(1978-1983) 3.0L H6 NA SC Parts
Top Quality Service
911 914 Fuel System Conversion Kit to 964 - 3.6L
FUEL SYSTEM CONVERSION PACKAGE - PORSCHE 911/914 TO '90-'94 3.6L DME ENGINE - INCLUDES NEW LINES LEADING TO TANK - NEW MAHLE KL21 FILTER AND HARDWARE - FOR USE WITH FUEL PUMP: 964 620 104 00
Item: PKG 36L-FUSC-964 FUEL S
Price: $138.00
Porsche 911 RS Style Front Mount Oil Cooler Set
Porsche 911 RS Style Front Mount Oil Cooler Set - Supplement kit for cars with (1984-1989) 911 Carrera / 930 Turbo right front fender mounted oil coolers. Typical hose lengths: 2) Qty. Lines at 38 Inches (965mm) lengths.+ Use with front bumper with oil cooler duct opening.
+ Ideal for use on engine conversions, Turbo, sport and racing cars.
Item: PKG 911 107 FMOC
Price: $743.00
9.00 LBs
Porsche 911 930 RSR Style Front Mount Oil Cooler Set
Porsche 911 / 930 RSR Style Front Mount Oil Cooler Set - Supplement kit for cars with (1984-1989) 911 Carrera / 930 Turbo right front fender mounted oil coolers. Typical hose lengths: 38 Inches (965mm) & 65 Inches (1651mm)+ For use with front bumper covers with oil cooler duct opening.
+ Ideal for use on engine conversions, Turbo, sport and racing cars.
Item: PKG 911 107 FMOC RSR
Price: $976.00
12.00 LBs
Oil Breather Catch Tank Set for Engine Crankcase & Transmission Ventilation
Oil Breather Catch Tank Set for Engine Crankcase & Transmission Ventilation+ Set Includes: Breather Catch Tank with Internal Baffles, Insulated Mounting Hardware, AN Adapter Fittings, Original Type Cloth Braided Hose with Hardware.
+ Ideal for engine and transaxle conversions and racing applications.
+ Tank equipped with dual breather ports for both engine and or transmission ventilation.
Item: PKG 911 914 OBS
Price: $278.00
915 LW Clutch Kit KE
911 - 915 Clutch Set - (225mm) High Performance KEP Stage 1 - Street / Sport - Lightweight Aluminum Cover with Iron Facing - For 1972-1985 Porsche 911 Carrera / 915 Transaxle - 415 Lb/Tq Holding Capacity - 13.20 Lbs. (5.99 Kg.)
Item: PKG 915 116 LWA-I S1
Price: $1046.00
Clutch & Flywheel Package - 911 / 914 225mm
Clutch & Flywheel Conversion Package - Porsche 911 / 914 / 225 MM / 915 Transaxle to 3.6L 964 / 993 DME Engines - Patrick MS billet steel lightweight 225 MM DME (60-2 Tooth) conversion flywheel 9.60 Lbs, Sachs Power Clutch, 901 type pilot bearing, rear main seal and mounting hardware package - Suitable for engine conversions, sports / street and racing use.
Item: PKG 915 225 DME SPC-LW
Price: $1242.00
Brake Caliper Hardware Adapter Kit
Brake Caliper Fluid Delivery Hardware Set+ Use with caliper conversion kits for 90 Deg. inlets.
Item: PKG BRA 901 355 531
Price: $65.00
Tilton Brake Bias Adjuster Kit
Tilton Brake Pedal Bias Adjuster Kit - Includes billet cockpit adjustment knob and 90 Deg. coupler assembly. Great for use with the dual master cylinder assebly PN: BRA PMP911-930-DBMCL
Item: PKG BRA TIL BA
Price: $286.00
Transmission Cooler System - G50 930 915 901
TRANSAXLE COOLER SYSTEM, FIT'S 901 - 915 - 930 & ALL G-50 SERIES TRANSMISSIONS, OUR KIT INCLUDES THE FOLLOWING ITEMS,TILTON ELECTRIC TRANS OIL PUMP, PETERSON SCAVENGE DEBRIS FILTER, SETRAB OIL COOLER 50-119-7612, GOODRIDGE -8AN FITTINGS & HOSE, AND 3" AIR DUCT TO GET THE COOL AIR THROUGH THE COOLER. THIS IS THE BEST INSURANCE FOR YOUR EXPENSIVE RACE GEARBOX ! * SEE THIS KIT IN ACTION IN OUR "PROJECT GALLERY" ON ALL THE RACE CARS !
Item: PKG TRA OC KIT
Price: $628.00
Engine Oil Case Union Adapter - Inlet AN-16
Oil Inlet Case Union Adapter Kit - AN-16 to All 911 Engines - Billet Aluminum - PATRICK MS USA+ Includes new studs, hardware and seals.
Item: PMP 131-004
Price: $118.00
Air Intake Conversion Kit 914 6 to 993 3.6L
AIR INTAKE CONVERSION KIT - PORSCHE 914 6 CHASSIS TO 993 3.6L (1995) ENGINE - INCLUDES FORMED INTAKE BOOT, DELRIN PLUG PORT SET, DELRIN MAF SENSOR ADAPTOR TUBE, ADAPTER HOSE AND HARDWARE KIT. OUR INTAKE KITS WILL TOP OFF YOUR CONVERSTION FOR THAT FACTORY INSTALLED LOOK.THEY HAVE BEEN TESTED AND DESIGNED FOR THS APPLICATION TO MAXIMIZE AIR FLOW AND INCREASE HORSEPOWER. - FOR USE WITH CONE FILTER KIT: K&N RU-3130 (SOLD SEPARATELY)PATRICK MOTORSPORTS EXCLUSIVE--
ALWAYS USE OUR EXCLUSIVE PRODUCTS WHEN COMPLETEING YOUR ENGINE CONVERSIONS! THEY WILL SAVE YOU TIME AND MONEY OVER TRYING TO DEVELOP ONE FOR YOUR APPLICATION. WE HAVE SPENT THE TIME TO MAKE THE NEEDED COMPONENTS FOR YOUR PROJECT AS CLOSE TO FACTORY AS POSSIBLE AND IN MANY CASES EVEN NICER THAN THE FACTORY DID.
- PATRICK MOTORSPORTS EXCLUSIVE
Item: PMP 914-993-IBK
Price: $142.00
Flywheel 225mm Conversion to 964 - 993 3.6L DME Engines
Flywheel - Conversion 225mm / 901 / 915 Transmissions to 3.6L DME (964 / 993) Engines (60-2 tooth Timing Reference) - 9 Bolt Crankshaft - Sport Lightweight Single Mass - Billet Steel 9.65 Lbs (4.38 Kg.) - GENUINE PATRICK MS USA+ Use with PN: 901 102 025 01 - Pilot Bearing
+ Includes: Certified Rotational Balancing
Item: PMP22536DMEFW
Price: $398.00
9.60 LBs
Flywheel 911 RSR Sport 225mm Lightweight
Flywheel - RSR (225mm) - Sport Lightweight - (1978-1983) PORSCHE 911 Carrera / 915 Transmission - 9 Bolt Crankshaft - Billet Steel 6.25 Lbs. (2.84 Kg.) - PATRICK MS USA+ Computer Balanced
+ Includes: Sealed Pilot Bearing, 35mm
+ Replaces PNs: 930 102 204 03 & 930 102 215 00
Item: PMP2259LWFW
Price: $475.00
6.25 LBs
Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm
Flywheel - Sport Lightweight 3.6L DME Conversion - 240mm - 9 Bolt Crankshaft - (1978-1988) PORSCHE 930 Turbo 3.3L / 930 Trans & G50 SBH Trans - (60-2 Timing Configuration) - Billet Steel, Weight: 9.00 Lbs. (4.09 Kg.) - GENUINE PATRICK MS USA+ Includes: PN 931 102 111 00 - Sealed Pilot Bearing
+ Includes: Certified Rotational Balancing
+ Replaces PN: 930 102 202 01 - Flywheel (1978-1979) 930 Turbo - MSRP: $1,026.76
+ Replaces PN: 930 102 213 00 - Flywheel (1979-1988) 930 Turbo - MSRP: $1,074.85
This is an excellent choice for vehicles running or planning to convert to PORSCHE EFI equipped engines requiring a 60-2 tooth crankshaft reference / trigger sensor. Commonly the 60-2 timing configuration is used by modern PORSCHE cars starting with the 964, 3.6L DME models. Applications include AEM, Bosch Motronic, EFI Technologies, Electromotive, MoTeC, etc.
Item: PMP24036DMEFW
Price: $578.00
9.00 LBs
Camshaft Cover Block Off Plate 964 - 993
CAMSHAFT BLOCK OFF PLATE - PORSCHE 3.6L '90-'98 ENGINES - CONVERSION OR POWER STEERING DELETE - LOW PROFILE FOR ADDITIONAL CLEARANCE - PATRICK MS USA EXCLUSIVE+ Replaces PN: 993 105 117 02 - Cover
+ Includes: 993 707 293 40 - O-Ring
Item: PMP36CAMBLOCK
Price: $78.00
Ignition Coil Mount Adapter 993
COIL MOUNT ADAPTOR - TWIN IGNITION PORSCHE '95-'98 3.6L ENGINE - STEEL - WRINKLE BLACK POWDER COAT FINNISH - MOUNTS ON LEFT SIDE OF FAN HOUSING - FINISH OFF YOUR UPGRADE WITH ONE OF THESE MOUNTS AND IT WILL LOOK LIKE A FACTORY INSTALLED CONVERSION -PATRICK MOTORSPORTS EXCLUSIVE-
Item: PMP36COILMNT
Price: $98.00
Engine Conversion Harness 993 3.6L DME
ENGINE CONVERSION HARNESS - PORSCHE 911 / 914 / 964 CHASSIS INTERFACE TO 3.6L (993) '95-'98 ENGINE CONTROL UNIT - FEATURES NEW ORIGINAL EQUIPMENT CONNECTIONS, FUEL PUMP RELAY, OBD II SCAN PORT AND CHECK ENGINE LIGHT WIRE - PATRICK MOTORSPORTS EXCLUSIVE+ ALSO INCLUDES MODEL SPECIFIC CHASSIS JUMPER HARNESS FOR 911 CHASSIS
OUR HARNESSES MAKE YOUR ENGINE SWAPS A PLUG AND PLAY OPERATION, NO DAMMAGED COMPONANTS BY INCORRECT WIRING! ALSO RETAIN THAT FACTORY INSTALLED LOOK.
*ALSO INCLUDES 911 ENG. BAY JUMPER HARNESS
Item: PMP36ENGHAR95
Price: $388.00
Engine Badge 3.6L
3.6L ENGINE BADGE FOR REAR DECK LID GRILL, BILLET ALUMINUM & BLACK ANODIZED, COMPLETE WITH MOUNTING HARDWARE. "PATRICK MOTORSPORTS EXCLUSIVE"
Item: PMP36LBADGE
Price: $44.00
Oil Pressure Sending Unit - Dual Pole
OIL PRESSURE SENDING UNIT CONVERSION - DUAL POLE TYPE FOR OIL PRESSURE AND WARNING LIGHT - FOR USE WITH ENGINE CONVERSIONS - INCLUDES SENDING UNIT AND ADAPTOR FITTING - 10 BAR TYPE – DON’T RISK ENGINE DAMAGE BY MISSING AN OIL PRESSURE DROP. INSTALL THIS WITH OUR LOW OIL PRESSURE WARNING LIGHT **PMPSLOPWL**AND SAVE YOUR MOTOR.*NOTE: DO NOT USE TEFLON TAPE - GROUND SOURCE
Item: PMP36OPSUKD
Price: $78.00
Engine Badge 3.8L
3.8L ENGINE BADGE FOR REAR DECK LID GRILL, BILLET ALUMINUM & BLACK ANODIZED, COMPLETE WITH MOUNTING HARDWARE. "PATRICK MOTORSPORTS EXCLUSIVE"
Item: PMP38LBADGE
Price: $48.00
Shift Rod Adapter
Shift Rod Adapter Kit - G50 Short Bell Housing Transaxle to (1969-86) 911 & (1975-88) 911 / 930 Turbo - PATRICK MS USA+ Use with PN: 950 424 020 04 - Gear Shift Rod
Item: PMP911 930 G50 SBH
Price: $225.00
Dual Brake Master Cylinder System 911-930
Dual Master Cylinder Assembly with Bias Adjust Bar for (1977-1989) 911 / 930 Turbo (Power Brake) Models - Front / Rear Master Cylinders - FABCAR / PATRICK MS USA / TILTON+ Also for use in all early 911 models with minor chassis updates
+ CORE Charge $150.00 for original equipment brake master bearing bracket and reverse lever assembly.
LET US KNOW IF WE CAN HELP WITH THIS PRODUCT FOR YOUR CAR !
***RECOMMENDED FOR OFF MOTORSPORT USE***
Item: PMP911-930-DBMCL
Price: $1138.00
Roll Bar 911 930 Turbo Coupe
Roll Bar - 911 / 930 Coupe - 4 Point Weld In Stand Alone with Integral Harness Bar - Designed for all (1969-1989) 911 / 930 Turbo Coupe models (Not for Cabrio / Targa) - TIG Welded Construction with 1.75 x .120 Inch DOM Steel Tubing - PATRICK MS USA - CERTIFIED BATCH PRODUCTION+ Designed for motorsport use only.
+ Conforms to PCA and SCCA specifications.* Please check local racing regulations for updates before ordering.
+ Freight Domestic: $200-250 Range - Please contact us for current estimates or international shipping rates.
+ Custom finishing with powder coating: $100 Additional - Please contact us for options.
+ Please see our project gallery for installation images.
Item: PMP911-930-SARB
Price: $700.00
Accelerator Cable Conversion Kit - 911 / 930 to 3.6L DME
Accelerator Cable Conversion Kit - 911 / 930 to 3.6L DME Engines - Application to all (1990-1998) 964 / 933 3.6L DME Engines into All 911 / 930 Models - PATRICK MS EXCLUSIVE+ Includes adjustable Delrin bulk head fitting
+ Includes installation instructions
Item: PMP911-964-993TC
Price: $288.00
993TT Caliper Mount Adapter Set for 911 / 930 / 914-6
Brake Caliper Adapter Mount Set - Front - 993 Turbo "Big Red" / S2 Calipers to (1969-1989) 911 / 930 / 914-6 Stuts (Narrow or wide body cars with 3.50 Inch (88.9mm bolt spacing) - 7075 Billet Aluminum Mil-spec Black Anodized - PATRICK MS USA+ Includes 4x Caliper Mounting Bolts - Torque Spec: 85 Nm (63 ft lb)
+ Requires 17 Inch Wheels
Item: PMP911TTCM
Price: $200.00
Front Mount Oil Cooler 911 RS / 914-6 GT
Front Mount Oil Cooler - 911 RS / 914-6 GT Competition Dual Pass - 2x) AN-12 Feed / Return on same side - O.A.L. 21.50 Inches (546.10 mm) Cooling Area 17.75 x 4.25 x 1.90 Inch (450.85 mm x 107.95 mm x 48.26 mm) - Black Finnish - Includes mounting tabs - SETRAB / PATRICK MS USA EXCLUSIVE+ Specially Designed Production - Manufactured by Setrab of Sweden
** WE USE THIS COOLER ON MANY OF OUR HIGH PERFORMANCE AND RACE 914 & 911 PROJECTS, THE SETRAB OIL COOLERS ARE ONE OF THE FINEST MADE, THEY ARE LIGHTWEIGHT AND THIS MEANS THEY COOL BETTER! THEY DISSIPATE OIL TEMPERATURE BETTER THAN MOST COMMON OIL COOLERS, AND WE ARE A FULL LINE SETRAB DISTRIBUTOR, THE AN-12 FITTINGS SHOWN ARE INCLUDED AND ARE NOT REMOVABLE. WE ARE ALSO A FULL LINE GOODRIDGE DISTRIBUTOR, ASK FOR THE PLUMBING HARDWARE FOR YOUR APPLICATION AND SEE IT IN USE ON MANY CARS IN THE "PROJECT" SECTION ON OUR SIGHT.
ADDING AN EXTRA OIL COOLER TO YOUR PORSCHE WILL INCREASE PROFORMANCE AND LENGTHEN THE SREVICE LIFE OF YOUR ENGINE. THIS IS A SMALL INVESTMENT FOR HUGH PIECE OF MIND. PLEASE CALL FOR QUOTES ON ALL OUR OTHER SYSTEMS.
Item: PMP9146GTFOC
Price: $488.00
Spal Fan 5.2" Low Profile
5.2" Paddle Blade Low Profile Fan / 12V Pusher, VA31-A101-46S * 5.2"P/12V/SUM - SPAL USAThis fan works excellent with our line of Setrab Oil Coolers
Item: 30103013
Price: $78.00
Rocker Arm Shaft O-Ring Seal - 911 RSR
Rocker Arm Shaft O-Ring Seal - 911 RSR - Black Viton with rounded edges - PORSCHE MOTORSPORT / WRIGHTWOOD RACING - MSRP: $4.50 Each (24 Per Engine)+ Use on all engine rebuilds for (1965-1994) 911 / 914 / 930/ 964 / 965
+ Reduces the chance of leaks found at the lower valve covers. A must do for rebuilds on older worn cam housings.
Item: 911 099 103 52
Price: $3.00
Pipeline - Clutch Hydraulic Line At Pedals
Pipeline - Clutch hydraulic line at pedal assembly - (1987-1989) PORSCHE 911 Carrera G50 / (1989) 930 Turbo G50-50 - Custom bent 304 Stainless Steel with fittings - PATRICK MS USA, MSRP: $72.04 + Direct Replacement for PN: 911 423 197 00 - Hydraulic Pipeline
Item: 911 423 197 00 PM
Price: $58.00
Pipeline Adapter - Clutch hydraulic line in tunnel G50
Pipeline Adapter - Clutch hydraulic line In Tunnel - (1987-1989) PORSCHE 911 Carrera G50 / (1989) 930 Turbo G50-50 - Custom bent 304 Stainless Steel with fittings - PATRICK MS USA, MSRP: $135.99+ Direct Replacement for PN: 911 423 199 02 - Hydraulic Pipeline
+ Also used for G50 SBH - Short bell housing transmission conversions to all 911 / 930 models
Item: 911 423 199 02 PM
Price: $98.00
Gear Shift Knob (5-Speed) Gloss Black
Gear Shift Knob (5-Speed) Gloss Black - (1972-1986) PORSCHE 911 / 912 - DANSK, MSRP: $103.50
Item: 911 424 071 01 DAN
Price: $50.00
0.20 LBs
Gear Shift Knob (5-Speed) Matte Black
Gear Shift Knob (5-Speed) Matte Black - (1972-1986) PORSCHE 911 / 912 - DANSK, MSRP: $NA
Item: 911 424 071 01 MAT DAN
Price: $48.00
Bushing Set for Transmission Shift Rod Coupling
Bushing Set for Transmission Shift Rod Coupling - PORSCHE 901 / 915 / 930 Transmissions - Poly Graphite - PATRICK MS USA - MSRP: $3.85 Each
Item: 911 424 223 03 AFT
Price: $14.00
0.01 LBs
Exhaust Crossover Pipe 911 / 930
Exhaust Crossover Pipe - Heat Exchanger to Catalytic Converter - Replaces Early 2 Piece Versions (Polished Stainless Steel) - DANSK, MSRP: $939.22
Item: 930 111 169 05
Price: $258.00
Exhaust-Manifold Heat Exchanger
Exhaust Manifold Heat Exchanger - Polished Stainless Steel, Thick Flange - PORSCHE 911 (3.0L) & 930 Euro 1978-1983 - 2 Per Car - DANSK, MSRP: $1185.12+ (12.15 Lbs.)
