporates 70A durameter dampening pads to completely isolate the cooler from vibration. Mounting brackets are sold in pairs, with all associated hardware.
Item: OIL SET 23-6002
Price: $41.00
Setrab Oil Cooler Mounting Kit
SETRAB 9 SERIES OIL COOLER MOUNTING KIT, LIST $ 50.00ProLine Mounting Bracket kits are lightweight rib-reinforced aluminum and Baja-tested. Hardy bulkhead mounting orientation incorporates 70A durameter dampening pads to completely isolate the cooler from vibration. Mounting brackets are sold in pairs, with all associated hardware.
Item: OIL SET 23-9002
Price: $46.00
OIL SET50-110-7612
SETRAB OIL COOLER, SIZE 6-1/2" x 3" x 2", 22mm x 1.5, LIST $ 132.00 ***GREAT POWER STEERING & TRANS COOLER!
Item: OIL SET 50-110-7612
Price: $116.00
Oil Cooler | 6.42 x 3.93 x 1.83 Inch
SETRAB OIL COOLER, SIZE 6.42" x 3.93" x 1.83", 22mm X 1.5, LIST $ 146.00
Item: OIL SET 50-113-7612
Price: $128.00
Setrab Oil Cooler 911 - 930
Oil Cooler - 8.25 X 15.25 X 2.0 | M22 x 1.50 Ports - STD 1 Series - SETRAB, MSRP: $496.00+ Rated for 300-400 HP Range | 29,000-40,000 BTU/Hr
+ Use with Spal PN: 30103013 - 5.2" Paddle Blade Low Profile Fan / 12V Pusher
* SHOWN WITH 45 DEG. FITTINGS & 22mm TO AN-12 UNIONS THAT ARE SOLD SEPARATELY
Item: OIL SET 50-150-7612
Price: $435.00
OIL SET50-619-7612
SETRAB OIL COOLER, SIZE 11.25" X 5.75" X 2.0", 22mm x 1.5, LIST $214.00
Item: OIL SET 50-619-7612
Price: $188.00
Setrab Oil Cooler 50-625-7612
SETRAB OIL COOLER, SIZE 11.25" X 7.5" 2.0", 22mm X 1.5, LIST $260.00
Item: OIL SET 50-625-7612
Price: $228.00
Setrab Oil Cooler 50-920-7612
SETRAB OIL COOLER, SIZE 16" x 6" x 2", 22mm x 1.5, LIST $ 256.00
Item: OIL SET 50-920-7612
Price: $225.00
Setrab Oil Cooler 50-925-7612
SETRAB OIL COOLER, SIZE 16" x 7-1/2" x 2", 22mm x 1.5, $ 320.00
Item: OIL SET 50-925-7612
Price: $281.00
Harness Plug Connector Housing & Cover Set - Large 14 Pin Female Engine Harness
Electrical Harness Plug Connector Housing & Cover Set - Large 14 Pin Female Base & Cover to PORSCHE Engine Harness
Item: PKG 009 545 14 FM
Price: $32.00
Harness Plug Connector Housing & Cover Set - Large 14 Pin Male DME Harness
Electrical Harness Plug Connector Housing & Cover Set - Large 14 Pin Male Base & Cover to PORSCHE DME Harness
Item: PKG 009 545 14 LM
Price: $32.00
Oil Breather Catch Tank Set for Engine Crankcase & Transmission Ventilation
Oil Breather Catch Tank Set for Engine Crankcase & Transmission Ventilation+ Set Includes: Breather Catch Tank with Internal Baffles, Insulated Mounting Hardware, AN Adapter Fittings, Original Type Cloth Braided Hose with Hardware.
+ Ideal for engine and transaxle conversions and racing applications.
+ Tank equipped with dual breather ports for both engine and or transmission ventilation.
Item: PKG 911 914 OBS
Price: $275.00
930 3.6L Engine to Transmission Mounting Studs Short Bell Housing
Engine Case Stud Adapter Kit - Use to mount PORSCHE 915, G50 / 930 SBH (Short Bell Housing) 4 & 5 Speed Transmissions to (1978-1989) 930 Turbo 3.3L & (1990-On) 3.6L engine cases - Complete 4 Stud Set (M10) - GENUINE PORSCHE+ Application Notes: - Torque Spec: 45 Nm (33 ftlb)
Item: PKG 915 930 G50 SBH ECS
Price: $40.00
0.50 LBs
964 - 993 RSR Engine Oil Cooler System
RSR Engine Oil Cooler System - PORSCHE 964 - 993 - Front Left Fender Mount System for cars without AC - PATRICK MS USA
Item: PKG 964 207 220 PM
Price: $784.00
12.00 LBs
964 - 993 RS Engine Oil Cooler System - With AC
RS Engine Oil Cooler System - PORSCHE 964 / 993 / Turbo S Type Front Center / Left Mount System for cars with AC - PATRICK MS USA+ Application Notes: Mounts on lower left side, under aluminum bumper reinforcement.
Item: PKG 964 993 TS OC PM
Price: $498.00
12.00 LBs
993 Rear Suspension Carrier Mount Set
993 Rear Axle Suspension Carrier Mount Set - Solid Motorsport Type - (1994-1998) PORSCHE 993 / GT2 / RS / RSR - Set of 8 - Billet Aluminum - Mil Spec Black Anodized - PATRICK MS USA
Item: PKG 993 331 RCM
Price: $380.00
993 RS / GT2 / EVO Lightweight Wheel Carrier / Hub & T-Rod Package
993 RS / GT2 / EVO Front Axle Suspension Conversion - Lightweight Wheel Carrier / Hub & T-Rod Package - (1994-1998) PORSCHE 993 Carrera RS / GT2 / Race Cars (16.80 Lbs.)+ Includes New GENUINE PORSCHE MOTORSPORT Parts: Left / Right Wheel Carrier Front Hub / Steering Knuckle (Lightweight Upright) Set & Steering Tie Rod Assembly - Front Left / Right - 993 Carrera RS / GT2 (Race Cars)
+ Note: PN: 993 347 031 80 - Steering Tie Rod GT2 has be Superseded & is no longer available.
Item: PKG 993 340 RS WC
Price: $1650.00
16.86 LBs
Remote Oil Filter Console Mount Set - AN-12
Remote Oil Filter & Console Mount Set - Includes modular mounting bracket, fittings & filter kit - Billet Aluminum, Black Finish - SETRAB / WIX RACING / PATRICK MS USA+ Includes 2) PN: 22-ORB10AN12-00 - Adapter fitting - AN-10 ORB female to AN-12 Male
+ Includes 1) PN: 51060R - WIX Racing Filter
Item: PKG OIL FCS
Price: $140.00
Mount Set Solid
MOUNT SET - ENGINE / TRANSMISSION - SPORT / RACE - PORSCHE 911 / TURBO '91-'05 / GT2 / BOXSTER '97-'05 / CAYMAN - SOLID TYPE - BILLET ALUMINUM - ANODIZED - 1 SET PER CAR.THIS MOUNT SET WILL GIVE YOU RESPONSIVE HANDLING AND BETTER TRACK FEEL THAN THE STOCK RUBBER MOUNTS
*RECOMMENDED FOR RACING USE- ALSO USED ON OUR BOXSTER SPEC RACING (BSR) CARS
-PATRICK MOTORSPORTS EXCLUSIVE --
Item: PMP 993 375 101 80
Price: $368.00
PMP G-50 3RD 1.68
CLOSE RATIO 1.68 GEAR SET.SET YOUR GEAR BOX UP FOR THE TRACKS YOU RUN THE MOST AND PUT THE MOST POWER TO THE TRACK WHERE YOU NEED IT.
CALL FOR A COMPLETE QUOTE ON ALL OUR GEAR BOX AND DIFFERENTAL UPDATE CHOICES
Item: PMP G-50 3RD 1.68
Price: $895.00
PMP G-50 4TH 1.33
CLOSE RATIO 1.33 GEAR SETSET YOUR GEAR BOX UP FOR THE TRACKS YOU RUN THE MOST AND PUT THE MOST POWER TO THE TRACK WHERE YOU NEED IT.
CALL FOR A COMPLETE QUOTE ON ALL OUR GEAR BOX AND DIFFERENTAL UPDATE CHOICES
Item: PMP G-50 4TH 1.33
Price: $895.00
PMP G-50 5TH .923
5th GEAR SET .923SET YOUR GEAR BOX UP FOR THE TRACKS YOU RUN THE MOST AND PUT THE MOST POWER TO THE TRACK WHERE YOU NEED IT.