Item: 930 211 025 02 DAN
Price: $988.00
Retainer Ring (Crush Ring) for Gear Shift Knob
Retainer Ring (Crush Ring) for Gear Shift Knob - (1974-1986) 911 | (1976) 912 | (1975-1979) 930 - GENUINE PORSCHE, MSRP: $8.48
Item: 999 532 003 00
Price: $8.50
Cool Shirt Cool Water Shirts in Blue
COOL SHIRT - COOL WATER SHIRT - BLUE - *HANS DEVICE COMPATIBLE - AVAILABLE IN SMALL, MEDIUM, LARGE, X-LARGE AND XX-LARGE *PLEASE SPECIFY SIZE WHEN ORDERING
Item: ACC CS BCW
Price: $139.00
Cool Shirt Club System 24 Quart
COOL SHIRT - CLUB SYSTEM COMPLETE - 24 QUART -SEPARATELYThe Club 24 System comes with a 24qt cooling unit with an internal pump which supplies cooled water to the shirt through 8ft of double insulated hose with automatic shutoff / quick disconnects. The optional Temperature Control Switch gives the driver complete control of their comfort while in their race car. Total weight for the Club System is only 4lbs. Available options include the Temperature Control Switch, SFI-approved FireWear® fire-retardant Cool Shirt®, Universal Drain Kit, Emergency Pull-Release Connectors and Mounting Tray with strap.
The Club Systems are the most popular driver system manufactured. The Club System 24 combines the advantage of Cool Shirt®’s temperature-controlled cooling power with hours of cooling time.
Ideal for those racing applications where space is not as much of an issue and the races may run long. Versatile enough to be perfect for everything from road courses to oval track racing, the Club 24 System keeps you cool and alert for the entire race when going the distance really counts.
** COOL SHIRT SOLD SEPARATELY
Item: ACC CS CS-H-24 COOL SH
Price: $298.00
Cool Shirt - Temp Control Switch Kit
COOL SHIRT - TEMPERATURE CONTROL SWITCH - FLOW CONTROLLER
Item: ACC CS FC-1
Price: $160.00
Cool Shirt Firewear Cool Water Shirt - Large Short Sleeve
COOL SHIRT - FIREWEAR COOL WATER SHIRT - LARGE - SHORT SLEEVE *HANS DEVICE COMPATIBLE
Item: ACC CS FWS-SS-L
Price: $259.00
Cool Shirt Mounting Tray Kit for 24 Quart System
COOL SHIRT - MOUNTING TRAY AND STRAP SYSTEM FOR 24 QUART SYSTEM
Item: ACC CS MT-24
Price: $76.00
Cool Shirt Tube Connector Set
COOL SHIRT - SAFETY PULL RELEASE CONNECTORS SET - PAIR
Item: ACC CS PRC-2
Price: $48.00
Cool Shirt Pro Air & Water System - 24 Quart
COOL SHIRT - PRO AIR & WATER SYSTEM COMPLETE - 24 QUART - The Pro Air & Water System comes with a 24 quart cooling unit with an internal pump that supplies temperature-controlled cool water to the shirt and HEPA-4 filtered, chilled air to your helmet via a 235 CFM blower. Eight feet of double insulated water hose with automatic shutoff/quick disconnects attach the shirt to the unit, and the Dual Temperature Control Switch allows the user to regulate the flow and the temperature of water for personal comfort based on external temperature variation. Total weight on this system is only nine pounds.*COOL SHIRT IN SMALL-XX LARGE SOLD SEPARATELY
Item: ACC CS PSAW-H-24
Price: $990.00
Cool Shirt Connector & Drain Kit
COOL SHIRT - UNIVERSAL CONNECTOR AND DRAIN KIT - 6 PEICE KIT
Item: ACC CS UK-2
Price: $69.00
Carrera Decal Sticker Set
DECAL SET - "CARRERA" LOWER SIDES LEFT AND RIGHT - VARIOUS COLORS AVAILABLE, PLEASE SPECIFY WHEN ORDERING - SPECIALLY MADE - ALLOW 1 WEEK FOR DELIVERY
Item: ACC DECAL CARRERA
Price: $200.00
Photo Radar License Plate Shield
LICENSE PLATE SHIELD - "SUPER PROTECTOR" - NO TICKET ANTI-PHOTO PLATE PROTECTOR - DOMESTIC CAR - LIST: $39.95
Item: ACC LICSP-DC
Price: $34.00
ACC038-RAGGTOPP
RAGGTOPP FABRIC CONVERTIBLE TOP CLEANER AND PROTECTANT KIT - LIST: $34.99
Item: ACC038-RAGGTOPP
Price: $34.00
Computer Balancing
ROTATIONAL BALANCE OPERATIONS - CERTIFIED COMPUTERIZED BALANCING SERVICE+ SERVICE INCLUDED AT NO CHARGE WITH COMPLETE FLYWHEEL AND CLUTCH SYSTEMS
Item: BALANCING FLW CLU
Price: $67.50
Battery - ODYSSEY PC-925-A
Battery - ODYSSEY PC-925-A - 7.00D X 6.625W x 5.00T - 26 Lbs. - 925 Cranking Amps for 5 Secs. - Terminal: M6 for automotive - ENERSYS (0765-2024) - MSRP: $240.74
Item: BAT ODY PC 925
Price: $178.00
26.00 LBs
Latch Rubber Draw T-Handle
LATCH - RUBBER DRAW - SMALL T- HANDLE (69.0mm O.A.) - AIRCRAFT QUALITY WITH STAINLESS STEEL HARDWARE
Item: BOD 37065
Price: $15.50
BOD 37071
LATCH - RUBBER DRAW - MEDIUM T-HANDLE (86.5mm O.A.) - AIRCRAFT QUALITY WITH STAINLESS STEEL HARDWARE
Item: BOD 37071
Price: $16.00
Mirror Set
Mirror Set - Convex - Lightweight Nylon Black - Left & right set with mounting hardware kit - SPA F1
Item: BOD 5120-BLACK-KT
Price: $316.00
License Plate Light
LICENSE PLATE LIGHT - 2 PER CAR - INCLUDES RUBBER MOUNTING GASKET KIT - CHROME - HELLA - LIST: $83.25
Item: BOD 63 26 8 777 PMS
Price: $48.50
BOD 901 531 935 20
DOOR GLASS FELT WITH CLIPS LEFT INNER 911 THRU 83 TARGA,THRU 89 COUPE, 912, 912E, 911 TURBO THRU 91 CARRERA 2 & 4 THRU 91 COUPE
Item: BOD 901 531 935 20
Price: $54.63
Door Glass Felt - 911 / Targa
DOOR GLASS FELT WITH CLIPS RIGHT INNER 911 THRU 83 TARGA,THRU 89 COUPE, 912, 912E, 911 TURBO THRU 91 CARRERA 2 & 4 THRU 91 COUPE
Item: BOD 901 531 936 20
Price: $55.00
911 Front Lower Spoiler Kit
Front Lower Spoiler Kit - (1974-1989) PORSCHE 911 Carrera / S / Speedster, GENUINE, MSRP: $554.54
Item: BOD 911 503 995 00
Price: $298.00
3.55 LBs
Gas Hood Strut 911
STRUT - GAS FILLED FRONT HOOD STRUT - PORSCHE 911 '74-'89 - HIGH PRESSURE, HEAVY DUTY TYPE - 2 PER CAR - LIST: $29.25
Item: BOD 911 511 331 01
Price: $23.50
Hood Seal - Front Bonnet 911 / 912 / 930
HOOD SEAL - WEATHERSTRIP - PORSCHE 911 '74-'89 / 912E / 911 TURBO THRU '89 - GENUINE - LIST: $96.01
Item: BOD 911 511 923 02
Price: $77.00
Deck Lid Seal - 911 - 912 - 930
Decklid Seal - O.E.M. - MSRP: $53.15
Item: BOD 911 512 129 00
Price: $40.00
Deck Lid Shock - Engine Strut
DECK LID SHOCK (ENGINE COVER)- PORSCHE - 2 PER CAR - 911, 912, 912E, CARRERA 2 & 4 THRU 98 - LIST $28.79
Item: BOD 911 512 331 02
Price: $26.00
Door Seal - Left / Right Weather Strip
DOOR SEAL - LEFT OR RIGHT WEATHERSTRIP - PORSCHE 911 THRU '94 / 912 / 912E / 911 TURBO THRU '94 - 2 PER CAR - GENUINE - MSRP: $141.31
Item: BOD 911 531 095 02
Price: $110.00
Door Seal 912 -911 Targa
SEAL - DOOR - PORSCHE 912 TARGA, 911 & TURBO THRU '94 TARGA / CABRIO/CARRERA 2 & 4 CABRO AND TARGA THRU 94- LEFT OR RIGHT - 2 PER CAR - GENUINE - LIST: $87.78
Item: BOD 911 531 095 40
Price: $82.00
911 Windshield Seal
WINDSHIELD SEAL 911 THRU 88 912 912 E 911 TURBO THRU 88
Item: BOD 911 541 225 03
Price: $85.00
Quarter Window Seal Left
Quarter Window Weatherstrip 911 to 87 911 turbo to 87 (LEFT)
Item: BOD 911 543 035 01
Price: $117.00
Quarter Window Seal 911 Right
Quarter Window Weatherstrip 911 to 87 911 turbo to 87 (right)
Item: BOD 911 543 036 01
Price: $116.60
Rear Windshield Seal
REAR WINDSHIELD SEAL 912, 912 E, 911 THRU 88 TURBO THRU 88 , 89 WITH MOULDINGS ONLY
Item: BOD 911 545 225 00
Price: $109.00
Rubber Pad - 911 Door Sill Left
RUBBER STRIP PAD - LEFT SIDE DOOR SILL - PORSCHE 911 THRU '98 / 911 TURBO THRU '97 / 912/E - GENUINE - LIST: $38.97
Item: BOD 911 551 619 00
Price: $38.50
Rubber Pad - 911 Door Sill
RUBBER STRIP PAD - RIGHT SIDE DOOR SILL - PORSCHE 911 THRU '98 / 911 TURBO THRU '97 / 912/E - GENUINE - LIST: $39.15
Item: BOD 911 551 620 00
Price: $38.50
Rear Brake Light Lens Euro Left
EURO REAR BRAKE LIGHT LENS (LEFT SIDE) "AMBER" W- BLACK TRIM, FIT'S PORSCHE 912/911/930 '69 THRU '89
Item: BOD 911 631 949 00
Price: $137.00
Rear Brake Light Lens Euro Right
EURO REAR BRAKE LIGHT LENS (RIGHT SIDE) "AMBER" W- BLACK TRIM, FIT'S PORSCHE 912/911/930 '69 THRU '89
Item: BOD 911 631 950 00
Price: $137.00
911 Duck Bill Spoiler Composite
911 DUCKBILL SPOILER - Composite Fiberglass
Item: BOD 911 D.B.S.
Price: $615.00
Headlight Cover 911 / 930 Composite
911/930 HEADLIGHT COVER (FIBERGLASS)
Item: BOD 911-1000
Price: $110.00
911 / 930 IROC DP Front Spoiler Bumper Cover
Front Spoiler Bumper Cover - PORSCHE 911 / 930 IROC - DP Style - For 9 inch wide fenders - High quality batch production from lightweight composite materials - PATRICK MS USA
Item: BOD 911-20015
Price: $485.00
911 / 930 IROC Rear Bumber Cover Wide Body
REAR BUMPER COVER - PORSCHE 911 RSR / 930 IROC WIDE BODY 11 INCH - COMPOSITE
Item: BOD 911-403
Price: $465.00
911 912 Rear Engine Deck Lid Composite
'65-'89 911 REAR ENGINE LID LIGHTWEIGHT FIBERGLASS
Item: BOD 911-513
Price: $390.00
911 930 Roof Skin Composite
911 COMPOSITE GLASS ROOF SKIN W/O SUN ROOF
Item: BOD 911CGRS
Price: $880.00
911 Composite Door Set - Lightweight
911 RACE DOOR ASSEMBLY SET, LIGHTWEIGHT GLASS
Item: BOD 911D
Price: $850.00
BOD 911FGDASH
DASH TOP COVER SKIN - PORSCHE 911 - COMPOSITE - BLACK
Item: BOD 911FGDASH
Price: $325.00
Headlight Cover YLW
HEADLIGHT COVER SET - YELLOW PLASTIC - PORSCHE 911 / 930
Item: BOD 912964
Price: $178.00
Fender Flare - Wing Joining Plate - Front Left - 911 / 930 Turbo
Fender Flare - Wing Joining Plate - Front Left - (9 Inch) - Steel - DANSK - MSRP: $762.42
Item: BOD 930 503 307 00 DAN
Price: $475.00
4.62 LBs
Fender Flare - Wing Joining Plate - Front Right - 911 / 930 Turbo
Fender Flare - Wing Joining Plate - Front Right - (9 Inch) - Steel - DANSK - MSRP: $720.59
Item: BOD 930 503 308 00 DAN
Price: $475.00
4.62 LBs
Fender Flare / Welding Plate - Rear Left - 911 / 930 Turbo
Fender Flare / Welding Plate - Rear Left - 911 / 930 Turbo - 11 Inch - Steel DANSK - MSRP: $888.81
Item: BOD 930 503 607 00 GRV
Price: $475.00
6.89 LBs
Fender Flare / Welding Plate - Rear Right - 911 / 930 Turbo
Fender Flare / Welding Plate - Rear Right - 911 / 930 Turbo - 11 Inch - Steel - DANSK - MSRP: $962.95 (6.89 Lbs)
Item: BOD 930 503 608 00 GRV
Price: $475.00
6.89 LBs
Porsche Hood Emblem Crest Kit - Gold Type
Porsche Hood Emblem Crest Kit - Gold Type - GENUINE PORSCHE+ Includes base seal and nut set
Item: BOD 996 559 211 KIT
Price: $127.00
0.16 LBs
BOD LIDPINKIT
DECK LID PIN KIT - HOLD DOWN SET INCLUDES SPECIALLY MACHINED DELRIN STRIKER DISCS, ALUMINUM PINS, AND LOCKING CLIPS - LIGHTWEIGHT - PATRICK MS EXCLUSIVE
Item: BOD LIDPINKIT
Price: $48.00
WINDSHIELD - FRONT - 911/930 LEXAN LIGHTWEIGHT
WINDSHIELD - FRONT - 911/930 LEXAN LIGHTWEIGHT ( FOR RACE APPLICATIONS ONLY)NOT LEGAL FOR STREET USE!!!
Item: BOD SPE911LLWFW
Price: $620.00
Lexan Door Window 911
911 LEXAN DOOR WINDOWS W- SLIDER OPENING, R&L SET.FOR RACE APPLICATIONS ONLY! (NOT LEGAL FOR STREET USE)
Item: BOD SPE911LWDGWSL
Price: $420.00
Quarter Window Set Rear Lexan
QUARTER WINDOW SET - REAR - FLUSH MOUNT - PORSCHE 911 / C2 / C4 / 993 - 1/8 TH INCH LEXAN FLAT RACE APPLICATIONS ONLY (NOT LEGAL FOR STREET USE)
Item: BOD SPE911QMR5
Price: $88.00
Quarter Window Set Rear Flush Mount 911
QUARTER WINDOW SET - REAR - FLUSH MOUNT - PORSCHE 911 / C2 / C4 / 993 - 3/16 INCH LEXAN FLAT RACE APPLICATION ONLY (NOT LEGAL FOR STREET USE)
Item: BOD SPE911QMR6
Price: $98.00
Quarter Window Hardware Kit
HARDWARE KIT - FLUSH MOUNT QUARTER WINDOW HARDWARE SET
Item: BOD SPE911QWHARD
Price: $18.00
Quarter Window Frame 911
QUARTER WINDOW FRAME SET - REAR - FLUSH MOUNT - PORSCHE 911 C2 / C4 / 993 - BLACK - REQUIRES FINAL FITMENT AND MOUNTING HARDWARE KIT
Item: BOD SPEF911Q1
Price: $138.00
BOD SPEW911RASY2
REAR WINDOW ASSEMBLY - FLUSH MOUNT .1875 INCH THICK LEXAN - DROP IN READY WITH QUICK DISCONNECT FASTENERS. RACE APPLICATION ONLY (NOT LEGAL FOR STREER USE)
Item: BOD SPEW911RASY2
Price: $589.00
TILTON ADJUSTABLE BRAKE PROPORTION VALVE
TILTON ADJUSTABLE BRAKE PROPORTION VALVE - 7 POSITION LEVER TYPE - 10 MM X 1 MM PORT THREADS - ALUMINUM WITH BLACK ANODIZED FINNISH
Item: BRA 90-1003
Price: $108.00
0.80 LBs
BRA 901 352 041 14
BRAKE ROTOR - REAR - PORSCHE 911 '69-'77 VENTED / 911 '78-'83 / 911 TURBO THRU '77 - VENTED - ZIMMERMANN - LIST: $201.84
Item: BRA 901 352 041 14
Price: $120.15
Parking Brake Shoe Set 911
PARKING BRAKE SHOE SET (4) - PARKING BRAKE - PORSCHE 911 THRU '89 / 912 / 912 E / 911 TURBO THRU '77 - (4 PER CAR) - LIST: $ 215.12
Item: BRA 911 352 097 10
Price: $168.50
Brake Pad Set Rear Textar
BRAKE PAD SET - REAR - PORSCHE 911 '84-'89 - TEXTAR - LIST: $78.46
Item: BRA 911 352 950 04
Price: $69.50
BRAKE MASTER CYLINDER - DUAL CIRCUIT
BRAKE MASTER CYLINDER - DUAL CIRCUIT - PORSCHE 911 '77-'89 /911 TURBO '77 - ATE - LIST: $294.64
Item: BRA 911 355 011 12
Price: $236.00
SOCKET PIECE - 90 DEG. BRAKE BANJO FITTING
SOCKET PIECE - 90 DEG. BRAKE BANJO FITTING - PORSCHE - 10 MM x 1.0 MM - FOR CARS WITHOUT BRAKE BOOSTER - LIST: $18.88
Item: BRA 914 355 531 00
Price: $19.00
BRA 928 352 097 98
PARKING BRAKE SHOE SET - PORSCHE 911-'81-01'911 TURBO '80-'08, CARRERA '91-'08 CARRERA 2 '90-'05, CARRERA"4" '89-'08, CARRERA "4S" '96-'08 CARRERA "S" '05-'08, 911 GT2 '02-'08, GT3 '04-'08 GT3 RS '07-'08, BOXSTER &"S" '01-'08 1 SET PER CAR - GENUINE - LIST: $180.96
Item: BRA 928 352 097 98
Price: $172.00
BRA 930 351 047 02
BRAKE ROTOR - LEFT FRONT - PORSCHE 911 TURBO LOOK / 911 TURBO '81-'89 - CROSS DRILLED - ZIMMERMANN - LIST: $424.31
Item: BRA 930 351 047 02
Price: $421.75
Brake Disc Rotor Porsche Right Rear 911 / 930
BRAKE DISC - RIGHT REAR - PORSCHE 911 '81-89' TURBO-'78-80' CARRERA '84-89' ZIMMERMAN - LIST: $273.69
Item: BRA 930 352 046 01
Price: $238.00
BRAKE MASTER CYLINDER - 23 MM DUAL CIRCUIT
BRAKE MASTER CYLINDER - 23 MM DUAL CIRCUIT - PORSCHE 911/930 TURBO ''78-80' / 911 '81-89' - ATE - LIST: $342.52
Item: BRA 930 355 011 03
Price: $292.00
Brake Line Set - F/R
Brake Hose Set - Steel Braided with Clear Protective Jacket - DOT Approved - 1969-1989 PORSCHE 911 / 930, 1970-1972 PORSCHE 914 - 4 Piece Set - Front / Rear, TROUTMAN , MSRP: $138.50
Item: BRA 99 5522 101
Price: $126.00
Brake Pad Set - Pagid Racing RS4-4 Orange
BRAKE PAD SET - REAR - PAGID RACING RS4-4 ORANGE -356 FROM 64 FRONT, 911 THRO 68 FRONT,911 69 THRO 75 /M CALIPERS FRONT,76 THRU 89 REAR,912 FRONT,912 69' REAR,912 E REAR,914/4 FRONT FROM 72,914/6 REAR911 TURBO THRU 77 REAR
- IDEAL FOR TOURING CAR, SHORT TRACK, LONG DISTANCE & SHOWROOM STOCK APPLICATIONS
Item: BRA 99 5541 539
Price: $224.35
Parking Brake Shoe Set
PARKING BRAKE SHOE SET - PORSCHE - 911 TURBO '78-'94 CARRERA 2 & 4 THRU '94, 968, BOXSTER "S" THRU '04 BOXSTER FROM '05 CAYMAN CAYMAN "S" CARRERA AND CARRERA 4 CARRERA "4S" FROM '06 (1 SET PER CAR) - LIST: $155.09
Item: BRA 997 352 993 01
Price: $148.00
Hydraulic Fluid Hose
Hydraulic Fluid Hose (7.5 X 12.5 mm, Blue Cloth Braided) / Brake / Clutch Master Cylinder Control - METEOR - MSRP: $30.32+ Unit: Per 1 Meter
Item: BRA 999 181 021 50 MET
Price: $15.00
0.10 LBs
Brake Master Cylinder Kit Sport 23mm
Brake Master Cylinder Kit - Sport (23mm) Conversion to 911 / 914 non-power assisted models - Direct replacement assembly includes custom engagement push rod, new OEM type master cylinder and fluid nipple fittings.+ Please contact us for supplimental parts advice!
Item: BRA23MMKIT
Price: $278.00
CLU 225PUCKRH-901
CLUTCH DISC - 225 MM - 901 SPLINE - 4 PUCK BRONZE METALLIC LINING - SOLID HUB TYPE - RACING USE 911/ 71-86
Item: CLU 225PUCKRH-901
Price: $288.00
CLU 225PUCKSH-915
CLUTCH DISC - 225 MM / 915 TRANS - 6 PUCK BRONZE METALLIC RACE DISC - 20 SPLINE X 7/8 - 8.00 MM / .315 INCH THICK - SPRING HUB TYPE
Item: CLU 225PUCKSH-915
Price: $298.00
915 Sachs Power Clutch
Clutch Kit - Sachs Power Clutch - 1972-1986 PORSCHE 911 / 915 Transaxle (225mm) - SACHS, MSRP: $1335.89+ Contains: (1) Disc, (1) Aluminum Pressure Plate, (1) Release Bearing
+ (-2 Lbs less mass compared to OEM iron pressure plate cover)
Item: CLU 3000 961 101
Price: $802.00
CLU 88 1861 845
CLUTCH DISC - PORSCHE 911 '72-'86 - 915 SPLINE / TRANSMISSION - SACHS "SPORT" HIGH PERFORMANCE DISC - ORGANIC LINING WITH HIGHER FRICTION - SPRING CENTERED - BONDED, RIVETED FACINGS - LIST: $1033.72
Item: CLU 88 1861 845
Price: $694.00
CLUTCH DISC - RSR RIGID HUB WITH METALLIC 4 PUCK DISC
CLUTCH DISC - RSR RIGID HUB WITH METALLIC 4 PUCK DISC - PORSCHE 911 '72-'86 - 915 SPLINE - SACHS RACE ENGINEERING - LIST: $849.50
Item: CLU 88 1864 972
Price: $594.65
Starter Ring Gear - 225mm - 915 Transmission
Starter Ring Gear - 225mm / 915 Transmission (1970-1985) 911 - GENUINE PORSCHE, MSRP: $203.25
Item: CLU 911 116 239 00
Price: $144.00
915 Pressure Plate
PRESSURE PLATE - 225 MM - PORSCHE 911 '72-'86 / 915 TRANS- CAST IRON - 13.62 LBS. - SACHS - LIST: $436.17 **Original pressure plate contact force rated at 7800 to 8500 N
Item: CLU 915 116 001 27
Price: $348.00
Clutch Pressure Plate - Sport - 911 - 915 - 225 mm
Clutch Pressure Plate - 225 mm "Sport" (1972-1986) PORSCHE 911 / 915 Transmission - Aluminum Housing, 9.80 Lbs. (4.45 Kg.) - SACHS PERFORMANCE
Item: CLU 915 116 001 SP
Price: $1198.00
911 915 Clutch Disc (225 mm)
Clutch Disc 225mm - Sprung Hub Center, Organic Lining, 1972-'86, 911 | 915 Transmission, 3.70 Lbs., SACHS PN: 1861 759 035, MSRP: $408.74
Item: CLU 915 116 011 22
Price: $175.00
3.70 LBs
911 915 Clutch Release Bearing
Clutch Release Bearing - PORSCHE 911 1972-'86 - 915 Transmission, SACHS PN: 3151 012 031, MSRP: $231.65
Item: CLU 915 116 082 80
Price: $167.00
915 Clutch Kit SACHS
CLUTCH KIT - SACHS - '72-'84 PORSCHE 911 - 225MM - STEEL PRESSURE PLATE (12 LBS) - SPRING DISC - RELEASE BEARING - LIST: $1010.01
Item: CLU 915 116 911 KIT
Price: $719.00
Starter Ring Gear 911 G50 - 930 Turbo 3.3L
Starter Ring Gear - 240mm - (1976-1988) 911 / 930 Turbo & (1986-1988) 911 G50 | 7.70 mm Thickness - GENUINE - MSRP: $236.98
Item: CLU 930 116 230 02 GEN
Price: $190.00
1.95 LBs
Clutch Kit 911 915 Centerforce DF200199
Clutch Set - 225 mm Sport (1972-1986) PORSCHE 911 / 915 Transmission - Matched High Clampload Steel Pressure Plate & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA+ Torque Capacity rated at 430 ft/lbs.
+ Use with PN: 915 116 082 80 - Clutch Release Bearing
** THIS PACKAGE STARTS WITH A NEW SACHS 225mm STEEL PRESSURE PLATE, MODIFIED TO HIGH CLAMP LOAD RSR SPEC. W- TRIPLE DRIVE STRAPS, THIS IS THE KEY ELEMENT TO THE PERFORMANCE OF THIS CLUTCH PACKAGE ! THE TRIPLE DRIVE STRAP TECHNOLOGY ALLOWS THE PRESSURE PLATE TO HANDLE THE HIGH TORQUE LOAD OF LARGE DISPLACEMENT ENGINE LIKE THE 3.6L, 3.8L & 3.3L TURBO APPLICATIONS, BUT EQUALLY IMPORTANT IS THE ABILITY OF A CLUTCH TO HANDLE THE OPPOSITE LOAD ASSOCIATED WITH DOWN SHIFTS IN RACE OR AUTOCROSS ABUSE. THIS PRESSURE PLATE MATTED WITH THE CENTERFORCE PATENTED DUAL FRICTION CARBON/KEVLAR SPRING HUB DISC MAKE FOR THE MOST RELIABLE PERFORMANCE STREET / RACE CLUTCH PACKAGE WE CAN SELL YOU ! WE NEED TO REMIND YOU THIS IS A VERY STREETABLE CLUTCH, WITH LITTLE TO NO PEDAL EFFORT INCREASE. (THE T/O BEARING IS SHOWN-BUT NOT INCLUDED WITH THIS PKG.) - LIST: $1545.95
Item: CLU DF200199
Price: $1098.00
Clutch Kit 911 - 915 Sport Lightweight Aluminum Centerforce Dual Friction
Clutch Set - 225 mm Sport Lightweight (1972-1986) PORSCHE 911 / 915 Transmission - Matched High Clampload 9.50 Lbs. (4.31 Kg) Aluminum Pressure Plate & Dual Friction Carbon / Kevlar Torsion Damper Disc Set - CENTERFORCE / PATRICK MS USA+ Torque Capacity rated at 430 ft/lbs.
+ Use with PN: 915 116 082 80 - Clutch Release Bearing
Item: CLU DF991002
Price: $1730.00
Sport Clutch Cover 915 225mm KEP Stage I
Clutch Pressure Plate - 915 (225mm) HD Stage I - Lightweight Forged Aluminum Cover / Iron friction plate - HD Triple drive straps and rivets - KEP+9.50 Lbs. (4.31 Kg.)
+ Torque capacity rated at 415 ft/lbs with stock disc
Item: CLU KEP 915 HD-A-I-S1
Price: $788.00
7.00 LBs
Sport Clutch Cover 915 225mm KEP Stage II
Clutch Pressure Plate - 915 (225mm) HD Stage II - Lightweight Forged Aluminum Cover / Iron friction plate - HD Triple drive straps and rivets - KEP+9.50 Lbs. (4.31 Kg.)
+ Torque capacity rated at over 415 ft/lbs with stock disc
Item: CLU KEP 915 HD-A-I-S2
Price: $788.00
7.00 LBs
Sport Clutch Cover 915 225mm KEP Stage I All Aluminum
Clutch Pressure Plate - 915 (225mm) HD Stage I - Lightweight Forged Aluminum Cover / Billet Aluminum Friction Plate - HD Triple drive straps and rivets - KEP+ 7.00 Lbs. (3.18 Kg.)
+ Torque capacity rated at 415 ft/lbs with stock disc
+ For use with organic type disc only
Item: CLU KEP 915 HD-A-S1
Price: $788.00
7.00 LBs
Clutch Pressure Plate - 915 (225mm) HD Stage II All Aluminum
Clutch Pressure Plate - 915 (225mm) HD Stage II - Lightweight Forged Aluminum Cover / Billet Aluminum Friction Plate - HD Triple drive straps and rivets - KEP+ 7.00 Lbs. (3.18 Kg.)
+ Torque capacity rated at 477+ ft/lbs with stock disc
+ For use with organic type disc only
Item: CLU KEP 915 HD-A-S2
Price: $788.00
7.00 LBs
CLU KF 200 01
CLUTCH KIT - SACHS - PORSCHE 911 '72-'86 - 225MM - INCLUDES: STEEL PRESSURE PLATE (12 LBS), SPRING HUB DISC & RELEASE BEARING - LIST: $1007.35
Item: CLU KF 200 01
Price: $718.76
Clutch Disc Porsche 915 Race
CLUTCH DISC - 225 MM / 915 TRANS - 6 PUCK BRONZE METALLIC RACE DISC - 20 SPLINE X 7/8 - 8.00 MM / .315 INCH THICK - SOLID HUB TYPE
Item: CLU225PUCKSH-915
Price: $268.00
DRI 911 331 065 33
WHEEL HUB - REAR - PORSCHE 911 '74-'89 - HUB CENTRIC TYPE - 2 PER CAR - GENUINE - LIST: $600.73 *USED PARTS MAY BE AVAILABLE
Item: DRI 911 331 065 33
Price: $605.04
WHEEL HUB SET - REAR - PORSCHE 911
WHEEL HUB SET - REAR - PORSCHE 911 '74-'89 - HUB CENTRIC TYPE - 1 SET PER CAR - GENUINE - CERTIFIED PATRICK USED PARTS - NEW LIST: $1166.44 *LONGER WHEEL STUDS AND INSTALLATION ALSO AVAILABLE
Item: DRI 911 331 065 33 USED
Price: $280.00
Drive Axle Shaft - 911 Carrera
Axle Shaft Assembly - PORSCHE 911 Carrera 1985-1989 - 108mm Joints - Left / Right 2 Per Car - OEM GKN LOEBRO - MSRP: $488.18+ Only for cars with 915.73 or G50 type transmissions & 10mm Axle Joint Bolts
+ Hardware bolts included
+ Part Number Superseded from: 915 332 024 14
Item: DRI 911 332 024 15 GKN
Price: $348.00
DRI 923 332 033 02
DRIVE SHAFT ASSEMBLY - PORSCHE 911 S / SC '74-'86 - 912 E '75 - 100 MM JOINTS - 2 PER CAR - GKN LOEBRO - FOR THIN BOOT FLANGE USE 923 332 037 00 - LIST: $1042.90
Item: DRI 923 332 033 02
Price: $386.45
Wheel Bearing Rear 911 FAG
WHEEL BEARING - REAR - PORSCHE 911 '74-'89 / 912 E / 924 S / 944 / 944 S / 944 S2 / 944 TURBO / 968 - 2 PER CAR - FAG - LIST: $119.50
Item: DRI 999 053020 01
Price: $65.69
ELE 0 258 006 MOT
OXYGEN SENSOR - 6 WIRE (TYPE LSU4) WIDE BAND OXYGEN SENSOR FOR RACING APPLICATION - USED WITH MOTEC OR ZYTECH MANAGEMENT SYSTEM - LIST: $226.79
Item: ELE 0 258 006 MOT
Price: $148.25
ELE 911 603 120 04
ALTERNATOR - PORSCHE 911 '75 THRU '83 / 911 TURBO THRU '83 - 75 AMP - VALEO - LIST: $1159.28
Item: ELE 911 603 120 04
Price: $465.20
Starter - High Torque Gear Reduction Type
Starter - High Torque Gear Reduction Type - PORSCHE (1965-1989) 914 / 911 - 901 / 915 / 930 / G50 Transaxles / VW Type I - 130 Tooth Ring Gear - CCW Rotation - 1.2 kW 12V - Rotatable Index - 4.44 to 1 Gearing - Genuine Nippon Denso starter motor / Aluminum Adapters - Compact Light weight (< 9 Lbs) - PATRICK MS USA+ Vented heat resistant solenoid - No hot start problems - 5 Full roller bearings - Draws less current than other units - Provides 525 plus ft. lbs. of torque
THIS STARTER WILL GIVE YOU THE ADDED TORQUE TO CRANK THE LARGER DISPLACEMENT ENGINES OR TO ADD TO A STOCK APPLICATION FOR EASIER STARTS
Item: ELE 911 604 101 HTS
Price: $288.00
8.80 LBs
ELE 911 606 112 00
OIL TEMPERATURE SENDER - FOR GAUGE - PORSCHE 911 '74-'89 - LIST: $58.96
Item: ELE 911 606 112 00
Price: $35.38
Speedo Impulse Sender 915
SPEEDOMETER IMPULSE SENDER - ELECTRONIC - FIT'S PORSCHE '76 912 E / 911 '76-'84 / 911 TURBO THRU '84 - GENUINE - LIST: $135.70
Item: ELE 911 606 209 00
Price: $128.00
ELE 911 612 086 02
FUSE BLOCK PANEL - 10 FUSE BLOCK - PORSCHE 911 '74-'89 & 911 TURBO THRU '89 - GENUINE - LIST: $95.33
Item: ELE 911 612 086 02
Price: $126.87
Wiring Harness Connector 14 Pin Engine Harness
Wiring Harness Connector for Engine (14-Pin Male Connector with Pins) - GENUINE PORSCHE, MSRP: $44.54
Item: ELE 911 612 113 05
Price: $44.50
ELE 911 618 111 16
CONTROL UNIT - DME - PORSCHE 911 '87-'89 - M637 CLUB-SPORT - INCREASED RPM LIMIT FROM 6250 TO 6840 - BOSCH - LIST: $2169.07
Item: ELE 911 618 111 16
Price: $2061.00
911 930 Auxiliary Fan For Front Oil Cooler Porsche
FAN - AUXILIARY FOR FRONT OIL COOLER - PORSCHE 911 / TURBO '87-'89 - GENUINE - LIST: $526.23
Item: ELE 911 624 121 00
Price: $498.00
Reverse Light Switch Porsche Transmission
REVERSE LIGHT SWITCH - MANUAL TRANSMISSION - PORSCHE - FROM 356 TO 97 TURBOGENUINE - LIST: $96.43
Item: ELE 914 613 541 02
Price: $86.79
ELE 930 602 907 01 B
Ignition Distributor Wire (Green Wire) - PORSCHE 911 '78-'83 / 911 TURBO '78-'89 - GREEN WIRE / PIG TAIL - BOSCH - LIST: $89.05 - PORSCHE 911 '78-'83 / 911 TURBO '78-'89 - GREEN WIRE / PIG TAIL - BOSCH - LIST: $63.94
Item: ELE 930 602 907 01 B
Price: $77.00
ELE 999 611 920 20
GROUND STRAP - TRANSMISSION TO BODY CHASSIS - 912E / 911 '72-'98 / 911 TURBO THRU '97 / EXCEPT TIPTRONIC - GENUINE - LIST: $17.10
Item: ELE 999 611 920 20
Price: $16.24
ELE BQD-X
BATTERY DISCONNECT TERMINAL END KIT - SIMPLY UNSCREW THE GREEN KNOB TO DISCONNECT BATTERY POWER - A MUST FOR LESS FREQUENTLY DRIVEN CARS
Item: ELE BQD-X
Price: $12.00
ELE M880
COMPLETE MOTEC SYSTEM SOLUTIONS FOR PORSCHE MOTORSPORT APPLICATION - PLEASE CONTACT US FOR SYSTEM EVALUATION - THE APPLICATIONS GUIDE IS AVAILABLE FOR DOWNLOAD IN THE CATALOGS SECTION ON OUR WEBSITE
Item: ELE M880
Price: $0.00
ELE RCX11862
MASTER DISCONNECT SWITCH - POWER - 6 POLE TYPE WITH ALTERNATOR - (FIA APPROVED) *Required for race carsALSO USED ON OUR BOXSTER SPEC RACING (BSR) CARS
Item: ELE RCX11862
Price: $48.00
ELE TIL 40-524
TILTON OIL / WATER PUMP - USED ON TRANSAXLE COOLER SYSTEMS - LIGHTWEIGHT - 3/8" NPT INLET / OUTLET - 12 VOLT - BUNA - INCLUDES BYPASS - 60 PSI WORKING PRESSURE - 1-2 GPM FLOW RATE
Item: ELE TIL 40-524
Price: $192.50
ELE UN6627400
HELLA AIR HORN SET - HIGH AND LOW TONE - INCLUDES ELECTRIC AIR PUMP & RELAY, COMPLETE KIT WITH HARDWEARE FOR INSTALLATION - LIST: $59.05* A MUST FOR A FAST CAR IN SLOWER TRAFFIC !
Item: ELE UN6627400
Price: $54.75
Camshaft Set - RSR Sprint
Engine Camshaft Set - (RSR Sprint) - PORSCHE 911 / 930 / 964 / 993 - SOHC 12V | 47 or 49mm O.D. Journals / 3 or 4 Bearing | #134 / 149I - New Billet Special Grind - WEB CAM - MSRP: $999.00+ Specify journal size O.D.