CALL FOR A COMPLETE QUOTE ON ALL OUR GEAR BOX AND DIFFERENTAL UPDATE CHOICES
Item: PMP G-50 5TH .923
Price: $895.00
PMP G-50 5TH .96
CLOSE RATIO .96 GEAR SETSET YOUR GEAR BOX UP FOR THE TRACKS YOU RUN THE MOST AND PUT THE MOST POWER TO THE TRACK WHERE YOU NEED IT.
CALL FOR A COMPLETE QUOTE ON ALL OUR GEAR BOX AND DIFFERENTAL UPDATE CHOICES
Item: PMP G-50 5TH .96
Price: $895.00
Flywheel Conversion 911 G50 to 964 993 3.6L DME 240mm
Flywheel - 964 & 993 3.6L DME Conversion to (1987-1989) G50-00 & G50-50 Transmissions (240mm) - 9 Bolt Crankshaft - (60-2 Timing Configuration) Steel, Weight: 10.25 Lbs. (4.65 Kg.) - PATRICK MS USA+ Certified Computer Balanced
+ Use with PN: 964 101 187 PM - Bracket Support for Engine Crankshaft Sensor
We also suggest this unit when using MoTeC or engine management systems with the G50-00 and G50-50 transmissions.
Item: PMP24036DMEFWG50
Price: $675.00
10.25 LBs
993 Air Injection Plug Block Off Set
993 Air Injection Port Plug Block Off Set - (1995-1998) PORSCHE 993 / Turbo 3.6L DME Engines - Installed in top left / right side of camshaft housings - PATRICK MS USA+ Includes specially designed billet screw plugs and seal ring sets.
The 993, 3.6L DME engines included a secondary air injection system consisting of an air pump assembly working with the catalytic converter system functioning to reduce emissions on engine start up. When installing and converting to the 993, 3.6L DME engines to older model cars, the pump assembly can be removed saving weight and complexity.
PLEASD DO NOT TRY USING GENERIC PLUGS INTO YOUR ALUMINUM CAM HOUSINGS FROM THE HARDWARE STORE YOU WILL JUST MAKE PROBLEMS WE DO NOT NEED.
Item: PMP36AIPP
Price: $18.00
0.30 LBs
Engine Crankshaft Pulley - 993 Single Belt RS / RSR Type
Engine Crankshaft Pulley - 993 / 3.6L Single Belt Conversion / RS / RSR - (1994-1998) PORSCHE 911 Carrera 2 / 4 - Billet Aluminum, Mil-Spec Black Anodized - PATRICK MS USA+ Replaces PN: 993 102 050 40
+ For 993 non-tapper end crankshaft
+ Use with PN: 900 378 124 01 - Hexagon Head Bolt
+ Use with: Belt 10x750
THE THREE GROVE STOCK PULLEY CANNOT BE USED ON THE 914 CONVERSTION THERE IS NOT ENOUGH ROOM. THESE PULLEYS ARE ALSO SMALLER, THIS WILL FREE UP POWER AND SLOW THE ALTERNATOR SPEED.
Item: PMP36CRPULA
Price: $238.00
0.70 LBs
Front Mount Oil Cooler - 500 COM - GT / RS / RSR - Competition Single Pass
Front Mount Oil Cooler - 500 COM - GT / RS / RSR - Competition Single Pass - 4x) 3/4 NPT Ports - Size: 23.50 x 5.50 x 2.25 Inches (59.69 x 13.97 x 5.72 cm) - Black Finnish - Includes Mounting Braces - SETRAB / PATRICK MS USA EXCLUSIVE+ Specially Designed Production - Manufactured by Setrab of Sweden
* WE USE THIS COOLER ON ALL OUR HIGH PERFORMANCE & FULL RACE 914, 911, & 930 TURBO PROJECTS. THE SETRAB OIL COOLERS ARE ONE OF THE FINEST MADE, THEY ARE LIGHTWEIGHT AND THIS MEANS THEY COOL BETTER! THEY DISSIPATE OIL TEMPERATURE BETTER THAN MOST COMMON OIL COOLERS. THIS COOLER IS SET UP WITH 3/4" NPT FITTINGS 2) ON EACH END, THE FITTINGS SHOWN ARE NOT INCLUDED, BUT WE ARE ALSO A FULL LINE GOODRIDGE DISTRIBUTOR, ASK FOR THE PLUMBING HARDWARE FOR YOUR APPLICATION AND SEE IT IN USE ON MANY CARS IN THE "PROJECT" SECTION ON OUR SITE. ADDING AN EXTRA OIL COOLER TO YOUR PORSCHE WILL INCREASE PERFORMANCE AND LENGTHEN THE SERVICE LIFE OF YOUR ENGINE. THIS IS A SMALL INVESTMENT FOR HUGH PIECE OF MIND. PLEASE CALL FOR QUOTES ON ALL OUR OTHER SYSTEMS.