+ Specify end drive requirements (P-S / Scavenge / Both)
+ If 993 Hydraulic, add labor PN: 95-002 - Machine oil groove in camshaft main
Item: ENG 05-042
Price: $975.00
13.00 LBs
Engine Camshaft Set - 993 Super Sport Mechanical Rocker
Engine Camshaft Set - (993 Super Sport Mechanical Rocker) - PORSCHE 911 / 930 / 964 / 993 - SOHC 12V | 49mm O.D. Journals / 4 Bearing | #296 | New Billet Special Grind - WEB CAM - MSRP: $999.00+ Specify end drive requirements (P-S / Scavenge / Both)
Item: ENG 05-392
Price: $975.00
13.00 LBs
ENG 901 105 370 02 MA
VALVE ADJUSTING SCREW - PORSCHE 911 THRU '94 / TURBO THRU '94 / 914 6 - MAHLE-WIZEMANN - LIST: $28.89
Item: ENG 901 105 370 02 MA
Price: $23.50
ENG 901 105 901 50
VALVE SPRING - DUAL SPRING SET, PORSCHE 911 '72 THRU '83 / 911 TURBO THRU '77 - 12 PER CAR - GENUINE PORSCHE - LIST: $73.67 EACH
Item: ENG 901 105 901 50
Price: $36.00
Engine Valve Spring Set - Sport / Racing
Valve Spring Set - Sport / Racing - 911 / 914 / 964 / 993 / Turbo - (Set of 24) - EIBACH / PATRICK MS USA+ 993 Applications use with: 12) 901 105 463 00 - Spring Seat & 1) ENG 911930-9-TIRET - TI Spring Retainer Set 9mm
Item: ENG 901 105 901 50 HP
Price: $535.00
1.70 LBs
OIL RETURN TUBE - SOLID - PORSCHE 911
OIL RETURN TUBE - SOLID - PORSCHE 911 THRU '98 / 911 TURBO THRU '97 - 4 PER CAR - GENUINE - LIST: $25.34
Item: ENG 901 107 351 01
Price: $19.50
OIL PUMP - ENGINE - PORSCHE 911 CARRERA
OIL PUMP - ENGINE - PORSCHE 911 CARRERA THRU '89 / 911 TURBO THRU '77 - GENUINE - LIST: $ 988.45 *FOR 914 6 AND PRE '75 911 APPLICATIONS USE PART NUMBER: 901 107 002 06 K - OIL PUMP CONVERSION KIT
Item: ENG 911 107 008 05
Price: $902.48
4.56 LBs
ENG 911 107 041 00
OIL COOLER - ON ENGINE - PORSCHE 911 '72-'89 / 911 TURBO THRU '89 - GERMAN AFTERMARKET - LIST: $1613.86
Item: ENG 911 107 041 00
Price: $1478.00
ENG 911 375 043 07
MOUNT - ENGINE / TRANSMISSION - THIS IS THE FIRM "CLUB SPORT" M637 MODEL - FITS ALL '65-'89 PORSCHE 911 & 930 CHASSIS FOR ENGINE MOUNTING (REAR) - 2 PER CAR, AND FIT'S ALL '72-'86 915 TRANSAXLE CROSS MEMBERS - 2 PER CAR - GENUINE - LIST: $64.83 *SHOWN WITH HARDWARE - NOT INCLUDED. * WE STOCK ALL ENGINE & TRANSAXLE MOUNTING HARDWARE INCLUDING THE CLAM SHELL WASHERS !
Item: ENG 911 375 043 07
Price: $58.00
ENG 911930-8-TIRET
VALVE SPRING RETAINER SET - TITANIUM - (8 MM VALVE STEM) PORSCHE - FOR USE WITH HIGH PERFORMANCE VALVE SPRING SET: 901 105 901 50 HP - 1 SET PER CAR - PATRICK MOTORSPORTS - LIST: $342.00
Item: ENG 911930-8-TIRET
Price: $350.00
ENG 911930-9-TIRET
VALVE SPRING RETAINER SET - TITANIUM - (9 MM VALVE STEM) PORSCHE 914 6 / 911 THRU '94 / PORSCHE 911 TURBO THRU '94 - FOR USE WITH HIGH PERFORMANCE VALVE SPRING SET: 901 105 901 50 HP - 1 SET PER CAR - PATRICK MOTORSPORTS - LIST: $342.00
Item: ENG 911930-9-TIRET
Price: $350.00
ENG 914 103 171 00
BOLT - CONNECTING ROD - PORSCHE 911 '72-'83 / 911 TURBO THRU '77 - 12 PER CAR - GENUINE - LIST: $14.99
Item: ENG 914 103 171 00
Price: $13.49
ENG 930 103 985 00
PISTON RING SET - STANDARD 95.00 MM - 1.50 X 1.75 X 3.50 MM - PORSCHE 911 '80-'89 - PACK OF 6 - GOETZE - LIST: $429.24
Item: ENG 930 103 985 00
Price: $256.54
ENG 930 104 321 50
VALVE GUIDE - INTAKE / EXHAUST '76-91'- STANDARD 1ST REPLACEMENT - 9 X 13.08 MM - PORSCHE 911 / TURBO - PHOSPHORUS BRONZE - LIST: $12.76
Item: ENG 930 104 321 50
Price: $8.00
ENG 930 105 043 00
ROCKER ARM - PORSCHE 911 / TURBO THRU '94 - 12 PER CAR - GENUINE - LIST: $109.69
Item: ENG 930 105 043 00
Price: $113.31
ENG 930 105 116 00
VALVE COVER - LOWER EXHAUST LEFT/RIGHT - PORSCHE 914-6, 911 '68-'89 / TURBO THRU '92 - 2 PER CAR - GENUINE - LIST: $440.80
Item: ENG 930 105 116 00
Price: $128.00
ENG 930 107 040 01
OIL RETURN TUBE KIT - COLLAPSIBLE TYPE -CAN BE REPLACED WITH ENGINE IN CAR. PORSCHE 911 / 930 / 965 / 993 / 993TT - INCLUDES O-RING SET GREEN - ZINC PLATED STEEL - 4 PER CAR - GENUINE - LIST: $39.35
Item: ENG 930 107 040 01
Price: $42.00
ENG 930 107 351 90 ST
OIL RETURN TUBE KIT - COLLAPSIBLE TYPE -CAN BE REPLACED WITH ENGINE IN CAR. PORSCHE 911 / 930 / 965 / 993 / 993TT - BILLET ALUMINUM - INCLUDES O-RING SEALS - 4 PER CAR - LIST: $72.50 EACH
Item: ENG 930 107 351 90 ST
Price: $38.00
ENG 930 107 765 00
THERMOSTAT - ENGINE OIL - ON CASE - PORSCHE 911 '72-'89 / 911 TURBO THRU '89 - ALSO USE 1 QTY: 999 707 314 40 O-RING - BEHR - LIST: $168.35
Item: ENG 930 107 765 00
Price: $152.00
ENG 930 375 011 01
ENGINE CARRIER - SUPPORT CROSS MEMBER - PORSCHE 911 / TURBO THRU '89 COUPE / TARGA - GENUINE -
Item: ENG 930 375 011 01
Price: $143.65
MAIN BEARING SET '78-94' - STANDARD #8 NOSE - PORSCHE 911 / TURBO
MAIN BEARING SET '78-94' - STANDARD #8 NOSE - PORSCHE 911 / TURBO - LIST: $ 271.48
Item: ENG 964 101 138 01
Price: $244.33
BEARING SET - MAIN STANDARD # 1-7 - '78-94' PORSCHE 911 / TURBO
BEARING SET - MAIN STANDARD # 1-7 - '78-94' PORSCHE 911 / TURBO - GLYCO - LIST $1187.23
Item: ENG 964 101 901 00
Price: $337.00
Cylinder Head Stud (Engine Case)
Cylinder Head Stud (Engine Case) Fully Threaded Type - (24 Per Engine ) - GENUINE - MSRP: $47.55+ Replaces PN: 993 101 170 51
Item: ENG 993 101 170 53
Price: $47.00
0.15 LBs
ENG 993 105 529 00
TIMING CHAIN - PORSCHE 911 / TURBO / 914 - WITHOUT MASTER LINK - 2 PER CAR - LIST: $84.73
Item: ENG 993 105 529 00
Price: $82.85
TIMING CHAIN - PORSCHE 911 - 914 - 911 TURBO - 911 TURBO 3.6
TIMING CHAIN - PORSCHE 911 - 914 - 911 TURBO - 911 TURBO 3.6 - HEAVY DUTY TYPE - SPORT AND RACING - LESS STRETCH W/ IMPROVED PIN PLATING - 2 PER CAR - LIST: $124.95
Item: ENG 993 105 529 HD
Price: $112.15
ENG 999 034 005 00
VALVE ADJUSTER NUT - FOR VALVE ADJUSTING SCREW - PORSCHE 911 THRU '94 / TURBO THRU '94 / 914 6 - GENUINE - LIST: $1.08
Item: ENG 999 034 005 00
Price: $0.97
ARP Rod Bolt Set 911 & Turbo (10mm)
Rod Bolt Set - Pro Wave ARP 2000 Complete, Porsche 911, 10mm - Application: (1972-73) 911 2.4L, (1974-83) 911, (1976-77) 930 - ARP
Item: ENG ARP 6001
Price: $274.00
Valve Spring Seat for HP Engine Valve Springs
SPRING SEAT FOR HIGH REV SPRING, MUST USE W- 8mm VALVE/ ORDER 12 PER CAR**UES WITH PART #ENGHP10T8 TITANIUM RETAINERS AND ENG901.105.901.50.HP SPRINGS
Item: ENG HPSS
Price: $9.00
Muffler Strap 911
MUFFLER STRAP - PORSCHE 911 '65-'83 - STAINLESS STEEL - 2 CAR - GENUINE - LIST: $59.97
Item: EXH 901 111 157 04
Price: $60.75
Sport Muffler 911 SS Dual In/Out 70mm
MUFFLER - SPORT - DUAL IN / DUAL 70MM OUT - POLISHED STAINLESS STEEL - FOR PORSCHE 911 '74-UP - LIST: $1559.00
Item: EXH 911 111 025 01 DPS
Price: $1084.00
Sport Muffler 911 SS Dual In / Single Out 70mm
Exhaust Muffler - Sport - Dual Inlet / Single 70mm Left Side Outlet Tip - PORSCHE 911 (1974- Cars with dual inlet manifolds) DANSK(92.511 S) - MSRP: $1559.00+ Polished Stainless Steel
Item: EXH 911 111 025 01 PS
Price: $998.00
Muffler Tip - Ornamental Exhaust Pipe - (1974-1989) PORSCHE 911
Muffler Tip - Ornamental Exhaust Pipe - (1974-1989) PORSCHE 911 - Black - DANSK - MSRP: $34.34
Item: EXH 911 111 245 00
Price: $18.00
Exhaust Muffler - 911 Dansk Single In-Out
Exhaust Muffler - 911 (1974-1989) -Single Inlet / Outlet without Trim Tip - Gray Primered Steel - MSRP: $1376.60
Item: EXH 930 111 043 00
Price: $498.00
Exhaust Muffler - Sport Single In / Dual Out 84mm
EXHAUST MUFFLER - SPORT MUFFLER ASSEMBLY - SINGLE INLET / DUAL 84 MM OUTLET - PORSCHE 911 '75-'89 - 304 STAINLESS STEEL - POLISHED - DANSK - LIST: $1949.00
Item: EXH 930 111 043 00 DPS
Price: $968.00
Sport Exhaust Muffler 911 - Single In/Out
EXHAUST MUFFLER - SPORT MUFFLER ASSEMBLY - SINGLE INLET / SINGLE 84 MM OUTLET - PORSCHE 911 '75-'89 - 304 STAINLESS STEEL - POLISHED - DANSK - LIST: $1949.00
Item: EXH 930 111 043 00 PS
Price: $858.00
Exhaust Heat Exchanger Set - 911 B&B 1.625 Inch
Exhaust Heat Exchanger Set - (1975-1989) PORSCHE 911 - 1-5/8 (1.625) Inch O.D. Mandrel Bent Primary Tubes - TIG Welded 304 Stainless Steel Construction - B&B FABRICATION (FPOR-0400) - MSRP: $1722.00+ Requires B&B Sport Muffler System
Item: EXH FPOR-0400
Price: $1688.00
Exhaust Heat Exchanger Set - 911 B&B 1.750 Inch
Exhaust Heat Exchanger Set - (1975-1989) PORSCHE 911 - 1-3/4 (1.750) Inch O.D. Mandrel Bent Primary Tubes - TIG Welded 304 Stainless Steel Construction - B&B FABRICATION (FPOR-0400) - MSRP: $1722.00+ Requires B&B Sport Muffler System
Item: EXH FPOR-0410
Price: $1688.00
911 Exhaust Sport Muffler for B&B Twin 3 Inch Outlet
Exhaust Sport Muffler for B&B Twin Outlet - (1975-1989) PORSCHE 911 Carrera - Dual 3.00 Inch Oval Tips - T-304 Stainless Steel - MSRP: $1260.00+ Use with B&B Twin Outlet Header / Heat Exchangers
Item: EXH FPOR-0460
Price: $1188.00
911 Exhaust Sport Muffler for B&B Twin Outlet
Exhaust Sport Muffler for B&B Twin Outlet - (1975-1989) PORSCHE 911 Carrera - Dual 4.50 Inch Oval Tips - T-304 Stainless Steel - MSRP: $1337.00+ Use with B&B Twin Outlet Header / Heat Exchangers
Item: EXH FPOR-0465
Price: $1208.00
Exhaust Megaphone Bracket - 911
EXHAUST BRACKET - FOR PORSCHE 911 WITH 24 INCH LENGTH MEGAPHONE SET - MILD STEEL+ Use with 911 Megaphone Sets
+ Ceramic Thermal Coating Option: $30.00
Item: EXH P911-BA
Price: $153.00
SSI Heat Exchanger Set 911
SSI Heat Exchanger Set (pair), thin flange without O2 sensor socket, 911 (1966-74), 911 (1975-76 49-State USA), 911SC (1978-83 ROW), 911SC (1978-79 USA)
Item: EXH SSI-911-LR
Price: $1425.00
Sport Exhaust Silencer Muffler - 911RS - 914 6
Sport Exhaust Silencer Muffler - PORSCHE 911RS Style for early 911 and 914-6 (with dual bank heat exchangers / headers) - Features Dual (50mm) Inlets & Dual (57mm) Outlets - Tip Center to Center 340mm - Mild steel construction with OE type high temperature painted finish - DANSK / PATRICK MS USA+ 911 & 914 applications require tip clearance on rear valance
+ Not for 914 models equipped with H6 / 915 Wevo tail shifter tranaxles
+ Ceramic coating available in Luster Silver, Titanium Gray & Satin Black for additional: $250.00
*Weighs only 23 Lbs. (10.43 Kg.)
** SHOWN IN LUSTER SILVER CERAMIC COATING
Item: EXHESM
Price: $638.00
23.00 LBs
Sport Exhaust Silencer Muffler Wide - PORSCHE 911 RSR Style
Sport Exhaust Silencer Muffler - Wide - PORSCHE 911 RSR Style for early 911 and 914-6 (with dual bank heat exchangers / headers) - Features Dual (50mm) Inlets & Dual (63.50mm / 2.50 Inch) Outlets - Wider style tip Center to Center 756mm (29.75 Inches) - Mild steel construction with OE type high temperature painted finish - DANSK / PATRICK MS USA+ Ceramic coating available in Luster Silver, Titanium Gray & Satin Black for additional: $250.00
*Weighs only 23 Lbs. (10.43 Kg.)
** SHOWN IN SATIN BLACK CERAMIC COATING
Item: EXHESM-RSR-WIDE
Price: $638.00
23.00 LBs
SSI Sport Heat Exchanger Set 911 to 3.6L
SSI Heat Exchanger Set (Pair) Early 911 Chassis to (1990-98) 3.6L Engines - Thick Head Flange - Special Design Type / Clearances For 3.6L Engine Fitments+ Use with (12 Qty.) PN: 999 062 010 02 - Exhaust studs
964 & 993 3.6L SSI STAINLESS STEEL HEAT EXCHANGER (SET) - EARLY '65-'74 911 TYPE DUAL EXHAUST W-HEAT - WE WORKED WITH JOHN @ SSI TO DEVELOP THE USE OF HIS OUTSTANDING HEAT EXCHANGERS SET IN OUR 964 & 993 3.6L ENGINE CONVERSIONS TO 911 - THIS THICK HEAD FLANGE TYPE HAS A SPECIAL TAPERED INLET PORT FOR THE 3.6L HEAD, WE ALSO HAND FIT THE SET TO FIT THE 3.6L ENGINE BEFORE THESE SHIP. * WE STOCK THE PMP SPORT MUFFLER, ALONG WITH THE CORRECT O.E. HEAD TO FLANGE GASKETS, COPPER LOCK NUTS (8mm x 1.25mm W-12mm HEAD), 50mm HIGH TEMP HEATER HOSE, AND MORE. * MUFFLER SHOWN SOLD SEPARATE
Item: EXHSSI-911-36L
Price: $1792.00
Engine Oil Filter - WIX Racing
Engine Oil Filer - Spin On Type - WIX RACING (51060R) + Replacement for FRAM HP4
Item: FIL 51060R
Price: $17.50
Air Filter JC-30-80
FILTER - ENGINE AIR - ITG MEGAFLOW JC30-80 - FOAM TYPE - 2 PER CAR PORSCHE 6-BUTTERFLY / PMO - REQUIRES MOUNTING BASE PLATE PART NUMBER: FIL01JC30-PMO
Item: FIL JC30-80
Price: $98.00
Air Filter ITG JC40
FILTER - ENGINE AIR - ITG MEGAFLOW JC40-100 - FOAM TYPE - 2 PER CAR PORSCHE 6-BUTTERFLY - REQUIRES MOUNTING BASE PLATE
Item: FIL JC40-100
Price: $138.00
Brake Fluid Pentosin Racing
BRAKE-P/S FLUID - PENTOSIN RACING - EXCEEDS DOT 4 SPEC - 1 LITERPentosin Racing Brake Fluid especially appropriate for racing cars as well as for passenger cars with reduced cooling air flow; this fluid not only exceeds the DOT 4 specifications but as far as the boiling point is concerned, it also exceeds the 5.1 specifications.
Item: FLU 55 9520 109
Price: $24.00
Red Line Gear Oil 75W 90
GEAR OIL -REDLINE 75W 90 HIGH PERFORMANCE SYNTHETIC. IMPROVES DRIVE LINE EFFICIENCY FROM 2 TO 5 % PER QT
Item: FLU 83522 57904
Price: $16.00
FLU MOBIL1-1550W
ENGINE OIL - MOBILE ONE - SYNTHETIC - 15W50 - PERFORMANCE-RACE APPLICATIONS - INCLUDES DISPOSAL FEE FOR OLD OIL
Item: FLU MOBIL1-1550W
Price: $10.00
Pilot Bearing (3 Hole Flange Type) 50mm Porsche 911 930
Pilot Bearing (3 Hole Flange Type) - 50mm - PORSCHE 911 / 930 - GENUINE - MSRP: $49.33
Item: FLW 930 102 042 00 GEN
Price: $35.00
Flywheel Porsche 911 SC - 915 - 225mm
FLYWHEEL - PORSCHE 911 SC '79-'83 - STEEL - 11.60 Lbs. (5.26 Kg.) - GENUINE - LIST: $982.19
Item: FLW 930 102 215 00
Price: $523.00
FUE 911 110 197 01
ACCUMULATOR - FUEL PRESSURE - PORSCHE 911 '77-'79 / 911 TURBO '77 - 3 FITTING TYPE - BOSCH 0 438 170 009 - LIST: $190.00
Item: FUE 911 110 197 01
Price: $171.00
FUE 911 110 197 02
ACCUMULATOR - FUEL PRESSURE - PORSCHE 911 '80-'83 / 911 TURBO '76, '78-'94 - THREE FITTING TYPE - BOSCH 0 438 170 031 - LIST: $333.05
Item: FUE 911 110 197 02
Price: $342.95
FUE 911 608 102 02
FUEL PUMP - ELECTRIC - PORSCHE 911 '80-'83 / 924, TURBO FROM '81 / 911 TURBO '80-'94 (FRONT) - BLACK HOUSING - BOSCH 0 580 254 967 - LIST: $494.55
Item: FUE 911 608 102 02
Price: $438.20
FUE 928 110 147 05
FUEL FILTER - MAHLE KL 22 - PORSCHE '81-'89 911 - '81-'83 911SC - '81-'82 924 - LIST: $33.20
Item: FUE 928 110 147 05
Price: $28.22
PMO Carburetor Package - 50mm
CARBURETOR PACKAGE - PMO TRIPLE THROAT - 50 MM - OPTIONS TO BE SPECIFIED AT TIME OF ORDER - AIR CLEANER SETS SOLD SEPARATELY
Item: FUE PMO50 IDA
Price: $4200.00
PRO FUEL CELL & BLADDER - 911 - 930 Turbo
PRO FUEL CELL & BLADDER - 911 - 930 Turbo - FEATURES HOOD CENTER FILLING SYSTEM | 17 Gallon (65 Ltr.) | Case crafted with .063" Aluminum, TIG welded | Satin black finish - FUEL SAFE - PATRICK MS Designed to fill through hood center.| Pro Cell Racing Cells
- FIA FT3 certified
- Use with all hydrocarbon fuels, e.g. gasoline, diesel and avgas
- “Soft” bladder design, can be collapsed for installation
- Extremely durable
- Well suited to complex shapes, vintage vehicles, etc.
- Complete cells supplied with container (can), foam, fill plate and fittings
- Excellent choice for the racer looking for maximum durability and protection
Item: FUE SA 100CFK
Price: $2927.50
911 930 Fuel Cell - 17 Gallon
FUEL CELL - PORSCHE 911 / 930 - PRO CELL 17 GAL. (65 LTR.) - .063" TIG ALUM. - BLACK POWDER-COATED CONTAINER - INCLUDES BELLY PAN TRAY - FITTING AND SENDER UTILIZE OE HOOK UP LOCATIONS - INCLUDES STANDARD 6 X 10 STYLE FILLER PLATE WITH ALUMINUM SCREW ON CAP - FITTINGS AND HARDWARE INCLUDED - FUEL SAFE - LIST: $2771.00
Item: FUE SA100
Price: $2632.00
911 930 Fuel Cell - 27 Gallon
FUEL CELL - PORSCHE 911 / 930 - PRO CELL 27 GALLON (100 LTR.) - .063" TIG ALUMINUM CASE - BLACK POWDER-COATED CONTAINER - INCLUDES BELLY PAN TRAY - FITTING AND SENDER UTILIZE OE HOOK UP LOCATIONS - INCLUDES STANDARD 6 X 10 OE HOOK UP REMOTE STYLE FILLER PLATE - FITTINGS AND HARDWARE INCLUDED - FUEL SAFE - LIST: $2969.86 *NOTE: THIS UNIT IS ALSO AVAILABLE WITH THE STANDARD SCREW ON FILLER NECK
Item: FUE SA101
Price: $2820.00
G50 Short Bell Housing Transaxle Gearbox
Complete G50 Short Bell Housing Transaxle Gearbox - For PORSCHE 911 / 930 Turbo - Blueprinted Rebuilds / Conversions+ Contact us for professional rebuild and conversion estimates.
Item: G50-01-SBH
Price: $0.00
Muffler Gasket 911 /914
Muffler Gasket - PORSCHE 911 / 914 - Layered copper - 2 Per Car - VICTOR REINZ (50-85039-40), MSRP: $12.90
Item: GAS 901 111 193 00
Price: $7.00
GAS 911 105 902 50
GASKET SET - VALVE COVERS - PORSCHE 911 / TURBO '68-'89 & 914 6 - INCLUDES UPPER AND LOWER GASKETS, NYLOCK NUTS AND SEAL WASHER SETS - LIST: $72.50
Item: GAS 911 105 902 50
Price: $54.75
915 Transmission Gasket Set
GASKET & SEAL SET - 915 MANUAL TRANSMISSION - PORSCHE 911 '72-'86 - 912 E - LIST: $141.56
Item: GAS 915 300 911 01
Price: $127.00
Engine Block Gasket Set - 911 / Turbo
Engine Gasket Set - Engine Case (1978-1998) PORSCHE 911 / 930 - VICTOR REINZ, MSRP: $108.06+ Note:This kit comes with the original brown rear crankshaft seal. If the current OE black version is preferred, also order # 999 113 426 41
Item: GAS 930 100 901 04 VIC
Price: $54.00
Engine Block Gasket Set - 911 / Turbo Wright Wood
Engine Gasket Set - Engine Case (1978-1998) PORSCHE 911 / 930 - WRIGHTWOOD RACING - MSRP: $108.06
Item: GAS 930 100 901 04 WRI
Price: $106.00
GAS 930 100 908 02
GASKET SET - CYLINDER HEADS & TOP END - PORSCHE 911 TURBO '78-'89 - COMPLETE - VICTOR REINZ - LIST: $321.12
Item: GAS 930 100 908 02
Price: $305.06
GAS 930 300 911 00
GASKET & SEAL SET - 930 MANUAL TRANSMISSION - PORSCHE 911 TURBO '76-'88 - LIST: $116.52
Item: GAS 930 300 911 00
Price: $105.00
Rear Main Seal
Crankshaft Seal (Flywheel) 90 X 110 X 12 mm - PORSCHE - BLACK / ORANGE - ELRING - MSRP: $42.25
Item: GAS 999 113 426 41 E
Price: $28.00
AN-12 Hose End - 45 Degree
HOSE END - AN-12 TO 45 DEGREE SWIVEL - ALUMINUM - GOODRIDGE
Item: HAR 1136-4512
Price: $26.00
Union Adapter Fitting (M30 Male to AN-12 Male)
Union Adapter Fitting (M30 Male to AN-12 Male) - ST JIC-Metric - Billet Aluminum Anodized - GOODRIDGE, MSRP: $59.91
Item: HAR 306-12-M30D
Price: $38.00
Adapter Fitting AN-12 Male To 30MM Female
Union Adapter Fitting (30mm Inverted Female to AN-12 Male) - Billet Aluminum - Hard Anodized - GOODRIDGE, MSRP: $41.69
Item: HAR 730-12DFEM
Price: $30.00
Adapter Fitting AN-16 Male To 30MM Female
Union Adapter Fitting (30mm Inverted Female to AN-12 Male) - Billet Aluminum - Hard Anodized - GOODRIDGE, MSRP: $41.69
Item: HAR 730-16DFEM
Price: $32.00
Bolt - Ring Gear to Clutch Pressure Plate (8 X 42 mm)
Bolt - Ring Gear to Clutch Pressure Plate (8 X 42 mm) - 915 Transmission - 9 Per Car - GENUINE PORSCHE+ Torque Spec: 20-25 Nm (14-18 ftlb)
Item: HAR 900 067 090 02
Price: $1.50
Hex Nut - Alternator Pulley Nut / Fan Impeller - M16 x 1.00
Hex Nut - Alternator Pulley Nut / Fan Impeller - M16 x 1.00 "Fine Thread" MOTOROLA - CAD Plated Steel - PATRICK MS USA - Reproduction: NLA (No Longer Available)
Item: HAR 901 603 905 00 PM
Price: $13.00
Flywheel Bolt - Crankshaft to Flywheel 911 930
Flywheel Bolt - Crankshaft to Flywheel - M10 X 1.25 - PORSCHE 911 / 930 TURBO / 924S / 944 / 968 / CARRERA GT - 9 Per Car - O.E.M., MSRP: $6.01+ Torque Specification: 90 Nm (65 Ft Lb)
Item: HAR 930 102 206 00 OEM
Price: $2.50
Breather Hose Cloth Braided 24mm ID - Oil - Crank Ventilation
Breather Hose - 24mm I.D. - Cloth braided - Used for engine to oil tank - GERMANUNIT: .20 Qty. = 1 Meter
Item: HAR 930 107 394 5M
Price: $30.00
1.00 LBs
Hot Air Hose to Heater Control Box Red
HOSE - HOT AIR HOSE TO HEATER CONTROL BOX - PORSCHE 911 THRU '89 / 912 / 914 4 / 914 6 / 911 TURBO THRU '89 - LOPRENE RED HEAT PROOF MATERIAL - 60 X 330 MM - 2 PER CAR - SUPERSEDED PART NUMBER FROM 902 211 921 20 - GENUINE - LIST: $43.32
Item: HAR 930 211 622 01
Price: $40.00
Hot Air Hose to Heater Control Box Black
HOSE - HOT AIR HOSE TO HEATER CONTROL BOX - PORSCHE 911 THRU '89 / 912 / 914 4 / 914 6 / 911 TURBO THRU '89 - BLACK HEAT PROOF MATERIAL - 60 X 330 MM - 2 PER CAR - SUPERSEDED PART NUMBER FROM 902 211 921 20 - AFTERMARKET - LIST: $43.32
Item: HAR 930 211 622 01 BLK
Price: $40.00
Wheel Spacer Set 7mm
WHEEL SPACERS - 7MM - 911 914 930 986 993 996 997
Item: HAR14957161
Price: $92.24
HAR993 361 057 00
WHEEL LOCK SET - ALLOY WHEEL TYPE - PORSCHE - GENUINE - LIST: $58.55
Item: HAR993 361 057 00
Price: $58.00
TWIN PLUG WIRE SET - PORSCHE 911 / 930 - 8 MM WIRE
TWIN PLUG WIRE SET - PORSCHE 911 / 930 - 8 MM WIRE CONSISTING OF STAINLESS NICKEL ALLOY THAT IS WOUND 32 TIMES PER INCH OVER CONDUCTIVE LATEX COATED FIBERGLASS CORE, THIS MEETS O.E. R.F.I. (RADIO FREQUENCY INTERFERENCE). WIRE RESISTANCE IS LESS THAN 500 OHMS PER FOOT. THE WIRES ARE LABELED AND FINISHED OFF WITH A BLACK FIRE BRAID OUTER INSULATION – THIS SPECIFIC WIRE SET IS MADE FOR EARLY TYPE TWIN PLUG DISTRIBUTOR CAP (MARELLI OR BOSCH) – INCLUDES 2 x 12 INCH LENGTH COIL WIRES – ANOTHER PATRICK MOTORSPORTS EXCLUSIVE !*ENTIRE SYSTEM SHOWN FOR EXAMPLE - OTHER PARTS SOLD SEPARATELY
Item: IGN 09 612 WW
Price: $298.00
Spark Plug Wire Set
SINGLE PLUG WIRE SET - PORSCHE 911 / 930 - 8 MM WIRE CONSISTING OF STAINLESS NICKEL ALLOY THAT IS WOUND 32 TIMES PER INCH OVER CONDUCTIVE LATEX COATED FIBERGLASS CORE, THIS MEETS O.E. R.F.I. (RADIO FREQUENCY INTERFERENCE). WIRE RESISTANCE IS LESS THAN 500 OHMS PER FOOT. THE WIRES ARE LABELED AND FINISHED OFF WITH A BLACK FIRE BRAID OUTER INSULATION – THIS SPECIFIC WIRE SET IS MADE FOR EARLY TYPE DISTRIBUTOR CAP (MARELLI OR BOSCH) – INCLUDES 10 INCH LENGTH COIL WIRE – ANOTHER PATRICK MOTORSPORTS EXCLUSIVE !
Item: IGN 09-611WW
Price: $188.00
Ignition Coil Silver Bosch
IGNITION COIL - PORSCHE 911 '69-'83 / 911 TURBO '79-'89 / 914 6 - 12V - BOSCH 00 025 - LIST: $308.43
Item: IGN 901 602 502 00
Price: $168.00
IGN 911 609 050 10
IGNITION WIRE SET - BRAIDED STAINLESS STEEL COVERING - PORSCHE 911 '74-'89 & 911 TURBO '77-'89 - BERU - LIST: $576.45
Item: IGN 911 609 050 10
Price: $268.00
DISTRIBUTOR - TWIN PLUG - PORSCHE 906 / 911 - 30 MM SHAFT
DISTRIBUTOR - TWIN PLUG - PORSCHE 906 / 911 - 30 MM SHAFT FOR 3.0L & 3.3L TURBO - * WITH COUNTER CLOCKWISE ROTATION - CNC MACHINED BILLET ALUMINUM - FASHIONED AFTER ORIGINAL RSR BOSCH UNITS - INCORPORATES A NEW WIDELY AVAILABLE MARELLI CAP *Please feel free to contact us for a complete twin plug system. All parts are in stock.* COUNTER CLOCKWISE ROTATION
Item: IGN 911TPDIST30CCW
Price: $1988.00
Ignition Conversion Kit - 911 / 930
Ignition Conversion Kit - CD (Capacitive Discharge Unit) - PORSCHE 911 (1978-89) / 930 (1978-79) - PLASMA TRONICS / PERMA-TUNE - MSRP: $2500.83+ Use Bosch PN: 00 012 - Ignition Coil or Perma-Tune PN: SC 010 - Ignition Coil
Item: IGN 930 602 702 00 PLA
Price: $638.00
1.81 LBs
IGN 930 602 904 00
DISTRIBUTOR CAP - PORSCHE '76-'83 911 & -'89 911 TURBO - BMW - VOLVO - BOSCH - LIST: $18.21
Item: IGN 930 602 904 00
Price: $16.39
IGN MSD 6425
IGNITION CONTROL BOX "DIGITAL" - MDS 6AL CD, FEATURING; SOFT TOUCH REV CONTROL, HIGHER OUT PUT OF 530 VOLTS OF SPARK ENERGY, ADJUSTABLE REV. LIMITER
Item: IGN MSD 6425
Price: $303.00
IGN MSD 8202
IGNITION COIL - MSD BLASTER 2 - FOR USE WITH MSD 6AL CD IGNITION MODULE- RED HOUSING
Item: IGN MSD 8202
Price: $47.00
IGN MSD 8672
RPM MODULE - MSD 6000-8200 - FOR USE WITH MSD 6AL CD IGNITION - 2 REQUIRED FOR TWIN PLUG APPLICATIONS
Item: IGN MSD 8672
Price: $68.00
RSR Spark Plug Hold Downs for Twin Plug Porsche Engines
RSR Spark Plug Hold Downs for Twin Plug Porsche Engines, CAD plated with high temp rubber caps. 1 Set Per Engine = 6 Pieces+ Also available in singles each.
Item: IGN RSR SET
Price: $58.00
Ignition Coil for Perma-Tune CD Coversion
Ignition Coil - Recommend for use with Perma-Tune PN: PR650 1012 or PR650 1016 - CD Ignition Conversion Kit - PLASMA TRONICS - PERMA-TUNE - MSRP: $240.63
Item: IGN SC 010
Price: $180.00
1.84 LBs
TPS - Throttle Position Sensor
THROTTLE POSITION SENSOR - COUNTER CLOCKWISE TYPE - GREY
Item: INJ TWM 2900 3040
Price: $81.00
TPS - Throttle Position Sensor Plug
THROTTLE POSITION SENSOR PLUG -
Item: INJ TWM 2900 3042
Price: $16.00
INT93555-12BAPD
RACING HARNESS 5 PT KIT, 3", CAM,GN,BOLT ADJ.,PD SEWN LAP(BOLT) , GRAND NATIONAL STYLE. SHLDR(WRAP), SINGLE SUB (BOLT),SFI 16.1, BLACK
Item: INT93555-12BAPD
Price: $173.02
Oil Breather Catch Tank - 4.65 Inch (118mm) O.D.
Oil Breather Catch Tank - 4.65 Inch (118mm) O.D. - Lightweight Spun Aluminum with Internal Baffling - 2) AN-12 Female Ports & AN-06 Drain Plug - PETERSON FLUID SYSTEMS+ Includes: Insulated Stainless Steel Mounting Strap
Item: OIL 08-0400
Price: $180.00
1.50 LBs
In Line Filter Oil-Fuel AN-08
SCAVENGE FILTER - AN-08 INLINE BILLET ALUMINUM FILTER, WE USE THIS ON ALL OUR TRANSMISSIONS COOLING SYSTEMS, IT KEEPS METAL FRAGMENTS FROM RUNNING THROUGH THE OIL PUMP, COOLER AND BACK INTO THE GEARS, OUCH ! YES, THIS IS A KEY INGREDIENT TO YOUR TRANSMISSIONS LONG LIFE - PETERSON FLUID SYSTEMS
Item: OIL 09-0401
Price: $54.00
Inline Filter - Oil / Fuel - AN-12
INLINE FILTER - OIL OR FUEL - STAINLESS STEEL FILTER ELEMENT RATED AT 60 MICRON OR .0023 INCH CAPTURE PARTICLE SIZE - AN-12 IN & OUT - BILLET ALUMINUM HOUSING - RED ANODIZED - PETERSON - LIST: $183.34
Item: OIL 09-0452
Price: $173.00
OIL 10 0201 053 KIT
OIL COOLER ADAPTER KIT - FOR CONVERTING TO LATE STYLE RADIATOR OIL COOLER - INCLUDES OIL LINES AND MOUNTING HARDWARE - FOR '74-'83 PORSCHE 911 & THRU '79 911 TURBO
Item: OIL 10 0201 053 KIT
Price: $249.00
OIL 12THER
THERMOSTAT - OIL - AN-12 MALE - 180 DEGREE OPERATION - MOCAL OT2 TYPE
Item: OIL 12THER
Price: $165.00
OIL 16THER
THERMOSTAT - OIL - AN-16 MALE - 180 DEGREE OPERATION - MOCAL OT2 TYPE
Item: OIL 16THER
Price: $165.00
OIL 911 107 072 02
ENGINE OIL FILLER CAP - BAYONET TYPE - PORSCHE 911 '73-'98 / 911 TURBO THRU '97 - REUTTER - LIST: $12.53
Item: OIL 911 107 072 02
Price: $11.00
Oil S Hose - 911
Oil Hose ("S" Hose) Engine Oil Cooler to Oil Reservoir with Slip-On Connections -(1973-1989) PORSCHE 911 - GENUINE - MSRP: $49.66+ Note: If new clamps are needed, use (Qty.) (2) 999 512 091 00
Item: OIL 911 107 233 00
Price: $23.00
Oil Crossover Pipe to External Thermostat
Oil Line - Oil Crossover Pipe to External Thermostat - (1974) PORSCHE 911 - 2.7L - GENUINE PORSCHE, MSRP: $167.93
Item: OIL 911 107 729 10
Price: $117.00
Oil Line - Oil Reservoir to External Thermostat
Oil Line - Oil Reservoir to External Thermostat - (1974-1989) 911 & (1978-1979 / 1989) 911 Turbo / 930 - GENUINE, MSRP: $195.93+ Note: Only for cars with front oil cooler.
Item: OIL 911 107 730 11
Price: $70.00
Oil Crossover Pipe from Engine
Oil Crossover Pipe from Engine - (Passes under transmission) - CAD Plated Steel - Length Approx. 850mm - GENUINE PORSCHE - MSRP: $179.11
Item: OIL 911 107 739 10
Price: $119.00
Oil Line - Oil Crossover Pipe to External Thermostat
Oil Line - Oil Crossover Pipe to External Thermostat - (1975-1983) 911 - GENUINE, MSRP: $197.60+ Note: Only for cars with front oil cooler.