Item: PMP500 COM 34NPT
Price: $640.00
8.50 LBs
Engine Oil Feed Pipe Adapter - 911 S Hose to 3.6L Engines
Engine Oil Feed Pipe - 964 / 993 3.6L Engine Conversion to (-1989) 911 / 930 Oil "S" Hose - Adapter to 30mm Union at Case Half Right - CAD Plated Steel with Hardware - PATRICK MS USA+ (1995-1998) 993 Applications use with PN: PKG 911 993 OFP - Engine case union adapter kit
Item: PMP91136OP
Price: $118.00
Battery Mount for Odyssey PC 925
Battery Carrier Mount - Designed For ODYSSEY PC 925 Batteries - Black Powercoated, Fabricated Steel - Includes Mounting Hardware Kit - PATRICK MS USAWITH THIS MOUNT YOU CAN LOCATE THE BATTERY WHERE YOU NEED IT TO GET THE BEST WEIGHT DISTRIBUTION AND HOLD THE BATTERY SECURLY FOR ADDED SAFTEY.
Item: PMPBATPC925BATM
Price: $98.00
1.50 LBs
Low Pressure Oil Light Kit 911
WARNING LIGHT - LOW OIL PRESSURE - DASH MOUNTED CLOCK REPLACEMENT - PORSCHE 911 '65-'98 - INCLUDES BLACK ANODIZED ALUMINUM BEZELDON’T DESTROY YOUR ENGINE BY MISSING THE DROP IN OIL PRESSURE WHEN YOU ARE BUSY ON THE ROAD OR TRACK THIS LIGHT WILL CATCH YOUR ATTENSION SO YOU CAN SHUT DOWN BEFORE YOU DAMMAGE YOUR ENGINE
-PATRICK MOTORSPORTS EXCLUSIVE --
Item: PMPLOPWL
Price: $58.00
Retractable Tow Hook for Porsche 911 & Boxster
RETRACTABLE TOW HOOK, FIT’S 964, 993, 986, 996, BOLT IN FITMENT REPLACING O.E. BUMPER SHOCK, 2)PER CAR, SAFETY RED POWDER COAT FINISH, TIG WELDED CONSTRUCTION & MADE BY PATRICK MOTORSPORTS
Item: PMPRTHL
Price: $110.00
Transmission Mount G50 Nose Cone Delrin
TRANSMISSION NOSE MOUNT SET - SOLID TYPE FOR '90-'94 G50 5 SPD. & '95-'98 G-50/21 6 SPD. TRANSMISSIONS - PORSCHE 911 CARRERA 2 '90-'94, 993 CARRERA '95-'98 - MACHINED DELRIN WITH ALUMINUM BUSHINGS.THESE MOUNTS WILL GIVE YOU MORE RESPONSIVE HANDLING AND MUCH BETTER ROAD FEEL.
THEY ALSO WILL NOT SETTLE OR COME APPART LIKE THE RUBBER ONES DO.
*RECOMMENDED FOR RACING USE
-PATRICK MOTORSPORTS EXCLUSIVE --
Item: PMPSTMG50NOSE
Price: $168.00
SETRAB OIL COOLERS
Patrick Motorsports is a stocking wholesale distributor for Setrab products. Setrab offers a wide variety of cooler types and sizes. Please download the catalog for application information or choose from our exclusively made sizes for Porsche cars. Feel free to contact us for other options.1, 6 & 9 Series Coolers Shown
Item: SETRAB OIL COOLERS
Price: $0.00
Momo Steering Wheel Hub Adapter
MOMO STEERING WHEEL ADAPTER HUB FOR PORSCHE BOXSTER 97-04, 944 ALL 85-89, 968 90-94, 911 90-04
Item: SUS 7004MOMO
Price: $85.00
Bearing Cartridge Ki
993 Rear Control Arm Monoball Bearing Cartridge Set - CNC machined billet steel, CAD plated. Includes high integrity self lubricating uniball bearings. 2 piece set for Left or Right upper / lower control arms. Also fits to upper control arms. Min 2 Qty sets per car. Direct replacement for worn, rubber bushings.+ Application to all PORSCHE 993 models.