Item: OIL 911 107 743 12
Price: $97.00
OIL 930 107 017 00
OIL THERMOSTAT - EXTERNAL REGULATOR HOUSING FOUND IN RIGHT REAR INNER FENDER AREA - FITS PORSCHE 911 '73-'89, 930 - 911 TURBO '76 - '89 - GENUINE - LIST: $512.58
Item: OIL 930 107 017 00
Price: $478.00
OIL 930 107 040 01
OIL RETURN TUBE KIT - COLLAPSIBLE TYPE, REPLACE WITH ENGINE IN CAR WITHOUT COSTLY TEARDOWN- PORSCHE 911 THRU '98 & PORSCHE 911 TURBO THRU '97 - 4 KITS PER CAR - GENUINE - LIST: $44.97 PER KIT
Item: OIL 930 107 040 01
Price: $39.94
OIL 930 107 336 03
OIL LINE - TURBOCHARGER SCAVENGER OIL PUMP TO RESERVOIR - PORSCHE 911 TURBO '78-'89 - COHLINE - LIST: $173.73
Item: OIL 930 107 336 03
Price: $149.00
OIL 930 107 347 02
OIL PIPE - CAMSHAFT OIL LINE TO CHAIN TENSIONER - LEFT SIDE - PORSCHE 911 '83-'89 / 911 TURBO '84-OR ALL THAT HAVE BEEN UPDATED TO THE NEW OIL FED TENSOINERS'92 - COHLINE - LIST: $18.25
Item: OIL 930 107 347 02
Price: $17.50
OIL 930 107 347 03
OIL LINE - LEFT SIDE TENSIONER HOSE TO CAMSHAFT CARRIER - PORSCHE 911 '83-'89 / TURBO '84-'92 OR ALL ENGINES THAT HAVE BEEN UPDATED TO THE NEW OIL PRESSURE FED TENSIONERS- SUPERSEDED # 930 107 347 05 - USE ALSO: (1) N 020 825 1 SLEEVE & (1) 900 104 003 02 NUT - LIST: $43.40
Item: OIL 930 107 347 03
Price: $34.75
OIL 930 107 348 09
OIL PIPE - CAMSHAFT OIL LINE TO CHAIN TENSIONER - RIGHT SIDE - PORSCHE 911 '83-'89 / 911 TURBO '84-OR ALL THAT HAVE BEEN UPDATED TO THE NEW OIL PRESSURE FED TENSIONERS'92 - COHLINE - LIST: $17.00
Item: OIL 930 107 348 09
Price: $16.00
OIL 930 107 348 11
OIL LINE - RIGHT SIDE TENSIONER HOSE TO CAMSHAFT CARRIER - PORSCHE 911 '83-'89 / TURBO '84-'89 -OR ALL THAT HAVE BEEN UPDATED TO THE NEW OIL PRESSSURE FED TENSIONERS USA ALSO (1) N 020 825 1 SLEEVE & (1) 900 104 003 02 NUT - LIST: $26.48
Item: OIL 930 107 348 11
Price: $32.78
930 Oil Line - Oil Crossover Pipe to External Thermostat
Oil Line - Oil Crossover Pipe to External Thermostat - (1978-1983) PORSCHE 911 Turbo 3.3L - GENUINE PORSCHE: $179.11
Item: OIL 930 107 729 10
Price: $103.00
OIL 930 207 045 01
ENGINE OIL SUPPLY PIPE - FROM THERMOSTAT TO FRONT COOLER - PORSCHE 911 '80-'89 / 911 TURBO THRU '89 - GENUINE - LIST: $543.70
Item: OIL 930 207 045 01
Price: $505.00
OIL 930 207 046 01
ENGINE OIL RETURN PIPE - FROM THERMOSTAT TO FRONT COOLER - PORSCHE 911 '76-'89 / 911 TURBO THRU '89 - GENUINE - LIST: $543.70
Item: OIL 930 207 046 01
Price: $505.00
OIL 930 207 053 02
ENGINE OIL COOLER - RADIATOR TYPE RIGHT FRONT FENDER - APPLICATION: 911 / TURBO '74-'89 - LAENGERER & REICH - LIST $980.83 *911 '71-'83 / 911 THRU '79 USE ADAPTOR KIT: OIL 10 0201 053 LIST $ 1194.79
Item: OIL 930 207 053 02
Price: $768.00
OIL 930 207 111 00
OIL LINE - ENGINE OIL SUPPLY TUBE TO FRONT OIL COOLER - PORSCHE 911 / TURBO '84-'89 - 230 MM FLEXIBLE - GENUINE - LIST $59.33
Item: OIL 930 207 111 00
Price: $35.60
OIL 930 207 113 00
OIL LINE - ENGINE OIL RETURN TUBE TO FRONT OIL COOLER - PORSCHE 911 '74-'89 / 911 TURBO '77-'80 - FLEXIBLE - 185 MM - GENUINE - LIST: $56.40
Item: OIL 930 207 113 00
Price: $33.84
Adapter Engine Oil Feed Union
Adapter - Engine Oil Union (Feed) - Crankcase Right Side - (1989-1994) 964 / 3.6L Engines - GENUINE PORSCHE+ Use with PN: 1) 900 067 247 02 - Screw & 1) 999 707 309 40 - O-Ring & 1) 999 707 316 40 - O-Ring
+ Also for use with: (1995-1998) 993, 3.6L Engine Conversions
Item: OIL 964 207 317 00
Price: $88.00
OIL FPOR-9400
OIL COOLER PACKAGE - FRONT SPOILER MOUNT - PORSCHE 911 - 6.00" X 3.00" X 24.00" CORE SIZE - INCLUDES AN-12 STAINLESS STEEL BRAIDED OIL LINES TO 30 MM FITTINGS - B&B FABRICATION - LIST: $1223.00
Item: OIL FPOR-9400
Price: $1157.66
OIL FPOR-9500
OIL COOLER PACKAGE - PORSCHE 911 FENDER MOUNT CONVERSION - 7.00" X 2.25" X 13.00" - INCLUDES 30 MM STAINLESS STEEL BRAIDED OIL LINES - OPTIONAL THERMOSTAT AND FAN KIT AVAIL. FPOR-9600 - B&B FABRICATION - LIST: $950.00
Item: OIL FPOR-9500
Price: $898.00
Adapter Fitting - (M22 to AN-08) - For ProLine Oil Coolers
Adapter Fitting - (M22 to AN-08) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $11.00
Item: OIL SET 22-M22AN08-SE
Price: $10.00
Adapter Fitting - (M22 to AN-10) - For ProLine Oil Coolers
Adapter Fitting - (M22 to AN-10) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $11.00
Item: OIL SET 22-M22AN10-SE
Price: $10.00
Adapter Fitting - (M22 to AN-12) - For ProLine Oil Coolers
Adapter Fitting - (M22 to AN-12) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $12.00
Item: OIL SET 22-M22AN12-SE
Price: $11.00
Adapter Fitting - (M22 to AN-16) - For ProLine Oil Coolers
Adapter Fitting - (M22 to AN-16) - For ProLine Oil Coolers - Billet aluminum black anodized - Includes o-ring seal - SETRAB - MSRP: $14.00
Item: OIL SET 22-M22AN16-SE
Price: $12.00
Setrab Oil Cooler Mounting Kit - 23-6002
SETRAB 6 SERIES OIL COOLER MOUNTING KIT, LIST $44.00ProLine Mounting Bracket kits are lightweight rib-reinforced aluminum and Baja-tested. Hardy bulkhead mounting orientation incorporates 70A durameter dampening pads to completely isolate the cooler from vibration. Mounting brackets are sold in pairs, with all associated hardware.
Item: OIL SET 23-6002
Price: $41.00
Setrab Oil Cooler Mounting Kit
SETRAB 9 SERIES OIL COOLER MOUNTING KIT, LIST $ 50.00ProLine Mounting Bracket kits are lightweight rib-reinforced aluminum and Baja-tested. Hardy bulkhead mounting orientation incorporates 70A durameter dampening pads to completely isolate the cooler from vibration. Mounting brackets are sold in pairs, with all associated hardware.
Item: OIL SET 23-9002
Price: $46.00
OIL SET50-110-7612
SETRAB OIL COOLER, SIZE 6-1/2" x 3" x 2", 22mm x 1.5, LIST $ 132.00 ***GREAT POWER STEERING & TRANS COOLER!
Item: OIL SET 50-110-7612
Price: $116.00
Oil Cooler | 6.42 x 3.93 x 1.83 Inch
SETRAB OIL COOLER, SIZE 6.42" x 3.93" x 1.83", 22mm X 1.5, LIST $ 146.00
Item: OIL SET 50-113-7612
Price: $128.00
Setrab Oil Cooler 911 - 930
Oil Cooler - 8.25 X 15.25 X 2.0 | M22 x 1.50 Ports - STD 1 Series - SETRAB, MSRP: $496.00+ Rated for 300-400 HP Range | 29,000-40,000 BTU/Hr
+ Use with Spal PN: 30103013 - 5.2" Paddle Blade Low Profile Fan / 12V Pusher
* SHOWN WITH 45 DEG. FITTINGS & 22mm TO AN-12 UNIONS THAT ARE SOLD SEPARATELY
Item: OIL SET 50-150-7612
Price: $435.00
OIL SET50-619-7612
SETRAB OIL COOLER, SIZE 11.25" X 5.75" X 2.0", 22mm x 1.5, LIST $214.00
Item: OIL SET 50-619-7612
Price: $188.00
Setrab Oil Cooler 50-920-7612
SETRAB OIL COOLER, SIZE 16" x 6" x 2", 22mm x 1.5, LIST $ 256.00
Item: OIL SET 50-920-7612
Price: $225.00
Setrab Oil Cooler 50-925-7612
SETRAB OIL COOLER, SIZE 16" x 7-1/2" x 2", 22mm x 1.5, $ 320.00
Item: OIL SET 50-925-7612
Price: $281.00
Pedal Clevis Fork
CLEVIS FORK - CLUTCH CABLE AT PEDAL - PORSCHE 911 THRU '86 - GENUINE - LIST: $6.68
Item: PED 900 116 002 02
Price: $6.50
Pedal Bushing Repair Kit
Pedal Bushing Repair Kit - 911 - 912 - 914 - 930 Turbo - Complete kit includes new silicone bronze bushings for: Accelerator, Clutch Shaft, Clutch Clevis, Brake & Roll Pin - PATRICK MS, MSRP: $49.69+ Directly replaces the original equipment plastic bushings.
+ Not for cars with G50 Transmissions / hydraulic actuated clutch systems.
Item: PED 900 423 498 00
Price: $38.00
PED 911423 305 06
SPRING - CLUTCH PEDAL RETURN - PORSCHE 911 '77-'86 - GENUINE - LIST: $27.83
Item: PED 911423 305 06
Price: $27.00
Clutch Clevis Pin at Pedal
CABLE PIN - CLUTCH CLEVIS PIN AT PEDAL - PORSCHE 911 '65-'89 - GENUINE - LIST: $3.27
Item: PED 999 166 001 02
Price: $3.00
Air Injection Plug Set 911 / 930
Air Injection System Plug Set - For cylinder heads - 1974-1989 PORSCHE 911 / 930 Turbo - PATRICK MS USA+ 6X Socket Plugs - Steel, CAD Plated
+ 6X Copper Washers
Item: PKG 911 113 145 PM
Price: $16.50
930 3.6L Engine to Transmission Mounting Studs Short Bell Housing
Engine Case Stud Adapter Kit - Use to mount PORSCHE 915, G50 / 930 SBH (Short Bell Housing) Transmissions to (1978-1989) 930 Turbo 3.3L & (1990-On) 3.6L engine cases - Complete 4 Stud Set (M10) - GENUINE PORSCHE+ Application Notes: - Torque Spec: 45 Nm (33 ftlb)
Item: PKG 915 930 G50 SBH ECS
Price: $40.00
0.50 LBs
Engine Crankshaft Pulley for 964 (3.6L DME) Engine to 911 / 930 / 914 Chassis with Air Conditioner
Engine Crankshaft Pulley for 964 (3.6L DME) Engine to 911 / 930 / 914 Chassis with Air Conditioner - Billet Aluminum Mil Spec Black Anodize - PATRICK MS USA+ For (1990-1994) 964 tapered end crankshafts only - Designed for 964 RS RSR & GT-2 tapered crankshafts in 911 & 914 cars
+ Includes PN: 900 378 124 01 - Hex Head Bolt
+ Replaces PN: 964 102 050 01 - Crankshaft Pulley with Air Conditioner M64.01/02/03
+ Use with PN: 930 115 017 02 - Motor Console - (1984-1989) 911 Carrera
Item: PKG 964 36 CP AC
Price: $298.00
Engine Crankshaft Pulley for 993 (3.6L DME) Engine to 911 / 914 / 930 Chassis with Air Conditioner
Engine Crankshaft Pulley for 993 (3.6L DME) Engine to 911 / 914 / 930 Chassis with Air Conditioner - Billet Aluminum Mil Spec Black Anodize - PATRICK MS USA+ For (1994-1998) 993 non-tapered end crankshafts only
+ Includes PN: 900 378 124 01 - Hex Head Bolt
+ Replaces PN: 993 102 050 01 & 993 102 050 41 - Crankshaft Pulley with Air Conditioner
+ Use with PN: 930 115 017 02 - Motor Console - (1984-1989) 911 Carrera
Item: PKG 993 36 CP AC
Price: $298.00
Remote Oil Filter Console Mount Set - AN-12
Remote Oil Filter & Console Mount Set - Includes modular mounting bracket, fittings & filter kit - Billet Aluminum, Black Finish - SETRAB / WIX RACING / PATRICK MS USA+ Includes 2) PN: 22-ORB10AN12-00 - Adapter fitting - AN-10 ORB female to AN-12 Male
+ Includes 1) PN: 51060R - WIX Racing Filter
Item: PKG OIL FCS
Price: $140.00
911 930 Solid RSR Engine / Transmission Mount Set
Solid Engine & Transmission Bearing Mount Set - RSR Motorsport Solid Type - (1965-1989) PORSCHE 911 / Turbo - Anodized Billet Aluminum (Set = Left - Right Pair) - PATRICK MS USA
Item: PMP 911 375 043 80
Price: $86.00
0.50 LBs
Front Control Arm Set - 911 914 930
Front Control Arm Set - PORSCHE 911 / 914 / 930 Turbo Front Axle Suspension - Modified for early type through body anti sway bar - D Loop style mounts replaced with U tab style drop link connectors - Reconditioned set includes Left / Right control arms (911 Spline) complete with forward / aft bushing brackets - Black power coated finish. | PATRICK MS USAPrice Includes $200.00 CORE CHARGE, PN: CORE PMP 911 914 FCAKT - 911 Front Axle Control Arm Assembly Set
+ Include Complete Left & Right Set of: Control Arms & Bearing Retainer Brackets
Tech Tip:
IF YOU’RE LOOKING FOR MORE RESPONSIVE RIDE AND HANDLING USE THE DELRIN BUSHINGS ON ALL SUSPENSION MOUNTS. THE FACTORY RUBBER MOUNTS WILL SOFTEN WITH AGE AND THIS WILL CAUSE LOOSE AND UNRESPONSIVE HANDLING
+ Replacement Bushings available in precision machined Delrin or original style rubber.
Item: PMP 911 914 FCAKT
Price: $475.00
Hold Down Tab for Spark Plug Connector Boot - RSR Style
Hold Down Tab for Spark Plug Connector Boot - RSR Style - CAD Plated Steel with High Temp Rubber End - PATRICK MS USA - (Each) 6+ Per Engine
Item: PMP 999 RSR SPHD
Price: $10.00
Spark Plug Wire Holder - 3 Wire Holder for Twin Plug
Spark Plug Wire Holder - 3 Wire Holder - RSR Style - CAD Plated Steel with High Temp Rubber Insulator - PATRICK MS USA (Each)+ 2+ Per Engine
Item: PMP 999 RSR SPWH 3
Price: $10.00
Spark Plug Wire Holder - 6 Wire Holder for Twin Plug
Spark Plug Wire Holder - 6 Wire Holder for Twin Plug - RSR Style - CAD Plated Steel with High Temp Rubber Insulator - PATRICK MS USA (Each)+ 2+ Per Engine
Item: PMP 999 RSR SPWH 6
Price: $10.00
Fuel Filter Mounting Block - Delrin KL21
MOUNTING BLOCK - FUEL FILTER - DELRIN CONTOURED FOR MAHLE KL 21 FUEL FILTER AND ROLL BAR. DON'T JUST HOSE CLAMP YOUR FUEL FILTER TO YOUR ROLL BAR, MOUNT IT PROPERLY AND SAFELY WITH ONE OF THESE MOUNTS AND STOP WORRYING ABOUT DAMAGE AND FUEL LEAKAGE.- PATRICK MOTORSPORTS EXCLUSIVE
Item: PMP FUEBLK MOUNTING BLO
Price: $23.00
PMP G-50 5TH .923
5th GEAR SET .923SET YOUR GEAR BOX UP FOR THE TRACKS YOU RUN THE MOST AND PUT THE MOST POWER TO THE TRACK WHERE YOU NEED IT.
CALL FOR A COMPLETE QUOTE ON ALL OUR GEAR BOX AND DIFFERENTAL UPDATE CHOICES
Item: PMP G-50 5TH .923
Price: $895.00
911 914 Engine Hot Air Block Off Plate
BLOCK OFF PLATE - HOT AIR SOCKET DELETE - LEFT SIDE BEHIND DISTRIBUTOR - PORSCHE 911 2.0L-3.3L ENGINES - HAND FABRICATED METAL TYPE FASHIONED AFTER ORIGINAL EQUIPMENT SHEET METAL - SATIN BLACK POWDER COATED FINNISH - ELIMINATES HEATER DUCTING SYSTEM. THIS IS A MUST WHEN INSTALLING HEADERS, REMOVES THE HEADER DUCT ON THE FAN HOUSING AND LOOKS MUCH CLEANER THAN TRYING TO PLUG THE OUTLET -PATRICK MOTORSPORTS EXCLUSIVE --
Item: PMP HABO
Price: $138.00
Engine Crankshaft Pulley - 964 Single Belt RS / RSR Type
Engine Crankshaft Pulley - 964 / 3.6L Single Belt Conversion / RS / RSR - (1990-1994) PORSCHE 911 Carrera 2 / 4 - Billet Aluminum, Mil-Spec Black Anodized - PATRICK MS USA+ For 993 non-tapper end crankshaft
+ Use with PN: 900 378 124 01 - Hexagon Head Bolt
+ Use with: Belt 10x750
THE THREE GROVE STOCK PULLEY CANNOT BE USED ON THE 914 CONVERSTION THERE IS NOT ENOUGH ROOM. THESE PULLEYS ARE ALSO SMALLER, THIS WILL FREE UP POWER AND SLOW THE ALTERNATOR SPEED.
Item: PMP36CRPUEA
Price: $238.00
0.70 LBs
Engine Crankshaft Pulley - 993 Single Belt RS / RSR Type
Engine Crankshaft Pulley - 993 / 3.6L Single Belt Conversion / RS / RSR - (1994-1998) PORSCHE 911 Carrera 2 / 4 - Billet Aluminum, Mil-Spec Black Anodized - PATRICK MS USA+ Replaces PN: 993 102 050 40
+ For 993 non-tapper end crankshaft
+ Use with PN: 900 378 124 01 - Hexagon Head Bolt
+ Use with: Belt 10x750
THE THREE GROVE STOCK PULLEY CANNOT BE USED ON THE 914 CONVERSTION THERE IS NOT ENOUGH ROOM. THESE PULLEYS ARE ALSO SMALLER, THIS WILL FREE UP POWER AND SLOW THE ALTERNATOR SPEED.
Item: PMP36CRPULA
Price: $238.00
0.70 LBs
Engine Conversion Harness 964 3.6L DME
ENGINE CONVERSION HARNESS - PORSCHE 911 / 914 CHASSIS INTERFACE TO 3.6L (964) '90-'94 ENGINE CONTROL UNIT - FEATURES NEW ORIGINAL EQUIPMENT CONNECTIONS, FUEL PUMP RELAY AND CHECK ENGINE LIGHT WIRE. NO NEED TO SPEND ALL THE TIME TO REWIRE YOUR SELF, WE HAVE DONE THAT FOR YOU.-PATRICK MOTORSPORTS EXCLUSIVE-
*ALSO INCLUDES MODEL SPECIFIC CHASSIS JUMPER HARNESS FOR PORSCHE 914 APPLICATIONS
Item: PMP36ENGHAR9094
Price: $348.00
Front Mount Oil Cooler - 500 COM - GT / RS / RSR - Competition Single Pass
Front Mount Oil Cooler - 500 COM - GT / RS / RSR - Competition Single Pass - 4x) 3/4 NPT Ports - Size: 23.50 x 5.50 x 2.25 Inches (59.69 x 13.97 x 5.72 cm) - Black Finnish - Includes Mounting Braces - SETRAB / PATRICK MS USA EXCLUSIVE+ Specially Designed Production - Manufactured by Setrab of Sweden
* WE USE THIS COOLER ON ALL OUR HIGH PERFORMANCE & FULL RACE 914, 911, & 930 TURBO PROJECTS. THE SETRAB OIL COOLERS ARE ONE OF THE FINEST MADE, THEY ARE LIGHTWEIGHT AND THIS MEANS THEY COOL BETTER! THEY DISSIPATE OIL TEMPERATURE BETTER THAN MOST COMMON OIL COOLERS. THIS COOLER IS SET UP WITH 3/4" NPT FITTINGS 2) ON EACH END, THE FITTINGS SHOWN ARE NOT INCLUDED, BUT WE ARE ALSO A FULL LINE GOODRIDGE DISTRIBUTOR, ASK FOR THE PLUMBING HARDWARE FOR YOUR APPLICATION AND SEE IT IN USE ON MANY CARS IN THE "PROJECT" SECTION ON OUR SITE. ADDING AN EXTRA OIL COOLER TO YOUR PORSCHE WILL INCREASE PERFORMANCE AND LENGTHEN THE SERVICE LIFE OF YOUR ENGINE. THIS IS A SMALL INVESTMENT FOR HUGH PIECE OF MIND. PLEASE CALL FOR QUOTES ON ALL OUR OTHER SYSTEMS.
Item: PMP500 COM 34NPT
Price: $640.00
8.50 LBs
Engine Oil Feed Pipe Adapter - 911 S Hose to 3.6L Engines
Engine Oil Feed Pipe - 964 / 993 3.6L Engine Conversion to (-1989) 911 / 930 Oil "S" Hose - Adapter to 30mm Union at Case Half Right - CAD Plated Steel with Hardware - PATRICK MS USA+ (1995-1998) 993 Applications use with PN: PKG 911 993 OFP - Engine case union adapter kit
Item: PMP91136OP
Price: $118.00
Brake Disc Rotor Hat Adapter 911 993TT
Brake Disc Rotor Hat Adapter Set - Front Left / Right - 911 / Turbo (Narrow Body Offset) to PORSCHE 993 Twin Turbo / Carrera 4 S Rotors - Billet Aluminum Mil Spec Black Anodized - PATRICK MS USA+ Utilizes original fastener hardware - Torque to 8 Nm (6 ft lb)
+ Use with PN: 993 351 045 10 - Brake Rotor Front Left & 993 351 046 10 - Brake Rotor Front Right
+ Also use with PN: PMP911TTCM - Caliper Mount Adapter
Item: PMP911TTHAT
Price: $260.00
915 Cable Shifter System
915 Cable Shifter System - Porsche 915 Transaxle, 5-Speed 1972-1986 - Complete system, assembled with all brackets and hardware included.+ Chassis specific application - You must provide cable length from center of shifter handle to end of shift rod when ordering.
+ Please allow 7-10 business days for production.
Item: PMP915CS
Price: $888.00
993 Heater Feed Air Distributor Cover on Engine Shroud
'95-'98 993 DUAL HEATER FEED COVER FOR THE ENGINE FAN SHROUD "TOP COVER", REPLACES RUBBER FEED BOOT. BLACK WRINKLE POWDER COAT FINISH & COMES WITH BLACK RIVETS FOR INSTALL
Item: PMP993DHFC
Price: $165.00
Battery Mount for Odyssey PC 925
Battery Carrier Mount - Designed For ODYSSEY PC 925 Batteries - Black Powercoated, Fabricated Steel - Includes Mounting Hardware Kit - PATRICK MS USAWITH THIS MOUNT YOU CAN LOCATE THE BATTERY WHERE YOU NEED IT TO GET THE BEST WEIGHT DISTRIBUTION AND HOLD THE BATTERY SECURLY FOR ADDED SAFTEY.
Item: PMPBATPC925BATM
Price: $98.00
1.50 LBs
G50 SBH Anti Sway Bar Bracket Adapter Mount Spacer
Anti Sway Bar Bracket Adapter Mount Spacer - For G50 Short Bell Housing Transaxle Conversion to (1975-1988) 911 / 930 Turbo - Billet Aluminum - PATRICK MS USA + Mates to PNs: 911 501 180 00 & 911 501 180 02 - Bracket Mount for 20mm Anti Sway-Bar Stabilizers
Item: PMPG50ASBS
Price: $85.00
G50 SBH Transmission Carrier Mount
G-50 TRANSAXLE CARRIER MOUNT – FOR G50 SHORT BELL HOUSING TRANSMISSION TO 911 '69-'86 / 911 TURBO '85-'88 CHASSIS – STEEL CONSTRUCTION W- SLOTTED MOUNTING HOLES FOR ADJUSTMENT - BLACK POWDER COATED FINISH+ Use with: 2) 911 STYLE ENGINE MOUNTS STD., SPORT OR SOLID STYLE FOR RACING
-PATRICK MOTORSPORTS EXCLUSIVE -
Item: PMPG50SBH-ATM
Price: $298.00
Low Pressure Oil Light Kit 911
WARNING LIGHT - LOW OIL PRESSURE - DASH MOUNTED CLOCK REPLACEMENT - PORSCHE 911 '65-'98 - INCLUDES BLACK ANODIZED ALUMINUM BEZELDON’T DESTROY YOUR ENGINE BY MISSING THE DROP IN OIL PRESSURE WHEN YOU ARE BUSY ON THE ROAD OR TRACK THIS LIGHT WILL CATCH YOUR ATTENSION SO YOU CAN SHUT DOWN BEFORE YOU DAMMAGE YOUR ENGINE
-PATRICK MOTORSPORTS EXCLUSIVE --
Item: PMPLOPWL
Price: $58.00
Pilot Bearing - Low Profile 50mm Conversion
Pilot Bearing - Special low profile sealed bearing for 240mm conversion flywheels to G50 Short Bell Housing Transmissions - Replacement for 50mm 3-bolt bearing found on PORSCHE 911 / 930 engines. GENUINE PATRICK MS USA+ Also used for 964 / 993 Crankshaft Conversions
Item: PMPLPPB
Price: $55.00
SETRAB OIL COOLERS
Patrick Motorsports is a stocking wholesale distributor for Setrab products. Setrab offers a wide variety of cooler types and sizes. Please download the catalog for application information or choose from our exclusively made sizes for Porsche cars. Feel free to contact us for other options.
Item: SETRAB OIL COOLERS
Price: $0.00
Torsion Bar Set Rear Tubular 28mm
TORSION BAR SET - REAR TUBULAR HOLLOW - PORSCHE 911 '65-'86 - 28 MM DIAMETER - 24.6875 INCH LENGTH - SWAY-A-WAY
Item: SUS 1128 T
Price: $410.00
Torsion Bar Set Front Tubular 21mm
TORSION BAR SET - FRONT TUBULAR HOLLOW - PORSCHE 911 '65-'86 - 21 MM DIAMETER - 24.0625 INCH LENGTH - SWAY-A-WAY - LIST: $335.00
Item: SUS 1821 T
Price: $328.00
Torsion Bar Set Front Tubular 22mm
TORSION BAR SET - FRONT TUBULAR HOLLOW - PORSCHE 911 '65-'86 - 22 MM DIAMETER - 24.0625 INCH LENGTH - SWAY-A-WAY - LIST: $335.00
Item: SUS 1822 T
Price: $328.00
Strut Insert Sport Front 911 930 Turbo
Strut Insert - Bilstein B8 Sport Street - Front Left / Right - 36mm Monotube / Chrome Plated - PORSCHE 911 / 930 - BILSTEIN - MSRP: $222.60+ Note: Only for Cars with Bilstein (GREEN) Struts.
+ Old Bilstein Part Number: F4RE35050H0
Item: SUS 34-050507
Price: $165.00
3.20 LBs
SUS 901 331 059 00
BUSHING - REAR CONTROL ARM MOUNT - PORSCHE 911,912,912E, 930 THRU '89 - 4 PER CAR - GENUINE - LIST: $46.96
Item: SUS 901 331 059 00
Price: $44.61
SUS 901 331 059 00 KT
BUSHING SET - REAR TRAILING ARM MONO-BALL - PORSCHE 911/912/930 '65-'89 - SEALED MONOBALL TYPE
Item: SUS 901 331 059 00 KT
Price: $248.00
Shock Absorber Strut Assembly - Front Left
Shock Absorber Strut Assembly - Front Left - (1972-1988) 911 / 912 / 930 Turbo - OEM BILSTEIN (F4V360127H0)+ Note: Only for Cars with (Large) "A" or "S" Calipers.
Item: SUS 911 341 041 33 BIL
Price: $806.00
13.60 LBs
Shock Absorber Strut Assembly - Front Right
Shock Absorber Strut Assembly - Front Right - (1972-1988) 911 / 912 / 930 Turbo - OEM BILSTEIN (F4V360128H0)+ Note: Only for Cars with (Large) "A" or "S" Calipers.
Item: SUS 911 341 042 33 BIL
Price: $806.00
13.60 LBs
Ball Joint for Control Arm to Shock Absorber Strut
Ball Joint for Control Arm to Shock Absorber Strut - 911 / 912 / 914 / 930 - OEM LEMFOERDER (1208801) - MSRP: $134.30
Item: SUS 911 341 049 01
Price: $66.00
0.93 LBs
SUS 911 341 119 06
BOLT - FRONT BALL JOINT LOCK PIN - STRUT TO BALL JOINT - PORSCHE 911 '72-'89 / 912 E / 914 4 FROM '72 / 911 TURBO THRU '89 - 2 PER CAR - USE ALSO: 1) 999 084 019 02 - GENUINE - LIST: $17.32
Item: SUS 911 341 119 06
Price: $21.98
Front Strut Supporting Mount Set RSR 911 - 914 - Turbo
Front Strut Supporting Mount Set - RSR Solid with Spherical Mono-Ball Bearing Cartridges - Adjustable Mounting Positions with -1 Deg. Camber Offset - PORSCHE 911 / 914 / Turbo (-1989) - Mil-Spec Black Anodized Billet Aluminum - Left / Right Set - PATRICK MS USA+ NOTES: Includes damper mounting bushing hardware set.
+ Use with stock struts require PN: 999 343 012 K1
Item: SUS 911 343 002 KT
Price: $486.00
912 914 Tie Rod Assembly
TIE ROD ASSEMBLY - PORSCHE 911 THRU '89 / 912 / 914 - 2 PER CAR - LEMFOERDER - LIST: $126.60 *FOR PERFORMANCE OPTION AND CONVERSION, SEE PART NUMBER: PKG 930 347 020 00 KT2
Item: SUS 911 347 031 00
Price: $112.05
SUS 911 501 983 00
BRACKET - REAR UPDATED ANTI-SWAYBAR - MOUNT ON BODY - PORSCHE 911 / TURBO '78-'89 -2 PER CAR - LIST: $77.50
Item: SUS 911 501 983 00
Price: $84.23
SUS 911 935 R 01
SPRING PLATE PACKAGE - PORSCHE 935 TYPE FOR ALL PORSCHE 911 / 930 '69-'89 MODELS - INCLUDES BILLET ALUMINUM MOUNT GRAY ANODIZE, SPRING PLATE WITH MONO-BALL ENDS AND ALL MOUNTING HARDWARE - ADJUSTABLE TOE WITH 25 MM RAISED PIVOT OPTION - SOLD AS LEFT AND RIGHT SET
Item: SUS 911 935 R 01
Price: $938.00
SUS 911FSB
912 / 911 / 930 FRONT SHOCK TOWER BRACE, WITH ADJUSTABLE R & L HAND THREAD ROD ENDS FOR LOADING, STEEL OUTER SUPPORT BRACKETS, AND FULLY POLISHED ALUM. CENTER BAR, “THIS IS A MUST HAVE FOR YOUR 911 TARGA & CAB., OR ANY COUPE THAT GETS TO AUTOCROSS OR TRACK DAYS”
Item: SUS 911FSB
Price: $210.00
SUS 911RDLNK
DROP LINK SET - REAR ADJUSTABLE - PORSCHE 911 / 912 / 930 '65-'89 WITH '78-'89 FACTORY ANTI-SWAYBAR - MONOBALL TYPE - DIRECT REPLACEMENT FOR ORIGINAL RUBBER TYPE
Item: SUS 911RDLNK
Price: $148.00
Quick Ratio Steering Rack Assembly 911 912 914 930
Close Ratio Steering Rack Assembly - PORSCHE 914 / 911 / 912 / 930 / Turbo - Quickens Ratio 2.50 Lock to Lock - Pre assembly with QUAIFE PN: 40.435.001 - Ring & Pinon Set - Precision machined housing and ring and pinion set-up - Direct replacement pre-built unit by PATRICK MS USA+ Price Outright, No Core Required
Item: SUS 914 347 010 06 QS
Price: $1325.00
8.00 LBs
911 930 Turbo Tie Rod Package
TIE ROD PACKAGE - PORSCHE 911 TURBO - FITS PORSCHE 911 TURBO THRU '89 / CONVERSION FOR 911 THRU '89 -ALL 914- LEFT AND RIGHT - LIST: $326.34
Item: SUS 930 347 020 00 KT
Price: $298.00
SUS 930 347 031 01
TIE ROD - FRONT - PORSCHE 911 TURBO THRU '89 - LEFT OR RIGHT -2 PER CAR - LEMFOERDER - LIST: $139.16
Item: SUS 930 347 031 01
Price: $112.00
SUS 930 347 322 00
TIE ROD END - PORSCHE 911 & TURBO '76- 89' - LEFT OR RIGHT2 PER CAR - LEMFOERDER - LIST: $54.61
Item: SUS 930 347 322 00
Price: $49.00
Suspension 935 Lightweight Front
935 LIGHTWEIGHT FRONT SUSPENSION SYSTEM FOR 914, 911, 930 TO '89, INCLUDES 4130CM FRONT CONTROL ARMS (NICKEL PLATED) & CENTER CROSS MEMBER (BILLET ALUM. & ANODIZED), FITTED WITH TEFLON LINED ROD ENDS & BALL JOINTS, A MUST FOR ALL OUT COMPETITION CARS !
Item: SUS 935FSKIT
Price: $1775.00
SUS 999 333 006 K1
SHOCK MOUNT CLEVIS KIT - REAR UPPER - BILLET ALUMINUM WITH HIGH QUALITY HARDWARE - FOR USE WITH MOTORSPORT MONOBALL EYELET SHOCKS - 2 PER CAR - LIST: $289.00
Item: SUS 999 333 006 K1
Price: $258.00
911 930 935 Front Spring Hardware Kit - Adjustable
SPRING HARDWARE KIT - PORSCHE 911 / TURBO '72-'89 - FRONT COIL OVER TYPE SUSPENSION - 2.25 INCH - ONLY FOR USE WITH MOTORSPORT SHOCKS - BILLET ALUMINUM - BLACK ANODIZE - LIST: $189.00
Item: SUS 999 343 004 K1
Price: $138.00
Spring Seat Bearing
SPRING SEAT BEARING KIT - LOWER SPRING PERCH - ELIMINATES CLUNKING / BINDING SPRINGS - FOR 2.25 INCH SPRINGS - 1 KIT FOR FRONT OR REAR - LIST: $98.00
Item: SUS 999 343 006 K1
Price: $78.00
Adjustable Spring Hardware Set 911 930 Rear
Adjustable Spring Hardware Kit - Rear Suspension - For 2.25 Inch I.D. Coil Springs and M52 x 1.50 Threaded Body Dampers - Billet Aluminum Mill Spec Black Anodized - PATRICK MS USA
Item: SUS 999 343 008 K1
Price: $238.00
Shock Absorber Rear - Racing PORSCHE 934 Type - (Valving: 220 /180)
Shock Absorber Rear - Racing PORSCHE 934 Type - (Valving: 220 /180) - M52x1.50 Threaded Body / Spherical Bearing Eyelet Lower Mount - BILSTEIN+ Includes lower spring seat, jam nut & upper mounting bushing set
Item: SUS AK-18156B
Price: $378.00
911 - 930 Bilstein Shock Absorber Rear Sport
SHOCK ABSORBER - REAR - SPORT - PORSCHE 911 '72-'89 / 911 TURBO THRU '89 - YELLOW - BILSTEIN - LIST: $210.00
Item: SUS B46 975
Price: $178.00
911 930 Rear Shock Absorber Bilstein HD
SHOCK ABSORBER - REAR - HEAVY DUTY - PORSCHE 911 '72-'89 / PORSCHE 911 TURBO THRU '89 - GREEN - BILSTEIN - LIST: $165.00
Item: SUS B46-0169
Price: $152.00
911 930 934 935 Rear Shock Absorber - Racing / RSR
SHOCK ABSORBER - REAR - RACING RSR - PORSCHE 911 '72-'89 / 911 TURBO THRU '89 - ADJUSTABLE THREADED BODY RSR COIL OVER TYPE - VALVING 180/170 - BILSTEIN - MSRP: $441.00*Use with:
1) 999 343 008 K1 - Spring Hardware Kit
1) 999 343 007 K1 - Rear Lower Shock Mount Set
Item: SUS BE5-59545-HO
Price: $358.00
911 - 930 -935 Bilstein Strut Front Left Threaded Body Coil Over - RSR
STRUT - LEFT FRONT - RSR/935 COIL OVER - VALVING: 161/160 - 19 MM INCREASED SPINDLE HEIGHT - PORSCHE 911 '72-'89 "A" OR "S" CALIPER / 911 TURBO THRU '89 - 89 MM BOLT HOLE SPACING - BILSTEIN - MSRP: $999.58Other Part Number: 35-587743
Item: SUS BIL VS 1453 L
Price: $808.00
911 - 930 -935 Bilstein Strut Front Right Threaded Body Coil Over - RSR
STRUT - RIGHT FRONT - RSR/935 COIL OVER - VALVING: 161/160 - 19 MM INCREASED SPINDLE HEIGHT - PORSCHE 911 '72-'89 "A" OR "S" CALIPER / 911 TURBO THRU '89 - 89 MM BOLT HOLE SPACING - BILSTEIN - MSRP: $999.58Other Part Number: 35-587736
Item: SUS BIL VS 1453 R
Price: $808.00
911 - 914 - 930 Anti Bump Steer Kit
ANTI BUMP STEERING KIT - PORSCHE 914 / 911 / 930 - STEEL AND SPHERICAL ROD ENDS WITH AIRCRAFT QUALITY HARDWARE - SOLD AS LEFT AND RIGHT SETApplication Notes:
The anti bump steer kit works by correcting the severe angle of the tie rod end after lowering of these cars. If the anti bump kit is not installed and the car is lowered, upon compression the tie rods can pull the steering out of alignment which is called "bump steer". The racing struts also feature and update to correct this by raising the spindle position. Also most 911s benefit from replacing the tie rods with the turbo edition as well which is a direct replacement kit. So in short, if you plan to lower your car, this would be a kit for you.
Item: SUS BUMPKIT
Price: $355.00
ERS Linear Tender Spring, 2.25 Inch I.D., 150 Lbs, 2.79 Inch Length
ERS Linear Tender Spring - 2.25 Inch I.D. / 150 Lbs. - 2.79 Inch Length - EIBACH
Item: SUS EIB 0175 225 0150
Price: $110.00
Main Spring - 6 Inch Length - 2.25 Inch I.D. / 350 Lbs
Main Spring - 6 Inch Length - 2.25 Inch I.D. / 350 Lbs. - EIBACH
Item: SUS EIB 0600 225 0350
Price: $100.00
Main Spring - 6 Inch Length - 2.25 Inch I.D. / 500 Lbs
Main Spring - 6 Inch Length - 2.25 Inch I.D. / 500 Lbs. - EIBACH
Item: SUS EIB 0600 225 0500
Price: $100.00
Eibach Springs
Eibach Springs - We inventory a wide variety of Eibach products. Main rate springs and progressive tender springs are available in 2.25 and 2.50 inch I.D. in a wide variety of lengths and rates. We also machine and inventory a wide variety of spring hardware for Porsche Coil Over Systems. Please contact us for packages and set up options.