Item: SUS 993 001
Price: $178.00
Kinematic Link Rear Suspension 993
KINEMATICS LINK - REAR - PORSCHE 993 - ADJUSTABLE - 2 PER CAR - HIGH QUALITY SELF LUBRICATED BEARINGS AND BILLET ALUMINUM / STAINLESS STEEL HARDWARE
Item: SUS 993 004
Price: $268.00
Toe Steering Link Rear Suspension 993
TOE STEERING LINK - REAR - PORSCHE 993 '95-98'- ADJUSTABLE - 2 PER CAR - HIGH QUALITY SELF LUBRICATED BEARINGS AND BILLET ALUMINUM / STAINLESS STEEL HARDWARE
Item: SUS 993 005
Price: $288.00
993 Rear Shock Mount Kit - Solid Monoball RS RSR
Monoball Rear Shock Mount Kit - Supporting mount assembly - (1994-1998) PORSCHE 993 / RS / RSR - CNC machined billet aluminum, hard anodized - Includes shock mounting hardware - MODE INC. / PATRICK MS USA+ Application to All 993 Models with motorsport threaded body dampers
Item: SUS 993 333 004 K1
Price: $485.00
964 993 Front Control Arm Bushing - Monoball Bearing Cartridge Set
Front Control Arm Monoball Bearing Cartridge Set - CNC machined billet aluminum, clear anodized. Includes high integrity self lubricating uni ball bearings. Complete 4 piece set for Left & Right lower control arms. Direct replacement for worn, rubber bushings.+ Application to all PORSCHE 964 / 993
Item: SUS 993 341 017 K1
Price: $935.00
993 Monoball Front Strut Mount Kit
Monoball Front Strut Mount Kit - Adjustable Camber Supporting Mount assembly with adjustable camber plate, CNC machined billet aluminum, hard anodized - Includes strut mounting hardware - MODE INC / PATRICK MS USA+ Application to All 993 / RS / RSR Models with motorsport threaded body dampers & Bilstein PSS Systems
Item: SUS 993 343 002 K1
Price: $595.00
SUS 993 RSSWBARKIT
993 RS/GT2 ANTI-SWAY BAR SYSTEM - FRONT/REAR - ADJUSTABLE - REQUIRES MS THREADED BODY SHOCKS
Item: SUS 993 RSSWBARKIT
Price: $1685.00
ERS Linear Tender Spring, 2.25 Inch I.D., 150 Lbs, 2.79 Inch Length
ERS Linear Tender Spring - 2.25 Inch I.D. / 150 Lbs. - 2.79 Inch Length - EIBACH
Item: SUS EIB 0175 225 0150
Price: $110.00
Main Spring - 6 Inch Length - 2.25 Inch I.D. / 350 Lbs
Main Spring - 6 Inch Length - 2.25 Inch I.D. / 350 Lbs. - EIBACH
Item: SUS EIB 0600 225 0350
Price: $100.00
Main Spring - 6 Inch Length - 2.25 Inch I.D. / 500 Lbs
Main Spring - 6 Inch Length - 2.25 Inch I.D. / 500 Lbs. - EIBACH
Item: SUS EIB 0600 225 0500
Price: $100.00
Eibach Springs
Eibach Springs - We inventory a wide variety of Eibach products. Main rate springs and progressive tender springs are available in 2.25 and 2.50 inch I.D. in a wide variety of lengths and rates. We also machine and inventory a wide variety of spring hardware for Porsche Coil Over Systems. Please contact us for packages and set up options.
Item: SUS EIBACH SPRINGS
Price: $0.00
Bilstein PSS10 Suspension Kit 993
BILSTEIN PSS10 Suspension System - THE NEW IMPROVED FRONT AND REAR COIL OVER TYPE SUSPENSION PACKAGE FOR PORSCHE 993 - MSRP: $4064.04Front and rear coil over shocks with springs. Ride height adjustable. 10 precise compression and rebound settings, from comfort to competition. Other PN: 48-132688
Item: SUS GM5 D268 HO
Price: $3148.00
Spring Spacer Dividing Collar - Intermediate Inside Locating Ring
Spring Spacer Dividing Collar - Intermediate Inside Locating Ring - For use with 2.25 Inch Springs & M52 x 1.50 threaded body type dampers - Billet Aluminum / Mil-Spec Black Anodized - PATRICK MS USA - Each
Item: SUS225SC
Price: $28.00
TRA 40 309 160
DIFFERENTIAL - QUAIFE ATB - FIT'S G-50 '87-'89 911 CARRERA, '89 911 TURBO, '90-'94 CARRARA 964, G-50/21 '95-'98 CARRERA 993, TRANSMISSIONS - NON FWD
Item: TRA 40 309 160
Price: $1648.00
Synchro Ring (3rd-6th Gear) - Steel Motorsports Type
Synchro Ring (3rd-6th Gear) - Steel Motorsports Type - 964 Euro RS / 993 / GT2 / GT3 - GENUINE PORSCHE+ Special Inventory
+ 3rd-6th Most models - Inquire for application
Item: TRA 928 304 211 RS
Price: $256.00
Clutch Release Bearing Fork G50
FORK - RELEASE BEARING FORK - FITS PORSCHE TRANSMISSIONS; 911 CARRERA G-50 '87-'89, CARRERA C-2 G-50 '90-'94, AND CARRERA 993 & TURBO G-50/21 '95-'98 - UPDATED TYPE - GENUINE950 116 086 06 has been SUPERSEDED by the following: 997 116 086 90
Item: TRA 950 116 086 06
Price: $238.00
Operating Shaft Kit
Clutch Shaft Bushing Kit - For Factory Modified Vehicles Using Late Style Shaft & Bushings / G50 Type Transmissions (1987-1998) - GENUINE, MSRP: $349.50**NOTE: Some 1987-1989 G50 may require machine update. Use PN: 950 116 711 KIT
+ Contains: Bolt 900 075 057 03 x1; Shaft 950 116 710 04 x1; Bracket 950 116 713 02 x1; Plug 950 116 725 00 x1; Seal 999 113 418 40 x2; Bushing 999 201 339 00 x1; Bushing 999 201 365 00 x1 w/ Needle Bearings
Item: TRA 950 116 086 KT
Price: $108.00
SLAVE CYLINDER - PORSCHE G-50 TRANSMISSION
SLAVE CYLINDER - PORSCHE G-50 TRANSMISSION - PORSCHE 911 '87-'98 - SUPERSEDED FROM 950 116 237 11 - FTE-FAG - LIST: $168.19
Item: TRA 950 116 237 12
Price: $114.00
GUIDE TUBE - CLUTCH RELEASE FOR 32MM ID RELEASE BEARING
GUIDE TUBE - CLUTCH RELEASE FOR 32MM ID RELEASE BEARING - PORSCHE 911 '87-'98 - GENUINE - LIST: $93.45
Item: TRA 950 116 813 06
Price: $79.90
Guide Tube for Clutch Release Bearing / RS Single Mass
Guide Tube for Clutch Release Bearing - For European RS models & cars with single mass flywheel conversion - GENUINE PORSCHE - MSRP: $131.76+ 32mm type
+ Use with PN: 944 116 080 01 - Clutch Release Bearing
Item: TRA 950 116 813 30
Price: $82.00
Shift Fork 1-2nd Gear Billet Aluminum G50 6-SPD
SHIFT FORK - 1ST-2ND GEAR - BILLET ALUMINUM - PORSCHE 993 1st TO 2nd SHIFT FORK, WE USE THIS ON ALL OUR HOT RACE PREP & MID-ENGINE 6 SPEED TRANSAXLE BUILDS - (1995-1998) 993 6 SPEED TRANS & 993 TURBO, THIS SHOULD BE LOOKED AT WHEN BUILDING A SHORT RATIO 993 RACE - AUTOCROSS BOX OR HIGH TORQUE APPLICATIONS LIKE FACTORY 5 GTM OR ULTIMA GT - GTR. LET US KNOW, WE BUILD THEM ALL RIGHT HERE !