Item: SUS EIBACH SPRINGS
Price: $0.00
SUS P36 0113
STRUT INSERT - FRONT - SPORT GREEN - PORSCHE 911 '69-'85 911 & 914 - ONLY FOR CARS WITH BOGE STRUTS - BILSTEIN - LIST: $220.00 EACH
Item: SUS P36 0113
Price: $210.00
Spring Plate Bushing
911/930 '73-'89 - REAR SPRING PLATE BUSHING SET - DELRIN
Item: SUS RDSPBUSHL
Price: $138.00
Rear Anti Sway Bar 912 911 930
ANTI-SWAY BAR SYSTEM REAR - PORSCHE 912 / 911 / 930 '78-'89 - 25 MM HOLLOW LIGHTWEIGHT (STIFFNESS OF SOLID 22 MM BAR) HEAT TREATED 4130 CHROME MOLY - INCLUDES: FULLY ADJUSTABLE 6061-T6 ALUMINUM BEARING BLOCKS, DROP LINKS AND ARMS WITH ZINC PLATED STEEL HARDWARE **RECOMMEND UPDATED REAR SWAY BAR BUSHINGS, PART NUMBER: 911 501 983 00**The light-weight hollow sway bars are half the weight of a 22mm solid bar with the same stiffness. They are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability.
Bearing blocks, drop links, and swaybar arms are CNC machined from aircraft-quality 6061-T6 aluminum for its high strength/weight ratio.
Fully adjustable front and rear drop links to eliminate suspension preload.
Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.
All necessary hardware is provided in zinc plated metric class 8.8
The adjustable drop-link arm connection design provides an infinitely adjustable swaybar stiffness rate and makes it quick and easy to fine-tune your car's handling for various track conditions and driving styles.
Thermoplastic bushings impregnated with Teflon and reinforced with Kevlar provide smooth operation, long life, and high resistance to deflecting under heavy loading.
Superior ground clearance. Compair the competition.
Optimized geometry for bind free operation throughout the entire suspension range of travel.
All components are designed and manufactured to the highest quality standards, resulting in the finest and most reliable swaybar on the market.
Item: SUS RSBA22E
Price: $558.00
SUS SBRFADP2
U-BRACKET ADAPTOR SET - FRONT ANTI-SWAY BAR - WELD ON FRONT CONTROL ARMS - FOR USE WITH 914 THRU BODY FRONT ANTI-SWAY BAR & 911 / 912 / 930 '79-'89 - PAIR
Item: SUS SBRFADP2
Price: $28.25
SUS VE3 61017
STRUT - LEFT FRONT - RSR / 935 'SPECIAL UPDATED TYPE' 19 MM RAISED SPINDLE REPOSITIONED - 220/100 VALVING - - 19 MM INCREASED SPINDLE HEIGHT - PORSCHE 911 '72-'89 "A" OR "S" CALIPER / 911 TURBO THRU '89 - 89 MM BOLT HOLE SPACING - BILSTEIN - LIST: $971.00
Item: SUS VE3 61017
Price: $832.78
Spring Spacer Dividing Collar - Intermediate Inside Locating Ring
Spring Spacer Dividing Collar - Intermediate Inside Locating Ring - For use with 2.25 Inch Springs & M52 x 1.50 threaded body type dampers - Billet Aluminum / Mil-Spec Black Anodized - PATRICK MS USA - Each
Item: SUS225SC
Price: $28.00
Control Arm Bushings - Delrin
FRONT CONTROL ARM BUSHING SET ( LATE '68-'89 ) - SPORT OR RACE SEMI SOLID TYPE - PORSCHE 914 / 911 / 930 - MACHINED BLACK DELRIN "SELF LUBRICATING - NON SQUEAKING" - A PATRICK MOTORSPORTS EXCLUSIVE - REDUCES DEFLECTION UNDER LOAD AND SUITABLE FOR RACING AND HIGH TEMP APPLICATIONS
Item: SUSFDCABUSHL
Price: $108.00
Front Sway Bar System 911 912 914 930
ANTI-SWAY BAR SYSTEM FRONT - PORSCHE 912 / 914 / 911 / 930 '65-'89 - 25 MM HOLLOW LIGHTWEIGHT (STIFFNESS OF SOLID 22 MM BAR) HEAT TREATED 4130 CHROME MOLY - INCLUDES: FULLY ADJUSTABLE 6061-T6 ALUMINUM BEARING BLOCKS, DROP LINKS AND ARMS WITH ZINC PLATED STEEL HARDWARE **74-89 MODELS ALSO USE: U-BRACKET ADAPTOR - SUSSBRFADP2 & NUT PLATE ADAPTOR - SUSFSB1950 ** The light-weight hollow sway bars are half the weight of a 22mm solid bar with the same stiffness. They are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability.Bearing blocks, drop links, and swaybar arms are CNC machined from aircraft-quality 6061-T6 aluminum for its high strength/weight ratio.
Fully adjustable front and rear drop links to eliminate suspension preload.
Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.
All necessary hardware is provided in zinc plated metric class 8.8
The adjustable drop-link arm connection design provides an infinitely adjustable swaybar stiffness rate and makes it quick and easy to fine-tune your car's handling for various track conditions and driving styles.
Thermoplastic bushings impregnated with Teflon and reinforced with Kevlar provide smooth operation, long life, and high resistance to deflecting under heavy loading.
Optimized geometry for bind free operation throughout the entire suspension range of travel.
All components are designed and manufactured to the highest quality standards, resulting in the finest and most reliable swaybar on the market.
Item: SUSFSBA22F
Price: $478.00
TRA 40 309 150
DIFFERENTIAL - QUAIFE ATB - '78-'85 PORSCHE 915 TRANSMISSION & '78-'88 PORSCHE 930 TRANSMISSION - 43 TEETH FINE SPLINE
Item: TRA 40 309 150
Price: $1648.00
ATB Differential 915
ATB Differential - 1978-86 PORSCHE 911 / 915 5-Speed Transaxle & 1978-'86 & 1978-'88 PORSCHE 930 Turbo / 930 4-Speed - 43 Teeth, fine spline - WAVETRAC, MSRP: $1395.00
Item: TRA 40 309 150WT
Price: $1350.00
TRA 901 116 087 11
GUIDE TUBE - RELEASE BEARING - PORSCHE 914 / 912 / 911 - 901 TRANSMISSIONS - GENUINE - LIST: $217.48
Item: TRA 901 116 087 11
Price: $214.73
TRA 901 332 285 01
LOCKING PLATE - DIFFERENTIAL HOUSING BOLTS - PORSCHE 901 / 915 / 930 TYPE - 6 PER CAR - GENUINE - LIST: $1.23
Item: TRA 901 332 285 01
Price: $1.49
TRA 901 424 229 00
GRUB SCREW - SHIFT ROD COUPLING - PORSCHE - GENUINE - LIST: $4.97
Item: TRA 901 424 229 00
Price: $4.34
TRA 911 302 411 20
SHIFTING SLEEVE - SLIDER - PORSCHE 915 / 930 '75-88' TRANSMISSIONS 3RD - 4TH GEARS / PORSCHE 928 / TURBO 4TH TO 5TH GEARS - GENUINE - LIST: $191.73
Item: TRA 911 302 411 20
Price: $228.14
TRA 911 424 024 04
SHIFT COUPLER - SHIFT ROD - PORSCHE 911 THRU '86 / 912 / 912 E / 911 TURBO THRU '88 - GENUINE - LIST: $123.68
Item: TRA 911 424 024 04
Price: $118.00
TRA 911 424 139 00
BUSHING - GEAR SHIFT LEVER BALL SOCKET - PORSCHE - GENUINE - LIST: $7.48
Item: TRA 911 424 139 00
Price: $7.45
Shift Lever Boot (Rubber Type) - PORSCHE 911 912 930
Shift Lever Boot (Rubber Type) - PORSCHE 911 / 912 / 930 (Not for G50 Trans) - GENUINE PORSCHE - MSRP: $19.99
Item: TRA 911 424 181 01
Price: $24.00
0.51 LBs
Short Shift Kit (M241) Factory Option - (1970-1986) PORSCHE 911
Short Shift Kit (M241) Factory Option - (1973-1986) PORSCHE 911 / 915 Transmission - Reduces shifter lever travel by 20% - GENUINE PORSCHE - MSRP: $214.52+ Not for 911 Turbo / 930 4-Speed models
Item: TRA 911 424 931 00
Price: $190.00
Friction Ring for Gear Shift Rod - Bushing in Tunnel
Friction Ring for Gear Shift Rod - Bushing in Tunnel - PORSCHE 911 / 912 / 914 / 930 - GENUINE - MSRP: $15.71
Item: TRA 914 424 224 00
Price: $6.50
0.01 LBs
TRA 915 116 064 00
SPRING - OPERATING SHAFT RETURN - PORSCHE 915 TRANSMISSION - 911 '78-'86 - BOTTOM SIDE OMEGA 3 SPRING HORSESHOE - GENUINE - LIST: $120.89
Item: TRA 915 116 064 00
Price: $112.76
TRA 915 116 087 03
GUILD TUBE - PORSCHE 911 '65-'83 - 915 TRANSMISSION - GENUINE - LIST: $205.59
Item: TRA 915 116 087 03
Price: $195.00
TRA 915 116 712 01
FORK - RELEASE BEARING - PORSCHE '72-'86 911 - 915 TRANSMISSION - GENUINE - LIST: $130.54
Item: TRA 915 116 712 01
Price: $133.85
TRA 915 302 241 14
GEAR TEETH - 1ST GEAR - PORSCHE 915 TRANSMISSION '78-85' - ASYMMETRICAL UPDATE - GENUINE - LIST $279.50
Item: TRA 915 302 241 14
Price: $241.80
TRA 915 302 242 00
GEAR TEETH - 2ND GEAR - PORSCHE 915 TRANSMISSION '78-85' SYMMETRICAL UPDATE - LIST $279.50
Item: TRA 915 302 242 00
Price: $223.60
TRA 915 302 301 04
SYNCHRO RING - PORSCHE 911 '72-'85 1ST-2ND GEAR / 911 '77-'86 2ND GEAR / 912 E 1ST-2ND GEAR - GENUINE - LIST: $84.47
Item: TRA 915 302 301 04
Price: $92.25
TRA 915 302 301 06
SYNCHRO RING - PORSCHE 911 '77-'86 1ST GEAR - GENUINE - LIST: $84.89
Item: TRA 915 302 301 06
Price: $95.19
TRA 915 302 401 02
GUIDE SLEEVE - 3 POINT - 1ST TO 2ND GEAR - PORSCHE 911 '77-'86 - 915 TRANSAXLE - GENUINE - LIST: $231.86
Item: TRA 915 302 401 02
Price: $218.00
TRA 915 303 111 00
SHIFT FORK - 1ST AND 2ND GEAR - PORSCHE 911 '72-'86 / 912E / 911 TURBO THRU '77 - 915 TRANSMISSION - GENUINE - LIST: $249.18
Item: TRA 915 303 111 00
Price: $246.25
TRA 928 302 318 02
DOUBLE BRAKE BAND - SYNCHRO - 2ND GEAR - 915 / 930 TRANSMISSION - PORSCHE 911 '77-'86 / 911 TURBO '77-'88 - GENUINE - LIST: $31.16
Item: TRA 928 302 318 02
Price: $29.60
TRA 928 302 322 00
ANCHOR BLOCK - 2ND GEAR - 915 / 930 TRANSMISSION - PORSCHE 911 '77-'86 / 911 TURBO '77-'88 - GENUINE - LIST $25.14
Item: TRA 928 302 322 00
Price: $24.40
TRA 930 302 303 00
SYNCRO RING - 3 RD & 4 TH GEAR - PORSCHE 911 TURBO THRU '76-88' - GENUINE - LIST: $141.89
Item: TRA 930 302 303 00
Price: $131.03
TRA 930 302 411 02
SLIDER - SHIFTING SYNCHRO SLEEVE 1ST TO 2ND GEAR - PORSCHE 911 '78-'86 - 915 TRANSMISSION / 911 TURBO '77-'88 - 930 TRANSMISSION - A-SYMMETRICAL INNER TEETH - GENUINE - LIST: $230.92
Item: TRA 930 302 411 02
Price: $229.97
911-930 Clutch Cable
Clutch Cable - MG 07 - GEMO, MSRP: $165.90
Item: TRA 930 423 401 05
Price: $81.00
Guide Tube for Clutch Release Bearing to G50 SBH
Guide Tube for Clutch Release Bearing to G50 SBH (Short Bell Housing) Conversions - (1987-1989) G50 & G50-50 Transmissions - PATRICK MS USA+ Updated 32mm O.D. Type | Use with PN: 950 116 080 08 - Clutch Release Bearing
Item: TRA 950 116 813 PMS
Price: $130.00
0.25 LBs
LSD Inner Disc Limited Slip Differential 915 930 G50
LSD Inner Disc - Limited Slip Differential - 915 - 930 - G50 - 2.50mm thickness - GENUINE PORSCHE, MSRP: $NA+ Special Order
Item: TRA 951 332 551 00
Price: $63.00
LOCK NUT - TRANSMISSION MAIN / PINON SHAFT
LOCK NUT - TRANSMISSION MAIN / PINON SHAFT - PORSCHE 915 / G50 / G64 / G96 - LARGE NUT M30 X 1.50 - 1 OR 2 PER CAR - GENUINE - LIST: $9.80
Item: TRA 999 034 033 00
Price: $11.00
TRA 999 052 030 00
BEARING - MAIN SHAFT - PORSCHE 915 / 930 TRANSMISSION '72-88'- 4 POINT BEARING - MIDDLE - GENUINE - LIST: $196.67
Item: TRA 999 052 030 00
Price: $82.00
TRA 999 052 043 00
BEARING - PINION SHAFT - PORSCHE 911 '72-'86 / 912E - 4 POINT BEARING - MIDDLE - GENUINE - LIST: $122.18
Item: TRA 999 052 043 00
Price: $118.00
Carrier Bearing for Differential 911 / 930 / 914 / 924 / 928 / 964 / 993
Carrier Bearing for Differential - Right / Left - 911 / 930 / 914 / 924 / 928 / 964 / 993 - (50 x 80 x 20 mm) - SKF (320I0X/QVB026) - MSRP: $82.45
Item: TRA 999 059 027 00 SKF
Price: $56.50
0.90 LBs
Carrier Bearing for Differential - Left - 911 / 964 / 986 / 993 / 996
Carrier Bearing for Differential - Left - 911 / 964 / 986 / 993 / 996 - SKF - MSRP: $97.46
Item: TRA 999 059 064 00
Price: $39.00
1.15 LBs
TRA 999 110 025 00
BEARING - FRONT MAIN SHAFT CYLINDRICAL ROLLER BEARING - PORSCHE 911 '72-'86 / 912E 911 TURBO THRU '88 - GENUINE - LIST: $194.09
Item: TRA 999 110 025 00
Price: $174.00
TRA 999 201 470 00
NEEDLE CAGE BEARING -911/'65-88' ALL 914 TRANSMISSION 915 / 901 1-5TH GEAR / 930 3-4TH GEAR - GENUINE - LIST: $94.22
Item: TRA 999 201 470 00
Price: $88.00
TRA WEVO 915 GATE
WEVO GATESHIFT KIT - PORSCHE 915 TRANSMISSION - IMPROVE GEAR SELECTION ACCURACY - COMPLETE KIT WITH INSTALLATION INSTRUCTIONS - LIST: $895.00 *SORRY, NO FURTHER DISCOUNTS AVAILABLE
Item: TRA WEVO 915 GATE
Price: $886.00
Shift Joint Coupler 911 - 915 Trans
SHIFT JOINT COUPLER - PORSCHE 911 '65-'86 WITH 915 TRANS / 930 '75-'88 WITH 930 TRANS - DIRECT REPLACMENT FOR STOCK FIT AND PRECISION SHIFTING - WEVO - LIST: $195.00The WEVO Stock 911 PSJ is a direct bolt-in replacement for the original Porsche shift coupler used in 911's from 1965 to 1986 and 930's from 1975 to 1988.
The transmission side of the joint is attached to the transmission using the original M8 conical nosed set-screw from the stock coupling. The shifter side of the WEVO Stock 911 PSJ is inserted inside the shift tube, using a stump with O.E. style parallel knurling and is retained by the original pinch clamp.
The joint is zinc plated for corrosion protection and comes lightly lubricated and ready to use. The WEVO Stock 911 PSJ can be installed and adjusted in minutes.
Item: TRA WEVO STOCK 911 PSJ
Price: $195.00
911 930 Shifter for 915 901 Transmissions WEVO
SHIFTER 915 - PORSCHE 901 / 915 / 930 - 30% SHORTER - STREET / RACE - FOR INSTALLATION IN 915 SHIFTER BASE '73-'86 - SPRING LOADED - BLACK - WEVO - LIST: $595.00The WEVO Shifter is a precision short shift / spring centered / reverse blocked shift mechanisms for the 901, 915, 930 equipped 911's and 930's.
The WEVO Shifter kit is intended for street cars, club event cars and full competition race cars.
This kit can be installed in any version 915 shifter base from cars 1973 - 1986. Part # 911.424.019.05 or 911.424.019.06 (.06 preferred ~ '76 >)
The WEVO Shifter kit is an alternative to the factory short shift kit. The reduction in lever travel from the stock 915 shifter is 30% - giving the WEVO Shifter lever a neutral to in-gear movement of 2". The additional precision of the mechanism offers what feels like further reduction in shift lever travel by eliminating the free play that exists in the stock 915 shifter unit.
The WEVO Shifter lever is spring loaded from both sides and the lever will stand in the 3rd - 4th gear plane in neutral - this has a similar feel to the spring resistance of the stock shifter that is only acting on the 5th - Rev gears. This feature helps with smooth 2nd - 3rd gear upshifts and clean 5th to 4th downshifts.
The WEVO Shifter has a reverse selection blocker that is only operational when moving the lever out of 5th gear (1st on the 901 version). If you are engaging 4th gear, from 5th gear, this blocker will help prevent you from pulling the lever back and clipping reverse gear. The blocker is overridden when deliberately selecting reverse from the neutral position- such as when the car is stationary.
The use of specially designed components in the WEVO Shifter achieves a high degree of mechanical precision and almost eliminates the sloppy feeling of the volume production compromised factory parts.
Your WEVO Shifter kit comes complete and partially assembled with all hardware and instructions to install the kit. No irreversible modifications are performed to any original components and the kit will take about two hours to install including removal and re-fitting of the shifter assembly to your chassis. No special tools or skills are required.
The installation of a WEVO Shifter will be one of the most positive tactile upgrades you can perform to a 911 with a 915 transmission.
The WEVO 915 Shifter comes in Silver or Black anodized finish and Classic look. Other colors are available by special order.
Item: TRA WEVO-915 SHIFTER-B
Price: $595.00
Clutch Slave Cylinde
This “Pull Type” slave cylinder is made from billet aluminum for high strength and plated with a tough anti-corrosion finish. The stainless steel push rod has a longer stroke than most cylinders assuring a full release of the clutch. Ideal for Drag Racing, Late Model Stock, Pro Series and Off Road applications. Recommended master cylinder sizing is ¾”.
Item: TRA WIL 260-133
Price: $88.00