Item: TRA 950 303 111 01 BLT
Price: $378.00
Shift Fork 3-4 Gear Billet Steel G50
Shift Fork 3-4th Gear (1987-1998) G50 5 & 6 Speed Transmissions - Billet Steel - PATRICK MS USA+ FOR USE ON ALL OUR HOT RACE PREP & MID-ENGINE 5 & 6 SPEED TRANSAXLE BUILDS / 1987-1989 / '95-'98 993 6 SPEED TRANSMISSIONS & 993 TURBOS - THIS SHOULD BE LOOKED AT WHEN BUILDING A RACE / AUTOCROSS GEARBOX OR FOR HIGH TORQUE APPLICATIONS SUCH AS THE FACTORY 5 GTM OR ULTIMA GT/GTR - PLEASE CONTACT US FOR A BUILD PACKAGE!
Item: TRA 950 303 113 04 BLT
Price: $678.00
Gear Teeth Syncro Hub
GEAR TEETH / SYNCRO HUB, FOR 993 '95-'98, 3RD THRU 6TH GEAR W-"BROACHED CENTER", LIST $ 288.00
Item: TRA 950 304 219 00
Price: $244.35
Synchro Ring - 1st-2nd Gear G50 6-SPD
Synchro Ring - 1st-2nd Gear - G50 6 Speed / 993 / 996 / 997 / Turbo / GT2 / GT3 - GENUINE PORSCHE - MSRP: $158.54
Item: TRA 950 304 611 20
Price: $117.00
LOCK NUT - TRANSMISSION MAIN / PINON SHAFT
LOCK NUT - TRANSMISSION MAIN / PINON SHAFT - PORSCHE 915 / G50 / G64 / G96 - LARGE NUT M30 X 1.50 - 1 OR 2 PER CAR - GENUINE - LIST: $9.80
Item: TRA 999 034 033 00
Price: $11.00
Mainshaft Bearing
BEARING - MAIN SHAFT MIDDLE - PORSCHE G50 / G64 / G96 TRANSMISSIONS - 4 POINT ANGULAR CONTACT TYPE - 30 X 62 X 16 MM - FAG - LIST $369.25
Item: TRA 999 052 094 00 FAG
Price: $332.00
Pinion Shaft Bearing
BEARING - PINION SHAFT - MIDDLE - PORSCHE 911 CARRERA '90-'98 / 911 TURBO '92-98'- FTE FAG OEM - LIST: $395.15
Item: TRA 999 052 164 00
Price: $238.00
Carrier Bearing for Differential 911 / 930 / 914 / 924 / 928 / 964 / 993
Carrier Bearing for Differential - Right / Left - 911 / 930 / 914 / 924 / 928 / 964 / 993 - (50 x 80 x 20 mm) - SKF (320I0X/QVB026) - MSRP: $82.45
Item: TRA 999 059 027 00 SKF
Price: $56.50
0.90 LBs
Carrier Bearing for Differential - Left - 911 / 964 / 986 / 993 / 996
Carrier Bearing for Differential - Left - 911 / 964 / 986 / 993 / 996 - SKF - MSRP: $97.46
Item: TRA 999 059 064 00
Price: $39.00
1.15 LBs
Transmission Main Shaft Nose Bearing 993
Transmission Main Shaft Nose Bearing - (1994-1998) PORSCHE 993 - Cylindrical-Roller Bearing 25x52x15 mm - O.E.M. - MSRP: $574.48
Item: TRA 999 110 194 01
Price: $395.00
0.33 LBs
Shift Joint Coupler 911 / G50
SHIFT JOINT COUPLER KIT - PORSCHE 911 '87-'89 / 911 TURBO '89 - G50 TRANSMISSION - DIRECT REPLACEMENT FOR ORIGINAL RUBBER TYPE COUPLER - WEVO - LIST: $254.00
Item: TRA WEVO PSJ G50
Price: $248.00
K24 Turbocharger Right 993 GT2 Turbo
TURBOCHARGER - K-24 - RIGHT - PORSCHE 911 TURBO '96-'97 - GT1 / GT2 - NEW - KKK BORG WARNER - LIST: $3995.00
Item: TUR 996 123 013 80
Price: $2788.00
K24 Turbocharger Left 993 GT2 Turbo
TURBOCHARGER - K-24 - LEFT - PORSCHE 911 TURBO '96-'97 - GT1 / GT2 - NEW - KKK BORG WARNER - LIST: $3995.00
Item: TUR 996 123 014 80
Price: $2788.00
